QISFC312ECordless Phone

FC312E Cordless Phone USER GUIDE Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. 1 Your Cordless Phone 1 2 3 4 5 6 7 8 9 10 11 12 Note: The figures of the cordless phone in this document are provided for your reference only. The product appearance may vary according to products. NO. Item NO. Item 1 Earpiece 7 Charger interface 2 Screen 8 * key 3 Right soft key 9 Number keys 4 End key 10 Call/Redial key 5 # key 11 Left Soft key 6 Microphone 12 Scroll keys 2 Keys and Functions Press... To... Right soft key z Access the Contacts screen in standby mode. z Select the option displayed on the lower right. End key z Power on or off the cordless phone by pressing and holding it in the standby mode. z End a call or reject an incoming call. z Return to the standby mode. # key Switch between different input modes in editing mode. * key Access the symbol screen in editing mode. Number keys z Enter numbers, letters, and symbols. z Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys). Call/Redial key z Make or answer a call. z View the call history in standby mode. Left soft key z Access the main menu in standby mode. z Select the option displayed in the lower left corner of the screen. 3 Press... To... Scroll keys z Access the shortcut screen in standby mode. z Access the main menu by press the OK key in standby mode. z During a call, press left key or right key to adjust the volume of the earpiece. Screen Icons Icon Indicates IconIndicates Network signal strength Battery power level Calling Alarm clock is on z Message received z Memory for messages is full, when the icon is blinking Keypad is locked Remind by sound Remind by vibration 4 Menu Tree Contacts SMS Call history 1. Contacts 2. Create 3. Speed-dial 4. Management 1. Write message 2. Inbox 3. Outbox 4. Drafts 5. Voicemail 6. Broadcast message 7. Settings 1. All Calls 2. Missed Calls 3. Received Calls 4. Dialed Calls Tools FM radio (Optional) Settings 1. Alarm 1. Display settings 2. Phone settings 3. Audio settings 4. Call settings 5. Security settings 6. Restore Factory Settings 5 Installing the SIM Card and Battery Make sure that the golden area on the SIM card is facing downwards and that the beveled edge of the SIM card is properly aligned with that of the card slot. Charging the Battery Charging the battery in either of the following ways: z Method 1: z Method 2: 6 Note: z Remove the battery if the cordless phone is left unused for a long period. z If the battery of the cordless phone has not been used for a long time or the battery is exhausted, the screen of the cordless phone may not function when you charge the battery again. This is normal. After the battery is being charged for a while, you can power on the cordless phone for use. z Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Using the Function Menu 1. In the standby mode, press to display the Menu screen. 2. Press scroll keys to scroll in the menu. 3. Press to display the menu. 4. Press the Up or Down key to scroll to a submenu item and press to select the submenu. 5. Press to return to the previous menu or return to the home screen. 6. Press to return to the home screen. Making a Call 1. In the standby mode, enter a phone number. 2. Press to dial the number. 3. Press to end the call. 7 Note: z In the standby mode, press to view the call history. Select a record and press to dial this number. z Select a contact from the cordless phonebook and press to call this contact. z When the cordless phone is locked, enter the lock code to unlock the cordless phone first; otherwise, you can only make emergency calls or answer calls. z During a call, press key to switch the hands free. Answering a Call When the…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: MET LABORATORIES, INC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality MET LABORATORIES, INC. 914 W. Patapsco Avenue Baltimore MarylandUnited States Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISFC312E to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei FC312E Cordless Phone SECRET Photo documentation of external of product Page1, Total6 Huawei FC312E Cordless Phone SECRET Page2, Total6 Huawei FC312E Cordless Phone SECRET Page3, Total6 Huawei FC312E Cordless Phone SECRET Page4, Total6 Huawei FC312E Cordless Phone SECRET Page5, Total6 Huawei FC312E Cordless Phone SECRET Page6, Total6

Huawei FC312E Cordless Phone SECRET FC312E Label： Page1, Total 1

Huawei FC312E Cordless Phone SECRET FC312e Label Location Page1, Total 1

Huawei ETS3125i Fixed Wireless Terminal SECRET Page1, Total5 Photo documentation of interior of product Huawei ETS3125i Fixed Wireless Terminal SECRET Page2, Total5 Huawei ETS3125i Fixed Wireless Terminal SECRET Page3, Total5 Huawei ETS3125i Fixed Wireless Terminal SECRET Page4, Total5 Huawei ETS3125i Fixed Wireless Terminal SECRET Page5, Total5

No.2010EEE03440 Page 61 of 87 ANNEX E PROBE CALIBRATION CERTIFICATE No.2010EEE03440 Page 62 of 87 No.2010EEE03440 Page 63 of 87 No.2010EEE03440 Page 64 of 87 No.2010EEE03440 Page 65 of 87 No.2010EEE03440 Page 66 of 87 No.2010EEE03440 Page 67 of 87 No.2010EEE03440 Page 68 of 87 No.2010EEE03440 Page 69 of 87 No.2010EEE03440 Page 70 of 87 ANNEX F DIPOLE CALIBRATION CERTIFICATE 835 MHz Dipole Calibration Certificate No.2010EEE03440 Page 71 of 87 No.2010EEE03440 Page 72 of 87 No.2010EEE03440 Page 73 of 87 No.2010EEE03440 Page 74 of 87 No.2010EEE03440 Page 75 of 87 No.2010EEE03440 Page 76 of 87 No.2010EEE03440 Page 77 of 87 No.2010EEE03440 Page 78 of 87 No.2010EEE03440 Page 79 of 87 1900 MHz Dipole Calibration Certificate No.2010EEE03440 Page 80 of 87 No.2010EEE03440 Page 81 of 87 No.2010EEE03440 Page 82 of 87 No.2010EEE03440 Page 83 of 87 No.2010EEE03440 Page 84 of 87 No.2010EEE03440 Page 85 of 87 No.2010EEE03440 Page 86 of 87 No.2010EEE03440 Page 87 of 87

No.2010EEE03440 Page 2 of 87 TABLE OF CONTENT 1 TEST LABORATORY..................................................................................................................3 1.1 TESTING LOCATION........................................................................................................................................ 3 1.2 TESTING ENVIRONMENT................................................................................................................................. 3 1.3 PROJECT DATA............................................................................................................................................... 3 1.4 SIGNATURE..................................................................................................................................................... 3 2 CLIENT INFORMATION..............................................................................................................4 2.1 APPLICANT INFORMATION.............................................................................................................................. 4 2.2 MANUFACTURER INFORMATION..................................................................................................................... 4 3 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................5 3.1 ABOUT EUT ................................................................................................................................................... 5 3.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST.......................................................................... 5 3.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST............................................................................. 5 4 CHARACTERISTICS OF THE TEST ..........................................................................................5 4.1 APPLICABLE LIMIT REGULATIONS.................................................................................................................. 5 4.2 APPLICABLE MEASUREMENT STANDARDS...................................................................................................... 5 5 OPERATIONAL CONDITIONS DURING TEST ..........................................................................6 5.1 SCHEMATIC TEST CONFIGURATION................................................................................................................. 6 5.2 SAR MEASUREMENT SET-UP.......................................................................................................................... 6 5.3 DASY4 E-FIELD PROBE SYSTEM..................................................................................................................... 7 5.4 E-FIELD PROBE CALIBRATION........................................................................................................................ 8 5.5 OTHER TEST EQUIPMENT...............................................................................................................................9 5.6 EQUIVALENT TISSUES................................................................................................................................... 10 5.7 SYSTEM SPECIFICATIONS.............................................................................................................................. 10 6 LABORATORY ENVIRONMENT .............................................................................................. 11 7 CONDUCTED OUTPUT POWER MEASUREMENT................................................................. 11 7.1 SUMMARY.................................................................................................................................................... 11 7.2 CONDUCTED POWER.................................................................................................................................... 11 8 TEST RESULTS ........................................................................................................................12 8.1 DIELECTRIC PERFORMANCE......................................................................................................................... 12 8.2 SYSTEM VALIDATION.................................................................................................................................... 12 8.3 SUMMARY OF MEASUREMENT RESULTS....................................................................................................... 13 8.4 CONCLUSION................................................................................................................................................ 15 9 MEASUREMENT UNCERTAINTY ............................................................................................15 10 MAIN TEST INSTRUMENTS ..................................................................................................16 ANNEX A MEASUREMENT PROCESS....................................................................................17 ANNEX B TEST LAYOUT .........................................................................................................18 ANNEX C GRAPH RESULTS....................................................................................................23 ANNEX D SYSTEM VALIDATION RESULTS ...........................................................................57 ANNEX E PROBE CALIBRATION CERTIFICATE....................................................................61 ANNEX F DIPOLE CALIBRATION CERTIFICATE ...................................................................70 No.2010EEE03440 Page 4 of 87 2 Client Information 2.1 Applicant Information Company Name: HUAWEI Technologies Co., Ltd Address /Post: Bantian, Longgang District City: Shenzhen Postal Code: 518129 Country: P.R. China Telephone: 0755-28780808 Fax: 0755-28780808 2.2 Manufacturer Information Company Name: HUAWEI Technologies Co., Ltd Address /Post: Bantian, Longgang District City: Shenzhen Postal …

Text truncated - open the document above for the full version.

HUAWEI FC312E Electromagnetic Radiation Exposure Estimation 1 Maximum Permissible Exposure (MPE) Estimation for FC312E 1 Introduction HUAWEI FC312E is Wireless Module equipments in the GSM/GRPS system, for FC312E, the frequency band is GSM850 and PCS1900. The Wireless Module implement such functions as RF signal receiving / Transmitting, GSM protocol processing, SMS service etc. 2 Limits and Guidelines on Exposure to Electromagnetic Fields According to the FCC Part 2.1091, we know: mobile device (transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters radiating structure(s) and the body of the user or nearby persons). And the Cellular radiotelephone service and PCS services are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if they operate at frequencies of 1.5 GHz or below and their effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. The radiated power of 850MHz for FC312E is 1W, so the FC312E are excluded from routine environmental evaluation for RF exposure according to the requirement of FCC Part 2.1091. The present document is given just only for reference. Uncontrolled limits are used for general public. General population/uncontrolled exposure apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. The exposure levels can be expressed in terms of power density, electric field strength, or magnetic field strength, as averaged over 30 minutes for the general public and 6 minutes for trained personnel. The exposure criterion is frequency dependent, and a chart covering the range from 3 kHz to 100 GHz can be found in NCRP No.86 (references IEEE C95.1-1999). Below are the limits. Limits for Occupational/Controlled Exposure HUAWEI FC312E Electromagnetic Radiation Exposure Estimation 2 Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-3.0 3.0-30 30-300 300-1500 15,00-100,000 614 1842/f 61.4 -- -- 16.3/f 16.3/f 0.163 -- -- (100)* (900/f2)* 1.0 f/300 5 Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-1.34 1.34-30 30-300 300-15,00 15,00-100,000 614 824/f 27.5 -- -- 1.63 2.19/f 0.073 -- -- (100)* (180/f2)* 0.2 f/1500 1.0 For mostly safe in the extreme condition, we take the lowest frequency to calculate, here, the lowest TX frequency of US cellular (824MHz) is taken. Power density S [mW/cm2] for controlled area at 824 MHz 75.2 300 248 300 )( === MHzf S mW/cm 2 Power density S [mW/cm2] for uncontrolled area at 824 MHz 55.0 1500 248 1500 )( === MHzf S mW/cm 2 S= 0.55 mW/cm 2 = 5.5 W/m 2 for uncontrolled exposure Power density S [mW/cm2] for uncontrolled area at 1900/2400 MHz S=1 mW/cm 2 Reference levels are provided for exposure assessment to determine whether the basic restrictions on exposure of humans to electromagnetic fields are exceeded. The basic restrictions on exposure to electromagnetic fields are based directly on established health effects and biological considerations. HUAWEI FC312E Electromagnetic Radiation Exposure Estimation 3 3 Location of EUT The EUT uses one monopole antenna. The source of the radiation is mounted on terminal; generally the direction of the antenna position is uprightness tabletop. The highest level of emission would be expected in close vicinity of the antenna and in line of sight to the antenna. 4 Prediction of the Exposure to Electromagnetic Fields Calculations can be made on a site by site basis to ensure the power density is below the limits given above, or guidelines can be done beforehand to ensure the minimum distances from the antenna is maintained through the site planning. The calculations are based on FCC OET 65 Appendix B. 4.1 Calculation of the Safe Distance Below method describes a theoretical approach to calculate possible exposure to electromagnetic radiation around a base station transceiver antenna. Precise statements are basically only possible either with measurements or complex calculations considering the complexity of the environment (e.g. soil conditions, near buildings and other obstacles) which causes reflections, scattering of electromagnetic fields. The maximum output power (given in EIRP) of a base station is usually limited by license conditions of the network operator. A rough estimation of the expected exposure in power flux density on a given point can be made with the following equation. The calculations are based on FCC OET 65 Appendix B. π∗∗ ∗ = )(4 )( 2 mr GWP S numeric Whereas: P = Maximum output power in W of the site G numeric = Numeric gain of the antenna relative to isotropic antenna R = distance between the antenna and the point of exposure in meters 4.2 Technical Description FC312E Technical Specification: HUAWEI FC312E Electromagnetic Radiation Exposure Estimation 4 Cellular Band ERP: 32.89dBm for GSM850MHz Transmitter frequency band GSM850 Frequency range: 850M： Uplink:824 M~849M； Downlink:869 M~894M PCS Band EIRP: 30.00 dBm for GSM1900MHz Transmitter frequency band GSM1900 Frequency range: 1900M： Uplink:1850 M~1910M； Downlink:1930M~1990M 4.3 Estimation of compliance boundary for indoor antenna 1) Cellular Band: GSM850 For the final determination of the compliance boundary the model for far-field calculation is used since this overestimates the field strength in the near-field region. Thus the calculated compliance boundary should be rather more conservative and on the safe side. For EUT the following compliance boundary is calculated: One time slot ERP: …

Text truncated - open the document above for the full version.

FCC Test Report Product Name: Cordless Phone Model Number: HUAWEI FC312E Report No: SYBHZ(R)E047052010EB-2 FCC ID: QISFC312E Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public Report No: SYBHZ(R)E047052010EB-3 Confidential Information of Huawei. No Distribution without Permission Page1, Total28 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is C2583, R2364, and T256. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public Report No: SYBHZ(R)E047052010EB-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total28 REPORT ON FCC Test of HUAWEI FC312E Cordless Phone M/N: FC312E Report No: SYBHZ(R) E047052010EB-2 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; Final Judgement: Pass General Manager 2010.05.29 张兴海 Date Name signature Technical Responsibility For Area of Testing 2010.05.29 余 辉 Date Name signature Test Lab Engineer 2010.05.27 胡 俊 Date Name signature FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public Contents 1 Summary.................................................................................................................................................... 5 2 Product Description.................................................................................................................................. 6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..................................................................................................................... 12 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................... 12 6.2 CONDUCTED POWER OF TRANSMITTER................................................................................................. 15 6.3 MODULATION CHARACTERISTICS.......................................................................................................... 17 6.4 OCCUPIED BANDWIDTH........................................................................................................................ 19 6.5 BAND EDGES COMPLIANCE.................................................................................................................. 21 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 23 6.7 FREQUENCY STABILITY........................................................................................................................ 24 7 System Measurement Uncertainty......................................................................................................... 27 8 Appendices.............................................................................................................................................. 28 Report No: SYBHZ(R)E047052010EB-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total28 FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public 1 Summary The table below summarizes the measurements and results for the HUAWEI GSM Cordless P…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: Cordless Phone Model Number: HUAWEI FC312E Report No: SYBHZ(R) E047052010EB-3 FCC ID: QISFC312E Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report No: SYBHZ(R)E047052010EB-3 Confidential Information of Huawei. No Distribution without Permission Page2, Total29 FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public REPORT ON FCC Test of HUAWEI FC312E Cordless Phone M/N: HUAWEI FC312E Report No: SYBHZ(R)E047052010EB-3 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; CONCLUSION Pass General Manager 2010.05.29 Date Name signature Technical Responsibility For Area of Testing 2010.05.29 Date Name signature Test Lab Engineer 2010.05.28 Date Name signature Report No: SYBHZ(R)E047052010EB-3 Confidential Information of Huawei. No Distribution without Permission Page3, Total29 FCC Test Report of HUAWEI FC312E FCC ID：QISFC312E Security Level: Public Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION..............................................................................................................…

Text truncated - open the document above for the full version.