QISMT1-U06Mobile Cellular device supporting GSM850, PCS1900, UMTS FDD II/V/IV, 802.11 b/g/n/a, Bluetooth.

Quick Start Guide MateHUAWEI 1 Getting to know your phone Welcome to the brand new world of your HUAWEI Ascend Mate smartphone! Before we begin, let's take a quick look at Mate and its external features. Micro USB port Microphone Power button Volume button HD screen microSD card tray Status indicator Earpiece Proximity sensor Front camera Headset jack Micro-SIM card tray Noise reduction microphone 2 Installing the micro-SIM and microSD cards Only micro-SIM cards are compatible with your Mate. To purchase or replace a micro-SIM card, contact your service provider. Refer to the following figure to install a micro-SIM card. Your Mate supports Class 10 microSD cards. Refer to the following figure to install a microSD card. After you complete these steps, you are ready to use Mate. Press and hold the power button for a few seconds until Mate vibrates to power it on. 3 Using the buttons From any screen, you can: • Touch to return to the previous screen or close the current application if there are no previous screens. • Touch to return to the home screen. • Touch to display recently used applications. • Under , you can enable or disable the hide navigation bar function. When the function is enabled, touch to hide the navigation bar and flick up from the bottom of the screen to display it. • Press the power button once to turn the screen on or off. Press and hold the power button for 10 seconds or more to restart your phone. • Press the power and volume down buttons at the same time to take a screenshot. Recent Return Hide Home Volume button Power button 4 Turning on glove mode Touch to access Settings. Turn on gloves mode, you can then perform touchscreen operations wearing gloves. Touch to turn on gloves mode 5 Performing one-handed operations Touch to access Settings. Touch One-handed operations and select all options. You can then move the keypad and other enabled items to one side of the screen for easier one-handed use . Select the options 6 Displaying suspend windows Touch to access Settings. Turn on Suspend button. A suspend button is then displayed on all screens. Touch the button to display the icons for preset applications. After you open these applications, they will be displayed as suspend windows so that you can switch between them while staying on the same screen . Turn on the suspend button Touch to hide the applications 7 Managing contacts Touch to access People. If you are using your Mate for the first time, tap > Manage contacts to import contacts from a storage device to the phone. Touch the Groups tab to group your contacts for easier management. 8 Making a call Touch to access Phone. Dial the phone number you wish to call or touch to choose someone from your contacts. You can also dial a phone number directly from a message, email, or web page by simply touching the number. 9 Taking a photo Touch to access Camera. Your Mate features a BSI HD camera that lets you take photos in several modes, such as panoramic, beauty, and group. To capture your most attractive smiles, your Mate provides face detection. The camera automatically focuses on certain objects. To focus on a particular object, touch it on the viewfinder. Then, touch to take a photo. Open the settings menu View your photos 10 Recording a video Touch to access Camera, and switch to video mode. Recording in 1080p full HD means stunning image quality and smooth video shots. Touch to begin recording. Open the settings menuView your videos Switch between photo and video modes 11 Viewing photos Touch to access Gallery. Browse photos you have taken and relive those perfect moments. To play your photos in a slideshow, choose an album and touch . To edit a photo, touch > Edit. You can then crop it, adjust its color, apply filters to it, and more. Edit photos 12 Sending an email Touch to access Email. Once you have set up your email accounts, you will be able to stay connected while on the go. 13 Listening to music Touch to access Music. Your Mate features Dolby Digital Plus, which produces superior surround sound through the stereo earphones provided. It makes high-pitched sounds clearer and low-pitched sounds more natural. In addition, the speaker is optimized to provide you with a supreme audio experience. To turn on Dolby surround sound, touch . Play your songs by name, artist, or album, and mark your favorite songs to add them to the Favorites list. Turn Dolby surround sound on or off Mark the current song as a favorite and add it to your Favorites playlist 14 More information Require additional assistance? Touch on your Mate to open Help Center. Want to read the full user guide? Visit www.huaweidevice.com/worldwide to download the HUAWEI Ascend Mate user guide. Your phone supports fast charging, which requires the provided power adapter and USB cable. Using other power adapters or USB cables may cause repeated restarts, extended charging time, excessive heat, device damage, or in extreme cases, an explosion. Note: Do not use the power adapter, headset, USB cable, and other accessories in dusty, damp, or dirty environments. Avoid magnetic fields. If you accidentally expose your phone to water, use a soft cloth to wipe the water off. Make sure your phone is dry before you begin using it. 15 Legal Notice Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei …

Text truncated - open the document above for the full version.

Justification Letter Date (12/04/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby to do the Justification on FCC application: Smart Phone, HUAWEI MT1-U06, MT1-U06, FCC ID: QISMT1-U06 as following: HUAWEI MT1-U06, MT1-U06 is a subscriber equipment in the UMTS/GSM system. The Mobile Phone is supporting GSM four bands, and UMTS/HSDPA/HSUPA band I/II/IV/V. And this mobile phone implements such function as RF signal receiving/transmitting, UMTS/GSM protocol processing, voice, video, MMS service, GPS, AGPS and WIFI etc. It also provides Bluetooth module to synchronize data between a PC and the Phone, or to use the built-in modem of the phone to access the internet with a PC, or to exchange data with other Bluetooth devices. There are two different types of HUAWEI MT1-U06, MT1-U06, One is with NFC function, and its FCC ID is “QISMT1-U06N”, The product in this application without NFC function, and its FCC is “QISMT1- U06”. And all the circuit and PCB layout were identical, so if doesn’t affect all the other RF bands performance. So in this FCC application for HUAWEI MT1-U06, MT1-U06 (FCC ID: QISMT1-U06): New Test report for FCC Part 15B have been submitted, and this report according to Part 15B is valid and applicable and they are representative of the compliance of HUAWEI MT1-U06, MT1-U06. Test data for Bluetooth 2.0 and EDR(DSS part) refer to report “SYBH(Z-RF)007032013-2002”, And this data was refer to report “SYBH(Z-RF)001022013-2002” in FCC application for MT1-U06 (FCC ID: QISMT1-U06N), and this data according to Part 15C remains valid and applicable and they are representative of the compliance of this edition HUAWEI MT1-U06, MT1-U06(without NFC function). Test data for Bluetooth 4.0(DTS part) refer to report “SYBH(Z-RF)007032013-2004”, And this data was refer to report “SYBH(Z-RF)001022013-2004” in FCC application for MT1-U06 (FCC ID: QISMT1-U06N), and this data according to Part 15C remains valid and applicable and they are representative of the compliance of this edition HUAWEI MT1-U06, MT1-U06(without NFC function). Test data for 2.4GHz WLAN(DTS part) refer to report “SYBH(Z-RF)007032013-2003”, And this data was refer to report “SYBH(Z-RF)001022013-2003” in FCC application for MT1-U06 (FCC ID: QISMT1-U06N), and this data according to Part 15C remains valid and applicable and they are representative of the compliance of this edition HUAWEI MT1-U06, MT1-U06(without NFC function). Test data for 5GHz WLAN refer to report “NEI-FCCP-1-1302C057A”, And this data was refer to report “NEI-FCCP-1-1302C057” in FCC application for MT1-U06 (FCC ID: QISMT1-U06N), and this data according to Part 15C and 15E remains valid and applicable and they are representative of the compliance of this edition HUAWEI MT1-U06, MT1-U06(without NFC function). Test data for GSM/UMTS refer to report “SYBH(Z-RF)007032013-2001”, And this data was refer to report “SYBH(Z-RF)001022013-2001” in FCC application for MT1-U06 (FCC ID: QISMT1-U06N), and this data according to Part 22, 24 and 27 remains valid and applicable and they are representative of the compliance of this edition HUAWEI MT1-U06, MT1-U06(without NFC function). New SAR Test report “FA331303B” and previous SAR test report “FA331303A” in FCC application for MT1-U06(FCC ID: QISMT1-U06) to demonstrate this edition HUAWEI MT1-U06, MT1-U06(without NFC function) comply with the SAR requirement. But inside test result was reference from report “FA331303A” in FCC application for MT1-U06(FCC ID: QISMT1-U06), and also this report contain the data for this edition HUAWEI MT1-U06, MT1- U06(without NFC function) at the worse SAR test configuration. So both data according to OET Bulletin No. 65, Supplement C-2001, IEEE 1528-2003, IEEE Std C95.1-1992, KDB941225 D01 v02, KDB941225 D03 v01, KDB941225 D06 v01, KDB447498 D01 v05, KDB 648474 D04 v01, KDB 865664 D01 v01 remains valid and applicable and they are representative of the compliance of this edition HUAWEI MT1-U06, MT1-U06(without NFC function). Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Date (01/04/2013) DD/MM/YYYY BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Bu Cookies Phone: +86-755-88286998 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: FCC ID: QISMT1-U06 This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2013-04-01 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISMT1-U06 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2013-6-25: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

Statements Date (01/04/2013)DD/MM/YYYY BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China Hereby to confirm that our device, FCC ID: QISMT1-U06, is not shipped with the battery pre-installed and the FCC ID is readily visible when users open the product box. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Document Title SECRET Page1,Total 6 External Photos of HUAWEI MT1-U06, MT1-U06 Document Title SECRET Page2,Total 6 Document Title SECRET Page3,Total 6 Document Title SECRET Page4,Total 6 Document Title SECRET Page5,Total 6 Document Title SECRET Page6,Total 6

Document Title SECRET Page1, Total 1 ID Label HUAWEI MT1-U06, MT1-U06 Document Title SECRET Page2, Total 1 Document Title SECRET Page3, Total 1 Document Title SECRET Page4, Total 1

Document Title SECRET Page1,Total 5 Internal Photos of HUAWEI MT1-U06, MT1-U06 Document Title SECRET Page2,Total 5 Document Title SECRET Page3,Total 5 Document Title SECRET Page4,Total 5 Document Title SECRET Page5,Total 5

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 53 TEL : 86-755-8637-9589 Report Issued Date : Apr. 07, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 02 FCC ID : QISMT1-U06 FCC SAR Test Report Report No. : FA331303B FCC SAR Test Report APPLICANT : Huawei Technologies Co., Ltd. EQUIPMENT : Smart Phone BRAND NAME : HUAWEI MODEL NAME : HUAWEI MT1-U06, MT1-U06 FCC ID : QISMT1-U06 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was completely tested on Mar. 08, 2013. We, SPORTON INTERNATIONAL (SHENZHEN) INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (SHENZHEN) INC., the test report shall not be reproduced except in full. Reviewed by: Jones Tsai / Manager SPORTON INTERNATIONAL (SHENZHEN) INC. No. 101, Complex Building C, Guanglong Village, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R.C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 53 TEL : 86-755-8637-9589 Report Issued Date : Apr. 07, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 02 FCC ID : QISMT1-U06 FCC SAR Test Report Report No. : FA331303B Table of Contents 1. Statement of Compliance ..............................................................................................................................................4 2. Administration Data .......................................................................................................................................................5 2.1 Testing Laboratory ...................................................................................................................................................5 2.2 Applicant .................................................................................................................................................................5 2.3 Manufacturer ...........................................................................................................................................................5 2.4 Application Details ...................................................................................................................................................5 3. General Information .......................................................................................................................................................6 3.1 Description of Equipment Under Test (EUT) ...........................................................................................................6 3.2 Maximum RF output power among production units ...............................................................................................7 3.3 Product Photos .......................................................................................................................................................8 3.4 Applied Standard .....................................................................................................................................................8 3.5 Device Category and SAR Limits ............................................................................................................................8 3.6 Test Conditions ........................................................................................................................................................8 4. Specific Absorption Rate (SAR) ....................................................................................................................................9 4.1 Introduction .............................................................................................................................................................9 4.2 SAR Definition .........................................................................................................................................................9 5. SAR Measurement System ..........................................................................................................................................10 5.1 E-Field Probe ........................................................................................................................................................ 11 5.2 Data Acquisition Electronics (DAE) .......................................................................................................................12 5.3 Robot ....................................................................................................................................................................12 5.4 Measurement Server .............................................................................................................................................12 5.5 Phantom ................................................................................................................................................................13 5.6 Device Holder .......................................................................................................................................................13 5.7 Data Storage and Evaluation ................................................................................................................................14 5.8 Test Equipment List ...............................................................................................................................................16 6. Tissue Simulating Liquids ...........................................................................................................................................17 7. SAR System Verification .............................................................................................................................................19 7.1 Purpose …

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B1 of B1 TEL : 86-755-8637-9589 Report Issued Date : Apr. 07, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 02 FCC ID : QISMT1-U06 FCC SAR Test Report Report No. : FA331303B Appendix B. Plots of SAR Measurement The plots are shown as follows. Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 21.02.2013 #86 GSM850_GSM Voice_Left Cheek_Ch251_#2 DUT: MT1-U06 Communication System: Generic GSM; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: HSL_835_130221 Medium parameters used: f = 849 MHz; σ = 0.902 mho/m; ε r = 40.499; ρ = 1000 kg/m 3 Ambient Temperature： 23.6 °C; Liquid Temperature：21.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3819; ConvF(9.56, 9.56, 9.56); Calibrated: 26.11.2012; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1303; Calibrated: 22.11.2012 - Phantom: SAM1; Type: QD000P40CD; Serial: TP:1670 - Measurement SW: DASY52, Version 52.8 (2); SEMCAD X Version 14.6.6 (6824) Ch251/Area Scan (71x131x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.289 W/kg Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.629 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.319 mW/g SAR(1 g) = 0.253 mW/g; SAR(10 g) = 0.193 mW/g Maximum value of SAR (measured) = 0.288 W/kg 0 dB = 0.288 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 07.03.2013 #182 GSM850_GSM Voice_Left Cheek_Ch251_#4 DUT: MT1-U06 Communication System: Generic GSM; Frequency: 848.8 MHz;Duty Cycle: 1:8.3 Medium: HSL_835_130307 Medium parameters used: f = 849 MHz; σ = 0.926 mho/m; ε r = 41.783; ρ = 1000 kg/m 3 Ambient Temperature： 23.3 °C; Liquid Temperature：21.8 °C DASY5 Configuration: - Probe: EX3DV4 - SN3819; ConvF(9.56, 9.56, 9.56); Calibrated: 26.11.2012; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1303; Calibrated: 22.11.2012 - Phantom: SAM1; Type: QD000P40CD; Serial: TP:1670 - Measurement SW: DASY52, Version 52.8 (2); SEMCAD X Version 14.6.6 (6824) Ch251/Area Scan (71x131x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.327 W/kg Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.442 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.366 mW/g SAR(1 g) = 0.297 mW/g; SAR(10 g) = 0.233 mW/g Maximum value of SAR (measured) = 0.334 W/kg 0 dB = 0.334 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 06.02.2013 #05 GSM1900_GSM Voice_Right Cheek_Ch512_#2 DUT: MT1-U06 Communication System: Generic GSM; Frequency: 1850.2 MHz;Duty Cycle: 1:8.3 Medium: HSL_1900_130206 Medium parameters used: f = 1850.2 MHz; σ = 1.369 mho/m; ε r = 40.694; ρ = 1000 kg/m 3 Ambient Temperature： 23.5 °C; Liquid Temperature：21.5 °C DASY5 Configuration: - Probe: EX3DV4 - SN3819; ConvF(7.84, 7.84, 7.84); Calibrated: 26.11.2012; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1303; Calibrated: 22.11.2012 - Phantom: SAM1; Type: QD000P40CD; Serial: TP:1670 - Measurement SW: DASY52, Version 52.8 (2); SEMCAD X Version 14.6.6 (6824) Ch512/Area Scan (71x131x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.124 W/kg Ch512/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.042 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.141 mW/g SAR(1 g) = 0.095 mW/g; SAR(10 g) = 0.060 mW/g Maximum value of SAR (measured) = 0.121 W/kg 0 dB = 0.121 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 07.03.2013 #186 GSM1900_GSM Voice_Right Cheek_Ch512_#4 DUT: MT1-U06 Communication System: Generic GSM; Frequency: 1850.2 MHz;Duty Cycle: 1:8.3 Medium: HSL_1900_130307 Medium parameters used: f = 1850.2 MHz; σ = 1.365 mho/m; ε r = 41.266; ρ = 1000 kg/m 3 Ambient Temperature： 23.4 °C; Liquid Temperature：21.7 °C DASY5 Configuration: - Probe: EX3DV4 - SN3819; ConvF(7.84, 7.84, 7.84); Calibrated: 26.11.2012; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1303; Calibrated: 22.11.2012 - Phantom: SAM2; Type: QD000P40CD; Serial: TP:1671 - Measurement SW: DASY52, Version 52.8 (2); SEMCAD X Version 14.6.6 (6824) Ch512/Area Scan (71x131x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.129 W/kg Ch512/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.867 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.137 mW/g SAR(1 g) = 0.093 mW/g; SAR(10 g) = 0.060 mW/g Maximum value of SAR (measured) = 0.117 W/kg 0 dB = 0.117 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 21.02.2013 #91 WCDMA V_RMC12.2K_Left Cheek_Ch4132_#2 DUT: MT1-U06 Communication System: UMTS; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: HSL_835_130221 Medium parameters used: f = 826.4 MHz; σ = 0.88 mho/m; ε r = 40.716; ρ = 1000 kg/m 3 Ambient Temperature： 23.6 °C; Liquid Temperature：21.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN3819; ConvF(9.56, 9.56, 9.56); Calibrated: 26.11.2012; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1303; Calibrated: 22.11.2012 - Phantom: SAM1; Type: QD000P40CD; Serial: TP:1670 - Measurement SW: DASY52, Version 52.8 (2); SEMCAD X Version 14.6.6 (6824) Ch4132/Area Scan (71x131x1): Interpolated grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.269 W/kg Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.416 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.272 mW/g SAR(1 g) = 0.218 mW/g; SAR(10 g) = 0.168 mW/g Maximum value of SAR (measured) = 0.246 W/kg 0 dB = 0.246 W/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 07.03.2013 #184 WCDMA V_RMC12.2K_Left Cheek_Ch4132_#4 DUT: MT1-U06 Communication System: UMTS; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: HSL_835_130307 Medium parameters used: f = 826.4 MHz; σ = 0.903 m…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C1 of C1 TEL : 86-755-8637-9589 Report Issued Date : Apr. 07, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 02 FCC ID : QISMT1-U06 FCC SAR Test Report Report No. : FA331303B Appendix C. DASY Calibration Certificate The DASY calibration certificates are shown as follows. SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report D835V2, serial No. 4d091 Extended Dipole Calibrations Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D835V2 – serial no. 4d091 ʳ 835 Head 835 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.18.2011 -25.734 ʳ 50.867 ʳ -5.1504ʳ -22.318 ʳ47.082 ʳ -6.8594ʳ 11.17.2012 -25.917 0.7149.7731.09-5.13290.02 -22.4660.6648.683 1.60 -6.35980.50 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report <Dipole Verification Data> - D835V2, serial no. 4d091 835MHz - Head 835MHz – Body SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report D1900V2, serial no. 5d118 Extended Dipole Calibrations Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D1900V2 – serial no. 5d118 1900 Head 1900 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Los s (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.21.2011 -22.535 53.449 6.9277 -22.401 47.82 7.1133 11.17.2012 -22.603 0.3053.491 -0.047.10090.17-22.45 0.2246.14 -1.68 6.7234-0.39 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report <Dipole Verification Data>- D1900V2, serial no. 5d118 1900MHz – Head 1900MHz - Body SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 FCC Test Report D2450V2, serial no. 736 Extended Dipole Calibrationsġ Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary…

Text truncated - open the document above for the full version.