QISME906EModular Transmitter supporting GSM850, PCS1900, UMTS FDD II/V, LTE FDD II/V/VII.

1 Warnings and precautions This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Accessories  Using an unapproved or incompatible charger or battery may cause fire, explosion or other hazards.  Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Operating environment  Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using or charging your device in these environments may result in circuit malfunctions.  Do not use your device during thunderstorms to protect your device against any danger caused by lightning.  Connect the device only to products with the USB-IF logo or with USB-IF compliance program completion.  Observe local laws and regulations, and respect the privacy and legal rights of others.  Do not touch the device's internal antenna. Otherwise, communication quality may be reduced or the device may emit unintended levels of radio frequency (RF) energy.  Ideal operating temperatures are -10 °C to +55 °C. Extreme heat or cold may damage your device or accessories.  Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods.  Do not place your device or accessories on or in heating devices, such as microwave ovens, stoves, water heaters, or radiators. Batteries may explode if overheated.  Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.  Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not enclose or cover your device with towels or other objects. Do not place the device in a container with poor heat dissipation, such as a box or bag.  The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Child's safety  Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children.  The device and its accessories are not intended for use by children. Children should only use the device with adult supervision. Interference with medical equipment Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited. Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information. If you are using an electronic medical device, consult your doctor or device manufacturer to confirm whether radio waves affect device operation. Areas with flammables and explosives  Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols.  Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security  Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.  RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates.  Do not use your device while flying in an aircraft or immediately before boarding. Using wireless devices in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. Cleaning and maintenance  Before you clean or maintain the device, stop all applications, power it off, and disconnect all cables connected to it.  Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to clean the device and accessories.  Keep the device and accessories dry. Protect them from water and humidity. Do not touch the device or accessories with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.  Do not place magnetic storage media, such as magnetic cards and floppy disks, near the device. Radiation from the device may erase the information on magnetic storage media.  Do not expose the device or accessories to extreme heat or cold. These environments may interfere with proper function and may lead to fire or explosion.  Do not dismantle the device or accessories. This voids the warranty and releases the manufacturer from liability for damage. FCC Statement  This device should be installed and operated with a minimum distance of 20 cm between the device and your body.  15.19  NOTICE:  This device complies with Part 15 of the FCC Rules  Operation is subject to the following two conditions:  This device may not cause harmful interference, and  This device must accept any interference received, including interference that may cause undesired operation.  15.21  NOTICE:  Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device.  15.105  NOTE:  This device has been tested and found to comply with the limits…

Text truncated - open the document above for the full version.

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Contents Getting to Know the ME906E ............................................................................................................................... 1 Assembly ...................................................................................................................................................................... 3 1 Thank you for purchasing HUAWEI ME906E LTE Module (hereinafter referred to as the ME906E) Note: „ This manual briefly describes the preparation, Assembly and safety precautions. „ You are recommended to read the manual before using the ME906E Getting to Know the ME906E The module is standard NGFF interface with a dimension of 30 mm × 42 mm × 2.3 mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment. 2 3 Assembly It refers to M.2 specification. The module will need a mechanical retention at the end of the board. The module specifies a 5.5 mm Dia. keep out zone at the end for attaching a screw. The module Stand-off and mounting screw also serve as part of the module Electrical Ground path. The Stand-off should be connected directly to the ground plane on the platform. So that when the module is mounted and the mounting screw is screwed on to hold the module in place, this will make the electrical ground connection from the module to the platform ground plane. The stand-off must provide a Thermal Ground Path. The design requirements for thermal are a material with a minimum conductivity of 50 watts per meter Kelvin and surface area of 22 Sq mm.

HUAWEI Technologies Co., Ltd. Date (17/05/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Bu Cookies Phone: +86-755-88286998 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: Type of equipment: LTE Module Model no.: ME906E FCC ID: QISME906E This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2013-05-23 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISME906E To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

Huawei Technologies Co., Ltd. Date (23/05/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Ref: Application Modular Approval Certification for Product Type: LTE Module, Model: ME906E, FCC ID: QISME906E; Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby clarify the following attestation addresses the fourth requirements to support modular approval: 1. This device is designed for mobile or fixed operation; Portable operation is subject to a class II permissive change application or to a new and separate FCC ID/IC ID. 2. The maximum antenna gain is limited to 2.5 dBi for 850MHz frequency band, 2.5 dBi in the 1900MHz frequency band, 2.5 dBi in the 2500MHz LTE FDD band VII as calculated in the RF exposure exhibit. 3. The product has a FCC/IC ID label on the device itself. Also, the OEM host end product manufacturer will be informed to display a label referring to the enclosed module. The exterior label will read as follows: “Contains FCC ID: QISME906E”. 4. We request to include in the Grant the following words in device description or Grant notes: “Modular transmitter”, or “transmitter module”. If there are any additional questions or if further information is needed, please contact us. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

HUAWEI Technologies Co., Ltd. Date (17/05/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Ref: Application Modular Approval Certification for Product Type: LTE Module, Model: ME906E, FCC ID: QISME906E; Dear Sir or Madam, The Huawei Technologies Co., Ltd.-LTE Module-ME906E is seeking FCC authorization as a modular transmitter. All the requirement of the FCC public notice DA00-1407 are met by following statements: 1. The modular transmitter must have its own RF Shielding. Confirmed, the shielding of radio portion can be demonstrated in exhibition “external photos”. 2. The modular transmitter must have buffered modulation/data inputs. Confirmed, the modular has its digital buffered data inputs. 3. The modular transmitter must have its own power supply regulation. Confirmed, the transmitter has its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna. Confirmed, the module has been tested with external antenna. 5. The modular transmitter must be tested in a stand-alone configuration. Confirmed, see the FCC test report and test setup photos. 6. The modular transmitter must be labelled with its own FCC ID number. Confirmed, the FCC ID will be QISME906E, see exhibition “label” and “label location”. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instructions along with module to explain any such requirement. A copy of these instructions must be included in the application for equipment authorization. Confirmed, the module complies with all applicable FCC rules. Instruction for maintaining compliance are given in the user instructions. 8. The modular transmitter must comply with any application RF exposure requirements. Confirmed, see exhibition “Maximum Permissible Exposure (MPE) Estimation”. If there are any additional questions or if further information is needed, please contact us. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Zhangxinghai EMC Laboratory Manager

ME906E SECRET Page1, Total2 External Photos of ME906E ME906E SECRET Page2, Total2

ME906E SECRET Page1, Total1 ID Label Location_ME906E

ME906E SECRET Page1, Total1 ID Label ME906E

ME906E SECRET Page1, Total2 Internal Photos of ME906E ME906E SECRET Page2, Total2

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Maximum Permissible Exposure(MPE) Estimation Report Product Name: LTE Module Model: ME906E Report No.: SYBH(Z-SAR)041042013-2 FCC ID: QISME906E APPROVED (Lab Manager) CHECKED PREPARED BY DATE 2013-05-08 2013-05-08 2013-05-08 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report NO.: SYBH(Z-SAR)041042013-2 FCC ID:QISME906E 2013-05-08 Page 2 of 11 ※ ※ Modified History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release 2013-05-08 Sun Shaobin Report NO.: SYBH(Z-SAR)041042013-2 FCC ID:QISME906E 2013-05-08 Page 3 of 11 Table of Contents 1 EUT Description ................................................................................................................. 4 1.1 General Description ................................................................................................. 4 2 Test specification(s) ............................................................................................................ 5 3 Testing laboratory ............................................................................................................... 5 4 Applicant and Manufacturer ............................................................................................... 5 5 Application details ............................................................................................................... 5 6 Ambient Condition .............................................................................................................. 5 7 RF Exposure Requirements ............................................................................................... 6 8 RF Exposure Evaluation ..................................................................................................... 9 8.1 Operation in GSM850 .............................................................................................. 9 8.2 Operation in GSM1900 ............................................................................................ 9 8.3 Operation in UMTS Band II ................................................................................... 10 8.4 Operation in UMTS Band V ................................................................................... 10 8.5 Operation in LTE Band II ....................................................................................... 10 8.6 Operation in LTE Band V ...................................................................................... 11 8.7 Operation in LTE Band VII .................................................................................... 11 Report NO.: SYBH(Z-SAR)041042013-2 FCC ID:QISME906E 2013-05-08 Page 4 of 11 1 EUT Description 1.1 General Description ME906E LTE/HSPA+/HSUPA/HSDPA/WCDMA(UMTS)/ GPRS/EDGE dual mode Wireless Module is subscriber equipment in the LTE/UMTS/GSM system. ME906E implement such functions as RF signal receiving/transmitting, LTE/HSPA+/HSUPA /HSDPA /WCDMA and EDGE/GPRS protocol processing, data service etc. In addition,the ME906E Module support GPS / GLONASS: L1. Device Information： DUT Name: LTE Module Type Identification: ME906E Device Type : Mobile device FCC ID: QISME906E Exposure Category: Uncontrolled environment/general population Hardware Version : MD1ME906EM Software Version : 11.234.37.09.00 Antenna Type : External Antenna Device Operating Configurations: Supporting Mode(s) GSM850/1900,UMTS Band II/V, LTE Band II/V/VII Test Modulation GMSK/QPSK/16QAM/64QAM Operating Frequency Range(s) Band Tx (MHz) Rx (MHz) GSM850 824-849 869-894 GSM1900 1850-1910 1930-1990 UMTS Band II 1850-1910 1930-1990 UMTS Band V 824-849 869-894 LTE Band II 1850-1910 1930-1990 LTE Band V 824-849 869-894 LTE Band VII 2500-2570 2620-2690 Report NO.: SYBH(Z-SAR)041042013-2 FCC ID:QISME906E 2013-05-08 Page 5 of 11 2 Test specification(s) SUPPLEMENT C Edition 01-01 to OET65c Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields – Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions ANSI Std C95.1-1992 Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz.(IEEE Std C95.1-1991) RSS-102 Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands (Issue 4 of March 2010)) KDB 447498 D01v05 General RF Exposure Guidance 3 Testing laboratory Test Site The Reliability Laboratory of Huawei Technologies Co., Ltd. Test Location Zone K3,Huawei Industrial Base, Bantian Industry Area, Longgang District, Shenzhen, Guangdong, China Telephone +86 755 28780808 Fax +86 755 89652518 State of accreditation The Test laboratory (area of testing) is accredited according to ISO/IEC 17025. CNAS Registration number: L0310 A2LA TESTING CERT #2174.01 4 Applicant and Manufacturer Company Name HUAWEI TECHNOLOGIES CO., LTD Address Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C 5 Application details Start Date of test 2013-05-08 End Date of test 2013-05-08 6 Ambient Condition Ambient temperature 20°C – 24°C Relative Humidity 30% – 70% Report NO.: SYBH(Z-SAR)041042013-2 FCC ID:QISME906E 2013-05-08 Page 6 of 11 7 RF Exposure Requirements An estimation of MPE in this application for product is used to ensure if it complies to …

Text truncated - open the document above for the full version.

RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 819 Appendix for Test report RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 819 APPENDIX FOR TEST REPORT 1APPENDIX_A: TRANSMIT OUTPUT POWER DATA .................................................................................................... 4 Part I - Test Results ............................................................................................................................................. 4 2APPENDIX_B: PEAK-TO-AVERAGE RATIO .............................................................................................................. 26 Part I - Test Results ........................................................................................................................................... 26 3APPENDIX_C: MODULATION CHARACTERISTICS ................................................................................................... 38 Part I - Test Plots ................................................................................................................................................ 38 3.1 For GSM ....................................................................................................................................................... 38 3.2 For UMTS ..................................................................................................................................................... 42 3.3 For LTE ......................................................................................................................................................... 44 3.3.1 Test Band = BAND2 ................................................................................................................................ 44 3.3.2 Test Band = BAND5 ................................................................................................................................ 56 3.3.3 Test Band = BAND7 ................................................................................................................................ 64 4APPENDIX_D: BANDWIDTH .................................................................................................................................... 72 Part I - Test Results ........................................................................................................................................... 72 Part II - Test Plots............................................................................................................................................... 76 4.1 For GSM ....................................................................................................................................................... 76 4.2 For UMTS ..................................................................................................................................................... 88 4.3 For LTE ......................................................................................................................................................... 94 4.3.1 Test Band = BAND2 ................................................................................................................................ 94 4.3.2 Test Band = BAND5 .............................................................................................................................. 130 4.3.3 Test Band = BAND7 .............................................................................................................................. 154 5APPENDIX_E: BAND EDGES COMPLIANCE .......................................................................................................... 178 Part I - Test Plots .............................................................................................................................................. 178 5.1 For GSM ..................................................................................................................................................... 178 5.2 For UMTS ................................................................................................................................................... 186 5.3 For LTE ....................................................................................................................................................... 190 5.3.1 Test Band = BAND2 .............................................................................................................................. 190 5.3.2 Test Band = BAND5 .............................................................................................................................. 286 5.3.3 Test Band = BAND7 .............................................................................................................................. 350 6APPENDIX_F: SPURIOUS EMISSION AT ANTENNA TERMINAL .............................................................................. 414 Part I - Test Plots .............................................................................................................................................. 414 6.1 For GSM ..................................................................................................................................................... 414 6.2 For UMTS ................................................................................................................................................... 456 6.3 For LTE ....................................................................................................................................................... 477 6.3.1 Test Band = BAND2 ................................................................................................…

Text truncated - open the document above for the full version.

RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 101 of 819 4.3.1.1.3.2 Test Channel = MCH 4.3.1.1.3.2.1 Test RB = RB25#0 RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 102 of 819 4.3.1.1.3.3 Test Channel = HCH 4.3.1.1.3.3.1 Test RB = RB25#0 RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 103 of 819 4.3.1.1.4 Test Bandwidth = 10 4.3.1.1.4.1 Test Channel = LCH 4.3.1.1.4.1.1 Test RB = RB50#0 RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 104 of 819 4.3.1.1.4.2 Test Channel = MCH 4.3.1.1.4.2.1 Test RB = RB50#0 RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 105 of 819 4.3.1.1.4.3 Test Channel = HCH 4.3.1.1.4.3.1 Test RB = RB50#0 RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 106 of 819 4.3.1.1.5 Test Bandwidth = 15 4.3.1.1.5.1 Test Channel = LCH 4.3.1.1.5.1.1 Test RB = RB75#0 RF Test Report of ME906E FCC ID: QISME906E Security Level: Public Report No.: SYBH(Z-RF)032042013-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 107 of 819…

Text truncated - open the document above for the full version.