QISMC706CDMA Wireless module

AT Command Manual MC706 Wireless Module V100R001 Issue 01 Date 2009-09-05 HUAWEI TECHNOLOGIES CO., LTD. Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Web site: http://www.huawei.com Email: [email protected] Copyright © Huawei Technologies Co., Ltd. 2008. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. FCC Statement 15.19 NOTICE: This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 NOTICE: Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device. 15.105 NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by connecting or disconnecting the device to a PC, the user is encouraged to try to correct the interference by adopting one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the device and the receiver. Connect the device to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. This device is intended for OEM integrators only. Host system must be labeled with "Contains FCC ID: QISMC706", FCC ID displayed on label. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. HUAWEI MC706 Wireless Module AT Command Manual Contents Contents Chapter 1 Basic AT Parameters ............................................................................................. 1-1 1.1 Command Echo ................................................................................................................. 1-1 1.2 Quiet Results Codes Control ............................................................................................. 1-1 1.3 Result Code Form..............................................................................................................1-2 1.4 Soft Reset .......................................................................................................................... 1-3 1.5 Restore Factory Configuration........................................................................................... 1-4 1.6 DCD Option........................................................................................................................ 1-4 1.7 DTR Option ........................................................................................................................ 1-5 1.8 S-Parameters..................................................................................................................... 1-6 Chapter 2 Extended AT Configuration Commands.................................................................2-1 2.1 Query minimun capability .................................................................................................. 2-1 2.2 Query the manufacturer name........................................................................................... 2-2 2.3 Query Model Number ........................................................................................................ 2-2 2.4 Query minimun capability .................................................................................................. 2-3 2.5 Local Flow Control .............................................................................................................2-4 2.6 Local Rate Reporting. ........................................................................................................ 2-5 2.7 Fixed R M Rate .................................................................................................................... 2-6 Chapter 3 Fax Parameters ..................................................................................................... 3-1 3.1 Service-class Selection...................................................................................................... 3-1 3.2 Pass Unrecognized Commands to the IWF ...................................................................... 3-2 3.3 Query Current Service Type ........................................................................…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2009-10-30 To whom it may concern: We the undersigned, hereby authorize Louis Lin of Jiangsu TÜV Product Service Ltd. – Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jiangsu TÜV Product Service Ltd. – Shenzhen Branch on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: BABT Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISMC706 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Turn-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

HUAWEI MC706 Wireless Module SECRET Photo documentation of interior of product HUAWEI MC706 Wireless Module SECRET HUAWEI MC706 Wireless Module SECRET HUAWEI MC706 Wireless Module SECRET HUAWEI MC706 Wireless Module SECRET

Huawei MC706 Wireless Module SECRET MC706 Page1, Total 1

HUAWEI MC706 Wireless Module SECRET Photo documentation of interior of product HUAWEI MC706 Wireless Module SECRET HUAWEI MC706 Wireless Module SECRET HUAWEI MC706 Wireless Module SECRET HUAWEI MC706 Wireless Module SECRET

HUAWEI MC706 Electromagnetic Radiation Exposure Estimation 1 Maximum Permissible Exposure (MPE) Estimation for MC706 1 Introduction HUAWEI MC706 is Wireless Module equipment in the CDMA/EVDO VER .A system, The frequency band is US Cellular and US PCS. The Wireless Module implements such functions as RF signal receiving / Transmitting, CDMA protocol processing etc. The Wireless Module uses QSC6085 chipset and Zero-IF technologies. 2 Limits and Guidelines on Exposure to Electromagnetic Fields According to the FCC Part 2.1091, we know: mobile device (transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters radiating structure(s) and the body of the user or nearby persons). And the Cellular radiotelephone service and PCS services are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if they operate at frequencies of 1.5 GHz or below and their effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. The radiated power of 800MHz for MC706 is 0.25W, so the MC706 is excluded from routine environmental evaluation for RF exposure according to the requirement of FCC Part 2.1091. The present document is given just only for reference. Uncontrolled limits are used for general public. General population/uncontrolled exposure apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. The exposure levels can be expressed in terms of power density, electric field strength, or magnetic field strength, as averaged over 30 minutes for the general public and 6 minutes for trained personnel. The exposure criterion is frequency dependent, and a chart covering the range from 3 kHz to 100 GHz can be found in NCRP No.86 (references IEEE C95.1-1999). Below are the limits. For CDMA/EVDO 800M Limits for Occupational/Controlled Exposure HUAWEI MC706 Electromagnetic Radiation Exposure Estimation 2 Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-3.0 3.0-30 30-300 300-1500 15,00-100,000 614 1842/f 61.4 -- -- 16.3/f 16.3/f 0.163 -- -- (100)* (900/f2)* 1.0 f/300 5 Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-1.34 1.34-30 30-300 300-15,00 15,00-100,000 614 824/f 27.5 -- -- 1.63 2.19/f 0.073 -- -- (100)* (180/f2)* 0.2 f/1500 1.0 Power density S [mW/cm2] for controlled area at 800 MHz 75.2 300 248 300 )( === MHzf S mW/cm 2 Power density S [mW/cm2] for uncontrolled area at 800 MHz 55.0 1500 248 1500 )( === MHzf S mW/cm 2 S= 0.55 mW/cm 2 = 5.5 W/m 2 for uncontrolled exposure For CDMA/EVDO 1900M Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) HUAWEI MC706 Electromagnetic Radiation Exposure Estimation 3 0.3-3.0 3.0-30 30-300 300-1500 15,00-100,000 614 1842/f 61.4 -- -- 16.3/f 16.3/f 0.163 -- -- (100)* (900/f2)* 1.0 f/300 5 Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) 0.3-1.34 1.34-30 30-300 300-15,00 15,00-100,000 614 824/f 27.5 -- -- 1.63 2.19/f 0.073 -- -- (100)* (180/f2)* 0.2 f/1500 1.0 Power density S [mW/cm2] for controlled area at 1900 MHz S=5mW/cm 2 Power density S [mW/cm2] for uncontrolled area at 1900 MHz S=1.0mW/cm 2 S= 1.0 mW/cm 2 = 10 W/m 2 for uncontrolled exposure Reference levels are provided for exposure assessment to determine whether the basic restrictions on exposure of humans to electromagnetic fields are exceeded. The basic restrictions on exposure to electromagnetic fields are based directly on established health effects and biological considerations. We can get the max ERP in channel 1013 from the RF report, the ERP is 24.15dBm, The EIRP is 26.3dBm. And the max EIRP in channel 25 from the RF report, the EIRP is 24.73dBm, 3 Location of EUT The EUT uses one monopole antenna. The source of the radiation is mounted on terminal; generally the direction of the antenna position is uprightness tabletop. The highest level of emission would be expected in close vicinity of the antenna and in line of sight to the antenna. HUAWEI MC706 Electromagnetic Radiation Exposure Estimation 4 4 Prediction of the Exposure to Electromagnetic Fields Calculations can be made on a site by site basis to ensure the power density is below the limits given above, or guidelines can be done beforehand to ensure the minimum distances from the antenna is maintained through the site planning. The calculations are based on FCC OET 65 Appendix B. 4.1 Calculation of the Safe Distance Below method describes a theoretical approach to calculate possible exposure to electromagnetic radiation around a base station transceiver antenna. Precise statements are basically only possible either with measurements or complex calculations considering the complexity of the environment (e.g. soil conditions, near buildings and other obstacles) which causes reflections, scattering of electromagnetic fields. The maximum output power (given in EIRP) of a base station is usually limited by license conditions of the network operator. A rough estimation of the expected exposure in power flux density on a given point can be made with the following equation. The calculations are based on FCC OET 65 Appendix B. π∗∗ ∗ = )(4 )( 2 mr GWP S numeric Whereas: P = Maximum output power in W of the site G numeric = Numeric gain of the antenna relative to isotropic antenna R = distance between the…

Text truncated - open the document above for the full version.

EMC Test Report Product Name: Wireless Module Model Number: MC706 FCC ID:QISMC706 Report No: SYBHZ(R)E020102009EB-1 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 Report onEMC Test of Wireless Module SYBHZ(R)E020102009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total27 Notice 1 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Report onEMC Test of Wireless Module Notice 2 Modification Information: Table 1 Modification Information 1 2 3 4 5 6 Modification Information 7 SYBHZ(R)E020102009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total27 Report onEMC Test of Wireless Module REPORT ON Wireless Module M/N: MC706 REGULATION FCC CFR47 Part 15: Subpart B; FCC CFR47 Part 22: Subpart H; FCC CFR47 Part 24: Subpart E; START OF TEST Nov.15, 2009 END OF TEST Nov.22, 2009 Final Judgement: Pass Approver 2009-11-25 张兴海 Date Name Signature Operator 2009-11-23 张 飞 Date Name Signature SYBHZ(R)E020102009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total27 Report onEMC Test of Wireless Module SYBHZ(R)E020102009EB-1 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total27 REPORT BODY CONTENT 1 Status ............................................................................................................................................6 1.1 Product Information.......................................................................................................................6 1.2 Applied Standard ..........................................................................................................................6 1.3 Test Site ........................................................................................................................................7 1.4 Test environment condition...........................................................................................................7 2 Summary of Results......................................................................................................................8 3 Equipment Specification ...............................................................................................................9 3.1 General Description ......................................................................................................................9 3.2 Sub-Assembly Identity ..................................................................................................................9 4 System Configuration during EMC Test .....................................................................................10 4.1 Cables Used during Test ............................................................................................................10 4.2 Associated Equipment Used during Test ...................................................................................10 4.3 Test Configurations and Test Mode............................................................................................10 4.4 Test conditions and test Connections.........................................................................................10 5 Electromagnetic Interference (EMI) ............................................................................................12 5.1 Radiated Disturbance 30MHz to 18000MHz..............................................................................12 5.2 Conducted Disturbance 0.15 MHz to 30MHz.............................................................................12 5.3 Radiated Spurious Emissions .....................................................................................................13 6 Main Test Instruments ................................................................................................................16 7 System Measurement Uncertainty..............................................................................................17 8 Graph and Data of Emission Test...............................................................................................18 8.1 Radiated Disturbance .................................................................................................................18 8.2 Conducted Disturbance ..................................................................................…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: Wireless Module Model Number: MC706 Report No: SYBHZ(R)E020102009EB-2 FCC ID: QISMC706 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of MC706 FCC ID: QISMC706 Security Level: Public Report No: SYBHZ(R)E020102009EB-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total35 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of MC706 FCC ID: QISMC706 Security Level: Public Report No: SYBHZ(R)E020102009EB-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total35 REPORT ON FCC Test of MC706 Wireless Module M/N: MC706 Report No: SYBHZ(R)E020102009EB-2 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; CONCLUSION Pass General Manager 2009.10.15 Date Name signature Technical Responsibility For Area of Testing 2009.10.15 Date Name signature Test Lab Engineer 2009.10.14 Date Name signature Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 FCC Test Report of MC706 FCC ID: QISMC706 Security Level: Public Report No: SYBHZ(R)E020102009EB-2 Confidential Information of Huawei. No Distribution without Permission Page4, Total35 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 7 3 Test Site Description................................................................................................................................. 8 3.1 TESTING PERIOD................................................................................................................................... 8 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 8 4 Product Description.................................................................................................................................. 9 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 9 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 11 5 Main Test Instruments............................................................................................................................. 12 6 Transmitter Measurements..................................................................................................................... 13 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................... 13 6.2 CONDUCTED OUTPUT POWER............................................................................................................... 17 6.3 MODULATION CHARACTERISTICS.......................................................................................................... 19 6.4 OCCUPIED BANDWIDTH........................................................................................................................ 21 6.5 BAND EDGES COMPLIANCE.................................................................................................................. 24 6.6 SPURIOUS EMISSION AT ANTENNA TERMINAL........................................................................................ 26 6.7 FREQUENCY STABILITY........................................................................................................................ 29 7 System Measurement Uncertainty......................................................................................................... 34 8 Appendixes.............................................................................................................................................. 35 FCC Test Report of MC706 FCC ID: QISMC706 S…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: Wireless Module Model Number: MC706 Report No: SYBHZ(R)E020102009EB-3 FCC ID: QISMC706 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 Report No: SYBHZ(R)E020102009EB-3 Confidential Information of Huawei. No Distribution without Permission Page2, Total35 Notice 1 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC TEST REPORT OF Wireless Module M/N: MC706 Report No: SYBHZ(R)E020102009EB-3 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 24: Subpart E; CONCLUSION PASS General Manager 2009.10.18 张兴海 Date Name signature Technical Responsibility For Area of Testing 2009.10.15 余 辉 Date Name signature Test Lab Engineer 2009.10.15 胡 俊 Date Name signature Report No: SYBHZ(R)E020102009EB-3 Confidential Information of Huawei. No Distribution without Permission Page3, Total35 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description................................................................................................................................6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 7 3 Test Site Description................................................................................................................................. 8 3.1 TESTING PERIOD..........................................................................................................…

Text truncated - open the document above for the full version.