QISG2201GSM Mobile Phone

G2201 GSM Mobile Phone User Guide Huawei Technologies Co., Ltd. Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: +86-755-28780808 Global Hotline: +86-755-28560808 E-mail: [email protected] Website: www.huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, products, services, and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Table of Contents SIM Card ...................................................... 1 Charging the Battery ...................................... 1 Your Phone.................................................... 2 Keys and Functions ........................................ 3 Screen Icons ................................................. 5 Using the Function Menu................................. 6 Phone Lock ................................................... 6 PIN and PUK.................................................. 7 Locking the Keypad ........................................ 7 Making a Call................................................. 7 Answering a Call ............................................ 8 Text Input Modes ........................................... 9 Writing and Sending a Message ..................... 11 Creating a Contact ....................................... 11 FM Radio..................................................... 12 Warnings and Precautions ............................. 13 1 SIM Card Insert your SIM card before using your phone. Remove the SIM card and the battery only after powering off your phone. The following figures show the installation of the SIM card. 1. Remove the battery cover. 3. Insert the battery. 2. Insert the SIM card. Charging the Battery 1. Connect the charger to an AC power socket. 2. Connect the charger to the charger jack on the phone. 3. Wait until the battery is completely charged. During the charging, the charging icon is displaying in animation. When the charging icon becomes static, the battery is fully charged. 2 4. Disconnect the charger from the phone. 5. Disconnect the charger from the AC power socket. Your Phone The following figure shows the appearance of your phone and it is for your reference only. 1 Earpiece 8 # key 2 Screen 9 End/Power key 3 Navigation keys 10 Right soft key 4 Left soft key 11 Confirm key 3 5 Call/Answer key 12 Charger jack 6 Number keys 13 Headset jack 7 * key Keys and Functions In this manual, the navigation keys of your phone are indicated by the follow icons: , , , , and . Press... To... z Make a call. z Answer an incoming call. z View dialed calls in standby mode. z Power on or off the phone (by pressing and holding the key for about 5s). z End a call, or reject an incoming call. z Return to the standby mode. z Display Menu in standby mode. z Select the highlighted item. z Display Contacts in standby mode. z Return to the previous menu. 4 Press... To... z Access: Profiles ( ), Messages ( ), Create Message ( ), and Alarm Clock ( ) in standby mode. z During a call, increase the volume ( ) or decrease the volume ( ). z Display Menu in standby mode. z Confirm a selection. – z Enter numbers, letters, and characters. z Call the voice mail center in standby mode (by pressing and holding the 1 key for about 3s). z Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys for about 3s). z In standby mode, press the key once to enter *. z Enable or disable the Silent profile in standby mode (by pressing and holding the key for about 3s). z Display the symbol list in any input mode. 5 Press... To... z Enter #. z Lock the keypad in standby mode (by pressing and holding it for about 3s). z Change text input modes when editing texts. Screen Icons Icon Indicates Signal strength. New text message(s). The SMS memory is full when the icon is blinking. New voice message(s). The earphone is plugged. The pho…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Declaration of Letter To whom it may concern: FCC ID: QISG2201, Model: HUAWEI G2201 This is to advise and officially, that we, HUAWEI TECHNOLOGIES CO., LTD., declare that HUAWEI G2201 supports GSM850/1900MHz Bands. HUAWEI G2201 I/O connect can only support charging. It can’t support USB with PC for data transfer. Sincerely, Zhang Xinghai EMC Laboratory Manager For and Behalf of: Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China 0086-755-89651014

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISG2201 to be kept confidential: 1. Schematic diagram。 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI G2201 GSM Mobile Phone SECRET Page1,Total 3 External Photo of HUAWEI G2201 HUAWEI G2201 GSM Mobile Phone SECRET Page2,Total 3 HUAWEI G2201 GSM Mobile Phone SECRET Page3,Total 3

HUAWEI G2201 GSM Mobile Phone SECRET Page1, Total 1 Label Location_ HUAWEI G2201

HUAWEI G2201 GSM Mobile Phone SECRET Page1, Total 1 Label_ HUAWEI G2201

HUAWEI G2201 GSM Mobile Phone SECRET Page1,Total 6 Internal Photo of HUAWEI G2201 HUAWEI G2201 GSM Mobile Phone SECRET Page2,Total 6 HUAWEI G2201 GSM Mobile Phone SECRET Page3,Total 6 HUAWEI G2201 GSM Mobile Phone SECRET Page4,Total 6 HUAWEI G2201 GSM Mobile Phone SECRET Page5,Total 6 HUAWEI G2201 GSM Mobile Phone SECRET Page6,Total 6

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785278 SAR-Laboratory Fax: +86-755-36834474 . Accredited testing laboratory CNAS Registration number: L0310 Report On SAR Test of HUAWEI GSM Mobile Phone M/N: HUAWEI G2201 Test report no. : SYBH(Z-SAR) 202122009 Type identification : HUAWEI G2201 FCC-ID : QISG2201 Test specification : IEEE 1528-2003 : ANSI C95.1-1999 : OET Bulletin 65 Supplement C : IEC 62209-2:2008(106/162/CDV) Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR) 202122009 As of 2009-12-03 Page 2 of 80 Table of Contents 1 General Information............................................................................................................................................................... 3 1.1 Notes ............................................................................................................................................................................. 3 1.1.1 Statement of Compliance .......................................................................................................................................... 3 1.2 Testing laboratory ......................................................................................................................................................... 4 1.3 Details of applicant ....................................................................................................................................................... 4 1.4 Application details ........................................................................................................................................................ 4 1.5 Test item ....................................................................................................................................................................... 5 1.5.1 Additional Information ............................................................................................................................................. 5 1.6 Test specification(s) ...................................................................................................................................................... 6 1.6.1 RF exposure limits .................................................................................................................................................... 6 2 Technical test ......................................................................................................................................................................... 8 2.1 Summary of test results................................................................................................................................................. 8 2.2 Test environment .......................................................................................................................................................... 8 2.3 Measurement and test set-up......................................................................................................................................... 8 2.4 Measurement system..................................................................................................................................................... 9 2.4.1 System Description ................................................................................................................................................... 9 2.4.2 Test environment .................................................................................................................................................... 10 2.4.3 Probe description .................................................................................................................................................... 10 2.4.4 Phantom description ............................................................................................................................................... 12 2.4.5 Device holder description ....................................................................................................................................... 12 2.4.6 Scanning procedure................................................................................................................................................. 13 2.4.7 Spatial Peak SAR Evaluation.................................................................................................................................. 14 2.4.8 Data Storage and Evaluation................................................................................................................................... 15 2.4.9 Test equipment utilized........................................................................................................................................... 17 2.4.10 Tissue simulating liquids: dielectric properties .................................................................................................. 18 2.4.11 Tissue simulating liquids: parameters................................................................................................................. 19 2.4.12 Measurement uncertainty evaluation for SAR test ............................................................................................. 20 2.4.13 Measurement uncertainty evaluation for system validation................................................................................ 21 2.4.14 System validation ............................................................................................................................................... 22 2.4.15 Validation procedure .......................................................................................................................................... 23 2.5 Test Results ................................................................................................................................................................. 24 2.5.1 Conducted power measu…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785278 SAR-Laboratory Fax: +86-755-36834474 . Page 1 of 35 Accredited testing laboratory CNAS Registration number: L0310 Appendix to test report no. SYBH(Z-SAR)202122009 Calibration data, Phantom certificate and detail information of the DASY5 System Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 2 of 35 Table of Content 1 Calibration report “Probe ES3DV3” .................................................................................................................................... 3 2 Calibration report “1900 MHz System validation dipole” ................................................................................................. 11 3 Calibration report “835 MHz System validation dipole” ................................................................................................... 18 4 Calibration certificate of Data Acquisition Unit (DAE)..................................................................................................... 25 5 Application Note System Performance Check ................................................................................................................... 30 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 3 of 35 1 Calibration report “Probe ES3DV3” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 4 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 5 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 6 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 7 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 8 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 9 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 10 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 11 of 35 2 Calibration report “1900 MHz System validation dipole” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 12 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 13 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 14 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 15 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 16 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 17 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 18 of 35 3 Calibration report “835 MHz System validation dipole” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 19 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 20 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 21 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 22 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 23 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 24 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 25 of 35 4 Calibration certificate of Data Acquisition Unit (DAE) Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 26 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 27 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 28 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 29 of 35 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)126092009 As of 2009-09-17 Page 30 of 35 5 Application Note System Performance Check 5.1.1.1 Purpose of system performance check The system performance check verifies that the system operates within its specifications. System and operator errors can be detected and corrected. It is recommended that the system performance check is performed prior to any usage of the system in order to guarantee reproducible results. The measurement of the Specific Absorption Rate (SAR) is a complicated task and the result depends on the proper functi…

Text truncated - open the document above for the full version.

Zur optimalen Anzeige dieses PDF-Portfolios sollte es in Acrobat oder Adobe Reader ab Version 9 geöffnet werden. Adobe Reader jetzt herunterladen

FCC Test Report Product Name: GSM Mobile Phone Model Number: HUAWEI G2201 Report No: SYBHZ(R)E045112009EB-1 FCC ID: QISG2201 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI G2201 FCC ID: QISG2201 Security Level: Public Report No: SYBHZ(R)E045112009EB-1 Confidential Information of Huawei. No Distribution without Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI G2201 FCC ID: QISG2201 Security Level: Public Report No: SYBHZ(R)E045112009EB-1 Confidential Information of Huawei. No Distribution without Permission Page3, Total37 REPORT ON FCC Test of Huawei GSM Mobile Phone M/N: HUAWEI G2201 Report No: SYBHZ(R)E045112009EB-1 FCC ID: QISG2201 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 15: Subpart B; CONCLUSION PASS General Manager 2009.12.04 Date Name signature Technical Responsibility For Area of Testing 2009.12.01 余 辉 Date Name signature Test Lab Engineer 2009.11.27 Date Name signature FCC Test Report of HUAWEI G2201 FCC ID: QISG2201 Security Level: Public Report No: SYBHZ(R)E045112009EB-1 Confidential Information of Huawei. No Distribution without Permission Page4, Total37 Contents 1 Summary..............................................................................................................................................5 2 Product Description...........................................................................................................................6 2.1 PRODUCTION INFORMATION...............................................................................................................6 2.2 MODIFICATION INFORMATION.............................................................................................................6 3 Test Site Description............................................................................................................................7 3.1 TESTING PERIOD..............................................................................................................................7 3.2 GENERAL SET UP DESCRIPTION.........................................................................................................7 4 Product Description .............................................................................................................................8 4.1 TECHNICAL CHARACTERISTICS...........................................................................................................8 4.2 EUT IDENTIFICATION LIST.....................................................................................................................9 5 Main Test Instruments..........................................................................................................................9 6 Transmitter Measurements...................................................................................................................9 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)........................................................................9 6.2 CONDUCTED OUTPUT POWER............................................................................................................9 6.3 MODULATION CHARACTERISTICS........................................................................................................9 6.4 OCCUPIED BANDWIDTH.....................................................................................................................9 6.5 BAND EDGES COMPLIANCE................................................................................................................9 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL.......................................................................................9 6.7 RADIATED SPURIOUS RADIATION........................................................................................................9 6.8 FREQUENCY STABILITY.....................................................................................................................9 7 EMC Test ..............................................................................................................................................9 7.1 CONDUCTED EMISSION AT POWER PORT............................................................................................9 7.2 RADIATED EMISSION OF ENCLOSURE IN IDLE MODE............…

Text truncated - open the document above for the full version.

Zur optimalen Anzeige dieses PDF-Portfolios sollte es in Acrobat oder Adobe Reader ab Version 9 geöffnet werden. Adobe Reader jetzt herunterladen

FCC Test Report Product Name: GSM Mobile Phone Model Number: HUAWEI G2201 Report No: SYBHZ(R)E045112009EB-2 FCC ID: QISG2201 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI G2201 FCC ID: QISG2201 Security Level: Public Report No: SYBHZ(R)E045112009EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total37 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI G2201 FCC ID: QISG2201 Security Level: Public Report No: SYBHZ(R)E045112009EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total37 REPORT ON FCC Test of HUAWEI GSM Mobile Phone M/N: HUAWEI G2201 Report No: SYBHZ(R)E045112009EB-2 FCC ID: QISG2201 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; FCC CFR47 Part 15: Subpart B; CONCLUSION PASS General Manager 2009.12.04 Date Name signature Technical Responsibility For Area of Testing 2009.12.01 余 辉 Date Name signature Test Lab Engineer 2009.11.27 Date Name signature FCC Test Report of HUAWEI G2201 FCC ID: QISG2201 Security Level: Public Report No: SYBHZ(R)E045112009EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total37 Contents 1 Summary..............................................................................................................................................5 2 Product Description.............................................................................................................................6 2.1 PRODUCTION INFORMATION...............................................................................................................6 2.2 MODIFICATION INFORMAT…

Text truncated - open the document above for the full version.