QISG1000GSM Mobile Phone

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. i Contents Your Phone ........................................................................................... 1 Keys and Functions ........................................................................... 2 Screen Icons ......................................................................................... 4 Installing the SIM Card .................................................................... 5 Removing the SIM Card.................................................................. 6 Charging the Battery........................................................................ 6 Working with the Function Menus............................................. 7 Making a Call....................................................................................... 7 Answering a Call................................................................................. 8 Phone Lock ........................................................................................... 9 PIN and PUK ........................................................................................ 9 Locking the Keypad .......................................................................... 9 Changing the Text Input Modes................................................10 Multi-tap Input Mode ....................................................................10 Predictive Input Mode ...................................................................11 Entering a Digit.................................................................................11 Entering a Symbol ...........................................................................12 Flashlight (Optional) .......................................................................12 FM Radio (Optional) .......................................................................12 Warnings and Precautions ...........................................................13 1 Features marked with “Optional” are optional. These features may vary according to certain models. Your Phone The following figure shows the appearance of your phone and it is for your reference only. 1 Earpiece 7 Flashlight 2 Screen 8 # key 3 Left soft key 9 Number keys 4 Navigation key 10End/Power key 2 5 Call/Answer key 11Right soft key 6 * key 12Charger jack Keys and Functions Press... To...  Make a call.  Answer a call.  Access Dialed calls in standby mode.  Power the phone on or off (by pressing and holding the key for about 3s).  End or reject a call.  Return to the standby mode.  Access Menu in standby mode.  Select a highlighted item.  Access Contacts in standby mode.  Return to the previous menu. 3 Press... To...  Tur n t he Flashlighton (by pressing and holding for about 3s or by pressing twice in standby mode).  Tur n t he Flashlight off ().  Access the Alarm clock ( ) in standby mode.  Access Call Records ( ) in standby mode.  Access the Calculator ( ) in standby mode.  Increase the volume ( ) or decrease the volume ( ) during a call. -  Enter numbers, letters, and symbols.  Enter + in standby mode (by pressing and holding the 0 key for about 3s).  Call the voicemail in standby mode (by pressing and holding the 1 key for about 3s).  Speed-dial phone numbers in standby mode (by pressing and holding the desired key 2–9 for about 3s).  Select a submenu item labeled with the corresponding number. 4 Press... To...  Enter * (by pressing the key) or enter P (by pressing and holding the key) in standby mode.  Display the symbol list in any input mode.  Enter #.  Lock the keypad in standby mode (by pressing and holding the key for about 3s).  Switch between input methods in text editing mode. If the phone cannot be powered on after you press and hold , the battery may run out of power. In that case, charge the phone for about five minutes (during this period, the charging icon may not be displayed on the screen), and then power on the phone again. Screen Icons Icon Description Signal strength. New text message. 5 Roaming. Call forwarding enabled. Alarms enabled. Keypad locked. Battery power level. Standard profile activated. Conference profile activated. Outdoor profile activated. Mute profile activated. Customize profile activated. FM Radio activated. Missed call(s). Installing the SIM Card Before installing the Subscriber Identification Module (SIM) card, ensure that your phone is powered off. When inserting a SIM card, ensure that the golden contact area on the SIM card is facing downward and that the beveled edge of the SIM card is properly aligned with that of the SIM card slot. 6 Removing the SIM Card Before removing the SIM card, ensure that your phone is powered off. If the phone does not work properly or if crashes occur, you can press and hold the battery reset button on the right side of the SIM card slot until the phone is powered on again. Charging the Battery To charge the battery, do the following: 1. Connect the charger to an alternating current (AC) power socket. 2. Connect the charger to the charger jack on the phone. 7 3. Wait until the battery is completely charged. When the battery is being cha…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date: 2011/04/28 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG1000 USB function explanation Part 15B testing is not necessary for this device because the USB port is for software upgrade, no data transmission function. End users are not able to connect to PC for data transmission via USB port. Due to above reasons, this device didn’t perform Part 15B testing, and FCC logo shouldn’t be on the label. Your understanding will be highly appreciated. Sincerely, Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Date: April 28, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG1000 ATTESTATION FCC ID: QISG1000 Product: GSM Mobile Phone Model: HUAWEI G1000 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

RF_160, Issue 02 Huawei Technologies Co.,Ltd Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 City:  SHENZHEN . Country:China . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: GSM Mobile Phone Type designation:  HUAW EI G1000 Trademark:  HUAW EI . on our behalf. Date:  2011/04/28.. City:  SHENZHEN .. Name:  Zhang Xinghai .. (2) Function: ......Manager............................... Signature:  Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Huawei Technologies Co.,Ltd Date：April 28, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG1000 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description 4 BOM List 5 Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Report No： 114S066R-HP-US-P07V01 Page: 41 of 49 Appendix 2 – EUT Photograph (1) EUT Photo (2) EUT Photo Report No： 114S066R-HP-US-P07V01 Page: 48 of 49 (15) EUT Photo (Adapter #1) (16) EUT Photo (Adapter #1) Report No： 114S066R-HP-US-P07V01 Page: 49 of 49 (17) EUT Photo (Adapter #2) (18) EUT Photo (Adapter #2)

50# G1000 DengXuefang/20101210 20101210 Deng Xuefang 0.4mm 1.5mm Label size:30*20+25*8mm;Corner Radius:1mm; Label material:50#_ 1mm Arial, 3.1mm logo5.1mm5.1mm 34mm 59mm 10507125-00 101227-0003 MODEL: HUAWEI G1000 FCC ID: QISG1000 S/N: XXXXXXXXXXXXX IMEI: XXXXXXXXXXXX IMEI: XXXXXXXXXXXX FCC ID: QISG1000

Report No： 114S066R-HP-US-P07V01 Page: 42 of 49 (3) EUT Photo (4) EUT Photo Report No： 114S066R-HP-US-P07V01 Page: 43 of 49 (5) EUT Photo (6) EUT Photo Report No： 114S066R-HP-US-P07V01 Page: 44 of 49 (7) EUT Photo (8) EUT Photo Report No： 114S066R-HP-US-P07V01 Page: 45 of 49 (9) EUT Photo (10) EUT Photo Report No： 114S066R-HP-US-P07V01 Page: 46 of 49 (11) EUT Photo (12) EUT Photo

Report No：114S066R-HP-US-P03V01 Page: 1 of 92 SAR Test Report Product Name : GSM Mobile Phone Model No. : G1000 FCC ID : QISG1000 Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 22/04/2011 Date of Test : 26/04/2011 Issued Date : 28/04/2011 Report No. : 114S066R-HP-US-P03V01 Report Version : V1.1 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Report No：114S066R-HP-US-P03V01 Page: 2 of 92 Test Report Certification Issued Date: 28/04/2011 Report No: 114S066R-HP-US-P03V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : G1000 FCC ID : QISG1000 Brand Name : HUAWEI EUT Voltage : DC 3.7V Applicable Standard : FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Head: 1.270 W/kg Body: 0.451 W/kg Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No：114S066R-HP-US-P03V01 Page: 3 of 92 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No：114S066R-HP-US-P03V01 Page: 4 of 92 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................6 1.1. EUT Description ..................................................................................................6 1.2. Test Environment.................................................................................................7 2. SAR Measurement System ......................................................................................8 2.1. DASY5 System Description.................................................................................8 2.1.1. Applications .....................................................................................................9 2.1.2. Area Scans ......................................................................................................9 2.1.3. Zoom Scan (Cube Scan Averaging) ................................................................9 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ...........................................9 2.2. DASY5 E-Field Probe........................................................................................10 2.2.1. Isotropic E-Field Probe Specification .............................................................10 2.3. Boundary Detection Unit and Probe Mounting Device...................................... 11 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................ 11 2.5. Robot.................................................................................................................12 2.6. Light Beam Unit .................................................................................................12 2.7. Device Holder ....................................................................................................13 2.8. SAM Twin Phantom...........................................................................................13 3. Tissue Simulating Liquid .......................................................................................14 3.1. The composition of the tissue simulating liquid .................................................14 3.2. Tissue Calibration Result...................................................................................15 3.3. Tissue Dielectric Parameters for Head and Body Phantoms .............................16 4. SAR Measurement Procedure ...............................................................................17 4.1. SAR System Validation......................................................................................17 4.1.1. Validation Dipoles ..........................................................................................17 4.1.2. Validation Result ............................................................................................18 4.2. SAR Measurement Pr…

Text truncated - open the document above for the full version.

FCC Part22H&24E Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G1000 FCC ID : QISG1000 Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 22/04/2011 Test Date : 22/04/2011~ 26/04/2011 Issued Date : 27/04/2011 Report No. : 114S066R-HP-US-P07V01 Report Version : V 1.1 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 114S066R-HP-US-P07V01 Page: 2 of 49 Test Report Certification Issued Date : 27/04/2011 Report No. : 114S066R-HP-US-P07V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI G1000 FCC ID : QISG1000 EUT Voltage : DC 3.7V Trade Name : HUAWEI Applicable Standard : FCC CFR Title 47 Part 2,TIA/EIA 603-C FCC Part22 Subpart H, FCC Part24 Subpart E Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No： 114S066R-HP-US-P07V01 Page: 3 of 49 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. : BSMI, NCC, TAF Germany : TUV Rheinland Norway : Nemko, DNV USA : FCC, NVLAP Japan : VCCI Report No： 114S066R-HP-US-P07V01 Page: 4 of 49 TABLE OF CONTENTS Description Page 1. General Information ...................................................................................................... 6 1.1. EUT Description ........................................................................................................ 6 1.2. Mode of Operation .................................................................................................... 7 1.3. Tested System Details .............................................................................................. 8 1.4. Configuration of Tested System................................................................................ 9 1.5. EUT Exercise Software ........................................................................................... 10 2. Technical Test ............................................................................................................. 11 2.1. Summary of Test Result .......................................................................................... 11 2.2. Test Environment .................................................................................................... 12 3. Peak Output Power..................................................................................................... 13 3.1. Test Equipment .......................................................................................................13 3.2. Test Setup ............................................................................................................... 14 3.3. Limit ........................................................................................................................ 14 3.4. Test Procedure ........................................................................................................ 15 3.5. Uncertainty .............................................................................................................. 16 3.6. Test Result.............................................................................................................. 17 4. Occupied Bandwidth................................................................................................... 19 4.1. Test Equipment .......................................................................................................19 4.2. Test Setup ............................................................................................................... 19 4.3. Limit ........................................................................................................................ 20 4.4. Test Procedure ..................................…

Text truncated - open the document above for the full version.

Report No：114S066R-HP-US-P03V01 Page: 57 of 92 Appendix C. Test Setup Photographs & EUT Photographs Test Setup Photographs Left-Cheek Touch Left-Tilt 15° Report No：114S066R-HP-US-P03V01 Page: 58 of 92 Right-Cheek Touch Right-Tilt 15° Report No：114S066R-HP-US-P03V01 Page: 59 of 92 Body SAR Back 15mm Body SAR Front 15mm Report No：114S066R-HP-US-P03V01 Page: 60 of 92 Body SAR Back 15mm with Headset Report No：114S066R-HP-US-P03V01 Page: 61 of 92 Depth of the liquid in the phantom – Zoom in Note: The position used in the measurements were according to IEEE 1528 - 2003 Report No： 114S066R-HP-US-P07V01 Page: 39 of 49 Appendix 1 – Test Setup Photograph Description: Radiated Spurious Emission Test Setup for Below 1 GHz Description: Substitution Antenna Test Setup for Below 1 GHz Report No： 114S066R-HP-US-P07V01 Page: 40 of 49 Description: Radiated Spurious Emission Test Setup for Above 1 GHz Description: Substitution Antenna Test Setup for Above 1 GHz Report No： 114S066R-HP-US-P01V02 Page: 20 of 40 3.7. Test Photograph Description: Conducted Emission Test Setup for test-Mode 1 with Adapter #1 Description: Conducted Emission Test Setup for test-Mode 1 with Adapter #2 Report No： 114S066R-HP-US-P01V02 Page: 30 of 40 4.7. Test Photograph Description: Radiated Emission Test Setup for Below 1GHz-Mode 1 with Adapter #1 Description: Radiated Emission Test Setup for Below 1GHz-Mode 1 with Adapter #2 Report No： 114S066R-HP-US-P01V02 Page: 31 of 40 Description: Radiated Emission Test Setup for Below 1GHz-Mode 2