QISG2200CGSM Mobile Phone

G2200C GSM Mobile Phone User Guide Huawei Technologies Co., Ltd. Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Te l: +86-755-28780808 Global Hotline: +86-755-28560808 E-mail: [email protected] Website: www.huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Table of Contents 1 Getting to Know Your Phone ....................................................1 Your Phone ..........................................................................1 SIM Card..............................................................................2 Charging the Battery ............................................................2 Keys.....................................................................................3 Screen Icons.........................................................................4 2 Getting Started ........................................................................5 Phone Lock ..........................................................................5 PIN and PUK ........................................................................6 WAP ....................................................................................6 Keypad Lock.........................................................................6 3 Call Functions ..........................................................................7 Making a Call .......................................................................7 Answering a Call ..................................................................7 Rejecting/Ending a Call .........................................................7 4 Text Entry.................................................................................8 Changing the Text Input Mode .............................................8 Entering an English Word .....................................................8 Entering a Digit ....................................................................9 Entering a Symbol ................................................................9 5 Messaging ...............................................................................9 Writing and Sending a Text Message ....................................9 Writing and Sending a Multimedia Message .......................10 6 Radio ....................................................................................10 7 Warnings and Precautions.......................................................12 1 1 Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and it is for your reference only. 1 Earpiece/Speaker 3Charger jack 2 Headset jack 4Microphone 2 SIM Card Insert your SIM card before using your phone. Remove the SIM card and the battery only after powering off your phone. The following figures show the installation of the SIM card. 1. Insert the SIM card. 3. Install the battery cover. 2. Insert the battery. Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the charger jack on the phone. 3. Wait until the battery is completely charged. During the charging, the charging icon is displaying in animation. When the charging icon becomes static, the battery is fully charged. 4. Disconnect the charger from the phone. 5. Disconnect the charger from the AC power socket. 3 Keys z In this manual, the navigation keys of your phone are indicated by the follow icons: , , , . z To customize the four navigation keys as the shortcuts to different functions, select Menu > Settings > Shortcut Settings. Press ... To ... z Make a call. z Answer an incoming call. z View call logs in standby mode. z Power on or off the phone (by pressing and holding the key for about 5s). z End or reject a call. z Return to the stan…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: Compliance Certification Services Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2009-12-24 To whom it may concern: We the undersigned, hereby authorize Compliance Certification Services to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Compliance Certification Services on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: Compliance Certification Services Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISG2200C to be kept confidential: 1. Schematic diagram & PCB layout. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Declaration of Letter To whom it may concern: FCC ID: QISG2200C, Model: HUAWEI G2200C This is to advise and officially, that we, HUAWEI TECHNOLOGIES CO., LTD., declare that HUAWEI G2200C supports GSM850/1900MHz Bands. HUAWEI G2200C I/O connect can only support charging. It can’t support USB with PC for data transfer. Sincerely, Zhang Xinghai EMC Laboratory Manager For and Behalf of: Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China 0086-755-89651014

HUAWEI G2200C GSM Mobile Phone SECRET Page1,Total 3 External Photos of HUAWEI G2200C HUAWEI G2200C GSM Mobile Phone SECRET Page2,Total 3 HUAWEI G2200C GSM Mobile Phone SECRET Page3,Total 3

HUAWEI G2200C GSM Mobile Phone SECRET Page1, Total 1 Label_ HUAWEI G2200C

HUAWEI G2200C GSM Mobile Phone SECRET Page1, Total 1 Label Location_ HUAWEI G2200C

HUAWEI G2200C GSM Mobile Phone SECRET Page1,Total 5 Internal Photos of HUAWEI G2200C HUAWEI G2200C GSM Mobile Phone SECRET Page2,Total 5 HUAWEI G2200C GSM Mobile Phone SECRET Page3,Total 5 HUAWEI G2200C GSM Mobile Phone SECRET Page4,Total 5 HUAWEI G2200C GSM Mobile Phone SECRET Page5,Total 5

Report No.: RZA2009-1707 TESTING No. L2264 OET 65 TEST REPORT Product Name GSM Mobile Phone Model HUAWEI G2200C FCC ID QISG2200C Client HUAWEI Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name GSM Mobile Phone Model HUAWEI G2200C FCC ID QISG2200C Report No. RZA2009-1707 Client HUAWEI Technologies Co., Ltd. Manufacturer HUAWEI Technologies Co., Ltd. Reference Standard(s) ANSI/IEEE Std C95.1-1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE 1528–2003: Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head Due to Wireless Communications Devices: Experimental Techniques. OET Bulletin 65 supplement C, published June 2001 including DA 02-1438, published June 2002: Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits. Transition Period for the Phantom Requirements of Supplement C to OET Bulletin 65. IEC 62209-1:2006 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 1: Procedure to determine the Specific Absorption Rate (SAR) for hand-held devices used in close proximity to the ear. (frequency range of 300 MHz to 3 GHz). IEC 62209-2:2008(106/162/CDV): Human exposure to radio frequency fields from handheld and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 2: Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body. ( frequency rang of 30MHz to 6GHz ) Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: December 18 th , 2009 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Wang Lu TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 3of 139 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the test report.........................................................................................................5 1.2. Testing laboratory .................................................................................................................5 1.3. Applicant Information ............................................................................................................6 1.4. Manufacturer Information ......................................................................................................6 1.5. Information of EUT................................................................................................................7 1.6. Test Date ..............................................................................................................................8 2. Operational Conditions during Test ..............................................................................................9 2.1. General description of test procedures .................................................................................9 2.2. GSM Test Configuration ........................................................................................................9 3. SAR Measurements System Configuration ................................................................................ 10 3.1. SAR Measurement Set-up ..................................................................................................10 3.2. DASY4 E-field Probe System ............................................................................................. 11 3.2.1. EX3DV4 Probe Specification ....................................................................................... 11 3.2.2. E-field Probe Calibration ..............................................................................................12 3.3. Other Test Equipment .........................................................................................................12 3.3.1. Device Holder for Transmitters ....................................................................................12 3.3.2. Phantom......................................................................................................................13 3.4. Scanning procedure............................................................................................................13 3.5. Data Storage and Evaluation ..............................................................................................15 3.5.1. Data Storage................................................................................................................15 3.5.2. Data Evaluation by SEMCAD ......................................................................................15 3.6. System check......................................................................................................................18 3.7. Equivalent Tissues ..............................................................................................................19 4. Laboratory Environment............................................................................................................. 20 5. Characteristics of the Test .......................................................................................................... 20 5.1. Applicable Limit Regulations ...............................................................................................20 5.2. Applicable Measurement Standards...................................................................................20 6. Conducted Output Power Measurement...…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 61of 139 GSM 850+GPRS(2Up) Towards Ground High Date/Time: 12/17/2009 9:23:25 AM Communication System: GSM850 + GPRS(2Up); Frequency: 848.8 MHz;Duty Cycle: 1:4.15 Medium parameters used: f = 849 MHz; σ = 0.987 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C Phantom section: Flat Section DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn905; Calibrated: 6/24/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Towards Ground High/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.11 mW/g Towards Ground High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.5 V/m; Power Drift = -0.190 dB Peak SAR (extrapolated) = 1.33 W/kg SAR(1 g) = 1 mW/g; SAR(10 g) = 0.714 mW/g Maximum value of SAR (measured) = 1.07 mW/g Figure 37 Body, Towards Ground, GSM 850 GPRS(2Up) Channel 251 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 62of 139 Figure 38 Z-Scan at power reference point (Body, Towards Ground, GSM 850 GPRS(2Up) Channel 251) TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 63of 139 GSM 850+GPRS(2Up) Towards Ground Middle Date/Time: 12/17/2009 9:27:09 PM Communication System: GSM850 + GPRS(2Up); Frequency: 836.6 MHz;Duty Cycle: 1:4.15 Medium parameters used: f = 837 MHz; σ = 0.976 mho/m; ε r = 54.2; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C Phantom section: Flat Section DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn905; Calibrated: 6/24/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Towards Ground Middle/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.764 mW/g Towards Ground Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.8 V/m; Power Drift = -0.049 dB Peak SAR (extrapolated) = 0.950 W/kg SAR(1 g) = 0.713 mW/g; SAR(10 g) = 0.507 mW/g Maximum value of SAR (measured) = 0.756 mW/g Figure 39 Body, Towards Ground, GSM 850 GPRS(2Up) Channel 190 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 64of 139 Figure 40 Z-Scan at power reference point (Body, Towards Ground, GSM 850 GPRS(2Up) Channel 190) TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 65of 139 GSM 850+GPRS(2Up) Towards Ground Low Date/Time: 12/17/2009 12:59:18 PM Communication System: GSM850 + GPRS(2Up); Frequency: 824.2 MHz;Duty Cycle: 1:4.15 Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.959 mho/m; ε r = 54.3; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C Phantom section: Flat Section DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn905; Calibrated: 6/24/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Towards Ground Low/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.478 mW/g Towards Ground Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.1 V/m; Power Drift = 0.032 dB Peak SAR (extrapolated) = 0.592 W/kg SAR(1 g) = 0.439 mW/g; SAR(10 g) = 0.313 mW/g Maximum value of SAR (measured) = 0.466 mW/g Figure 41 Body, Towards Ground, GSM 850 GPRS(2Up) Channel 128 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 66of 139 Figure 42 Z-Scan at power reference point (Body, Towards Ground, GSM 850 GPRS(2Up) Channel 128) TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 67of 139 GSM 850+GPRS(2Up) Towards Phantom Middle Date/Time: 12/17/2009 9:08:08 PM Communication System: GSM850 + GPRS(2Up); Frequency: 836.6 MHz;Duty Cycle: 1:4.15 Medium parameters used: f = 837 MHz; σ = 0.976 mho/m; ε r = 54.2; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C Phantom section: Flat Section DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn905; Calibrated: 6/24/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Towards Phantom Middle/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.757 mW/g Towards Phantom Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.3 V/m; Power Drift = -0.187 dB Peak SAR (extrapolated) = 0.908 W/kg SAR(1 g) = 0.688 mW/g; SAR(10 g) = 0.492 mW/g Maximum value of SAR (measured) = 0.730 mW/g Figure 43 Body, Towards Phantom, GSM 850 GPRS(2Up) Channel 190 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 68of 139 Figure 44 Z-Scan at power reference point (Body, Towards Phantom, GSM 850 GPRS(2Up) Channel 190) TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 69of 139 GSM 1900 Left Cheek High Date/Time: 12/16/2009 11:38:55 AM Communication System: PCS 1900; Frequency: 1909.8 MHz;Duty Cycle: 1:8.3 Medium parameters used: f = 1910 MHz; σ = 1.43 mho/m; ε r = 39.6; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C Phantom section: Left Section DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(7.53, 7.53, 7.53); Calibrated: 9/23/2009 Electronics: DAE4 Sn905; Calibrated: 6/24/2009 Phantom: SAM000 T01 ; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek High/Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum valu…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 111of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 112of 139 ANNEX E: D835V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 113of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 114of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 115of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 116of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 117of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 118of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 119of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 120of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 121of 139 ANNEX F: D1900V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 122of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 123of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 124of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 125of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 126of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 127of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 128of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 129of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 130of 139 ANNEX G: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 131of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 132of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 133of 139 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RZA2009-1707 Page 134of 139

FCC Test Report Product Name: GSM Mobile Phone Model Number: HUAWEI G2200C Report No: SYBHZ(R)E007122009EB-1 FCC ID: QISG2200C Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI G2200C FCC ID: QISG2200C Security Level: Public Report No: SYBHZ(R)E007122009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI G2200C FCC ID: QISG2200C Security Level: Public Report No: SYBHZ(R)E007122009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total37 REPORT ON FCC Test of Huawei GSM Mobile Phone M/N: HUAWEI G2200C Report No: SYBHZ(R)E007122009EB-1 FCC ID: QISG2200C REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION PASS General Manager 2009.12.14 Date Name signature Test Lab Engineer 2009.12.09 Date Name signature FCC Test Report of HUAWEI G2200C FCC ID: QISG2200C Security Level: Public Report No: SYBHZ(R)E007122009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total37 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST....................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..................................................................................................................... 12 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................... 12 6.2 CONDUCTED OUTPUT POWER............................................................................................................... 15 6.3 MODULATION CHARACTERISTICS.......................................................................................................... 17 6.4 OCCUPIED BANDWIDTH........................................................................................................................ 19 6.5 BAND EDGES COMPLIANCE.................................................................................................................. 21 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 23 6.7 RADIATED SPURIOUS EMISSIONS.......................................................................................................... 25 6.8 FREQUENCY STABILITY........................................................................................................................ 29 7 EMC Test.................................................................................................................................................. 32 7.1 CONDUCTED EMISSION AT POWER PORT.............................................................................................. 32 …

Text truncated - open the document above for the full version.

FCC Test Report of HUAWEI G2200C FCC ID: QISG2200C Security Level: Public Report No: SYBHZ(R) E007122009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total2 Appendix A Modulation Characteristics According to FCC Part 2.1047 & Part22 Subpart H FCC Test Report of HUAWEI G2200C FCC ID: QISG2200C Security Level: Public Report No: SYBHZ(R)E007122009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total2…

Text truncated - open the document above for the full version.