QISEC121CDMA 1X USB Stick

Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. i Table of Contents Getting to Know the EC121 .................................................. 1 Requirements for the Computer ............................................ 2 Preparing the EC121............................................................ 3 Installation Guide................................................................ 4 Safety Information .............................................................. 6 1 Thank you for purchasing Huawei EC121 USB Stick (hereinafter referred to as the EC121). Note: „ This manual briefs the profiles of EC121, including the preparation, installation/uninstall process, and safety precautions. „ You are highly recommended to read the manual before using the EC121. „ The actual signal strength and the transmission rate are affected by the environment. The electromagnetic wave emitted from the PC or laptop may cause disturbance to wireless signals. When the signal is weak or the rate is not satisfying, you are recommended to use the provided USB cable. Getting to Know the EC121 This is a sketch for EC121. The actual product may differ. 1 2 3 2 USB connector Connects to the USB interface of the computer. UIM card slot Fixes and bears the UIM card. Indicator It indicates the status of the EC121. „ On, The EC121 is powered on. „ Blinking once every 2s: The EC121 is searching the network or the network is not found. „ Blinking twice every 2s: The network is found. „ Blinking once every 0.2s: The EC121 is engaged in a call or a data service. Requirements for the Computer To use the EC121, the computer must meet the following requirements. „ USB Type A Receptacle, Compatible with USB 2.0 Full Speed. „ CPU: 133 MHz or above. „ Memory: 128 MB RAM or above. „ Free space on the hard disk: 100 MB or above. „ Windows XP/2000/Vista is installed. „ Resolution for the display: 800 × 600 or above. 1024 × 768 is recommended. 3 Preparing the EC121 1. Press the right and left side of the cover, remove it, and take out the UIM card slot. 2. Insert the UIM card into the card slot, with the contact area on the card is facing down and the beveled corner on the card is facing inwards. Make sure that the UIM card is fully in place. 3. Insert the card slot with the UIM card into the EC121. 4 Installation Guide The procedure for installing the management program is subject to the operating system installed on your laptop. The following section takes Windows XP as an example. Installing the EC121 1. Connect the EC121 to the USB interface of the computer. 2. The driver runs automatically. The Welcome interface is displayed. Note: „ If the driver does not run automatically, double-click My Computer. Then double-click Mobile Partner CD-ROM to install the driver. Alternatively, open My Computer > Mobile Partner. Then double-click Autorun.exe to install it. „ If there is more than one language, the Installer Language interface is displayed. Select a language and click OK. 3. Click Next. The License Agreement interface is displayed. 4. Read the license agreement carefully. If you agree with the license agreement, select I agree.... 5 The Choose Install Location interface is displayed. 5. Choose the install directory and click Next. 6. Click Install. Mobile Partner is installed. 7. Click Finish to complete the installation. Launching the Mobile Partner After the EC121 is installed, Mobile Partner is launched automatically. Then every time the EC121 is connected to the computer, the Mobile Partner is launched automatically. You can double-click the shortcut icon of Mobile Partner to launch it. Removing the EC121 1. Log out of Mobile Partner. 2. Remove the EC121. Uninstalling the Mobile Partner 1. Click Start Menu. 2. Click Control Panel. 3. Find the management program, and click Add/Remove Program to uninstall it. Note: It is recommended to restart the computer after the uninstall to ensure that Mobile Partner is completely cleared. 6 Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device „ Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care facilities. „ Some wireless devices may affect the performance of the hearing aids. For any such problems, consult your service provider. „ If you are using an electronic medical device, consult the doctor or device manufacturer to confirm whether the radio wave affects the operation of this device. Area with Inflammables and Explosives To prevent explosions and fires in areas that are stored with inflammable and explosive devices, do not use your wireless device and observe the rules. Areas stored with inflammables and explosives include but are not limited to the following: „ Gas station „ Fuel depot (such as the bunk below the deck of a ship) 7 „ Container/Vehicle for storing or transporting fuels or chemical products „ Area where the air contains chemical substances and particles (such as granule, dust, or metal powder) „ Area indicated with the "Explosives" sign „ Area indicated with the "Power off bi-direction wireless equipment" sign …

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISEC121 to be kept confidential: 1. Schematic diagram . 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Ture-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2008-02-20 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISEC121 Product Name: CDMA 1X USB Stick Product Model: EC121 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public. CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely,

EC121 SECRET Page1,Total 5 External Photos of HUAWEI EC121 EC121 SECRET Page2,Total 5 EC121 SECRET Page3,Total 5 EC121 SECRET Page4,Total 5 EC121 SECRET Page5,Total 5

EC121 SECRET Page1, Total 1 ID Label Location_EC121

EC121 SECRET Page1,Total 6 Internal Photos of HUAWEI EC121 EC121 SECRET Page2,Total 6 EC121 SECRET Page3,Total 6 EC121 SECRET Page4,Total 6

EC121 SECRET Page5,Total 6 EC121 SECRET Page6,Total 6

EMC Test Report of EC121 Report No: SYBH (R) EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total22 EMC Test Report Product Name: CDMA 1X USB Stick Model Number: EC121 Report No: SYBH (R) 002122007EB-1 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 EMC Test Report of EC121 Report No: SYBH (R) EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total22 Notice 1 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. EMC Test Report of EC121 Report No: SYBH (R) EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total22 Notice 2 Modification Information: . Table 1 Modification Information 1 2 3 4 5 6 Modification Information 7 EMC Test Report of EC121 Report No: SYBH (R) EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total22 REPORT ON EMC Test of CDMA 1X USB Stick M/N: EC121 REGULATION FCC CFR47 Part 15: Subpart B; FCC CFR47 Part 22 Subpart H; START OF TEST Jan.10, 2008 END OF TEST Jan.20, 2008 Final Judgement: Pass Approver 2008-01-24 Date Name Signature Reviewer 2008-01-22 Date Name Signature Operator 2008-01-22 Date Name Signature EMC Test Report of EC121 Report No: SYBH (R) EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total22 REPORT BODY CONTENT 1 Status...................................................................................................................................... 6 1.1 Product Information................................................................................................................. 6 1.2 Applied Standard..................................................................................................................... 6 1.3 Test Site .................................................................................................................................. 7 1.4 Test environment condition .....................................................................................................7 2 Summary of Results................................................................................................................ 8 3 Equipment Specification .........................................................................................................9 3.1 General Description ................................................................................................................ 9 3.2 Technical Data ........................................................................................................................ 9 3.3 Sub-Assembly Identity ............................................................................................................ 9 4 System Configuration during EMC Test ................................................................................ 10 4.1 Cables Used during Test ...................................................................................................... 10 4.2 Associated Equipment Used during Test .............................................................................. 10 4.3 Test Configurations and Test Mode ...................................................................................... 10 4.4 Test conditions and test Connections ................................................................................... 10 5 Electromagnetic Interference (EMI) ...................................................................................... 12 5.1 Radiated Disturbance 30MHz to 1000MHz........................................................................... 12 5.2 Conducted Disturbance 0.15 MHz to 30MHz........................................................................ 13 5.3 Radiated Spurious Emissions ............................................................................................... 14 6 Main Test Instruments ..........................................................................................................16 7 System Measurement Uncertainty ........................................................................................ 17 8 Graph and Data of Emission Test ......................................................................................... 18 8.1 Radiated Disturbance ..........................................................................…

Text truncated - open the document above for the full version.

FCC Test Report of EC121 FCC ID: QISEC121 Security Level: secret Report No: SYBH(E) 002122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total7 Photo of EUT FCC Test Report of EC121 FCC ID: QISEC121 Security Level: secret Report No: SYBH(E) 002122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total7 EC121 Appearance FCC Test Report of EC121 FCC ID: QISEC121 Security Level: secret Report No: SYBH(E) 002122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total7 Photos of Test Setup FCC Test Report of EC121 FCC ID: QISEC121 Security Level: secret Report No: SYBH(E) 002122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total7 1 1Radiated Emissions Radiated Disturbance Emissions (TC1) Radiated Disturbance Emissions (TC2) FCC Test Report of EC121 FCC ID: QISEC121 Security Level: secret Report No: SYBH(E) 002122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total7 2 Radiated Spurious Emissions Radiated Spurious Emission 30M~2GHz(TC1) Radiated Spurious Emission 2G~18GHz (TC1) FCC Test Report of EC121 FCC ID: QISEC121 Security Level: secret Report No: SYBH(E) 002122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total7 Radiated Spurious Emission-30M~2GHz(TC2) Radiated Spurious Emission-2G~18GHz (TC2) FCC Test Report of ETS8221 FCC ID: QISETS8221 Security Level: Public Report No: SYBH(R)001122007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total7 3 Conducted Emissions Conducted Emissions for AC Ports