QISEC226CDMA EV-DO USB Modem

Copyright © 2007 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, expressed or implied. i Table of Contents Getting to Know Your EC226 1 Requirements for the Computer 2 Getting the EC226 Ready 3 Installation Guide 3 Warnings and Precautions 5 Technical Specifications 8 1 Thank you for purchasing Huawei EC 226 EV-DO USB Modem (hereinafter referred to as EC226). EC226 is a wireless device based on the CDMA2000 1x and CDMA2000 1xEV-DO Rev. A protocols. From your computer, you can communicate with all benefits of CDMA technology on CDMA networks at a high speed. EC226 provides data transmission at up to 3.1 Mbit/s download with receiving diversity technology, and up to 1.8 Mbit/s upload. Note : Download and Upload speeds may vary based on network and environmental factors. This manual briefs the profiles of EC226, including the preparation, installation/uninstall process, and safety precautions. You are highly recommended to read the manual before using the EC226. Getting to Know Your EC226 This is a sketch for EC226. The actual product may differ. USB int erf ace USIM/SIM card slot Indicat or 2 Indicator Indicates the status of the EC226. Indicator Status Description On The EC226 is powered on. Blinking once every 2s y The EC226 is searching the network. y The network is not found. Blinking twice every 2s The network is found. Blinking once every 0.2s The EC226 is engaged in a call or a data service. Off The EC226 is removed, powered down, or reset. 3 Requirements for the Computer To correctly install and use EC226, the following configurations for the computer are required. Item Required Configuration USB interface USB 2.0 Full Speed CPU 866 MHz Pentium or above Memory 128 MB or above Free space on the hard disk 100 MB or above Operating system Windows XP, Windows 2000 or Window Vista Screen resolution 1024 × 768 is recommended Note : Improper configurations may degrade the computer performance. Make sure that the computer configurations meet the requirements. For Windows XP, it is recommended to inst all patches such as Service Pack 2 or above. For Windows 2000, it is recommended to install patches such as Service Pack 4 or above. Getting the EC226 Ready Note : Make sure whether your EC226 need a UIM card, contact your service provider. If your EC226 need a UIM card, insert the UIM card into EC226 as follows. 1. Remove the User Identity Module (UIM) card slot from the EC226. Then insert the UIM card into the card slot. Make sure that the UIM card is fully in place. 2. Insert the card slot into the EC226. 4 Installation Guide The procedure for installing is subject to the operating system installed on your computer. The following section takes Windows XP as an example. If there is any difference, follow th e actual installation prompts. Connecting the EC226 with a Computer Note : First, power on a computer. Then connect the EC226 with the computer. Otherwise, the normal installation of the EC226 can be affected. The following figure is the sketch map of the data cable. Auxiliary USB data cable Main USB data cable Mini-USB Connetor 1. Plug the mini-universal series bus (USB) connector into the EC226. 2. Plug the connectors of the main USB data cable and the auxiliary USB data cable into the USB interfaces of the computer. 5 Installing the Management Program 1. Connect the EC226 with the computer. 2. The OS auto detects and recognizes new hardware and starts the installation wizard. Note : If the auto-run program does not respond, go to the driver path. Find and double-click the AutoRun.exe , and then the program will run. 3. Follow the prompts of the installation wizard. 4. After the program is installed, the shortcut icon for management program is displayed on the desktop. Removing the EC226 Follow these steps strictly to remove the EC226 from your PC. Otherwise, your system may be damaged, even if it is in the standby mode. Note : Before removing the EC226, you need to log out of the management program first. 1. Double-click in the system tray. The Safely Remove Hardware interface is displayed. 2. Select Huawei Device (actual name based on the name displayed in this menu – "Huawei Mobile Connect - 3G Modem" for example) in the Hardware devices list, and click Stop . The Stop a Hardware device interface is displayed. 3. Click OK . 4. When the Safe To Remove Hardware prompt is displayed, click OK and remove the EC226. Starting the Management Program Double-click the shortcut icon on the desktop to start the management program. Uninstalling the Management Program 1. Click Start Menu. 6 2. Click Control Panel . 3. Find the management program, and click Add/Remove Program to uninstall it. 7 Warnings and Precautions Please read the safety information carefully to ensure the correct and safe use of your wireless device. General Recommendations for Use Always handle your wireless device with care and keep it in a clean and dust-free place. Do not expose your wireless device to open flames or lit tobacco products. y Always keep your wireless device dry. y Do not drop, throw or try to bend your wireless device. y Do not paint or scratch your wireless device. y Do not attempt to disassemble your wireless device. Doing so will void warranty. Only authorized personnel are allowed to do so. y Use approved accessories only. Do not connect your wireless device to any incompatible products. Laws and Regulations y Do not op…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: EMCC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISEC226 to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page1,Total 5 External Photos of HUAWEI EC226 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page2,Total 5 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page3,Total 5 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page4,Total 5 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page5,Total 5

HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page2,Total 5

HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page1,Total 5 Internal Photos of HUAWEI EC226 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page2,Total 5 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page3,Total 5 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page4,Total 5 HUAWEI EC226 CDMA EV-DO Rev. A USB MODEM SECRET Page5,Total 5

FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total7 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total7 Channel 283TM1 FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total7 Channel 283TM3 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total7 Channel 283Subtype 0 HPSK Channel 283Subtype 2 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total7 The R-Data packet size determines the modulation format R-Data Pkt Size 256 bitsBPSK FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total7 R-Data Pkt Size 4096 bits QPSK FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total7 R-Data Pkt Size 12288 bits8PSK FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total13 Appendix B Occupied Bandwidth According to FCC Part 2.1049 & Part 22 Subpart H FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total13 Channel 1013TM1 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total13 Channel 1013TM3 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total13 Channel 1013EVDO subtype 0 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total13 Channel 1013EVDO subtype 2 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total13 Channel 283TM1 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total13 Channel 283TM3 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page8, Total13 Channel 283EVDO release 0 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page9, Total13 Channel 283EVDO Subtype 2 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page10, Total13 Channel 777TM1 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page11, Total13 Channel 777TM3 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page12, Total13 Channel 777EVDO subtype 0 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page13, Total13 Channel 777EVDO Subtype 2 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total13 Appendix C Band Edges Compliance According to FCC Part 2.1051 & 22.917 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total13 TM1 Left Edge (824 MHz) Channel 1013 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total13 Right Edge (849MHz) Channel 777 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total13 TM3 Left Edge (824 MHz) Channel 1013 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total13 Right Edge (849MHz) Channel 777 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total13 EVDO Subtype 0 Left Edge (824 MHz) Channel 1013 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total13 Right Edge (849MHz) Channel 777 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page8, Total13 EVDO Subtype 2 ModulationBPSK Left Edge (824 MHz) Channel 1013 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page9, Total13 Right Edge (849MHz) Channel 777 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page10, Total13 ModulationQPSK Left Edge (824 MHz) Channel 1013 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page11, Total13 Right Edge (849MHz) Channel 777 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page12, Total13 Modulation8PSK Left Edge (824 MHz) Channel 1013 Right Edge (849MHz) FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page13, Total13 Channel 777 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total73 Appendix D Spurious Emission at Antenna Terminal According to FCC Part 2.1051 & 22.917 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Informatio…

Text truncated - open the document above for the full version.

Report No: SYBH(R) 161082007EB-1 FCC ID: QISEC226 FCC TEST REPORT OF HUAWEI CDMA EV-DO Rev.A 800MHz USB MODEM M/N: EC226 Aug. 18, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH(R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total45 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH(R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total45 Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HUAWEI EC226 CDMA EV-DO Rev A 800MHz USB Modem M/N: EC226 Report No: SYBH (R) 161082007EB-1 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 9 items need to be tested, 9 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2007.08.20 Date Name signature Technical Responsibility For Area of Testing 2007.08.20 Date Name signature Test Lab Engineer 2007.08.20 Date Name signature Report No: SYBH(R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total45 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description.................................................................................................................................. 6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 9 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 9 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 11 5 Main Test Instruments............................................................................................................................. 12 6 Transmitter Measurements..................................................................................................................... 13 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................... 13 6.2 CONDUCTED POWER OF TRANSMITTER................................................................................................. 15 6.3 MODULATION CHARACTERISTICS.......................................................................................................... 18 6.4 OCCUPIED BANDWIDTH........................................................................................................................ 20 6.5 BAND EDGES COMPLIANCE.................................................................................................................. 23 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 25 6.7 RADIATED SPURIOUS EMISSION........................................................................................................... 28 6.8 FREQUENCY STABILITY........................................................................................................................ 32 7 EMC Test.................................................................................................................................................. 39 7.1 CONDUCTED EMISSION AT POWER PORT.............................................................................................. 39 7.2 RADIATED EMISSION OF ENCLOSUR…

Text truncated - open the document above for the full version.

FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total7 Appendix A Modulation Characteristics According to FCC Part 2.1047& Part 24 Subpart E FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total7 Channel 600TM1 FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total7 Channel 600TM3 FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total7 Channel600Subtype 0 HPSK FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total7 Channel600Subtype 2 The R-Data packet size determines the modulation format R-Data Pkt Size 256 bitsBPSK FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total7 R-Data Pkt Size 4096 bitsQPSK FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total7 R-Data Pkt Size 12288 bits8PSK FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total13 Appendix B Occupied Bandwidth According to FCC part 2.1049 & Part 24 Subpart E FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total13 Channel 25 (TM1) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total13 Channel 25 (TM3) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total13 Channel 25(EVDO subtype 0) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total13 Channel 25 (EVDO Subtype 2) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total13 Channel 600(TM1) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total13 Channel 600(TM3) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page8, Total13 Channel 600 (EVDO subtype 0) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page9, Total13 Channel 600(EVDO subtype 2 ) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page10, Total13 Channel 1175(TM1) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page11, Total13 Channel 1175(TM3) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page12, Total13 Channel 1175(EVDO subtype 0) FCC ID: QISEC226 Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page13, Total13 Channel 1175(EVDO subtype 2) FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total13 Appendix C Band Edges Compliance According to FCC Part 2.1051 & 24.238 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total13 TM1 Left Edge (1850 MHz) Channel 25 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total13 Right Edge (1910MHz) Channel 1175 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total13 TM3 Left Edge (1850 MHz) Channel 25 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page5, Total13 Right Edge (1910MHz) Channel 1175 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page6, Total13 EVDO subtype 0 Left Edge (1850 MHz) Channel 25 Right Edge (1910MHz) FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page7, Total13 Channel 1175 EVDO subtype 2 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page8, Total13 ModulationBPSK Left Edge (1850 MHz) Channel 25 Right Edge (1910MHz) FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page9, Total13 Channel 1175 ModulationQPSK FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page10, Total13 Left Edge (1850 MHz) Channel 25 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page11, Total13 Right Edge (1910MHz) Channel 1175 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page12, Total13 Modulation8PSK Left Edge (1850 MHz) Channel 25 Right Edge (1910MHz) FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page13, Total13 Channel 1175 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page1, Total55 Appendix D Spurious Emission at Antenna Terminal According to FCC Part 2.1051 & 24.238 FCC ID: QISEC226 Report No: SYBH (R) 161082007EB-1 Confidential…

Text truncated - open the document above for the full version.

Report No: SYBH(R) 161082007EB-1 FCC ID: QISEC226 FCC TEST REPORT OF HUAWEI CDMA EV-DO Rev.A 1900MHz USB Modem M/N: EC226 Aug. 18, 2007 Reliability Laboratory of Huawei Technologies Co., Ltd. All Right Reserved Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total45 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C1758, R1672, and T153. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total45 Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HUAWEI EC226 CDMA EV-DO Rev.A 1900MHz USB Modem M/N: EC226 Report No: SYBH(R) 161082007EB-1 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; FCC CFR47 Part 15: Subpart B; CONCLUSION There are 9 items need to be tested, 9 items have been tested. The sample of the model completely meets the requirements Final Judgement: Pass General Manager 2007.08.20 Date Name signature Technical Responsibility For Area of Testing 2007.08.20 Date Name signature Test Lab Engineer 2007.08.20 Date Name signature Report No: SYBH (R)161082007EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total45 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 7 3 Test Site Description................................................................................................................................. 8 3.1 TESTING PERIOD................................................................................................................................... 8 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 8 4 Product Description.................................................................................................................................. 9 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 9 4.2 EUT IDENTIFICATION LIST..........................................…

Text truncated - open the document above for the full version.