QISF360GSM 850/1900 Phone

F360 Handset Phone USER GUIDE Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. 1 Your Handset Phone 1 2 3 4 5 6 7 8 9 10 11 12  Note: The figures of the handset phone in this document are provided for your reference only. The product appearance may vary according to products. NO. Item NO. Item 1 Earpiece 7 Charger interface 2 Screen 8 * key 3 Right soft key 9 Number keys 4 End key 10 Call/Redial key 5 # key 11 Left Soft key 6 Microphone 12 Scroll keys 2 Keys and Functions Press... To... Right soft key  Access the Contacts screen in standby mode.  Select the option displayed on the lower right. End key  Power on or off the handset phone by pressing and holding it in the standby mode.  End a call or reject an incoming call.  Return to the standby mode. # key Switch between different input modes in editing mode. * key Access the symbol screen in editing mode. Number keys  Enter digits or characters (by pressing the 0–9 keys).  Call the voicemail in standby mode (by pressing and holding the 1 key).  Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys). Call/Redial key  Make or answer a call.  View the call history in standby mode. Left soft key  Access the main menu in standby mode.  Select the option displayed in the lower left corner of the screen. 3 Press... To... Scroll keys  Access the shortcut screen in standby mode.  Access the main menu by press the OK key in standby mode.  During a call, press left key or right key to adjust the volume of the earpiece. Screen Icons Icon Indicates Icon Indicates Network signal strength Battery power level Calling Alarm clock is on  Message received  Memory for messages is full, when the icon is blinking Keypad is locked Remind by sound 4 Menu Tree SMS Contacts Call history 1. Write message 2. Inbox 3. Outbox 4. Drafts 5. Voicemail 6. Cell broadcast 7. Settings 1. Contacts 2. Create 3. Speed-dial 4. Management 1. All Calls 2. Missed Calls 3. Received Calls 4. Dialed Calls Tools Settings 1. Alarm 1. Display settings 2. Phone settings 3. Audio settings 4. Call settings 5. Security settings 6. Restore factory settings 5 Installing the SIM Card and Battery Make sure that the golden area on the SIM card is facing downwards and that the beveled edge of the SIM card is properly aligned with that of the card slot. Charging the Battery Charging the battery in either of the following ways:  Method 1:  Method 2:  Note:  If the phone is not going to be used for a long time, remove the battery from the phone.  If the battery has not been used for a long time, or if the battery power has been used up, the phone will not display anything on the screen. The phone can be powered on and used only after the battery is charged for some time. Using the Function Menu 1. In the standby mode, press to display the Menu screen. 6 2. Press scroll keys to scroll in the menu. 3. Press to display the menu. 4. Press the Up or Down key to scroll to a submenu item and press to select the submenu. 5. Press to return to the previous menu or return to the home screen. 6. Press to return to the home screen. Making a Call 1. In the standby mode, enter a phone number. 2. Press to dial the number. 3. Press to end the call. 7  Note:  In the standby mode, press to view the call history. Select a record and press to dial this number.  Select a contact from the handset phonebook and press to call this contact.  When the handset phone is locked, enter the lock code to unlock the handset phone first; otherwise, you can only make emergency calls or answer calls.  During a call, press key to switch the hands free. Answering a Call When there is an incoming call, you can press or to answer it. Press to reject it. handset phone Lock The default handset phone lock c…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISF360 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2010-9-26 To whom it may concern: FCC ID:QISF360 We the undersigned, hereby authorize Louis lin of Jiangsu TÜV Product Service Ltd. – Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Louis lin of Jiangsu TÜV Product Service Ltd. – Shenzhen Branch on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei F360 Handset Phone SECRET Page1, Total7 Photo documentation of external of product Huawei F360 Handset Phone SECRET Page2, Total7 Huawei F360 Handset Phone SECRET Page3, Total7 Huawei F360 Handset Phone SECRET Page4, Total7 Huawei F360 Handset Phone SECRET Page5, Total7 Huawei F360 Handset Phone SECRET Page6, Total7 Huawei F360 Handset Phone SECRET Page7, Total7

Huawei F360 Handset Phone SECRET Page1, Total 1 F360 Label：

Huawei F360Handset Phone SECRET Page1, Total 1 F360 Label Location

Huawei 360 Handset PHONE SECRET Page1, Total8 Photo documentation of interior of product Huawei 360 Handset PHONE SECRET Page2, Total8 Huawei 360 Handset PHONE SECRET Page3, Total8 Huawei 360 Handset PHONE SECRET Page4, Total8 Huawei 360 Handset PHONE SECRET Page5, Total8 Huawei 360 Handset PHONE SECRET Page6, Total8 Huawei 360 Handset PHONE SECRET Page7, Total8 Huawei 360 Handset PHONE SECRET Page8, Total8

Report No.: RZA2010-1486FCC TESTING No. L2264 OET 65 TEST REPORT Product Name Handset Phone Model F360 FCC ID QISF360 Client Huawei Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name Handset Phone Model F360 FCC ID QISF360 Report No. RZA2010-1486FCC Client Huawei Technologies Co., Ltd. Manufacturer Huawei Technologies Co., Ltd. Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radiofrequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE Std 1528™-2003: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions. Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: October 9 th , 2010 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Xue Chaofeng TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1486FCC Page 3 of 97 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the Test Report.......................................................................................................5 1.2. Testing Laboratory ................................................................................................................ 5 1.3. Applicant Information ............................................................................................................ 6 1.4. Manufacturer Information ...................................................................................................... 6 1.5. Information of EUT................................................................................................................ 7 1.6. The Maximum SAR 1g Values and Conducted Power of each tested band ........................... 8 1.7. Test Date .............................................................................................................................. 8 2. Operational Conditions during Test ..............................................................................................9 2.1. General Description of Test Procedures ............................................................................... 9 2.2. GSM Test Configuration ........................................................................................................ 9 2.3. Test Positions........................................................................................................................ 9 2.3.1. Against Phantom Head .................................................................................................. 9 2.3.2. Body Worn Configuration............................................................................................... 9 3. SAR Measurements System Configuration ................................................................................ 10 3.1. SAR Measurement Set-up .................................................................................................. 10 3.2. DASY5 E-field Probe System ............................................................................................. 11 3.2.1. EX3DV4 Probe Specification ....................................................................................... 11 3.2.2. E-field Probe Calibration .............................................................................................. 12 3.3. Other Test Equipment .........................................................................................................12 3.3.1. Device Holder for Transmitters .................................................................................... 12 3.3.2. Phantom...................................................................................................................... 13 3.4. Scanning Procedure........................................................................................................... 13 3.5. Data Storage and Evaluation .............................................................................................. 15 3.5.1. Data Storage................................................................................................................ 15 3.5.2. Data Evaluation by SEMCAD ...................................................................................... 15 3.6. System Check..................................................................................................................... 18 3.7. Equivalent Tissues ..............................................................................................................19 4. Laboratory Environment............................................................................................................. 20 5. Characteristics of the Test .......................................................................................................... 20 5.1. Applicable Limit Regulations ............................................................................................... 20 5.2. Applicable Measurement Standards................................................................................... 20 6. Conducted Output Power Measurement.................................................................................... 21 6.1. Summary ................…

Text truncated - open the document above for the full version.

Report No: SYBHZ(R)E046092010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total23 EMC Test Report Product Name: Handset Phone Model Number: F360 Report No: SYBHZ(R)E046092010EB-1 FCC ID: QISF360 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total23 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The test report is invalid if not marked with "exclusive stamp for the test report". 4. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 5. The test report is invalid if there is any evidence of erasure and/or falsification. 6. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 7. Normally, the test report is only responsible for the samples that have undergone the test. 8. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total23 Notice 2 Modification Information: Table 1 Modification Information Modification Information 1 2 3 4 5 6 7 FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total23 REPORT ON EMC TEST OF Handset Phone M/N: F360 REGULATION FCC CFR47 Part 15: Subpart B; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 24: Subpart E; START OF TEST Sep.15, 2010 END OF TEST Sep.20, 2010 Final Judgement: Pass Approved By 2010-09-25 Liuchunlin Date Name Signature Reviewed By 2010-09-25 Dailinjun Date Name Signature Operator 2010-09-25 Liaoxiaoping Date Name Signature FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total23 REPORT BODY CONTENT 1 Status ............................................................................................................................................ 6 1.1 Product Information ....................................................................................................................... 6 1.2 Applied Standard .......................................................................................................................... 6 1.3 Test Site ........................................................................................................................................ 6 1.4 Test environment condition ........................................................................................................... 6 2 Summary of Results ...................................................................................................................... 7 3 Equipment Specification ............................................................................................................... 8 3.1 General Description ...................................................................................................................... 8 3.2 Sub-Assembly Identity .................................................................................................................. 8 4 System Configuration during EMC Test ..................................................................................... 10 4.1 Cables Used during Test ............................................................................................................ 10 4.2 Associated Equipment Used during Test ................................................................................... 10 4.3 Test Configurations and Test Mode ............................................................................................ 10 4.4 Test conditions and test Connections ......................................................................................... 10 5 Electromagnetic Interference (EMI) ............................................................................................ 12 5.1 Radiated Disturbance 30MHz to 18GHz ..................................................................................... 12 5.2 Conducted Disturbance 0.15 MHz to 30MHz ............................................................................. 13 5.3 Radiated Spurious Emissions ..................................................................................................... 13 6 Main Test Instruments ................................................................................................................ 16 7 System Measurement Uncertainty .............................................................................................. 17 8 Graph and Data of Emission Test ............................................................................................... 18 8.1 Radiated Disturbance ................................................................................................................. 18 9 Conducted Disturbance .............................................................................................................. 19 9.1 AC Power Port Test Data.............................................................................................…

Text truncated - open the document above for the full version.

Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total30 FCC RF Test Report Product Name: Handset Phone Model Number: F360 Report No: SYBHZ(R)E046092010EB -2 FCC ID：QISF360 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total30 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total30 Notice 2 Modification Information: Modification Information Modification Information 1 2 3 4 5 6 7 FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page7, Total30 REPORT ON EMC TEST OF Handset Phone M/N: F360 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; START OF TEST Sept.01, 2010 END OF TEST Sept.12, 2010 Final Judgement: Pass Approved By 2010-09-23 Chen Xiaohong Date Name Signature Reviewed By 2010-09-23 Xu Guangyi Date Name Signature Operator 2010-09-23 Lu Xiaoguang Date Name Signature FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total30 REPORT BODY CONTENT 1 SUMMARY ...................................................................................................................................... 6 2 PRODUCT DESCRIPTION ............................................................................................................. 7 2.1 Production Information .................................................................................................................... 7 2.2 Modification Information .................................................................................................................. 7 3 TEST SITE DESCRIPTION ............................................................................................................ 8 3.1 Testing Period ................................................................................................................................. 8 3.2 General Set up Description ............................................................................................................. 8 4 PRODUCT DESCRIPTION ............................................................................................................. 9 4.1 Technical Characteristics ................................................................................................................ 9 4.2 EUT Identification List ................................................................................................................... 11 5 MAIN TEST INSTRUMENTS ........................................................................................................ 12 6 TRANSMITTER MEASUREMENTS ............................................................................................. 13 6.1 Effective Radiated Power of Transmitter (ERP) ........................................................................... 13 6.2 Conducted Power of Transmitter .................................................................................................. 16 6.3 Modulation Characteristics ............................................................................................................ 18 6.4 Occupied Bandwidth ..................................................................................................................... 20 6.5 Band Edges Compliance .............................................................................................................. 22 6.6 Spurious Emission at Antenna Terminal ....................................................................................... 24 6.7 Frequency Stability ........................................................................................................................ 25 7 SYSTEM MEASUREMENT UNCERTAINTY ................................................................................ 29 8 APPENDICES ............................................................................................................................... 30 FCC Test Report of F360 FCC ID: QISF360 Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total30 1 SUMMARY The table below summarizes the measurements and results for the HUAWEI Handset Phone. …

Text truncated - open the document above for the full version.

FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page1, Total24 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page2, Total24 Channel 128（TM1:GSM） FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page3, Total24 Channel 192（TM1:GSM） FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page4, Total24 Channel 251（TM1:GSM） FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page5, Total24 Appendix B Occupied Bandwidth According to FCC Part 2.1049 & Part 22 Subpart H FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page6, Total24 Channel 128（TM1:GSM） FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page7, Total24 Channel 192（TM1:GSM） FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page8, Total24 Channel 251（TM1:GSM） FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page9, Total24 Appendix C Band Edges Compliance According to FCC Part 2.1051 & 22.917 FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page10, Total24 TM1:GSM Left Edge Channel 128 FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page11, Total24 Right Edge Channel 251 FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page12, Total24 TM2:EDGE Appendix D Spurious Emission at Antenna Terminal According to FCC Part 2.1051 & 22.917 FCC Test Report of HUAWEI F360 FCC ID：QISF360 Security Level: Public Report No: SYBHZ(R)E046092010EB -2 Confidential Information of Huawei. No Distribution without Permission Page13, Total24 1.1 TM…

Text truncated - open the document above for the full version.