QISME906ALTE Module

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Contents Getting to Know the ME906A ......................................................................................................................... 1 Assembly................................................................................................................................................................ 4 Installation Guide ................................................................................................................................................ 4 1 Thank you for purchasing HUAWEI ME906A LTE M.2 Module (hereinafter referred to as the ME906A) Note:  This manual briefly describes the preparation, the process for PCB Design, Assembly and safety precautions.  It is recommended to read the manual before using the ME906A. Getting to Know the ME906A  The ME906A module is 75 pin Gold Finger with a dimension of 42 mm × 30 mm × 2.3mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment. 2  Antenna interface It is used to connect and fix an antenna.  Fixing hole A screw, metal fastener, and nut are used to fix an ME906A module on a development board through this fixing hole.  Gold Finger It is connected to the M.2 connector on the development board. Note:  In certain cases, your development board may be disassembled only by the professionals.  Before you install the ME906A onto the development board, consult the development board manufacturer or read the user manual of the development board. 3 4 Assembly Through the M.2 connector Installation Guide Installing and Using an ME906A Module 1. Connect an antenna connector to the antenna interface of an ME906A. Note:  Insert the antenna connectors vertically into the antenna interfaces of the ME906A.  Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless performance of the ME906A be reduced or the ME906A cannot work normally.  Ensure that the antenna is placed normally. 2. Fasten the golden finger in the ME906A module to a M.2 connector of a development board to fix the ME906A module on the development board. 3. Place a metal fastener between the ME906A module and the development board. Put a screw through the fixing hole of the ME906A, metal fastener, and fixing hole of the development board in sequence. Then fasten a nut on the screw. 4. Insert a UIM card into the UIM card socket in the development board. 5 Removing an ME906A Module from a Development Board 1. Remove the UIM card from the UIM card socket. 2. Power off 3. Remove the screw on the ME906A module. 4. Remove the ME906A module from the development board. 5. Remove the antenna from the ME906A module.

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use your device safely. Read this information carefully before using the device. Electronic Device Do not use your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices. Medical Device  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. For any such problems, consult your service provider.  If you are using an electronic medical device, consult the doctor or the device manufacturer to confirm whether radio waves affect the operation of this device. Potentially Explosive Atmosphere Do not use your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not use your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security  Observe local laws and regulations while using the device. To prevent accidents, do not use your wireless device while driving.  RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates.  Do not use your device while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Operating Environment  Do not use the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in malfunction of the circuit.  On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning.  While using the device, observe the local laws and regulations, and respect others' privacy and legal rights. Safety of Children Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. Accessories Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the d…

Text truncated - open the document above for the full version.

HUAWEI Technologies Co., Ltd. Date (09/07/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Bu Cookies Phone: +86-755-88286998 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: Type of equipment: LTE Module Model no.: ME906A FCC ID: QISME906A This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2013-07-09 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISME906A To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

Huawei Technologies Co., Ltd. Date (10/07/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Ref: Application Modular Approval Certification for Product Type: LTE Module, Model: ME906A, FCC ID: QISME906A; Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby clarify the following attestation addresses the fourth requirements to support modular approval: 1. This device is designed for mobile or fixed operation; Portable operation is subject to a class II permissive change application or to a new and separate FCC ID/IC ID. 2. The maximum antenna gain is limited to 2.5 dBi for 850MHz frequency band, 2.5 dBi in the 1900MHz frequency band, 2.5 dBi in the 1700MHz LTE FDD band IV, 2.5 dBi in the 700MHz LTE FDD band XVII as calculated in the RF exposure exhibit. 3. The product has a FCC/IC ID label on the device itself. Also, the OEM host end product manufacturer will be informed to display a label referring to the enclosed module. The exterior label will read as follows: “Contains FCC ID: QISME906A”. 4. We request to include in the Grant the following words in device description or Grant notes: “Modular transmitter”, or “transmitter module”. If there are any additional questions or if further information is needed, please contact us. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

HUAWEI Technologies Co., Ltd. Date (09/07/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Ref: Application Modular Approval Certification for Product Type: LTE Module, Model: ME906A, FCC ID: QISME906A; Dear Sir or Madam, The Huawei Technologies Co., Ltd.-LTE Module-ME906A is seeking FCC authorization as a modular transmitter. All the requirement of the FCC public notice DA00-1407 are met by following statements: 1. The modular transmitter must have its own RF Shielding. Confirmed, the shielding of radio portion can be demonstrated in exhibition “external photos”. 2. The modular transmitter must have buffered modulation/data inputs. Confirmed, the modular has its digital buffered data inputs. 3. The modular transmitter must have its own power supply regulation. Confirmed, the transmitter has its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna. Confirmed, the module has been tested with external antenna. 5. The modular transmitter must be tested in a stand-alone configuration. Confirmed, see the FCC test report and test setup photos. 6. The modular transmitter must be labelled with its own FCC ID number. Confirmed, the FCC ID will be QISME906A, see exhibition “label” and “label location”. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instructions along with module to explain any such requirement. A copy of these instructions must be included in the application for equipment authorization. Confirmed, the module complies with all applicable FCC rules. Instruction for maintaining compliance are given in the user instructions. 8. The modular transmitter must comply with any application RF exposure requirements. Confirmed, see exhibition “Maximum Permissible Exposure (MPE) Estimation”. If there are any additional questions or if further information is needed, please contact us. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Zhangxinghai EMC Laboratory Manager

ME906A SECRET Page1, Total2 External Photos of ME906A ME906A SECRET Page2, Total2

ME906A SECRET Page1, Total1 ID Label ME906A

ME906A SECRET Page1, Total1 ID Label Location_ ME906A

ME906A SECRET Page1, Total2 Internal Photos of ME906A ME906A SECRET Page2, Total2

EMC Test Report Product Name: LTE Module Model Number: ME906A Report No: SYBH(Z-EMC)070062013-2 FCC ID: QISME906A Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total18 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 5. The test report is invalid if not marked with "exclusive stamp for the test report". 6. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 9. Normally, the test report is only responsible for the samples that have undergone the test. 10. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total18 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Test Item: Jun.21, 2013 Start Date of Test: Jun.25, 2013 End Date of Test: July.03, 2013 Test Result: Pass Approved By 2013-07-04 Liu Chunlin (Lab Manager) Date Name Signature Operator 2013-07-04 Zheng Ke (Test Engineer) Date Name Signature FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total18 Modification Record No. Last Report No. Modification Description 1 NA First report FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total18 TABLE OF CONTENT 1 General Information ............................................................................................................................. 6 1.1 EUT Description ........................................................................................................................... 6 1.2 Test Site Information .................................................................................................................... 7 1.3 Applied Standards ........................................................................................................................ 7 2 Summary of Results ............................................................................................................................. 8 3 System Configuration during EMC Test .............................................................................................. 9 3.1 Test Mode ..................................................................................................................................... 9 3.2 Test System Configuration ........................................................................................................... 9 3.3 Cables Used during Test ............................................................................................................ 10 3.4 Associated Equipment Used during Test .................................................................................. 10 4 Electromagnetic Interference (EMI) ................................................................................................... 11 4.1 Radiated Disturbance 30MHz to 18GHz ................................................................................... 11 4.2 Conducted Disturbance 0.15 MHz to 30MHz ............................................................................ 13 5 Main Test Instruments ........................................................................................................................ 14 6 System Measurement Uncertainty .................................................................................................... 14 7 Test Data and Graph .......................................................................................................................... 15 7.1 Radiated Disturbance ................................................................................................................. 15 7.2 Conducted Disturbance .............................................................................................................. 17 FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total18 1 General Information 1.1 EUT Description EUT Description Product Name LTE Module Model Number ME906A Input voltage DC 3.3V TX Frequency GSM 850:824 MHz To 849 MHz GSM1900:1850MHz To 1910MHz WCDMA BAND II:1850 MHz To 191…

Text truncated - open the document above for the full version.

FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Permission Page1, Total5 Photos of EUT FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Permission Page2, Total5 Figure1 EUT Appearance FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Permission Page3, Total5 Photos of Test Setup FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Permission Page4, Total5 1 Radiated Emissions Radiated Disturbance Emissions (below 1GHz) Radiated Disturbance Emissions (1GHz to18GHz) FCC Test Report of ME906A FCC ID: QISME906A Security Level: secret Report No: SYBH(Z-EMC)070062013-2 Confidential Information of Huawei. No Distribution without Permission Page5, Total5 2 Conducted Emissions Conducted Emissions with AC Ports ----------------------------------------------------------- END-----------------------------------------------------------