QISME906VME906V is an LTE Module which supports GSM/GPRS/EDGE850/1900, UMTS850/1900/1700, CDMA BC0, CDMA BC1, LTE Bands 2, 4, 5, 13, 17.

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use your device safely. Read this information carefully before using the device. Electronic Device Do not use your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices. Medical Device  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. For any such problems, consult your service provider.  If you are using an electronic medical device, consult the doctor or the device manufacturer to confirm whether radio waves affect the operation of this device. Potentially Explosive Atmosphere Do not use your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not use your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security  Observe local laws and regulations while using the device. To prevent accidents, do not use your wireless device while driving.  RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates.  Do not use your device while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Operating Environment  Do not use the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in malfunction of the circuit.  On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning.  While using the device, observe the local laws and regulations, and respect others' privacy and legal rights. Safety of Children Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. Accessories Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the d…

Text truncated - open the document above for the full version.

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. i Contents Getting to Know the ME906V ......................................................................................................................... 1 Assembly................................................................................................................................................................ 4 Installation Guide ................................................................................................................................................ 4 1 Thank you for purchasing HUAWEI ME906V LTE M.2 Module (hereinafter referred to as the ME906V) Note:  This manual briefly describes the preparation, the process for PCB Design, Assembly and safety precautions.  It is recommended to read the manual before using the ME906V. Getting to Know the ME906V  The ME906V module is 75 pin Gold Finger with a dimension of 42 mm × 30 mm × 2.3mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment. 2  Antenna interface It is used to connect and fix an antenna.  Fixing hole A screw, metal fastener, and nut are used to fix an ME906V module on a development board through this fixing hole.  Gold Finger It is connected to the M.2 connector on the development board. Note:  In certain cases, your development board may be disassembled only by the professionals.  Before you install the ME906V onto the development board, consult the development board manufacturer or read the user manual of the development board. 3 4 Assembly Through the M.2 connector Installation Guide Installing and Using an ME906V Module 1. Connect an antenna connector to the antenna interface of an ME906V. Note:  Insert the antenna connectors vertically into the antenna interfaces of the ME906V.  Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless performance of the ME906V be reduced or the ME906V cannot work normally.  Ensure that the antenna is placed normally. 2. Fasten the the gold finger in the ME906V module to a M.2 connector of a development board to fix the ME906V module on the development board. 3. Place a metal fastener between the ME906V module and the development board. Put a screw through the fixing hole of the ME906V, metal fastener, and fixing hole of the development board in sequence. Then fasten a nut on the screw. 4. Insert a UIM card into the UIM card socket in the development board. 5 Removing an ME906V Module from a Development Board 1. Remove the UIM card from the UIM card socket. 2. Power off 3. Remove the screw on the ME906V module. 4. Remove the ME906V module from the development board. 5. Remove the antenna from the ME906V module.

HUAWEI Technologies Co., Ltd. Date (09/01/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Ref: Application Modular Approval Certification for Product Type: LTE Module, Model: ME906V, FCC ID: QISME906V; Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby clarify the following attestation addresses the fourth requirements to support modular approval: 1. This device is designed for mobile or fixed operation; Portable operation is subject to a class II permissive change application or to a new and separate FCC ID/IC ID. 2. The maximum antenna gain is limited to 2.5 dBi for GSM/UMTS850/1900, UMTS1700, CDMA BC0, CDMA BC1, LTE Band 2&4&5&13&17, as calculated in the RF exposure exhibit. 3. The product has a FCC/IC ID label on the device itself. Also, the OEM host end product manufacturer will be informed to display a label referring to the enclosed module. The exterior label will read as follows: “Contains FCC ID: QISME906V”. 4. We request to include in the Grant the following words in device description or Grant notes: “Modular transmitter”, or “transmitter module”. If there are any additional questions or if further information is needed, please contact us. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

HUAWEI Technologies Co., Ltd. Date (09/01/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Ref: Application Modular Approval Certification for Product Type: LTE Module, Model: ME906V, FCC ID: QISME906V; Dear Sir or Madam, The Huawei Technologies Co., Ltd.-LTE Module-ME906V is seeking FCC authorization as a modular transmitter. All the requirement of the FCC public notice DA00-1407 are met by following statements: 1. The modular transmitter must have its own RF Shielding. Confirmed, the shielding of radio portion can be demonstrated in exhibition “external photos”. 2. The modular transmitter must have buffered modulation/data inputs. Confirmed, the modular has its digital buffered data inputs. 3. The modular transmitter must have its own power supply regulation. Confirmed, the transmitter has its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna. Confirmed, the module has been tested with external antenna. 5. The modular transmitter must be tested in a stand-along configuration. Confirmed, see the FCC test report and test setup photos. 6. The modular transmitter must be labelled with its own FCC ID number. Confirmed, the FCC ID will be QISME906V, see exhibition “label” and “label location”. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instructions along with module to explain any such requirement. A copy of these instructions must be included in the application for equipment authorization. Confirmed, the module complies with all applicable FCC rules. Instruction for maintaining compliance are given in the user instructions. 8. The modular transmitter must comply with any application RF exposure requirements. Confirmed, see exhibition “Maximum Permissible Exposure (MPE) Estimation”. If there are any additional questions or if further information is needed, please contact us. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Zhangxinghai EMC Laboratory Manager

HUAWEI Technologies Co., Ltd. Date (09/01/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Bu Cookies Phone: +86-755-88286998 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: Type of equipment: LTE Module Model no.: ME906V FCC ID: QISME906V This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

1(2) Huawei Technologies Co., Ltd. Attention: Application Examiner Re: Request for confidentiality Applicant: Huawei Technologies Co., Ltd. FCC ID: QISME906V To whom it may concern, Permanent Confidentiality Request is hereby submitted by Huawei Technologies Co., Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block diagrams  Detailed Operational/Functional Description  BOM list/tune-up procedure Short-term Confidentiality Request is hereby submitted by Huawei Technologies Co., Ltd. to withhold from public review for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 45 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User manual 2(2) Rationale for request for confidentiality: Huawei Technologies Co., Ltd. has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.][Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature]: Zhang Xinghai [Title]: EMC Laboratory Manager [Company name] :Huawei Technologies Co., Ltd.

ME906V SECRET Page1, Total2 External Photos of ME906V ME906V SECRET Page2, Total2

ME906V SECRET Page1, Total1 ID Label ME906V

ME906V SECRET Page1, Total1 ID Label Location_ ME906V

ME906V SECRET Page1, Total2 Internal Photos of ME906V ME906V SECRET Page2, Total2

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Maximum Permissible Exposure(MPE) Estimation Report Product Name: LTE Module Model: ME906V Report No.: SYBH(Z-SAR)019122012-2 FCC ID: QISME906V APPROVED CHECKED PREPARED BY DATE 2012-12-25 2012-12-25 2012-12-25 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report NO.: SYBH(Z-SAR)019122012-2 FCC ID:QISME906V 2012-12-25 Page 2 of 13 ※ ※ Modified History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release 2012-12-25 Sun Shaobin Report NO.: SYBH(Z-SAR)019122012-2 FCC ID:QISME906V 2012-12-25 Page 3 of 13 Table of Contents 1 EUT Description ................................................................................................................. 4 1.1 General Description ................................................................................................. 4 2 Test specification(s) ............................................................................................................ 5 3 Testing laboratory ............................................................................................................... 5 4 Applicant and Manufacturer ............................................................................................... 5 5 Application details ............................................................................................................... 5 6 Ambient Condition .............................................................................................................. 5 7 RF Exposure Requirements ............................................................................................... 6 8 RF Exposure Evaluation ..................................................................................................... 9 8.1 Operation in GSM850 .............................................................................................. 9 8.2 Operation in GSM1900 .......................................................................................... 10 8.3 Operation in UMTS Band II ................................................................................... 10 8.4 Operation in UMTS Band IV .................................................................................. 11 8.5 Operation in UMTS Band V ................................................................................... 11 8.6 Operation in LTE Band II ....................................................................................... 11 8.7 Operation in LTE Band IV ..................................................................................... 12 8.8 Operation in LTE Band V ...................................................................................... 12 8.9 Operation in LTE Band XIII ................................................................................... 12 8.10 Operation in LTE Band XVII .................................................................................. 13 8.11 Operation in CDMA BC0 ....................................................................................... 13 8.12 Operation in CDMA BC1 ....................................................................................... 13 Report NO.: SYBH(Z-SAR)019122012-2 FCC ID:QISME906V 2012-12-25 Page 4 of 13 1 EUT Description 1.1 General Description ME906V LTE/CDMA /HSDPA/HSUPA/HSPA+ /WCDMA(UMTS)/GSM/GPRS/EDGE multimode Wireless Module is subscriber equipment in the LTE/CDMA/UMTS/GSM system. ME906V implement such functions as RF signal receiving/transmitting, LTE/CDMA/ HSDPA/HSUPA/HSPA+/WCDMA and EDGE/GPRS/GSM protocol processing, data service etc. Externally it provides M.2 interface. Device Information： DUT Name: LTE Module Type Identification: ME906V IMEI No: 868139010005517 Device Type : Mobile Exposure Category: Uncontrolled environment/general population Hardware Version : MD1ME906VM Software Version : 11.220.01.01.000 Antenna Type : External antenna Device Operating Configurations: Supporting Mode(s) GSM850/1900,UMTS Band II/IV/V, LTE Band II/IV/V/XIII/XVII,CDMA BC0/BC1 Test Modulation GMSK/8PSK/QPSK/16QAM Operating Frequency Range(s) Band Tx (MHz) Rx (MHz) GSM850 824-849 869-894 GSM1900 1850-1910 1930-1990 UTMS Band II 1850-1910 1930-1990 UMTS Band IV 1710-1755 2110-2155 UTMS Band V 824-849 869-894 LTE Band II 1850-1910 1930-1990 LTE Band IV 1710–1755 2110–2155 LTE Band V 824-849 869-894 LTE Band XIII 777–787 746–756 LTE Band XVII 704–716 734–746 CDMA BC0 824-849 869-894 CDMA BC1 1850-1910 1930-1990 Report NO.: SYBH(Z-SAR)019122012-2 FCC ID:QISME906V 2012-12-25 Page 5 of 13 2 Test specification(s) SUPPLEMENT C Edition 01-01 to OET65c Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields – Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions ANSI Std C95.1-1992 Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz – 300 GHz.(IEEE Std C95.1-1991) RSS-102 Radio Frequency Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands (Issue 4 of March 2010)) KDB 447498 D01v05 General RF Exposure Guidance 3 Testing laboratory Test Site The Reliability Laboratory of Huawei Technologies Co., Ltd. Test Location Zone K3,Huawei Industrial Base, Bantian Industry Area, Longgang District, Shenzhen, Guangdong, China Telephone +86 755…

Text truncated - open the document above for the full version.

RF Test Report of ME906V FCC ID:QISME906V Security Level: Public Report No: SYBH(Z-RF)009122012 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 214 Appendix for Test report RF Test Report of ME906V FCC ID:QISME906V Security Level: Public Report No: SYBH(Z-RF)009122012 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 214 Content 1Appendix_A: Effective Radiated Power Output Data ........................................................................... 3 Part I - Test Results ......................................................................................................................... 3 Part I - Test Results ......................................................................................................................... 5 2Appendix_B: Bandwidth ....................................................................................................................... 6 Part I - Test Results ......................................................................................................................... 6 Part II - Test Plots ............................................................................................................................ 8 2.1 For CDMA/1X ............................................................................................................................ 8 3Appendix_C: Band Edges Compliance .............................................................................................. 44 Part I - Test Plots ........................................................................................................................... 44 4Appendix_D: Spurious Emission at Antenna Terminal ....................................................................... 68 Part I - Test Plots ........................................................................................................................... 68 5Appendix_E: Radiated spurious emission ........................................................................................ 194 6Appendix_F: Frequency Stability ...................................................................................................... 207 6.1.1Frequency Error vs. Voltage:............................................................................................... 207 6.1.2Frequency Error vs. Temperature: ...................................................................................... 209 RF Test Report of ME906V FCC ID:QISME906V Security Level: Public Report No: SYBH(Z-RF)009122012 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 214 1Appendix_A: Effective Radiated Power Output Data Part I - Test Results Test Band Test Mode Freq. [MHz] Meas. Level [dBm] Substitution Antenna Type SGP [dBm] Substitu tion Gain [dBi] Cable Loss [dB] Substitu tion Level (ERP) [dBm] FCC limit [dBm] Result BC0 CDMA /TM1 824.7 23.96 Dipole Ant. 27.31 -2.95 0.6 23.76 38.5 Pass 836.52 24 Dipole Ant. 27.75 -3.02 0.6 23.13 38.5 Pass 848.31 23.84 Dipole Ant. 27.62 -2.11 0.6 23.91 38.5 Pass CDMA /TM3 824.7 23.92 Dipole Ant. 26.27 -2.95 0.6 23.72 38.5 Pass 836.52 23.97 Dipole Ant. 27.64 -3.02 0.6 24.02 38.5 Pass 848.31 23.81 Dipole Ant. 27.59 -2.11 0.6 23.88 38.5 Pass CDMA /EV-D O/Subt ype0 824.7 23.73 Dipole Ant. 27.35 -2.95 0.6 23.8 38.5 Pass 836.52 23.7 Dipole Ant. 26.12 -3.02 0.6 23.5 38.5 Pass 848.31 23.52 Dipole Ant. 27.42 -2.11 0.6 23.71 38.5 Pass CDMA /EV-D O/Subt ype2 824.7 23.59 Dipole Ant. 26.94 -2.95 0.6 23.39 38.5 Pass 836.52 23.62 Dipole Ant. 27.04 -3.02 0.6 23.42 38.5 Pass 848.31 23.71 Dipole Ant. 27.42 -2.11 0.6 23.71 38.5 Pass Note: a, For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be taken to calculate it, ERP [dBm] = SGP [dBm] – Cable Loss [dB] + Gain [dBd] b, SGP=Signal Generator Level Test Band Test Mode Freq. [MHz] Meas. Level [dBm] Substitution Antenna Type SGP [dBm] Substitu tion Gain [dBi] Cable Loss [dB] Substitu tion Level (ERP) [dBm] FCC limit [dBm] Result BC1 CDMA /TM1 1851.25 25.65 Horn Ant. 21.95 4.5 1 25.45 33 Pass 1880 25.72 Horn Ant. 22.02 4.5 1 25.52 33 Pass 1908.75 25.65 Horn Ant. 21.99 4.8 1 25.79 33 Pass RF Test Report of ME906V FCC ID:QISME906V Security Level: Public Report No: SYBH(Z-RF)009122012 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 214 CDMA /TM3 1851.25 25.67 Horn Ant. 22.26 4.5 1 25.76 33 Pass 1880 25.7 Horn Ant. 22.34 4.5 1 25.84 33 Pass 1908.75 25.64 Horn Ant. 21.97 4.8 1 25.77 33 Pass CDMA /EV-D O/Subt ype0 1851.25 25.8 Horn Ant. 22.1 4.5 1 25.6 33 Pass 1880 25.98 Horn Ant. 22.67 4.5 1 25.17 33 Pass 1908.75 25.78 Horn Ant. 22.02 4.8 1 25.82 33 Pass CDMA /EV-D O/Subt ype2 1851.25 26 Horn Ant. 22.3 4.5 1 25.8 33 Pass 1880 25.78 Horn Ant. 22.33 4.5 1 25.83 33 Pass 1908.75 25.72 Horn Ant. 21.72 4.8 1 25.52 33 Pass Note: a, For getting the EIRP (Efficient Isotropic Radiated Power) in substitution method, the following formula should be taken to calculate it, EIRP [dBm] = SGP [dBm] – Cable Loss [dB] + Gain [dBi] b, SGP=Signal Generator Level RF Test Report of ME906V FCC ID:QISME906V Security Level: Public Report No: SYBH(Z-RF)009122012 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 214 Peak-to-Average Ratio Part I - Test Results Test Band Test Mode Test Channel Measured[dB] Limit [dB] Verdict BC1 CDMA/EV-DO/ Subtype0 LCH 8.4 13 PASS MCH 8.39 13 PASS HCH 8.4 13 PASS RF Test Report of ME906V FCC ID:QISME906V Security Level: Public Report No: SYBH(Z-RF)0…

Text truncated - open the document above for the full version.