QISMT882ADSL Router

SmartAX MT880 ADSL Router User Manual HUAWEI TECHNOLOGIES CO., LTD. SmartAX MT880 ADSL Router User Manual Issue 01 Date 2007-09-06 No. 103075 Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] Copyright © Huawei Technologies Co., Ltd. 2007. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Safety Precautions General Requirements: z Before you install and use the device, read these safety precautions carefully and observe them during operation. z During storage, transportation and operation of the device, keep the device dry. z During storage, transportation and operation of the device, avoid collision and crash of the device. z Never attempt to dismantle the device by yourself. In case of any fault, contact the appointed maintenance center for repair. z Without prior written consent, no organization or individual is permitted to make any change to the structure or safety design of the device. Huawei Technologies Co., Ltd. is not liable to any consequences or legal issues due to such changes. z While using the device, observe all applicable laws, directives and regulations, and respect the legal rights of other people. Environmental Requirements: z Place the device at a well-ventilated place. Do not dispose the device to direct sunlight. z Keep the device clean and free of dusts. z Place the device on a stable platform. z Do not place any object on top of the device. Otherwise, the device may be too hot during operation. It can even be deformed or damaged by the heavy load. z Keep at least 10 cm between the device and the closest object for heat dissipation. z Do not place the device on or near any object that can easily catch fire, such as something made of rubber. z Keep the device far away from any heat source or bare fire, such as a candle or an electric heater. z Keep the device far away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator. Operating Requirements: z Do no let a child operate the device without guidance. z Do not let a child play with the device or any accessory. Swallowing the accessories may lead to peril. z Use the accessories provided or authorized by the manufacturer only. z The power supply of the device shall meet the requirements of the input voltage of the device. z Before plugging or unplugging any cable, shut down the device and disconnect it from the power supply. z While plugging or unplugging any cable, make sure that your hands are completely dry. z Do not tread on, pull or over-bend any cable. Otherwise, the cable may be damaged, leading to malfunction of the device. z Do not use an old or a damaged power cable. z During lightning weather, stop using the device and disconnect it from the power supply. Unplug the power plug and the ADSL twisted pair, to avoid lightning strike. z If the device is not used for a long time, disconnect it from the power supply and unplug the power plug. z In any of the following cases, stop using the device, disconnect it from the power supply and unplug the power plug immediately: there is smoke emitted from the device, or there is some abnormal noise or smell. Contact the specified maintenance center for repair. z Avoid any object (such as metal shavings) from entering the device from the heat dissipation intakes. z Do not scratch or abrade the shell of the device. This may lead to malfunctions of the device. The shed painting material may also lead to skin allergy. Cleaning Requirements: z Before cleaning the device, stop using it and disconnect it from the power supply. z Use a piece of soft cloth to clean the device. z Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils. This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 文档名称 文档密级 2007-9-24 华为机密，未经许可不得扩散 第1页, 共1页 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase…

Text truncated - open the document above for the full version.

SmartAX MT882 ADSL Router User Manual HUAWEI TECHNOLOGIES CO., LTD. SmartAX MT882 ADSL Router User Manual Issue 01 Date 2007-09-06 No. 103074 Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] Copyright © Huawei Technologies Co., Ltd. 2007. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Safety Precautions General Requirements: z Before you install and use the device, read these safety precautions carefully and observe them during operation. z During storage, transportation and operation of the device, keep the device dry. z During storage, transportation and operation of the device, avoid collision and crash of the device. z Never attempt to dismantle the device by yourself. In case of any fault, contact the appointed maintenance center for repair. z Without prior written consent, no organization or individual is permitted to make any change to the structure or safety design of the device. Huawei Technologies Co., Ltd. is not liable to any consequences or legal issues due to such changes. z While using the device, observe all applicable laws, directives and regulations, and respect the legal rights of other people. Environmental Requirements: z Place the device at a well-ventilated place. Do not dispose the device to direct sunlight. z Keep the device clean and free of dusts. z Place the device on a stable platform. z Do not place any object on top of the device. Otherwise, the device may be too hot during operation. It can even be deformed or damaged by the heavy load. z Keep at least 10 cm between the device and the closest object for heat dissipation. z Do not place the device on or near any object that can easily catch fire, such as something made of rubber. z Keep the device far away from any heat source or bare fire, such as a candle or an electric heater. z Keep the device far away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator. Operating Requirements: z Do no let a child operate the device without guidance. z Do not let a child play with the device or any accessory. Swallowing the accessories may lead to peril. z Use the accessories provided or authorized by the manufacturer only. z The power supply of the device shall meet the requirements of the input voltage of the device. z Before plugging or unplugging any cable, shut down the device and disconnect it from the power supply. z While plugging or unplugging any cable, make sure that your hands are completely dry. z Do not tread on, pull or over-bend any cable. Otherwise, the cable may be damaged, leading to malfunction of the device. z Do not use an old or a damaged power cable. z During lightning weather, stop using the device and disconnect it from the power supply. Unplug the power plug and the ADSL twisted pair, to avoid lightning strike. z If the device is not used for a long time, disconnect it from the power supply and unplug the power plug. z In any of the following cases, stop using the device, disconnect it from the power supply and unplug the power plug immediately: there is smoke emitted from the device, or there is some abnormal noise or smell. Contact the specified maintenance center for repair. z Avoid any object (such as metal shavings) from entering the device from the heat dissipation intakes. z Do not scratch or abrade the shell of the device. This may lead to malfunctions of the device. The shed painting material may also lead to skin allergy. z Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils. 文档名称 文档密级 2007-9-24 华为机密，未经许可不得扩散 第1页, 共1页 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. i Table of Contents Chapter 1 Introduction .....................................................................1 1.1 Functions and Features.........................................................1 1.2 Ap…

Text truncated - open the document above for the full version.

文档名称 文档密级 2007-9-28 华为机密，未经许可不得扩散 第1页, 共1页 1 GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF EUT PRODUCT ADSL CPE MODEL NO. SmartAX MT 882 , SmartAX MT880 POWER SUPPLY Power Adapter, Class II POWER CORD AC output cable(Unshielded, 1.8m) DATA CABLE SUPPLIED USB Cable ( Shielded 1.8m) I/O PORT ADSL Port × 1 Ethernet port ×1 USB port ×1 （For model：SmartAX MT882 only） Note： 1． The EUT have two product names and model name ,which are identical to each other in al aspects except for following : Model Name Difference SmartAX MT882 With USB port SmartAX MT880 Without USB port 2． The EUT must be supplied with a power switching adapter as following: Brand Model No. Spec. TECHNICS TEAC-41-120800U nput:～120VAC 60Hz； Output：～12V AC，0.8A

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R Post ZIP：518129 Page ：1/1 China To: EMCC Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISMT882 to be kept confidential: 1 Block Diagram. 2 Operational description. The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

MT880 External Photo Front View Back View

MT882 External Photo Front View Back View

3 4 . 7 9 . 5 5 R 0 . 5 45 MadeinChina Input:

3 4 . 5 79.5 3 R 0 . 5 45 3

MT880 Internal Photo PCB Solder Side View PCB Component Side View

MT882 Internal Photo PCB Solder Side View PCB Component Side View

Report on EMC Test of ADSL CPE M/N: SmartAX MT882 SmartAX MT880 Report No: SYBH (E)07072007EB Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 89651014 Fax: +86 755 89652518 Report on EMC Test of ADSL CPE SmartAX MT882&MT880 Security Level: for internal use only Report No: SYBH (E) 07072007EB Confidential Information of Huawei. No Distribution without Written Permission Page2, Total20 Notice 1 1. The laboratory has obtained the accreditation of China National Accreditation Committee for Laboratories (CNAL), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. Any copy of the test report is invalid if not re-marked with the "exclusive stamp for the test report". 8. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 9. The test report is invalid if there is any evidence of erasure and/or falsification. 10. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 11. Normally, the test report is only responsible for the samples that have undergone the test. 12. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. 13. In this page, the “laboratory” is “Reliability Laboratory of Huawei Technologies CO., Ltd. “ Report on EMC Test of ADSL CPE SmartAX MT882&MT880 Security Level: for internal use only Report No: SYBH (E) 07072007EB Confidential Information of Huawei. No Distribution without Written Permission Page3, Total20 Notice 2 Modification Information: For original equipment, following table is not applicable. Table 1 Modification Information 1 2 3 4 5 6 Modification Information 7 Report on EMC Test of ADSL CPE SmartAX MT882&MT880 Security Level: for internal use only Report No: SYBH (E) 07072007EB Confidential Information of Huawei. No Distribution without Written Permission Page4, Total20 REPORT ON EMC Test of ADSL CPE M/N: SmartAX MT882 SmartAX MT880 REGULATION FCC CFR47 Part 15 Class B ICES-003 Class B START OF TEST Jul.25, 2007 END OF TEST Jul.27, 2007 Final Judgement: Pass Approver 2007-08-06 张兴海 张兴海张兴海 张兴海 Date Name Signature Reviewer 2007-08-06 余辉 余辉余辉 余辉 Date Name Signature Operator 2007-08-03 周凤云 周凤云周凤云 周凤云 Date Name Signature Report on EMC Test of ADSL CPE SmartAX MT882&MT880 Security Level: for internal use only Report No: SYBH (E) 07072007EB Confidential Information of Huawei. No Distribution without Written Permission Page5, Total20 REPORT BODY CONTENT 1 Status.........................................................................................................................................6 1.1 Product Information ...................................................................................................................6 1.2 Applied Standard........................................................................................................................6 1.3 Test Site .....................................................................................................................................6 1.4 Test environment condition .......................................................................................................6 2 Summary of Results ..................................................................................................................7 3 Equipment Specification............................................................................................................8 3.1 General Description...................................................................................................................8 3.2 Technical Data...........................................................................................................................8 3.3 Sub-Assembly Identity.............................................................................................................10 4 System Configuration during EMC Test..................................................................................10 4.1 Cables Used during Test.........................................................................................................10 4.2 Associated Equipment Used during Test................................................................................10 4.3 Test Configurations for Emission Test ....................................................................................10 4.4 Test conditions and test connections ......................................................................................11 5 Enclosure Port .........................................................................................................................12 5.1 Radiated Disturbance 30MHz to 1000MHz.............................................................................12 6 AC Power Port Tests ...............................................................................................................13 6.1 Conducted Disturbance...........................................................................................................13 7 Syste…

Text truncated - open the document above for the full version.

Report on EMC Test of ADSL CPE SmartAX MT882&MT880 Security Level: for internal use only Report No: SYBH (E) 07072007EB Confidential Information of Huawei. No Distribution without Written Permission Page19, Total20 10 Photographs of Test Set-ups 10.1 Radiated Emissions Radiated Disturbance (30MHz-1GHz) Radiated Disturbance (1GHz-2GHz) Report on EMC Test of ADSL CPE SmartAX MT882&MT880 Security Level: for internal use only Report No: SYBH (E) 07072007EB Confidential Information of Huawei. No Distribution without Written Permission Page20, Total20 10.2 Conducted Emissions Conducted Emissions for AC Power Port ------------------------------------------------------------------------------------------- END