QISG1101GSM Mobile Phone

G1101 GSM Mobile Phone User Guide Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Table of Contents Your Phone.......................................1 Keys and Functions...............................2 Screen Icons.....................................4 Installing the SIM Card..........................4 Removing the SIM Card............................5 Charging the Battery.............................6 Using the Function Menu..........................6 Creating a phone number..........................6 Searching a phone number.........................7 Making a Call....................................7 Answering a Call.................................8 Phone Lock.......................................8 PIN and PUK......................................8 Locking the Keypad...............................9 Changing the Text Input Modes....................9 Multi-tap Input Mode............................10 Predictive Input Mode...........................10 Entering Digits.................................11 Entering Symbols................................11 FM Radio........................................11 Warnings and Precautions........................13 Your Phone The following figure shows the appearance of your phone and it is for your reference only. 1 Screen 8 # key 2 Navigation key 9 Reset key 3 Left soft key 10 End/Power key 4 Call/Answer key 11 Right soft key 5 Charger /Headset jack 12 OK key 6 Number keys 13 Earpiece 7 * key 1 Keys and Functions Press... To... z Make a call. z Answer an incoming call. z View the Outgoing call in standby mode. z Power on or off the phone (by pressing and holding it more than 2s). z End a call, or reject an incoming call. z Return to the standby mode. z Display Menu in standby mode. z Execute functions that the left-down corner indicator shows. z Display Contacts in standby mode. z Return to the previous menu. z Execute functions that the right-down corner indicator shows. 2 Press... To... z Access: Inbox ( ), SIM Phonebook ( ), Call Records ( ), and Alarm ( ) in standby mode. z During a call, increase the volume ( ) or decrease the volume ( ). - z Enter numbers and letters. z Call the voice mail center in standby mode (by pressing and holding the 1 key more than 2s). z Speed-dial phone numbers in standby mode (by pressing and holding the 2-9 ke ys more than 2s). z In standby mode, press the key once to enter *, press the key twice to enter +. press the key thrice to enter P. z In standby mode, press the key more than 2s to set the conference as current profile. z Display the symbol list in any input mode. 3 Press... To... z Enter #. z Lock the keypad in standby mode (by pressing and holding the key more than 2s). z Change input modes when editing texts. z Turn off your phone when it go wrong. If the phone cannot be powered on after you press and hold , the reason is probably that the batter y is used up. In this case, charge the phone for five minutes (during this period, the chargin g animation ma y be not displayed on the screen) and power it on again. Screen Icons Icon Description Signal strength. A new text message is received. The keypad is locked. Battery charge level. 4 An alarm is activated. The Conference profile is activated. Coming call(s). Installing the SIM Card Before installing the SIM card, ensure that your phone is powered off. Ensure that the golden contact area on the SIM card is facing upward, and the beveled corner is properly aligned with the SIM card slot. Removing the SIM Card Before removing the SIM card, ensure that your phone is powered off. 5 Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the charger jack on the phone. 3. Wait until the battery is completely charged. During the charging, the charging icon is displaying in animation. When the charging icon becomes static, the battery is fully charged. 4. Disconnect the charger from the phone. 5. Disconnect the charger from the AC power socket. Using the Function Menu 1. In standby mode, press (Menu ). 2. Press to select the desired function menu. 3. Press (OK) to display the selected menu. 4. Press to scroll to select a submenu . 5. Press (OK) to display the menu. 6 6. Press (Cancel ) to return to the previous menu or exit the function menu. To return to the standby mode, press . Creating a phone number 1. In standby mode, enter the phone number. 2. Press (Save ) choose to save to ME or SIM. 3. Press to edit the name and the number. 4. Press (Save ) to save the phone number success. You can also save a phone number through call records, phonebook, and messages. Searching a phone number 1. In standby mode,Press (Contacts). 2. Press (Option ) to choose search phone number. 3. Press (OK）to input the name. 4. Press (OK）to find it. Making a Call 1. In standby mode, enter the phone number. z To make an international call, press the twice to enter the international long distance code. Then enter 7 the country code or region code, area code, and phone number in sequence. z To call an extension, enter the phone number, press the key thrice to insert P, and then enter the extension number. 2. Press to dial the number. 3. Pres…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Huawei Technologies Co.,Ltd Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 City: ......... SHENZHEN ................................................................ Country:.........China ............................................................................ Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: ......GSM Mobile Phone...... Type designation: ......HUAWEI G1101................................................ Trademark: ...... HUAWEI .................. .................................. on our behalf. Date: ...... 2010/10/13.............. City: ...... SHENZHEN .......................... Name: ...... Zhang Xinghai ........................... Function: ......Manager............................... Signature: .......................................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Huawei Technologies Co.,Ltd Date: October 13, 2010 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG1101 ATTESTATION FCC ID: QISG1101 Product: GSM Mobile Phone Model: HUAWEI G1101 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Date: October 13, 2010 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG1101 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description 4 BOM List 5 Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Date: 2010/10/13 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG1101 USB function explanation Part 15B testing is not necessary for this device because the USB port is for power charging only, no data transmission function. End users are not able to connect to PC for data transmission via USB port. Due to above reasons, this device didn’t perform Part 15B testing, and FCC logo shouldn’t be on the label. Your understanding will be highly appreciated. Sincerely, _________________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

HUAWEI G1101 External Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo

HUAWEI G1101 Internal Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo

Report No：109S031R-HP-US-P03V01 Page: 1 of 88 SAR Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G1101 FCC ID : QISG1101 Applicant : HUAWEI TECHNOLOGIES CO.,LTD. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : Sep. 26, 2010 Date of Test : Sep. 26, 2010 ~ Sep. 28, 2010 Issued Date : Sep. 29, 2010 Report No. : 109S031R-HPUS-P03V01 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Report No：109S031R-HP-US-P03V01 Page: 2 of 88 Test Report Certification Issued Date: Sep. 29, 2010 Report No: 109S031R-HP-US-P03V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO.,LTD. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO.,LTD. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 FCC ID : QISG1101 Model No. : HUAWEI G1101 Trade Name : HUAWEI EUT Voltage : DC 3.7V Applicable Standard : FCC OET65 Supplement C June 2001 IEEE Std. 1528-2003, 47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Head: 0.977 W/kg Body: 0.822 W/kg Performed Location : SuZhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Tested By : (Engineering Supervisor: Marlin Chen) Approved By : (Engineering Manager: Dream Cao) Report No：109S031R-HP-US-P03V01 Page: 3 of 88 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No：109S031R-HP-US-P03V01 Page: 4 of 88 TABLE OF CONTENTS Description Page 1. General Information....................................................................................................6 1.1. EUT Description ..................................................................................................6 1.2. Test Environment.................................................................................................6 2. SAR Measurement System........................................................................................7 2.1. DASY5 System Description.................................................................................7 2.1.1. Applications .....................................................................................................8 2.1.2. Area Scans ......................................................................................................8 2.1.3. Zoom Scan (Cube Scan Averaging) ................................................................8 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ...........................................8 2.2. DASY5 E-Field Probe..........................................................................................9 2.2.1. Isotropic E-Field Probe Specification ...............................................................9 2.3. Boundary Detection Unit and Probe Mounting Device ......................................10 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................10 2.5. Robot................................................................................................................. 11 2.6. Light Beam Unit ................................................................................................. 11 2.7. Device Holder ....................................................................................................12 2.8. SAM Twin Phantom...........................................................................................12 3. Tissue Simulating Liquid...........................................................................................13 3.1. The composition of the tissue simulating liquid .................................................13 3.2. Tissue Calibration Result...................................................................................14 3.3. Tissue Dielectric Parameters for Head and Body Phantoms .............................15 4. SAR Measurement Procedure..................................................................................16 4.1. SAR System Validation......................................................................................16 4.1.1. Validation Dipoles ..........................................................................................16 4.1.2. Validation Result ..............................................................…

Text truncated - open the document above for the full version.

FCC Part22H&24E Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G1101 FCC ID : QISG1101 Applicant : HUAWEI TECHNOLOGIES CO.,LTD. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : Sep. 26, 2010 Test Date : Sep. 26, 2010 ~ Sep. 30, 2010 Issued Date : Sep. 30, 2010 Report No. : 109S031R-HP-US-P07V01 Report Version : V 1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 109S031R-HP-US-P07V01 Page: 2 of 38 Test Report Certification Issued Date : Sep. 30, 2010 Report No. : 109S031R-HP-US-P07V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO.,LTD. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO.,LTD. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI G1101 EUT Voltage : DC:3.7V Trade Name : HUAWEI Applicable Standard : FCC CFR Title 47 Part 2,TIA/EIA 603-C FCC Part22 Subpart H, FCC Part24 Subpart E Test Result : Complied Performed Location : SuZhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : ( Engineering ADM: Alice Ni ) Reviewed By : ( Engineering Supervisor: Marlin Chen ) Approved By : ( Engineering Manager: Dream Cao ) Report No： 109S031R-HP-US-P07V01 Page: 3 of 38 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. : BSMI, NCC, TAF Germany : TUV Rheinland Norway : Nemko, DNV USA : FCC, NVLAP Japan : VCCI Report No： 109S031R-HP-US-P07V01 Page: 4 of 38 TABLE OF CONTENTS Description Page 1. General Information ...................................................................................................... 6 1.1. EUT Description ........................................................................................................ 6 1.2. Mode of Operation .................................................................................................... 7 1.3. Tested System Details .............................................................................................. 8 1.4. Configuration of Tested System................................................................................ 9 1.5. EUT Exercise Software ........................................................................................... 10 2. Technical Test ............................................................................................................. 11 2.1. Summary of Test Result .......................................................................................... 11 2.2. Test Environment .................................................................................................... 12 3. Peak Output Power..................................................................................................... 13 3.1. Test Equipment .......................................................................................................13 3.2. Test Setup ............................................................................................................... 14 3.3. Limit ........................................................................................................................ 14 3.4. Test Procedure ........................................................................................................ 15 3.5. Uncertainty .............................................................................................................. 16 3.6. Test Result.............................................................................................................. 17 4. Occupied Bandwidth................................................................................................... 19 4.1. Test Equipment .......................................................................................................19 4.2. Test Setup ............................................................................................................... 19 4.3. Limit ........................................................................................................................ 20 4.4. Test Procedure .........................…

Text truncated - open the document above for the full version.

GSM Mobile Phone (M/N: HUAWEI G1101) Test Setup Photographs for FCC 22&24 Description: ERP Test Setup Page: 6of 6 Description: Substitution Antenna for ERP Test Description: EIRP Test Setup Page: 6of 6 Description: Substitution Antenna for EIRP Test Description: Radiated Spurious Emission Test Setup for Below 1 GHz Page: 6of 6 Description: Substitution Antenna Test Setup for Below 1 GHz Description: Radiated Spurious Emission Test Setup for Above 1 GHz Page: 6of 6 Description: Substitution Antenna Test Setup for Above 1 GHz Page: 6of 6 SAR Test Setup Photographs & EUT Photographs Test Setup Photographs Left-Cheek Touch Left-Tilt 15° Page: 6of 6 Right-Cheek Touch Right-Tilt 15° Page: 6of 6 Body SAR Front 15mm with Headset Body SAR Back 15mm with Headset Page: 6of 6 Body SAR Back 15mm without Headset Page: 6of 6 Depth of the liquid in the phantom – Zoom in Note: The position used in the measurements were according to IEEE 1528 - 2003 Page: 6of 6