QISG2800GSM Mobile Phone

Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. i Table of Contents 1 Getting to Know Your Phone ................................................1 Your Phone ........................................................................................... 1 Keys and Functions ........................................................................... 2 Screen Icons ......................................................................................... 4 2 Getting Started .......................................................................4 Installing the SIM Card and the Battery................................... 5 Removing the Battery and the SIM Card................................. 5 Installing the microSD Card .......................................................... 6 Charging the Battery........................................................................ 6 Using the Function Menu .............................................................. 6 Phone Lock ........................................................................................... 7 PIN and PUK ........................................................................................ 7 Locking the Keypad .......................................................................... 8 File Management............................................................................... 8 3 Call Function ...........................................................................9 Making a Call....................................................................................... 9 Answering a Call...............................................................................10 4 Text Input ............................................................................. 10 Changing the Text Input Mode..................................................10 Entering an English Letter ............................................................11 Entering a Digit.................................................................................12 ii Entering a Symbol ...........................................................................12 5 Messages .............................................................................. 13 Writing and Sending a Text Message .....................................13 Writing and Sending a Multimedia Message ......................13 6 Contacts ................................................................................ 15 Creating a New Contact................................................................15 Searching for a Contact ................................................................15 7 Multimedia ........................................................................... 16 Image Album .....................................................................................16 Audio Player.......................................................................................16 Video Player.......................................................................................17 FM Radio (Optional) .......................................................................17 Sound Recorder................................................................................18 8 WAP....................................................................................... 18 Network Settings .............................................................................19 Connecting to a Network.............................................................19 9 Warnings and Precautions ................................................. 20 1 Features marked with "optional" are optional. These features may vary according to service providers. For details, contact your service provider. 1 Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and it is provided for your reference only. 1 Earpiece 7 Torch 2 Screen 8 Number keys 2 3 Navigation keys 9 End/Power key 4 Left soft key 10Right soft key 5 Call/Answer key 11Confirm key 6 Microphone Keys and Functions Press ... To ... z Make a call. z Answer an incoming call. z View All calls in standby mode. z Power on or power off the phone (by pressing and holding it for about 3s). z End a call or reject an incoming call. z Return to the standby mode. z Access the main menu in standby mode. z Select the option displayed in the lower left corner of the screen. z Access Contact list in standby mode. z Select the option displayed in the lower right corner of the screen. z Access the main menu in standby mode. z Confirm a selection. 3 Press ... To ... z Access Calendar(),Alarm (),User profiles ( ), and Write message () in standby mode. z During a call, increase the volume () or decrease the volume ( ). – z Enter numbers, letters, and characters. z Call the voice mail center in standby mode (by pressing and holding the 1 key for about 3s). z Speed-dial phone numbers in standby mode (by pressing and holding the 2–9 keys for about 3s). z Select a submenu item labeled with the corresponding number. z In standby mode, press the key once to enter *, twice to enter +, three times to enter P, and four times to enter W. z Display the…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date: August 09, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG2800 ATTESTATION FCC ID: QISG2800 Product: GSM Mobile Phone Model: HUAWEI G2800 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

RF_160, Issue 02 Huawei Technologies Co.,Ltd Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 City:  SHENZHEN . Country:China . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: GSM Mobile Phone Type designation:  HUAWEI G2800  on our behalf. Date:  2011/08/09.. City:  SHENZHEN .. Name:  Zhang Xinghai .. (2) Function: ......Manager............................... Signature:  Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Huawei Technologies Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISG2800 to be kept confidential: 1. Schematic diagram . 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen China Attestation for FCC Declaration of Conformity FCC ID: QISG2800 Date: 2011/08/01 Please be notified that we, the undersigned, Huawei Technologies Co.,Ltd declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DOC. The test report number supporting the DOC is 118144R-ITUSP01V02 Testing in regards to this report was done by QuieTek Corp., located at No.5-22, Rueishu Keng, Rueiping Tsuen, Linkou Shiang, Taipei County 244, Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Date: 2011/08/15 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG2800 USB function explanation The USB port in our device can support power charging and data transmission function. Your understanding will be highly appreciated. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

1. Attachment ¾ EUT Photograph (1) EUT Photo (2) EUT Photo Report No.: 117S102R-HP-US-P07V01 Page: 2 of 6 (3) EUT Photo (4) EUT Photo Report No.: 117S102R-HP-US-P07V01 Page: 3 of 6 (5) EUT Photo (6) EUT Photo Report No.: 117S102R-HP-US-P07V01 Page: 4 of 6 (7) EUT Photo (Adapter #1) (8) EUT Photo (Adapter #1) Report No.: 117S102R-HP-US-P07V01 Page: 5 of 6 (9) EUT Photo (Adapter #2) (10) EUT Photo (Adapter #2) Report No.: 117S102R-HP-US-P07V01 Page: 6 of 6

(1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo

Report No.: 117S102R-HP-US-P03V01 Page: 1 of 101 SAR Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G2800 FCC ID : QISG2800 Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 30/07/2011 Date of Test : 04/08/2011 Issued Date : 06/08/2011 Report No. : 117S102R-HP-US-P03V01 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Report No.: 117S102R-HP-US-P03V01 Page: 2 of 101 Test Report Certification Issued Date: 06/08/2011 Report No: 117S102R-HP-US-P03V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI G2800 FCC ID : QISG2800 Brand Name : HUAWEI EUT Voltage : DC 3.7V Applicable Standard : FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Head: 0.928 W/kg Body: 1.060 W/kg Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No.: 117S102R-HP-US-P03V01 Page: 3 of 101 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 117S102R-HP-US-P03V01 Page: 4 of 101 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................6 1.1. EUT Description ..................................................................................................6 1.2. Test Environment.................................................................................................8 2. SAR Measurement System ......................................................................................9 2.1. DASY5 System Description.................................................................................9 2.1.1. Applications ...................................................................................................10 2.1.2. Area Scans ....................................................................................................10 2.1.3. Zoom Scan (Cube Scan Averaging) ..............................................................10 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging .........................................10 2.2. DASY5 E-Field Probe........................................................................................ 11 2.2.1. Isotropic E-Field Probe Specification ............................................................. 11 2.3. Boundary Detection Unit and Probe Mounting Device ......................................12 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................12 2.5. Robot.................................................................................................................13 2.6. Light Beam Unit .................................................................................................13 2.7. Device Holder ....................................................................................................14 2.8. SAM Twin Phantom...........................................................................................14 3. Tissue Simulating Liquid .......................................................................................15 3.1. The composition of the tissue simulating liquid .................................................15 3.2. Tissue Calibration Result...................................................................................16 3.3. Tissue Dielectric Parameters for Head and Body Phantoms .............................17 4. SAR Measurement Procedure ...............................................................................18 4.1. SAR System Validation......................................................................................18 4.1.1. Validation Dipoles ..........................................................................................18 4.1.2. Validation Result ............................................................................................19 …

Text truncated - open the document above for the full version.

FCC Part22H&24E Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G2800 FCC ID : QISG2800 Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 30/07/2011 Test Date : 30/07/2011~07/08/2011 Issued Date : 08/08/2011 Report No. : 117S102R-HP-US-P07V01 Report Version : V 1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 117S102R-HP-US-P07V01 Page: 2 of 53 Test Report Certification Issued Date : 08/08/2011 Report No. : 117S102R-HP-US-P07V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI G2800 FCC ID : QISG2800 EUT Voltage : DC 3.7V Brand Name : HUAWEI Applicable Standard : FCC CFR Title 47 Part 2,TIA/EIA 603-C FCC Part22 Subpart H, FCC Part24 Subpart E Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No.: 117S102R-HP-US-P07V01 Page: 3 of 53 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3 rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 117S102R-HP-US-P07V01 Page: 4 of 53 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................... 6 1.1. EUT Description ......................................................................................................... 6 1.2. Mode of Operation...................................................................................................... 7 1.3. Tested System Details ................................................................................................ 8 1.4. Configuration of Tested System .................................................................................. 9 1.5. EUT Exercise Software............................................................................................. 10 2. Technical Test ........................................................................................................... 11 2.1. Summary of Test Result............................................................................................ 11 2.2. Test Environment...................................................................................................... 12 3. Peak Output Power .................................................................................................. 13 3.1. Test Equipment......................................................................................................... 13 3.2. Test Setup................................................................................................................. 14 3.3. Limit ..........................................................................................................................14 3.4. Test Procedure......................................................................................................... 14 3.5. Uncertainty ............................................................................................................... 16 3.6. Test Result................................................................................................................ 17 3.7. Test Photograph....................................................................................................... 21 4. Occupied Bandwidth................................................................................................. 23 4.1. Test Equipment......................................................................................................... 23 4.2. Test Setup................................................................................................................. 23 4.3. Limit .........................................…

Text truncated - open the document above for the full version.

Part 22&24-Test Photograph Description: ERP Test Setup Description: Substitution Antenna for ERP Test Description: EIRP Test Setup Description: Substitution Antenna for EIRP Test Oet65 Supplement C -Test Setup Photographs Test Setup Photographs Left-Cheek Touch Left-Tilt 15° Right-Cheek Touch Right-Tilt 15° Body SAR Back 15mm Body SAR Front 15mm Body SAR Back 15mm with Headset Depth of the liquid in the phantom – Zoom in Note: The position used in the measurements were according to IEEE 1528 - 2003