QISF362Cordless Phone

F362 Cordless Phone User Guide 1 1 Getting to know your F362 1 2 3 45 6 7 8 1 Navigation keys 2 Right function key 3 End key 4 Power indicator 5 Microphone 6 Number and symbol keys 7 Call key 8 Left function key The figures in this guide are provided for your reference only. 2 2 Keys  Access the main menu in standby mode.  Select the option displayed in the lower left corner of the screen.  Make or answer a call.  View the dialed calls in standby mode. Number and symbol keys  Enter numbers, letters and symbols.  Call voicemail in standby mode (by pressing and holding the 1 key).  Number keys 2~9：Speed-dial a user-assigned phone number by pressing and holding a key in standby mode.  Press # key to switch between text input methods in editing mode.  Press * key to display the symbol list in editing mode.  End or reject a call.  Press and hold this key to power the phone on or off.  Return to the standby mode. Select the option displayed in the lower right corner of the screen. 3  Access the main menu by pressing the OK key in standby mode.  Access a shortcut menu by pressing the corresponding navigation key in standby mode.  Adjust the volume by pressing the navigation keys during a call. 3 Screen icons Full reception Full battery Alarm clock Unread message Silent profile activated 4 Installation Ensure that F362 is powered off and disconnected from the power adapter. Installing the SIM card Ensure that the golden contacts of the SIM card are facing downward and that the beveled edge of the SIM card is properly aligned with that of the SIM card slot. Then check that the SIM card is fully inserted. 4 Installing the battery Ensure that the battery is correctly installed. Do not frequently remove the SIM card when using F362. 5 Charging the battery Method 1: Method 2: 5 Powering on Press and hold until the screen lights up to power on the phone.  When new phones are delivered, the battery power is low. Therefore, charge the phone for a while and then power on the phone the first time you use it.  If the phone will not be used for a long time, remove the battery from the phone. If the battery has not been used for a long time or the battery is exhausted, the screen of the phone may not function when you charge the battery again. This is normal. After the battery is being charged for a while, you can power on the phone for use. Press and hold to power off the phone. 6 6 Calling Making a call 1. In standby mode, press the number keys to enter a phone number. 2. Press to dial the number. 3. Press to end the call or cancel the dialing. Answering or rejecting a call When there is an incoming call, press to answer the call; press to reject the call. You can also use the following methods to dial the number:  In standby mode, press to view the dialed calls. Find the desired number in the dialed calls, and then press to dial the number.  Find the desired number in the contacts, and then press to dial the number. 7 7 Messages Sending a message 1. Select Message > Write message. 2. Write the message. 3. Press and then add a recipient using the following methods:  Enter the recipient's phone number.  Add the recipient from the contacts. 4. Press to send the message. Reading a message 1. Select Message > Inbox. 2. Press / to scroll to a message in the list. 3. Press to open and read the message. 8 Text input methods Input methods functions The input methods have following basic functions:  In editing mode, press the # key to switch between input methods. Press to manage the message. 8  In editing mode, you can press to delete the character to the left of the cursor or press and hold to delete all characters.  In predictive and traditional input mode, press the 0 key to enter a space.  In any input method, press the * key to display the symbol list. Traditional input In traditional input mode, press the number keys to enter letters. Press a number key repeatedly until the desired character appears. If the next letter you want to enter is on the same key as the current one, wait until the current letter is entered, and then enter the next one. Predictive input 1. Press the keys labeled with the letters required to spell the desired word once according to the spelling sequence of the word. As you enter letters, the phone attempts to predict the desired word and displays candidate words. 2. Press / to select the desired word. 3. Press to enter the word, or press the 0 key to enter the word followed by a space. Number input  In 123 input mode, enter a desired number by pressing the number k e y.  In traditional input mode, press and hold corresponding number key to enter numbers. 9 9 FM (Optional) FM Radio helps you conveniently listen to the FM radio programs. Select Menu > FM radio, and then press / to switch the channel. Press / to adjust the volume. You can select Options for more operations. 10 Security Setting the phone lock The phone lock protects your phone from unauthorized use. If you enable phone lock, you will be prompted to enter a phone lock code before you use the phone. Select Settings > Security > Power-on password to set the phone lock. You can change the default phone lock code (000000) to a You can connect the provided power cable to your phone for better reception. 10 personal password. It is recommended that you periodically change this phone lock code for enhanced security. Setting the keypad lock In standby mode, press and hold # key to lock the keypad. In this case, you can only dial emergency numbers and answer incoming calls. In standby mode, press and then * key to unlock the keypad. Select Settings > Phone settings > Auto keypad lock to set the keypad lock. If automatic keypad lock function is enabled, the keypad will be automatically locked when the standby time exceeds the preset period in standby mode. PIN and PUK Personal identification number (PIN) code helps effectively prevent unauthorized use of your SIM card. Personal unblocking key (PUK) code he…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date (07/23/2014) BABT FCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Administration Building, Headquarters Shenzhen 518129 China hereby authorize TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park Nantou Checkpoint Road 2 Nanshan District 518052 Shenzhen P.R.CHINA Felix Li Phone: +86-755-88286998-3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: Model name: F362 FCC ID: QISF362 This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd Bantian, Longgang District, Shenzhen, 518129 Guangdong, P.R.China Tel: 0086-0755-28970299 ; Fax: 0086-0755-89650226 Date: July 31, 2014 Statement We, Huawei Technologies Co.,Ltd, states that our device, FCC ID: QISF362, has a battery, But the battery will not be placed in the battery compartment when delivery, it is visible to the users as they purchase the products and install the battery. For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2014-07-23 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISF362 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2015-1-23 External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755- 28970299

Huawei F362 Cordless Phone SECRET Page1, Total5 Photo documentation of external of product Huawei F362 Cordless Phone SECRET Page2, Total5 Huawei F362 Cordless Phone SECRET Page3, Total5 Huawei F362 Cordless Phone SECRET Page4, Total5 Huawei F362 Cordless Phone SECRET Page5, Total5

Huawei F362 Cordless Phone SECRET Page1, Total 1 F362 Label：

Huawei F362 Cordless Phone SECRET Page1, Total 1 F362 Label Location

Huawei F362 Cordless Phone SECRET Page1, Total5 Photo documentation of interior of product Huawei F362 Cordless Phone SECRET Page2, Total5 Huawei F362 Cordless Phone SECRET Page3, Total5 Huawei F362 Cordless Phone SECRET Page4, Total5 Huawei F362 Cordless Phone SECRET Page5, Total5

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Product Name: Cordless Phone Model: F362 Report No.: SYBH(Z-SAR) 001072014-2 FCC ID: QISF362 APPROVED (Lab Manager) PREPARED (Test Engineer) BY DATE 2014-07-15 2014-07-15 The test results of this test report relate exclusively to the item(s) tested. The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report No.:SYBH(Z-SAR)001072014-2 FCC ID:QISF362 2014-07-15 Page 2 of 28 Table of Contents 1 General Information ............................................................................................................................................... 4 1.1 Statement of Compliance .............................................................................................................................. 4 1.2 RF exposure limits ......................................................................................................................................... 5 1.3 EUT Description ............................................................................................................................................ 6 1.3.1 General Description ............................................................................................................................... 7 1.4 Test specification(s) ....................................................................................................................................... 9 1.5 Testing laboratory .......................................................................................................................................... 9 1.6 Applicant and Manufacturer .......................................................................................................................... 9 1.7 Application details .......................................................................................................................................... 9 1.8 Ambient Condition ........................................................................................................................................ 9 2 SAR Measurement System ................................................................................................................................. 10 2.1 SAR Measurement Set-up .......................................................................................................................... 10 2.2 Test environment ......................................................................................................................................... 11 2.3 Data Acquisition Electronics description .................................................................................................... 11 2.4 Probe description ......................................................................................................................................... 12 2.5 Phantom description .................................................................................................................................... 13 2.6 Device holder description ............................................................................................................................ 14 2.7 Test Equipment List ..................................................................................................................................... 15 3 SAR Measurement Procedure ............................................................................................................................ 16 3.1 Scanning procedure .................................................................................................................................... 16 3.2 Spatial Peak SAR Evaluation ...................................................................................................................... 17 3.3 Data Storage and Evaluation ...................................................................................................................... 18 4 System Verification Procedure ............................................................................................................................ 20 4.1 Tissue Verification ....................................................................................................................................... 20 4.2 System Check ............................................................................................................................................. 21 4.3 System check Procedure............................................................................................................................. 22 5 SAR measurement variability and uncertainty .................................................................................................... 23 5.1 SAR measurement variability ...................................................................................................................... 23 5.2 SAR measurement uncertainty ................................................................................................................... 23 6 SAR Test Configuration ....................................................................................................................................... 24 6.1 GSM Test Configuration .............................................................................................................................. 24 7 SAR Measurement Results ...................................................................................…

Text truncated - open the document above for the full version.

Re port No.: SYBH(Z-SAR)001072014-2FCC ID: QISF362 Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D835-EX-Head SystemPerformanceCheck-D1900-EX-Head Date: 2014-7-7 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Head DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.907 S/m; ε r = 41.935; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(10.32, 10.32, 10.32); Calibrated: 2014-3-10; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=15mm, Pin=250mW/Area Scan (6x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.52 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.80 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.63 W/kg SAR(1 g) = 2.42 W/kg; SAR(10 g) = 1.59 W/kg Maximum value of SAR (measured) = 2.84 W/kg 0 dB = 2.84 W/kg = 4.53 dBW/kg Date: 2014-7-7 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Head DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.414 S/m; ε r = 39.489; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.2, 8.2, 8.2); Calibrated: 2014-3-10; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 8.81 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 90.07 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 17.6 W/kg SAR(1 g) = 9.99 W/kg; SAR(10 g) = 5.28 W/kg Maximum value of SAR (measured) = 12.5 W/kg 0 dB = 12.5 W/kg = 10.98 dBW/kg

Report No.: SYBH(Z-SAR)001072014-2 FCC ID: QISF362 Appendix B. SAR Measurement Plots Table of contents GSM850 Head GSM1900 Head Date: 2014-7- 7 Test Laboratory: HUAWEI SAR/HAC Lab F362 GSM850 190CH Right hand touch cheek DUT: F362; Type: Cordless Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.909 S/m; ε r = 41.918; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(10.32, 10.32, 10.32); Calibrated: 2014-3- 10; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Head/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.510 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.986 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.632 W/kg SAR(1 g) = 0.477 W/kg; SAR(10 g) = 0.329 W/kg Maximum value of SAR (measured) = 0.540 W/kg 0 dB = 0.540 W/kg = -2.68 dBW/kg Date: 2014-7-7 Test Laboratory: HUAWEI SAR/HAC Lab F362 GSM1900 661CH Right hand touch cheek with battery 2# DUT: F362; Type: Cordless Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 1880 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 1880 MHz; σ = 1.393 S/m; ε r = 39.596; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.2, 8.2, 8.2); Calibrated: 2014-3-10; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Head/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.299 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.438 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.385 W/kg SAR(1 g) = 0.260 W/kg; SAR(10 g) = 0.163 W/kg Maximum value of SAR (measured) = 0.305 W/kg 0 dB = 0.305 W/kg = -5.16 dBW/kg

Justification of the extended calibration of Dipole D 835V2 SN:4d059 Per KDB 865664, we have Measured the Impedance and Return Loss as below, and the r etur n los s is <-20dB, with 20% of prior calibration; t he real or imaginary parts of t he impedance is with 5 ohm of prior calibr ation . Therefore the verification result should support extended calibration. Dipole835 Head TST Target Value Measured Value Difference Impedance transformed to feed point 51.7Ω-2.7jΩ 50.43Ω-2.79jΩ R=-1.27Ω, X=-0.09Ω Return Loss -30.2dB -30.16dB 0.13% Dipole835 Body TST Target Value Measured Value Difference Impedance transformed to feed point 47.1Ω-4.7jΩ 46.74Ω-4.96jΩ R=-0.36Ω, X=-0.26Ω Return Loss -24.9dB -24.63dB 1.08% Measured Date 2013-05-02 2014-05-01 ----- Impedance Test-Head Return Loss Test-Head

Justification of the extended calibration of Dipole D1900V2 SN: 5d143 Per KDB 865664, we have Measured the Impedance and Return Loss as below, and the return loss is <-20dB, with 20% of prior calibration; the real or imaginary parts of the impedance is with 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole1900 Head TST Target Value Measured Value Difference Impedance transformed to feed point 53.5Ω+5.8jΩ 53.26Ω+5.99jΩ R=-0.24Ω, X=0.19Ω Return Loss -23.7dB -25.10dB -5.91% Dipole1900 Body TST Target Value Measured Value Difference Impedance transformed to feed point 48.4Ω+6.1jΩ 50.44Ω+6.40jΩ R=2.04Ω, X=0.3Ω Return Loss -23.9dB -24.91dB -4.23% Measured Date 2011-09-26 2013-09-12 ----- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 45 Appendix for test report RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 45 1Appendix_A: Effective (Isotropic) Radiated Power Output Data Part I - Test Results Test Band Test Mode Test Channel Measure d[dBm] ERP/EIRP(dBm) Limit [dBm] Verdict GSM850 GSM/TM1 LCH 32.15 31 38.5 PASS MCH 32.18 31.03 38.5 PASS HCH 32.12 30.97 38.5 PASS GSM1900 GSM/TM1 LCH 28.88 29.88 33 PASS MCH 28.83 29.83 33 PASS HCH 29.1 30.1 33 PASS Note1: a, For getting the ERP (Efficient Radiated Power) or EIRP (Efficient Isotropic Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] - Cable Loss [dB] + Gain [dBd] EIRP [dBm] = SGP [dBm] - Cable Loss [dB] + Gain [dBi] b, SGP=Signal Generator Level Note2: RBW > emission bandwidth, VBW > 3 x RBW. Detector: RMS RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 45 2Appendix_B: Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB] Limit [dB] Verdict GSM850 GSM/TM1 LCH 0.14 13 PASS MCH 0.14 13 PASS HCH 0.15 13 PASS GSM1900 GSM/TM1 LCH 0.1 13 PASS MCH 0.13 13 PASS HCH 0.14 13 PASS RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 45 3Appendix_C: Modulation Characteristics Part I - Test Plots 3.1 For GSM 3.1.1 Test Band = GSM850 3.1.1.1 Test Mode = GSM/TM1 3.1.1.1.1 Test Channel = MCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 45 3.1.2 Test Band = GSM1900 3.1.2.1 Test Mode = GSM/TM1 3.1.2.1.1 Test Channel = MCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 45 4Appendix_D: Bandwidth Part I - Test Results Test Band Test Mode Test Channel Occupied Bandwidth [kHz] Emission Bandwidth [kHz] Verdict GSM850 GSM/TM1 LCH 244.98 315.58 Pass MCH 245.21 316.36 Pass HCH 251.25 317.89 Pass GSM1900 GSM/TM1 LCH 245.47 323.18 Pass MCH 244.40 319.64 Pass HCH 245.22 313.96 Pass RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 7 of 45 Part II - Test Plots 4.1 For GSM 4.1.1 Test Band = GSM850 4.1.1.1 Test Mode = GSM/TM1 4.1.1.1.1 Test Channel = LCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 8 of 45 4.1.1.1.2 Test Channel = MCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 9 of 45 4.1.1.1.3 Test Channel = HCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 10 of 45 4.1.2 Test Band = GSM1900 4.1.2.1 Test Mode = GSM/TM1 4.1.2.1.1 Test Channel = LCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 11 of 45 4.1.2.1.2 Test Channel = MCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 12 of 45 4.1.2.1.3 Test Channel = HCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 13 of 45 5Appendix_E: Band Edges Compliance Part I - Test Plots 5.1 For GSM 5.1.1 Test Band = GSM850 5.1.1.1 Test Mode = GSM/TM1 5.1.1.1.1 Test Channel = LCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 14 of 45 5.1.1.1.2 Test Channel = HCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 15 of 45 5.1.2 Test Band = GSM1900 5.1.2.1 Test Mode = GSM/TM1 5.1.2.1.1 Test Channel = LCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 16 of 45 5.1.2.1.2 Test Channel = HCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 17 of 45 6Appendix_F: Spurious Emission at Antenna Terminal NOTE: For the averaged unwanted emissions measurements, the measurement points in each sweep is greater than twice the Span/RBW in order to ensure bin-to-bin spacing of < RBW/2 so that narrowband signals are not lost between frequency bins. As to the present test item, the "Measurement Points = k * (Span / RBW)" with k between 4 and 5, which results in an acceptable level error of less than 0.5 dB. Part I - Test Plots 6.1 For GSM 6.1.1 Test Band = GSM850 6.1.1.1 Test Mode = GSM/TM1 6.1.1.1.1 Test Channel = LCH RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 18 of 45 RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 19 of 45 RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 20 of 45 RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 21 of 45 RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologi…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: Cordless Phone Model Number: F362 Report No: SYBH(Z-RF)001072014-2001 FCC ID：QISF362 Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of F362 Report No: SYBH(Z-RF)001072014-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 21 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in par…

Text truncated - open the document above for the full version.