QISG2800SGSM Mobile Phone

G2800S GSM Mobile Phone User Guide Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd. and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, products, services, and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of the local network, and may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd. reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Table of Contents 1 Getting to Know Your Phone................................................1 Your Phone ........................................................................................... 1 Keys and Functions ........................................................................... 2 Screen Icons ......................................................................................... 4 2 Getting Started .......................................................................5 Installing the SIM Cards and the Battery................................. 5 Installing a microSD Card............................................................... 6 Charging the Battery........................................................................ 6 Phone Lock ........................................................................................... 7 PIN and PUK ........................................................................................ 7 Locking and Unlocking the Keypad ........................................... 7 3 Voice Services .........................................................................8 Making a Call....................................................................................... 8 Answering a Call................................................................................. 9 4 Text Input ............................................................................. 10 Changing the Text Input Mode..................................................10 Entering a Letter...............................................................................11 Entering a Digit.................................................................................11 Entering a Symbol ...........................................................................11 5 Messaging ............................................................................ 11 Sending a Text Message ...............................................................11 ii 6 Phonebook ........................................................................... 12 Creating a Contact ..........................................................................12 Searching for a Contact ................................................................12 7 Audio Player......................................................................... 12 8 FM Radio............................................................................... 13 9 Warnings and Precautions ................................................. 14 1 1 Getting to Know Your Phone Your Phone The following figure shows the appearance of your phone and is provided for your reference only. 9 10 11 12 1 2 3 4 5 6 7 8 2 1 Earpiece 7 Microphone 2 Charger/Headset interface 8 Torch 3 Screen 9 Number keys 4 Navigation keys 10End/Power key 5 Left soft key 11Right soft key 6 Call/Answer key 12Confirm key Keys and Functions Press ... To ... z Make a call. z Answer an incoming call. z View call logs in standby mode. z Power the phone on or off (press and hold the key for about 3 seconds). z End or reject a call. z Return to standby mode. Select the option displayed in the lower left corner of the screen. Select the option displayed in the lower right corner of the screen. z Access the main menu in standby mode. z Confirm a selection. 3 Press ... To ... Access the functions assigned to the navigation keys in standby mode. To customize the functions assigned to the navigation keys, select Menu > Settings > Phone settings >Shortcuts > Dedicated key. – z Enter numbers, letters, and symbols. z Call voicemail in standby mode (press and hold the 1 key for about 3 seconds). z Speed-dial phone n…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date: August 31, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG2800S ATTESTATION FCC ID: QISG2800S Product: GSM Mobile Phone Model: HUAWEI G2800S We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

RF_160, Issue 02 Huawei Technologies Co.,Ltd Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 City: SHENZHEN Country: China Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description: GSM Mobile Phone Type designation: HUAWEI G2800S on our behalf. Date: 2011/08/31 City: SHENZHEN Name: Zhang Xinghai (2) Function: Manager Signature:  Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Huawei Technologies Co.,Ltd Date: August 31, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG2800S Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description 4 BOM List 5 Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Sincerely, _________________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen China Attestation for FCC Declaration of Conformity FCC ID: QISG2800S Date: 2011/08/31 Please be notified that we, the undersigned, Huawei Technologies Co.,Ltd declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DOC. The test report number supporting the DOC is 119021R-ITUSP01V02Testing in regards to this report was done by QuieTek Corp., located at No.5-22, Rueishu Keng, Rueiping Tsuen, Linkou Shiang, Taipei County 244, Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Zhang Xinghai/manager Huawei Technologies Co.,Ltd

Huawei Technologies Co.,Ltd Date: 2011/09/07 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISG2800S USB function explanation The USB port in our device can support power charging and data transmission function. Your understanding will be highly appreciated. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

¾ EUT Photograph (1) EUT Photo (2) EUT Photo Report No.: 118S074R-HP-US-P07V01 Page: 2 of 6 (3) EUT Photo (4) EUT Photo Report No.: 118S074R-HP-US-P07V01 Page: 3 of 6 (5) EUT Photo (6) EUT Photo Report No.: 118S074R-HP-US-P07V01 Page: 4 of 6 (7) EUT Photo (Adapter #1) (8) EUT Photo (Adapter #1) Report No.: 118S074R-HP-US-P07V01 Page: 5 of 6 (9) EUT Photo (Adapter #2) (10) EUT Photo (Adapter #2) Report No.: 118S074R-HP-US-P07V01 Page: 6 of 6

(1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo

Report No.: 118S074R-HP-US-P03V01 Page: 1 of 93 SAR Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G2800S FCC ID : QISG2800S Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 26/08/2011 Date of Test : 30/08/2011 Issued Date : 31/08/2011 Report No. : 118S074R-HP-US-P03V01 Report Version : V1.1 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of Quie Tek Corporation. Report No.: 118S074R-HP-US-P03V01 Page: 2 of 93 Test Report Certification Issued Date: 31/08/2011 Report No.: 118S074R-HP-US-P03V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI G2800S FCC ID : QISG2800S Brand Name : HUAWEI EUT Voltage : DC 3.7V Applicable Standard : FCC Oet65 Supplement C June 2001 IEEE Std. 1528-2003,47CFR § 2.1093 Test Result : Max. SAR Measurement (1g) Head: 0.901 W/kg Body: 0.552 W/kg Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No.: 118S074R-HP-US-P03V01 Page: 3 of 93 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 118S074R-HP-US-P03V01 Page: 4 of 93 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................6 1.1. EUT Description ..................................................................................................6 1.2. Test Environment.................................................................................................8 2. SAR Measurement System ......................................................................................9 2.1. DASY5 System Description.................................................................................9 2.1.1. Applications ...................................................................................................10 2.1.2. Area Scans ....................................................................................................10 2.1.3. Zoom Scan (Cube Scan Averaging) ..............................................................10 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging .........................................10 2.2. DASY5 E-Field Probe........................................................................................ 11 2.2.1. Isotropic E-Field Probe Specification ............................................................. 11 2.3. Boundary Detection Unit and Probe Mounting Device ......................................12 2.4. DATA Acquisition Electronics (DAE) and Measurement Server ........................12 2.5. Robot.................................................................................................................13 2.6. Light Beam Unit .................................................................................................13 2.7. Device Holder ....................................................................................................14 2.8. SAM Twin Phantom...........................................................................................14 3. Tissue Simulating Liquid .......................................................................................15 3.1. The composition of the tissue simulating liquid .................................................15 3.2. Tissue Calibration Result...................................................................................16 3.3. Tissue Dielectric Parameters for Head and Body Phantoms .............................17 4. SAR Measurement Procedure ...............................................................................18 4.1. SAR System Validation......................................................................................18 4.1.1. Validation Dipoles ..........................................................................................18 4.1.2. Validation Result ............................................................................................19…

Text truncated - open the document above for the full version.

FCC Part22H&24E Test Report Product Name : GSM Mobile Phone Model No. : HUAWEI G2800S FCC ID : QISG2800S Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 26/08/2011 Test Date : 29/08/2011~30/08/2011 Issued Date : 31/08/2011 Report No. : 118S074R-HP-US-P07V01 Report Version : V 1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 118S074R-HP-US-P07V01 Page: 2 of 51 Test Report Certification Issued Date : 31/08/2011 Report No. : 118S074R-HP-US-P07V01 Product Name : GSM Mobile Phone Applicant : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : HUAWEI TECHNOLOGIES CO., LTD Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI G2800S FCC ID : QISG2800S EUT Voltage : DC 3.7V Brand Name : HUAWEI Applicable Standard : FCC CFR Title 47 Part 2,TIA/EIA 603-C FCC Part22 Subpart H, FCC Part24 Subpart E Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Senior Engineer: Robin Wu) Approved By : (Engineering Supervisor: Marlin Chen) Report No.: 118S074R-HP-US-P07V01 Page: 3 of 51 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3 rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 118S074R-HP-US-P07V01 Page: 4 of 51 TABLE OF CONTENTS Description Page 1. General Information .................................................................................................... 6 1.1. EUT Description ......................................................................................................... 6 1.2. Mode of Operation...................................................................................................... 7 1.3. Tested System Details ................................................................................................ 8 1.4. Configuration of Tested System .................................................................................. 9 1.5. EUT Exercise Software............................................................................................. 10 2. Technical Test ........................................................................................................... 11 2.1. Summary of Test Result............................................................................................ 11 2.2. Test Environment...................................................................................................... 12 3. Peak Output Power .................................................................................................. 13 3.1. Test Equipment......................................................................................................... 13 3.2. Test Setup................................................................................................................. 14 3.3. Limit ..........................................................................................................................14 3.4. Test Procedure......................................................................................................... 14 3.5. Uncertainty ............................................................................................................... 16 3.6. Test Result................................................................................................................ 17 3.7. Test Photograph....................................................................................................... 19 4. Occupied Bandwidth................................................................................................. 21 4.1. Test Equipment......................................................................................................... 21 4.2. Test Setup................................................................................................................. 21 4.3. Limit .....................................…

Text truncated - open the document above for the full version.