QISETS3125I-IGSM 850/1900 Fixed Wireless Terminal

HUAWEI ETS3125i Fixed Wireless Terminal USER GUIDE Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. 2 Introduction  Note: The figures of the FWT (Fixed Wireless Terminal) are only for your reference, please refer color and shape to product. Front view 2 1 3 4 5 6 7 8 9 10 11 12 No. Item Description 1 Indoor antenna Receive signals 2 Display Screen Display information 3 Left soft key  Access the main menu in standby mode.  Select the option displayed on the lower left corner of the screen. 4 Scroll keys  Access the shortcut screen in standby mode.  Adjust the volume during a call. 5 Right soft key  Access the Phone Book screen in standby mode.  Select the option displayed on the lower right corner of the screen. 3 No. Item Description 6 OK key  Access the main Menu in standby mode.  Select the option displayed on the lower left corner of the display screen. 7 End key  End a call or reject an incoming call.  Power on or off the FWT (by pressing and holding it).  Return to the standby mode. 8 Hands-free key  Make or answer a call without lifting the handset.  Cancel the dialing, when dialing a number in the hands-free mode.  End the current call during a call in the hands-free mode. 9 Call/Redial key  Make or answer a call.  View the call history in standby mode. 10 # key  Lock the keypad in standby mode (by pressing and holding it).  Switch between different input methods in the edit mode. 11 * key Display a symbol list in the edit mode. 12 Number keys  Number keys from 0 to 9: Enter numbers and characters.  Number keys from 2 to 9: Press and hold a key to speed dial a phone number in standby mode. Screen Icons Icon Description Icon Description Network signal strength / Calling / No service Alarm clock is on Hands-free mode Message received Powered by power adapter Voice message received Battery power level 4 Menu Tree Contacts Message Call Log 1. Search 2. Add New 3. Speed Dial 4. Management 1. Create message 2. Inbox 3. Outbox 4. Drafts 5. Voice mail 6. Broadcast message 7. Settings 8. Delete all 1. All Calls 2. Missed Calls 3. Received Calls 4. Dialed Calls Tools FM Settings 1. Alarm 2. STK 1. Display 2. Phone settings 3. Sound settings 4. Call settings 5. Security settings 6. Restore Factory Settings Using the Function Menu 1. In standby mode, press to display the main menu. 2. Press / to scroll in the menu. 3. Press to display submenu. 4. Press / to scroll to a submenu item and press to access it. 5. Press to return to the previous menu or return to the home screen. 6. Press to return to the standby mode. Installation Installing the SIM Card Caution: The SIM card and its golden contact can be easily damaged by a scratch or bend. Be careful when installing or removing the SIM card. Power off the FWT and then disconnect it from the power socket. Install the SIM card according to the following figure. Make sure that the golden contact of the SIM card is facing downwards. 5 Installing the Battery Power off the FWT and remove the power supply cable, and install the battery as shown. Make sure that the battery cord plug matches the battery jack. Do not insert the battery reversely. Using the Power Adapter and Charging the Battery 1. Install the battery based on the battery installation steps. 2. Connect one end of the power adapter cable to the FWT and the other to the power socket. 3. The battery charging icon is displayed on the screen. The battery charging icon becomes static when the battery is fully charged.  Note:  Remove the battery if the FWT is left unused for a long period.  If the battery has not been used for a long time or the battery is exhausted, the screen of the FWT may not function when you charge the battery again. This is normal. After the battery is being charged f…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. We, HUAWEI TECHNOLOGIES CO., LTD., declare on our sole responsibility that the product (variant) FCC ID: QISETS3125I-I, model: ETS3125i This is to advise and officially, that we, HUAWEI TECHNOLOGIES CO., LTD., declare that ETS3125i I/O connects can only support charging. It can’t support USB with PC for data transfer. Sincerely, Wang Dongjie For and Behalf of: Huawei Technologies Co., Ltd. Fifth Street 9# Kuike Building, Shangdi-information Road, Haidian Beijing 0086-10-82836618

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2010-12-30 FCC ID:QISETS3125I-I To whom it may concern: We the undersigned, hereby authorize Louis Lin of Jiangsu TÜV Product Service Ltd. – Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Louis Lin of Jiangsu TÜV Product Service Ltd. – Shenzhen Branch on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: TUVPS Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISETS3125I-I to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei ETS3125i Fixed Wireless Terminal SECRET Page1, Total6 Photo documentation of external of product Huawei ETS3125i Fixed Wireless Terminal SECRET Page2, Total6 Huawei ETS3125i Fixed Wireless Terminal SECRET Page3, Total6 Huawei ETS3125i Fixed Wireless Terminal SECRET Page4, Total6 Huawei ETS3125i Fixed Wireless Terminal SECRET Page5, Total6 Huawei ETS3125i Fixed Wireless Terminal SECRET Page6, Total6

HuaweiETS3125i Fixed Wireless Terminal SECRET Page1, Total 1

Huawei ETS3125iFixed Wireless Terminal SECRET Page1, Total 1 ETS3125i Label Location

Huawei ETS3125i Fixed Wireless Terminal SECRET Page1, Total5 Photo documentation of interior of product Huawei ETS3125i Fixed Wireless Terminal SECRET Page2, Total5 Huawei ETS3125i Fixed Wireless Terminal SECRET Page3, Total5 Huawei ETS3125i Fixed Wireless Terminal SECRET Page4, Total5 Huawei ETS3125i Fixed Wireless Terminal SECRET Page5, Total5

HUAWEI ETS3125i Electromagnetic Radiation Exposure Estimation 1 Maximum Permissible Exposure (MPE) Estimation for ETS3125i 1 Introduction HUAWEI ETS3125i is Wireless Module equipments in the GSM/GRPS system, for ETS3125i, the frequency band is GSM850 and PCS1900. The Wireless Module implement such functions as RF signal receiving / Transmitting, GSM protocol processing, SMS service etc. 2 Limits and Guidelines on Exposure to Electromagnetic Fields According to the FCC Part 2.1091, we know: mobile device (transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters radiating structure(s) and the body of the user or nearby persons). And the Cellular radiotelephone service and PCS services are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if they operate at frequencies of 1.5 GHz or below and their effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. The radiated power of 850MHz for ETS3125i is 1W, so the ETS3125i are excluded from routine environmental evaluation for RF exposure according to the requirement of FCC Part 2.1091. The present document is given just only for reference. Uncontrolled limits are used for general public. General population/uncontrolled exposure apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. The exposure levels can be expressed in terms of power density, electric field strength, or magnetic field strength, as averaged over 30 minutes for the general public and 6 minutes for trained personnel. The exposure criterion is frequency dependent, and a chart covering the range from 3 kHz to 100 GHz can be found in NCRP No.86 (references IEEE C95.1-1999). Below are the limits. Limits for Occupational/Controlled Exposure HUAWEI ETS3125i Electromagnetic Radiation Exposure Estimation 2 Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-3.0 3.0-30 30-300 300-1500 15,00-100,000 614 1842/f 61.4 -- -- 16.3/f 16.3/f 0.163 -- -- (100)* (900/f2)* 1.0 f/300 5 Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-1.34 1.34-30 30-300 300-15,00 15,00-100,000 614 824/f 27.5 -- -- 1.63 2.19/f 0.073 -- -- (100)* (180/f2)* 0.2 f/1500 1.0 For mostly safe in the extreme condition, we take the lowest frequency to calculate, here, the lowest TX frequency of US cellular (824MHz) is taken. Power density S [mW/cm2] for controlled area at 824 MHz 75.2 300 248 300 )(  MHzf S mW/cm 2 Power density S [mW/cm2] for uncontrolled area at 824 MHz 55.0 1500 248 1500 )(  MHzf S mW/cm 2 S= 0.55 mW/cm 2 = 5.5 W/m 2 for uncontrolled exposure Power density S [mW/cm2] for uncontrolled area at 1900/2400 MHz S=1 mW/cm 2 Reference levels are provided for exposure assessment to determine whether the basic restrictions on exposure of humans to electromagnetic fields are exceeded. The basic restrictions on exposure to electromagnetic fields are based directly on established health effects and biological considerations. HUAWEI ETS3125i Electromagnetic Radiation Exposure Estimation 3 3 Location of EUT The EUT uses one monopole antenna. The source of the radiation is mounted on terminal; generally the direction of the antenna position is uprightness tabletop. The highest level of emission would be expected in close vicinity of the antenna and in line of sight to the antenna. 4 Prediction of the Exposure to Electromagnetic Fields Calculations can be made on a site by site basis to ensure the power density is below the limits given above, or guidelines can be done beforehand to ensure the minimum distances from the antenna is maintained through the site planning. The calculations are based on FCC OET 65 Appendix B. 4.1 Calculation of the Safe Distance Below method describes a theoretical approach to calculate possible exposure to electromagnetic radiation around a base station transceiver antenna. Precise statements are basically only possible either with measurements or complex calculations considering the complexity of the environment (e.g. soil conditions, near buildings and other obstacles) which causes reflections, scattering of electromagnetic fields. The maximum output power (given in EIRP) of a base station is usually limited by license conditions of the network operator. A rough estimation of the expected exposure in power flux density on a given point can be made with the following equation. The calculations are based on FCC OET 65 Appendix B.    )(4 )( 2 mr GWP S numeric Whereas: P = Maximum output power in W of the site G numeric = Numeric gain of the antenna relative to isotropic antenna R = distance between the antenna and the point of exposure in meters 4.2 Technical Description ETS3125i Technical Specification: HUAWEI ETS3125i Electromagnetic Radiation Exposure Estimation 4 Cellular Band ERP: 32.78dBm for GSM850MHz Transmitter frequency band GSM850 Frequency range: 850M： Uplink:824 M~849M； Downlink:869 M~894M PCS Band EIRP: 28.90 dBm for GSM1900MHz Transmitter frequency band GSM1900 Frequency range: 1900M： Uplink:1850 M~1910M； Downlink:1930M~1990M 4.3 Estimation of compliance boundary for indoor antenna 1) Cellular Band: GSM850 For the final determination of the compliance boundary the model for far-field calculation is used since this overestimates the field strength in the near-field region. Thus the calculated compliance boundary should be rather more conservative and on the safe side. For EUT the following compliance boundary is calculated:…

Text truncated - open the document above for the full version.

Report No: SYBH(Z-RF)009012011-2 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total30 FCC RF Test Report Product Name: Fixed Wireless Terminal Model Number: ETS3125i Report No: SYBH(Z-RF)009012011-2 FCC ID：QISETS3125I-I Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total30 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total30 Notice 2 Modification Information: Modification Information Modification Information 1 2 3 4 5 6 7 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-2 Confidential Information of Huawei. No Distribution without Written Permission Page7, Total30 REPORT ON RF TEST OF Fixed Wireless Terminal M/N: ETS3125i REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; START OF TEST Jan.10, 2011 END OF TEST Jan.13, 2011 Final Judgement: Pass Approved By 2011-1-15 Chen Xiaohong Date Name Signature Reviewed By 2011-1-14 Xu Guangyi Date Name Signature Operator 2011-1-13 Lu Xiaoguang Date Name Signature FCC Test Report of ETS3125i FCC ID: QISETS3125I Report No: SYBH(Z-RF)009012011-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total30 REPORT BODY CONTENT 1 SUMMARY ......................................................................................................................................... 6 2 PRODUCT DESCRIPTION .............................................................................................................. 7 2.1 Production Information ...................................................................................................................... 7 2.2 Modification Information .................................................................................................................... 7 3 TEST SITE DESCRIPTION .............................................................................................................. 8 3.1 Testing Period .................................................................................................................................... 8 3.2 General Set up Description ............................................................................................................... 8 4 PRODUCT DESCRIPTION .............................................................................................................. 9 4.1 Technical Characteristics .................................................................................................................. 9 4.2 EUT Identification List ...................................................................................................................... 11 5 MAIN TEST INSTRUMENTS .......................................................................................................... 12 6 TRANSMITTER MEASUREMENTS .............................................................................................. 13 6.1 Effective Radiated Power of Transmitter (ERP) ............................................................................. 13 6.2 Conducted Power of Transmitter .................................................................................................... 16 6.3 Modulation Characteristics .............................................................................................................. 18 6.4 Occupied Bandwidth ....................................................................................................................... 20 6.5 Band Edges Compliance ................................................................................................................ 22 6.6 Spurious Emission at Antenna Terminal ......................................................................................... 24 6.7 Frequency Stability .......................................................................................................................... 25 7 SYSTEM MEASUREMENT UNCERTAINTY................................................................................. 29 8 APPENDICES ................................................................................................................................. 30 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, To…

Text truncated - open the document above for the full version.

Report No: SYBH(Z-RF) 009012011-3 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total30 FCC RF Test Report Product Name: Fixed Wireless Terminal Model Number: ETS3125i Report No: SYBH(Z-RF)009012011-3 FCC ID：QISETS3125I-I Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-3 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total30 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-3 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total30 Notice 2 Modification Information: Modification Information Modification Information 1 2 3 4 5 6 7 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-3 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total30 REPORT ON RF TEST OF Fixed Wireless Terminal M/N: ETS3125i REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; START OF TEST Jan.10, 2011 END OF TEST Jan.13, 2011 Final Judgement: Pass Approved By 2011-01-15 Chenxiaohong Date Name Signature Reviewed By 2011-01-14 xuguangyi Date Name Signature Operator 2011-01-13 Luxiaoguang Date Name Signature FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-3 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total30 REPORT BODY CONTENT 1 SUMMARY ...................................................................................................................................... 6 2 PRODUCT DESCRIPTION .......................................................................................................... 7 2.1 Production Information .................................................................................................................... 7 2.2 Modification Information .................................................................................................................. 7 3 TEST SITE DESCRIPTION ............................................................................................................ 8 3.1 Testing Period ................................................................................................................................. 8 3.2 General Set up Description ............................................................................................................. 8 4 PRODUCT DESCRIPTION ............................................................................................................ 9 4.1 Technical Characteristics ................................................................................................................ 9 4.2 EUT Identification List ................................................................................................................... 11 5 MAIN TEST INSTRUMENTS ....................................................................................................... 12 6 TRANSMITTER MEASUREMENTS ............................................................................................ 13 6.1 Effective Radiated Power of Transmitter (EIRP) ......................................................................... 13 6.2 Conducted Power of Transmitter .................................................................................................. 16 6.3 Modulation Characteristics ............................................................................................................ 18 6.4 Occupied Bandwidth ..................................................................................................................... 20 6.5 Band Edges Compliance .............................................................................................................. 22 6.6 Spurious Emission at Antenna Terminal ...................................................................................... 24 6.7 Frequency Stability ........................................................................................................................ 26 7 SYSTEM MEASUREMENT UNCERTAINTY .............................................................................. 29 8 APPENDICES ............................................................................................................................... 30 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-RF)009012011-3 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total30 1 SUMMARY The table below summarizes the …

Text truncated - open the document above for the full version.

Report No: SYBH(Z-EMC)055122010-2 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total23 EMC Test Report Product Name: Fixed Wireless Terminal Model Number: ETS3125i Report No: SYBH(Z-EMC)055122010-2 FCC ID: QISETS3125I-I Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-EMC)055122010-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total23 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The test report is invalid if not marked with "exclusive stamp for the test report". 4. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 5. The test report is invalid if there is any evidence of erasure and/or falsification. 6. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 7. Normally, the test report is only responsible for the samples that have undergone the test. 8. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-EMC)055122010-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total23 Notice 2 Modification Information: Table 1 Modification Information Modification Information 1 2 3 4 5 6 7 FCC Test Report of ETS3125i FCC ID: QISETS3125I-I Report No: SYBH(Z-EMC)055122010-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total23 REPORT ON EMC TEST OF Fixed Wireless Terminal M/N: ETS3125i REGULATION FCC CFR47 Part 15: Subpart B; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 24: Subpart E; START OF TEST Dec.10, 2010 END OF TEST Dec.31, 2010 Final Judgement: Pass Approved By 2011-01-04 Liuchunlin Date Name Signature Reviewed By 2011-01-04 Dailinjun Date Name Signa…

Text truncated - open the document above for the full version.