QISF261CDMA2000 1x Cellular Phone

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. 2 Appearance  Note: The figures in this guide are provided for your reference only. Front View No. Press... To... 1 Navigation keys  Access the main menu by pressing the OK key in standby mode.  Access a shortcut menu by pressing the corresponding navigation key in standby mode.  Adjust the volume by pressing the navigation keys during a call. 2 Right function key Select the option displayed in the lower right corner of the screen. 3 No. Press... To... 3 End key  End or cancel a call.  Power the phone on or off by pressing and holding the key.  Turn the backlight on or off in standby mode.  Return to the standby mode. 4 Number and symbol keys  Enter numbers, letters, and symbols.  Number keys (2–9): Speed-dial a phone number by pressing and holding a key in standby mode.  # key: Switch between text input methods in editing mode.  * key: Display the symbol list in editing mode. 5 Call/Send key  Make or answer a call.  View the call log in standby mode. 6 Left function key Select the option displayed in the lower left corner of the screen. Screen Icons Icon Description Icon Description Signal strength Battery level Alarm clock Call in progress CDMA2000 1x network Roaming 4 Installation (Optional) Installing a UIM Card Ensure that the phone is powered off and disconnected from the power adapter. When installing a User Identity Module (UIM) card, ensure that the golden contacts of the UIM card are facing downward and that the beveled edge of the UIM card is properly aligned with that of the UIM card slot. Then check that the UIM card is completely inserted.  Note: Do not frequently remove the UIM card when using the phone. Installing the Battery Ensure that the phone is powered off and disconnected from the power adapter. When installing the battery, ensure that the golden contacts of the battery are in good contact with those in the battery slot.  Note: If the phone will not be used for a long time, remove the battery from the phone. 5 Charging the Battery  Method 1:  Method 2:  Note:  When the phone is delivered, the batter power is lower. Therefore, charge the phone for a while and then power on the phone the first time you use it.  When you plug your phone into or out of the charging dock, hold the charging dock with one hand and the phone with the other. Ensure that moderate strength is exerted. Powering On the Phone To power on the phone, press and hold the end key until the screen lights up.  Note: Press and hold the end key to power off the phone. Call Functions Making a Call 1. In standby mode, press the number keys to enter a phone number. 2. Press the call key to dial the number. 3. Press the end key to end the call or cancel the dialing. 6  Note:  In standby mode, press the call key to view the call log. Find the desired number in the call log, and then press the call key dial the number.  Find the desired number in the phonebook, and then press the call key to dial the number. Answering or Rejecting a Call When there is an incoming call, press the call key to answer the call; press the end key to reject the call. Messages Creating a Message 1. Select Messages > Create Message. 2. Edit the message. 3. Press the OK key and then add a recipient using the following methods:  Enter the recipient's phone number.  Add the recipient from the phonebook. 4. Press the OK key to send the message. Reading a Message The phone stores received messages in the inbox. 1. Select Messages > Inbox. 2. Press the Up or Down navigation key to scroll to a message in the list. 3. Press the OK key to open and read the message. 4. Press the left function key to manage the message. Text Input Methods Switching Between Input Methods In editing mode, pr…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: Jiangsu TÜV Product Service Ltd。-Shenzhen Branch Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2011-05-04 FCC ID:QISF261 To whom it may concern: We the undersigned, hereby authorize Jiangsu TÜV Product Service Ltd.—Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jiangsu TÜV Product Service Ltd. —Shenzhen Branch on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: Jiangsu TÜV Product Service Ltd。-Shenzhen Branch Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISF261 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI F261 Handset Phone SECRET Page1, Total9 Photo documentation of external of product HUAWEI F261 Handset Phone SECRET Page2, Total9 HUAWEI F261 Handset Phone SECRET Page3, Total9 HUAWEI F261 Handset Phone SECRET Page4, Total9 HUAWEI F261 Handset Phone SECRET Page5, Total9 HUAWEI F261 Handset Phone SECRET Page6, Total9 HUAWEI F261 Handset Phone SECRET Page7, Total9 HUAWEI F261 Handset Phone SECRET Page8, Total9 HUAWEI F261 Handset Phone SECRET Page9, Total9

Huawei F261 Handset Phone SECRET Page1, Total 1 F261 ID Label

Huawei F261 Handset Phone SECRET Page1, Total 1 F261

HUAWEI F261 Handset Phone SECRET Page1, Total6 Photo documentation of interior of product HUAWEI F261 Handset Phone SECRET Page2, Total6 HUAWEI F261 Handset Phone SECRET Page3, Total6 HUAWEI F261 Handset Phone SECRET Page4, Total6 HUAWEI F261 Handset Phone SECRET Page5, Total6 HUAWEI F261 Handset Phone SECRET Page6, Total6

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785513 SAR-Laboratory Fax: +86-755-36834474 . As of 2011-05-04 Page 1 of 60 Accredited testing laboratory CNAS Registration number: L0310 Report On SAR Test of HUAWEI CDMA Handset Phone M/N: F261 Test report no. : SYBH (Z-SAR)008042011-2 Type identification : F261 FCC ID : QISF261 Test specification : IEEE 1528-2003 : ANSI C95.1-1999 : RSS-102 issue 4 (2010) : OET Bulletin 65 Supplement C Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 2 of 60 Table of Contents 1 General Information ............................................................................................................................................................ 3 1.1 Notes ............................................................................................................................................................................ 3 1.1.1 Statement of Compliance ................................................................................................................................. 3 1.2 Testing laboratory....................................................................................................................................................... 4 1.3 Applicant and Manufacturer ...................................................................................................................................... 4 1.4 Application details ...................................................................................................................................................... 4 1.5 Test item ...................................................................................................................................................................... 5 1.5.1 EUT Description ................................................................................................................................................. 5 1.6 Test specification(s) ................................................................................................................................................... 6 1.6.1 RF exposure limits ............................................................................................................................................. 6 1.7 Operating conditions during test .............................................................................................................................. 7 1.7.1 General description of test procedures ........................................................................................................... 7 1.7.2 Information for the Measurement of CDMA 1x Devices ............................................................................... 7 2 Technical test ....................................................................................................................................................................... 8 2.1 Summary of test results............................................................................................................................................. 8 2.2 Test environment........................................................................................................................................................ 8 2.3 Measurement and test set-up ................................................................................................................................... 8 2.4 Measurement system ................................................................................................................................................ 9 2.4.1 System Description ............................................................................................................................................ 9 2.4.2 Test environment ............................................................................................................................................. 10 2.4.3 Probe description ............................................................................................................................................. 10 2.4.4 Phantom description ........................................................................................................................................ 11 2.4.5 Device holder description ............................................................................................................................... 11 2.4.6 Scanning procedure ........................................................................................................................................ 12 2.4.7 Spatial Peak SAR Evaluation ......................................................................................................................... 13 2.4.8 Data Storage and Evaluation ......................................................................................................................... 14 2.4.9 Test equipment utilized ................................................................................................................................... 16 2.4.10 Tissue simulating liquids: dielectric properties ............................................................................................ 17 2.4.11 Tissue simulating liquids: parameters ........................................................................................................... 17 2.4.12 Measurement uncertainty evaluation for SAR test...................................................................................... 18 2.4.13 Measurement uncertainty evaluation for system validation ....................................................................... 19 2.4.14 System check ................................................................................................................................................... 20 2.4.15 Validation procedure......................................…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 41 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 42 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 43 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 44 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 45 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 46 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 47 of 60 Annex 3.2 Calibration report “Data Acquisition Unit (DAE)” Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 48 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 49 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 50 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 51 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 52 of 60 Annex 3.3 Calibration report “835 MHz System validation dipole” Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 53 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 54 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 55 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 56 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 57 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 58 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 59 of 60 Huawei Technologies Co.,Ltd. Test report no.:SYBH(Z-SAR)008042011-2 As of 2011-05-04 Page 60 of 60

Report No: SYBH(Z-EMC)075052011-2 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total22 EMC Test Report Product Name: Handset Phone Model Number: F261 Report No: SYBH(Z-EMC)075052011-2 FCC ID:QISF261 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of Handset Phone FCC ID: QISF261 Report No: SYBH(Z-EMC)075052011-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total22 Notice 1 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of Handset Phone FCC ID: QISF261 Report No: SYBH(Z-EMC)075052011-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total22 Notice 2 Modification Information: Modification Information Modification Information 1 2 3 4 5 6 7 FCC Test Report of Handset Phone FCC ID: QISF261 Report No: SYBH(Z-EMC)075052011-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total22 REPORT ON Handset Phone F261 REGULATION FCC CFR47 Part 15: Subpart B; FCC CFR47 Part 22: Subpart H; START OF TEST May.9,2011 END OF TEST May.10,2011 Final Judgement: Pass Approved By 2011-05-10 Liuchunlin Date Name Signature Reviewed By 2011-05-10 Dailinjun Date Name Signature Operator 2011-05-10 Heyong Date Name Signature FCC Test Report of Handset Phone FCC ID: QISF261 Report No: SYBH(Z-EMC)075052011-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total22 REPORT BODY CONTENT 1 Status ............................................................................................................................................... 6 1.1 Product Information ......................................................................................................................... 6 1.2 Test Site ........................................................................................................................................... 6 1.3 Test environment condition ............................................................................................................. 6 2 Summary of Results ........................................................................................................................ 7 3 Equipment Specification ................................................................................................................. 8 3.1 General Description......................................................................................................................... 8 4 System Configuration during EMC Test ....................................................................................... 10 4.1 Cables Used during Test .............................................................................................................. 10 4.2 Associated Equipment Used during Test ..................................................................................... 10 4.3 Test Configurations and Test Mode ............................................................................................. 10 4.4 Test conditions and test Connections .......................................................................................... 10 5 Electromagnetic Interference (EMI) .............................................................................................. 12 5.1 Radiated Disturbance .................................................................................................................... 12 5.2 Conducted Disturbance 0.15 MHz to 30MHz............................................................................... 13 5.3 Radiated Spurious Emissions ....................................................................................................... 15 6 Main Test Instruments ................................................................................................................... 17 7 System Measurement Uncertainty ............................................................................................... 18 8 Graph and Data of Emission Test ................................................................................................ 19 8.1 Radiated Disturbance .................................................................................................................... 19 8.2 Conducted Disturbance ................................................................................................................ 20 8.3 Radiated Spurious Emission ........................................................................................................ 21 FCC Test Report of Handset Phone FCC ID: QISF261 Report No: SYBH(Z-EMC)075052011-2 Confidential In…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: Handset Phone Model Number: F261 Report No: SYBH(Z-RF)013052011-2001 FCC ID: QISF261 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC RF Test Report of F261 FCC ID: QISF261 Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total31 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC RF Test Report of F261 FCC ID: QISF261 Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total31 Notice 2 Modification Information: Modification Information Modification Information 1 2 3 4 5 6 7 FCC RF Test Report of F261 FCC ID: QISF261 Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total31 REPORT ON Handset Phone REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22 : Subpart H; START OF TEST Apr.27, 2011 END OF TEST Apr.28, 2011 Final Judgement: Pass Approved By Apr.29, 2011 Chen Xiaohong Date Name Signature Reviewed By Apr.29, 2011 Xu Guangyi Date Name Signature Operator By Apr.29, 2011 Huang Qiuliang Date Name Signature FCC RF Test Report of F261 FCC ID: QISF261 Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total31 REPORT BODY CONTENT 1 Summary .....................................................................................................................................................6 2 Product Description ...................................................................................................................................7 2.1 PRODUCTION INFORMATION ....................................................................................................................7 2.2 MODIFICATION INFORMATION ..................................................................................................................7 3 Test Site Description ..................................................................................................................................8 3.1 TESTING PERIOD ....................................................................................................................................8 3.2 GENERAL SET UP DESCRIPTION ..............................................................................................................8 4 Product Description ...................................................................................................................................9 4.1 TECHNICAL CHARACTERISTICS ................................................................................................................9 4.2 EUT IDENTIFICATION LIST .....................................................................................................................10 5 Main Test Instruments .............................................................................................................................12 6 Transmitter Measurements .....................................................................................................................14 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP) .........................................................................14 6.2 CONDUCTED POWER OF TRANSMITTER .................................................................................................17 6.3 MODULATION CHARACTERISTICS ...........................................................................................................19 6.4 OCCUPIED BANDWIDTH .........................................................................................................................21 6.5 BAND EDGES COMPLIANCE ...................................................................................................................23 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL .........................................................................................25 6.7 FREQUENCY STABILITY .........................................................................................................................27 7 System Measurement Uncertainty ..........................................................................................................30 8 Appendices ...............................................................................................................................................31 FCC RF Test Report of F261 FCC ID: QISF261 Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total31 1 Summary The table below summarizes the measurements …

Text truncated - open the document above for the full version.

FCC Test Report of F261 FCC ID：QISF261 Security Level: Public Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Permission Page1, Total3 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC Test Report of M580 FCC ID：QISC5870 Security Level: Public Report No: SYBH(Z-RF)013032011-2001 Confidential Information of Huawei. No Distribution without Permission Page2, Total3 Channel 283(TM1) FCC Test Report of M580 FCC ID：QISC5870 Security Level: Public Report No: SYBH(Z-RF)013032011-2001 Confidential Information of Huawei. No Distribution without Permission Page3, Total3 Channel 283(TM3)

FCC Test Report of F261 FCC ID：QISF261 Security Level: Public Report No: SYBH(Z-RF)013052011-2001 Confidential Information of Huawei. No Distribution without Permission Page1, Total7 Appendix B Occupied Bandwidth According to FCC Part 2.1049 & Part 22 Sub…

Text truncated - open the document above for the full version.