QISF256-BVWFixed Wireless Terminal

SAFETY AND WARRANTY This manual addresses the safety guidelines and precautions to follow when operating your device. Before operating your device, please be aware of all the safety details. This manual contains the warranty for your device. Please review this manual thoroughly. 2 SAFETY INFORMATION FOR WIRELESS DEVICE .............3 FDA CONSUMER UPDATE .....................................................8 AVOID POTENTIAL HEARING LOSS ...................................15 FCC COMPLIANCE INFORMATION ..................................17 Emergency Calling .................................................................18 12 MONTH LIMITED WARRANTY ......................................21 Table of Contents 3 SAFETY INFORMATION FOR WIRELESS DEVICE Read this information before using your wireless device. ELECTRONIC DEVICE Power off your device if using the device is prohibited. Do not use the device when usage causes danger or interference with electronic devices. MEDICAL DEVICE • Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited. • Pacemaker manufacturers recommend that a minimum distance of 5.9 inches be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If you are using a pacemaker, use the device on the opposite side of the pacemaker. • Some wireless devices may affect the performance of hearing aids. For any such problems, consult your service provider. POTENTIALLY EXPLOSIVE ATMOSPHERE Power off your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not power on your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied 4 petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. OPERATING ENVIRONMENT • Do not use or charge the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in a malfunction of the circuit. • On a stormy day with thunder, do not use your device, to prevent any danger caused by lightning. • When you are on a call, do not touch the antenna. Touching the antenna affects the call quality and results in increase in power consumption. As a result, the talk time and the standby time are reduced. • Do not place any cable or metal near the antenna, because they may interfere with the signal. • Do not install outdoor antenna, because it may damage your device. • Use accessories authorized by the manufacturer. Using unauthorized accessories will render the warranty null and void. • Because the device needs to disperse heat during operation, place the device and the power supply in a cool, ventilated area. Never cover the device, put objects on it, or place it near water, fire as well as inflammable and explosive materials. • This device should be installed and operated with a minimum distance of 7.9 inches between the antenna and all persons. • Keep the ambient temperature between 14°F and 113°F while the device is being charged. Keep the ambient temperature between 14°F and 122°F for using the device powered by a battery. SAFETY OF CHILDREN Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure 5 that small children are kept away from the device and accessories. ACCESSORIES Only use parts or accessories made by the Manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the device, and cause danger.interference with airborne electronic equipment. Battery safety • Do not connect battery poles with conductors, such as keys, jewelry, or other metal materials. Doing so may short-circuit the battery and cause injuries or burns. • Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated. • Do not attempt to modify or remanufacture the battery, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards. • If the battery leaks, ensure that the electrolyte does not make direct contact with your skins or eyes. If the electrolyte touches your skins or splashes into your eyes, immediately flush with clean water and consult a doctor. • In case of battery deformation, color change, or overheating while charging or storing, immediately stop using the device and remove the battery. Continued use may lead to battery leakage, fire, or explosion. • Do not put batteries in fire as they may explode. Damaged batteries may also explode. • Dispose of used batteries in accordance with local regulations. Improper battery use may lead to fire, explosion, or other hazards. • Do not allow children or pets to bite or suck the battery. Doing so may result in damage or explosion. 6 • D…

Text truncated - open the document above for the full version.

User Guide VERIZON WIRELESS HOME PHONE CONNECT label Welcome to Verizon Wireless Thank you for choosing Verizon Wireless Home Phone Connect. You’re now connected to America’s most reliable wireless network. This guide will help you understand your new wireless device and all of its capabilities. So let’s get started. Contents 1 Introduction ................................................................................................................................................................................... 1 Package Contents ........................................................................................................................................................... 1 Top View ............................................................................................................................................................................. 2 Bottom View...................................................................................................................................................................... 3 2 Installation and Activation ........................................................................................................................................................ 4 Step 1: Installing the Battery ....................................................................................................................................... 4 Step 2: Installing the Antenna..................................................................................................................................... 5 Step 3: Installing the Power Adapter ........................................................................................................................ 5 Step 4: Connecting your Telephone to Home Phone Connect........................................................................6 Step 5: Powering on the Device ................................................................................................................................. 8 Step 6: Activating the Device ...................................................................................................................................... 8 Step 7: Understanding the Indicators ...................................................................................................................... 9 Step 8: Making Calls .....................................................................................................................................................10 Step 9: Receiving Calls .................................................................................................................................................10 3 General Functions ......................................................................................................................................................................12 Mounting the Device ...................................................................................................................................................12 Making a 3-Way Call .....................................................................................................................................................13 Using Voice Mail.............................................................................................................................................................14 Using Call Forwarding .................................................................................................................................................14 Important Facts About Your Home Phone Connect..........................................................................................15 Assistive Communication Devices...........................................................................................................................16 4 Frequently Asked Questions...................................................................................................................................................17 1 1 0B0BIntroduction Package Contents The package should contain the following items. Please contact Verizon Wireless if any of the items are missing or damaged. Verizon Wireless Home Phone Connect Antenna Battery Desktop stand User Guide Quick Reference Guide Product Safety and Warranty Information Power Adapter User Guide Quick Reference Guide Product Safety and Warranty Information  Note:  Customer must provide their own home telephone. Home telephone can be either traditional corded phone or cordless phone. Home telephone must be single line touch tone. Home phone Connect is not compatible with multi line equipment, rotary dial or pulse dial. 2 To p Vi e w  Note:  The figures are only for your reference, the actual shape and color of the product may differ slightly. 1 8 7 6 9 2 3 4 5 10 * Note: Never place a USB-based device into the USB port of the Home Phone Connect under any circumstances. Doing so may damage the device and negate its warranty. The port was designed for diagnostic purposes only; it is not intended for customer use. 1 DC 12V power port 6 Power indicator 2 Telephone port 1 7 Voice mail indicator 3 Telephone port 2 8 Battery indicator 4 USB port* 9 Signal strength indicators 5 Antenna port 10 Power on/off switch 3 4 4B4BBottom View 123 1 Wall-mounting brackets 3 Battery port 2 Battery cover 4 Desktop stand 4 2 Installation and Activation 5B5BStep 1: Installing the Battery Remove the battery cover. Carefully insert the battery connection cable into the battery port. The connection cable will click into place when correctly inserted. Place the battery in the battery slot and return the battery cover.  Note:  The device takes approximately 3.5 hours to charge fully. The charge time may be impacted by environmental factors.  Talk time is approximately 2 hours and standby time is approximately 36 hours. Actual values will vary with the network environment.  The battery is intended for b…

Text truncated - open the document above for the full version.

Date (03/06/2014) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou, Checkpoint Road 2, Nanshan District Shenzhen 518052 P. R. China Felix.Li Phone: +86-755-88286998-3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: FCC ID: QISF256-BVW This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2014-03-11 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISF256-BVW To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2014-6-10 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755- 28970299

Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page1 Total7 Photo documentation of external of product Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page2 Total7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page3 Total7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page4 Total7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page5 Total7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page6 Total7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page7 Total7

Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page1, Total 1 F256-B/F256-BVW ID Label: Label size: 12.5mm(width) x 79.2mm(length)

Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page1, Total 1 F256-B/F256-BVW Label location:

Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page1,Total 7 Photo documentation of interior of product Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page2,Total 7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page3,Total 7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page4,Total 7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page5,Total 7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page6,Total 7 Huawei F256-B/F256-BVW Fixed Wireless Terminal SECRET Page7,Total 7

EMC Test Report Product Name: Fixed Wireless Gateway Model Number: F256-B,F256-BVW Report No: SYBH(Z-EMC)073022014-2 FCC ID: QISF256-BVW Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 Test Report of HUAWEI F256-B,F256-BVW FCC ID: QISF256-BVW Security Level: secret Report No: SYBH(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total17 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 9. Normally, the test report is only responsible for the samples that have undergone the test. 10. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Test Report of HUAWEI F256-B,F256-BVW FCC ID: QISF256-BVW Security Level: secret Report No: SYBH(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total17 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Test Item: Feb.24, 2014 Start Date of Test: Feb.24, 2014 End Date of Test: Feb.27, 2014 Test Result: Pass Approved By 2014-02-27 Liu Chunlin (Lab Manager) Date Name Signature Operator 2014-02-27 Yue Meng (Test Engineer) Date Name Signature Test Report of HUAWEI F256-B,F256-BVW FCC ID: QISF256-BVW Security Level: secret Report No: SYBH(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total17 Modification Record No. Last Report No. Modification Description 1 NA First report Test Report of HUAWEI F256-B,F256-BVW FCC ID: QISF256-BVW Security Level: secret Report No: SYBH(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total17 TABLE OF CONTENT 1 General Information ............................................................................................................................. 6 1.1 EUT Description ........................................................................................................................... 6 1.2 Test Site Information .................................................................................................................... 7 1.3 Applied Standards ........................................................................................................................ 7 2 Summary of Results ............................................................................................................................. 8 3 System Configuration during EMC Test .............................................................................................. 9 3.1 Test Mode ..................................................................................................................................... 9 3.2 Test System Configuration ........................................................................................................... 9 3.3 Cables Used during Test ............................................................................................................ 10 3.4 Associated Equipment Used during Test .................................................................................. 10 4 Electromagnetic Interference (EMI) ................................................................................................... 11 4.1 Radiated Disturbance 30MHz to 18GHz ................................................................................... 11 4.2 Conducted Disturbance 0.15 MHz to 30MHz ............................................................................ 13 5 Main Test Instruments ........................................................................................................................ 14 6 System Measurement Uncertainty .................................................................................................... 14 7 Test Data and Graph .......................................................................................................................... 15 7.1 Radiated Disturbance ................................................................................................................. 15 7.2 Conducted Disturbance .............................................................................................................. 17 Test Report of HUAWEI F256-B,F256-BVW FCC ID: QISF256-BVW Security Level: secret Report No: SYBH(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total17 1 General Information 1.1 EUT Description EUT Description Product Name Fixed Wireless Gateway Model Number F256-B,F256-BVW Seria…

Text truncated - open the document above for the full version.

FCC Test Report of F256-B,F256-BVW FCC ID: QISF256-B Security Level:secret Report No: SYBH-(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Permission Page1, Total5 Photos of EUT FCC Test Report of F256-B,F256-BVW FCC ID: QISF256-B Security Level:secret Report No: SYBH-(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total5 Figure1 EUT Appearance FCC Test Report of F256-B,F256-BVW FCC ID: QISF256-B Security Level:secret Report No: SYBH-(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total5 Photos of Test Setup FCC Test Report of F256-B,F256-BVW FCC ID: QISF256-B Security Level:secret Report No: SYBH-(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Permission Page4, Total5 1 Radiated Emissions Radiated Disturbance （30MHz-1GHz） Radiated Disturbance （above 1GHz） FCC Test Report of F256-B,F256-BVW FCC ID: QISF256-B Security Level:secret Report No: SYBH-(Z-EMC)073022014-2 Confidential Information of Huawei. No Distribution without Permission Page5, Total5 2 Conducted Emissions Conducted Emissions for AC Ports Conducted Emissions for AC Ports