QISEC50723G/4G Dual Mode Wireless Router

©2011 Sprint. SPRINT and the logo are trademarks of Sprint. Other marks are the property of their respective owners. 4/8/11 www.sprint.com User's Guide 3G/4G Dual Mode Wireless Router PCDH5072HS Sprint UG_032511 i Introduction This User's Guide introduces you to Sprint ® service and the features of your router. It’s divided into six sections: Section 1: Getting Started Section 2: Your Router Section 3: Quick Start Guide Section 4: Web management page Section 5: Resources Section 6: Safety and Warranty Information Legal Notice Copyright © Sprint and its licensors. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Sprint and its licensors. The product described in this manual may include copyrighted software of Sprint and its possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions Sprint, sprint, SPRINT and the logo are trademarks or registered trademarks of Sprint. Other trademarks, product, service and company names mentioned are the property of their respective owners. Note:Because of updates in the router software, this user's guide may not be the most current version for your router. Visit www.sprint.com and sign on to My Sprint to access the most recent version of the user's guide. WARNING:Please refer to the Important Safety Information section on page 16 to learn about information that will help you safely use your router. Failure to read and follow the Important Safety Information in this user's guide may result in serious bodily injury, death, or property damage. ii Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Sprint reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL SPRINT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Section 1 Getting Started 21A. Setting Up Service Setting Up Your Router (page 2) Activating Your Router (page 3) Sprint Account Passwords (page 3) Getting Help (page 4) Setting Up Your Router 1.Remove the back cover. Simply slide the cover down (in the direction of the arrow in Figure A). You may hear a click sound. 2.Install the battery. Remove the battery from its packaging. As shown in Figure B, Insert the battery into the opening in the back of the router, making sure the connectors align, and gently press down to secure the battery. 3.Install the back cover onto your router. Place the back cover on the back of the router, then slide up (in the direction of the arrow in Figure C). You may hear a pop sound. 4.Press on the right side of the router for about 3 seconds to turn the router on. If your router is activated, it will turn on, search for Sprint service, and ready for Internet connection. If your router is not yet activated, see “Activating Your Router” on page 3 for more information. 5.Make your first wireless connection with a wireless client through Wi-Fi. Double press on the right side of the router, the Wi-Fi SSID and the key of the router displays 1A. Setting Up Service Figure AFigure B Figure C 1A. Setting Up Service3 Setting Up Service on the screen for about five seconds. Take down the SSID and the network key. From a wireless client such as a PC on which a wireless network adapter is installed, seach for the wirelss network of the router which is named with the SSID you have taken down. Connect the wireless client to the Wireless network of the router with the key you have taken down. Activating Your Router If you purchased your router at a Sprint Store, it is probably activated and ready to use. If you received your router in the mail and it is for a new Sprint account or a new line of service, it is designed to activate automatically. To confirm your activation, make a wireless connection with a wireless client. If you received your router in the mail and you are activating a new router for an existing number on your account , you will need to go online to activate your new router. From your computer’s Web browser, go to www.sprint.com/activate and complete the onscreen instructions to activate your router. When you have finished, make a wireless connection with a wireless client to confirm your activation. If your router is still not activated or you do not have access to the Internet, contact Sprint Customer Service at 1- 888-211-4727 for assistance. Sprint Account Passwords As a Sprint customer, you enjoy unlimited access to your personal account information and your data services account. To ensure that no one else has access to your information, you wi…

Text truncated - open the document above for the full version.

©2011 Sprint. SPRINT and the logo are trademarks of Sprint. Other marks are the property of their respective owners. 3/8/11 www.sprint.com User's Guide 3G/4G Dual Mode Wireless Router PCDH5072HS Sprint UG_021511 i Introduction This User's Guide introduces you to Sprint ® service and the features of your router. It’s divided into four sections: Section 1: Getting Started Section 2: Installing and Startup Section 3: Quick Start Guide Section 4: Safety and Warranty Information Legal Notice Copyright © Sprint and its licensors. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Sprint and its licensors. The product described in this manual may include copyrighted software of Sprint and its possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions Sprint, sprint, SPRINT and the logo are trademarks or registered trademarks of Sprint. Other trademarks, product, service and company names mentioned are the property of their respective owners. Note:Because of updates in the router software, this user's guide may not be the most current version for your router. Visit www.sprint.com and sign on to My Sprint to access the most recent version of the user's guide. WARNING:Please refer to the Important Safety Information section on page 16 to learn about information that will help you safely use your router. Failure to read and follow the Important Safety Information in this user's guide may result in serious bodily injury, death, or property damage. ii Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Sprint reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL SPRINT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Section 1 Getting Started 21A. Setting Up Service Setting Up Your Router (page 2) Activating Your Router (page 3) Sprint Account Passwords (page 3) Getting Help (page 4) Setting Up Your Router 1.Remove the back cover. Simply slide the cover down (in the direction of the arrow in Figure A). You may hear a pop sound. 2.Install the battery. Remove the battery from its packaging. As shown in Figure B, Insert the battery into the opening in the back of the router, making sure the connectors align, and gently press down to secure the battery. 3.Install the back cover onto your router. Place the back cover on the back of the router, then slide up (in the direction of the arrow in Figure C). You may hear a click sound. 4.Press on the right side of the router to turn the router on. If your router is activated, it will turn on, search for Sprint service, and enter standby mode. If your router is not yet activated, see “Activating Your Router” on page 3 for more information. 5.Make your first wireless connection with a wireless client through Wi-Fi. Press on the right side of the router for about two seconds, and then the Wi-Fi SSID and the key 1A. Setting Up Service Figure AFigure B Figure C 1A. Setting Up Service3 Setting Up Service of the router displays on the screen for about five seconds. Take down the SSID and the network key. From a wireless client such as a PC on which a wireless network adapter is installed, seach for the wirelss network of the router which is named with the SSID you have taken down. Connect the wireless client to the Wireless network of the router with the key you have taken down. Activating Your Router If you purchased your router at a Sprint Store, it is probably activated and ready to use. If you received your router in the mail and it is for a new Sprint account or a new line of service, it is designed to activate automatically. To confirm your activation, make a wireless connection with a wireless client. If you received your router in the mail and you are activating a new router for an existing number on your account , you will need to go online to activate your new router. From your computer’s Web browser, go to www.sprint.com/activate and complete the onscreen instructions to activate your router. When you have finished, make a wireless connection with a wireless client to confirm your activation. If your router is still not activated or you do not have access to the Internet, contact Sprint Customer Service at 1- 888-211-4727 for assistance. Sprint Account Passwords As a Sprint customer, you enjoy unlimited access to your personal account information and your data services account. To ensure that no one else has Note:Your router’s battery should have enough charge for your router to turn on and…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 Date: 2011-03-28 General Declaration FCC ID: QISEC5072 We, Huawei Technologies Co., Ltd declares that the device does not have “Ad Hoc on non-US frequencies” while applying for the following product. If you have any questions regarding the declaration, please don’t hesitate to contact us. Thank you! Sincerely yours, Zhang Xinghai / EMC Laboratory Manager Huawei Technologies Co., Ltd TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 E-mail: [email protected]

Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 DECLARATION LETTER Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: April 11, 2011 Subject: Declaration letter for label requirement FCC ID: QISEC5072 The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! Zhang Xinghai / EMC Laboratory Manager Huawei Technologies Co., Ltd TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 E-mail: [email protected]

Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 DECLARATION LETTER Date: April 20, 2011 FCC ID: QISEC5072 To whom it may concern: We, Huawei Technologies Co., Ltd declare that For PCDH5072HS, EC5072 hardware configuration, the maximum ratio of DL: UL is 29:18. Sincerely yours, Zhang Xinghai / EMC Laboratory Manager Huawei Technologies Co., Ltd TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 E-mail: [email protected]

Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 Date: March 28, 2011 FCC ID: QISEC5072 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Part Lists Operational Description Tune-up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Zhang Xinghai / EMC Laboratory Manager Huawei Technologies Co., Ltd TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 E-mail: [email protected]

Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 Date: March 29, 2011 FCC ID: QISEC5072 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to DA 04-1705 of the commission’s public notice, we request short-term confidential treatment for the following information until 06/29/2011in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, Zhang Xinghai / EMC Laboratory Manager Huawei Technologies Co., Ltd TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 E-mail: [email protected]

Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 Date: March 28, 2011 AUTHORIZATION LETTER To whom it may concern: We, the undersigned Huawei Technologies Co., Ltd hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Zhang Xinghai / EMC Laboratory Manager Huawei Technologies Co., Ltd TEL.: 86-755-2878-1879 FAX: +86-755-2878-1889 E-mail: [email protected]

QISEC5072 SECRET Page1，Total3 Photo Documentation of External of Product QISEC5072 SECRET Page2，Total3 QISEC5072 SECRET Page3，Total3

QISEC5072 SECRET Page1，Total1 QISEC5072 Label location:

QISEC5072 SECRET Page1，Total1 Label

QISEC5072 SECRET Page1，Total6 Photo Documentation of Interior of Product QISEC5072 SECRET Page2，Total6 QISEC5072 SECRET Page3，Total6 QISEC5072 SECRET Page4，Total6 QISEC5072 SECRET Page5，Total6 QISEC5072 SECRET Page6，Total6

Report No.: SA110315C19 1 Report Format Version 4.0.0 SAR TEST REPORT REPORT NO.: SA110315C19 MODEL NO.: PCDH5072HS, EC5072 FCC ID: QISEC5072 RECEIVED: Mar. 08, 2011 TESTED: Mar. 17, 2011 ISSUED: Mar. 23, 2011 APPLICANT: Huawei Technologies Co., Ltd. ADDRESS: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 28 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: SA110315C19 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD........................................................................................... 3 1. CERTIFICATION ........................................................................................................... 4 2. GENERAL INFORMATION ........................................................................................... 5 2.1 GENERAL DESCRIPTION OF EUT ............................................................................. 5 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS............................................... 6 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM ..................................................... 7 2.4 TEST EQUIPMENT..................................................................................................... 10 2.5 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION .................. 11 2.6 DESCRIPTION OF SUPPORT UNITS........................................................................ 14 3. DESCRIPTION OF ANTENNA LOCATION................................................................. 15 4. RECIPES FOR TISSUE SIMULATING LIQUIDS........................................................ 16 5. SYSTEM VALIDATION................................................................................................ 19 5.1 TEST PROCEDURE ................................................................................................... 19 5.2 VALIDATION RESULTS .............................................................................................. 20 5.3 SYSTEM VALIDATION UNCERTAINTIES .................................................................. 21 6. TEST RESULTS.......................................................................................................... 22 6.1 TEST PROCEDURES................................................................................................. 22 6.2 CONDUCTED POWER............................................................................................... 24 6.3 DESCRIPTION OF TEST CONDITION ...................................................................... 24 6.4 MEASURED SAR RESULT ........................................................................................ 24 6.5 POWER DRIFT TABLE ............................................................................................... 25 6.6 NO SIMULTANEOUS SAR JUSTIFICATION .............................................................. 26 6.7 SAR LIMITS ................................................................................................................ 27 7. INFORMATION ON THE TESTING LABORATORIES................................................ 28 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report No.: SA110315C19 3 Report Format Version 4.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release N/A Mar. 23, 2011 Report No.: SA110315C19 4 Report Format Version 4.0.0 1. CERTIFICATION PRODUCT: 3G/4G Dual Mode Wireless Router MODEL: PCDH5072HS, EC5072 BRAND: Sprint, Huawei APPLICANT: Huawei Technologies Co., Ltd. TESTED: Mar. 17, 2011 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 Issue 4 (2010-03) October 2010 TCB workshop RF Exposure Procedures Update Tracking Number: 189685 for hot spot PBA The above equipment (model: PCDH5072HS) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Mar. 23, 2011 Pettie Chen / Specialist APPROVED BY : , DATE :Mar. 23, 2011 Gary Chang / Assistant Manager Report No.: SA110315C19 5 Report Format Version 4.0.0 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT EUT 3G/4G Dual Mode Wireless Router MODEL NO. PCDH5072HS, EC5072 FCC ID QISEC5072 POWER SUPPLY 5.0Vdc (adapter) 3.7Vdc (battery) MODULATION TYPE CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION TECHNOLOGY DSSS, OFDM TRANSFER RATE 802.11b:11.0/ 5.5/ 2.0/ 1.0Mbps 802.11g: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0Mbps 802.11n: up to 65.0Mbps OPERATING FREQUENCY 2412 ~ 2462MHz NUMBER OF CHANNEL 11 MAXIMUM SAR (1g) 0.00341W/kg ANTENNA TYPE Monopole antenna with 0dBi DATA CABLE 1.12m USB cable without core I/O PORTS Refer to user’ manual ACCESSORY DEVICES Adapter, Battery NOTE: 1. The EUT is a 3G/4G Dual Mode Wireless Router. The test data are separated into following test reports. REFERENCE REPORT WLAN 802.11b/g, 802.11n SA11031…

Text truncated - open the document above for the full version.

Product Name: 3G/4G Dual Mode Wireless Router Model Number: EC5072/PCDH5072HS Report No: SYBH(Z-RF)014032011-2004 FCC ID: QISEC5072 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of EC5072/PCDH5072HS FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total29 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of EC5072/PCDH5072HS FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total29 REPORT ON FCC 47CFR part 15 subpart C Test of 3G/4G Dual Mode Wireless Router M/N: EC5072/PCDH5072HS Report No: BASEREPORTNO FCC ID: QISEC5072 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 15: Subpart C; CONCLUSION PASS Approved By 2011-03-16 Chen Xiaohong Date Name Signature Reviewed By 2011-03-16 Xu Guangyi Date Name Signature Operator 2011-03-16 Jingjinhua Date Name FCC Test Report of EC5072/PCDH5072HS FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total29 Contents 1 Summary .....................................................................................................................................................5 2 Product Description ...................................................................................................................................6 2.1 PRODUCTION INFORMATION ....................................................................................................................6 2.2 MODIFICATION INFORMATION ..................................................................................................................6 3 Test Site Description ..................................................................................................................................7 3.1 TESTING PERIOD ....................................................................................................................................7 3.2 GENERAL SET UP DESCRIPTION ..............................................................................................................7 4 Product Description ...................................................................................................................................8 4.1 TECHNICAL CHARACTERISTICS ................................................................................................................8 4.2 EUT IDENTIFICATION LIST .....................................................................................................................10 5 Main Test Instruments .............................................................................................................................11 6 Transmitter Measurements .....................................................................................................................13 6.1 6DB BANDWIDTH MEASUREMENT ...........................................................................................................13 6.2 PEAK OUTPUT POWER ..........................................................................................................................15 6.3 BAND EDGE SPURIOUS EMISSION ...........................................................................................................17 6.4 CONDUCTED RF SPURIOUS ...................................................................................................................19 6.5 POWER SPECTRAL DENSITY ..................................................................................................................21 6.6 RADIATED SPURIOUS EMISSION & SPURIOUS IN RESTRICTED BAND ..........................................................23 6.7 CONDUCTED EMISSION AT POWER PORT ...............................................................................................26 7 System Measurement Uncertainty ..........................................................................................................28 8 Appendices ...............................................................................................................................................29 FCC Test Report of EC5072/PCDH5072HS FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total29 1 Summary The table below summarizes the measurements and results for the EC5072. Detailed results and descriptions are shown in the following page…

Text truncated - open the document above for the full version.

FCC Test Report of EC5072 FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total10 Appendix A 6dB bandwidth measurement According to FCC Part 15.247 (a) (2) FCC Test Report of EC5072 FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total10 TM1 Channel 1 (2412MHz) FCC Test Report of EC5072 FCC ID: QISEC5072 Security Level: Public Report No: SYBH(Z-RF)014032011-2004 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total10 Channel 6…

Text truncated - open the document above for the full version.