QISP6-U06HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone

Quick Start Guide P6 1 Getting to know your phone Welcome to the brand new world of your HUAWEI Ascend P6 smartphone! Before we begin, let's take a quick look at the P6 and its external features. Micro USB port Micro-SIM card tray Status indicator Earpiece Proximity sensor Front camera Screen Power button Volume button microSD card tray Headset jack Microphone Noise reduction microphone 2 Installing the micro-SIM and microSD cards Only micro-SIM cards are compatible with your P6. To purchase or replace a micro-SIM card, contact your service provider. Insert the micro-SIM card as shown in the following figure. You r P6 supports Class 10 microSD cards. Perform the steps shown in the following figures to install a microSD card. To install the micro-SIM card, first insert the end of a SIM eject tool or paper clip into the hole next to the SIM card tray to open the tray. Then perform the steps shown in the following figures. After you complete these steps, you are ready to use P6. Press and hold the power button for a few seconds until P6 vibrates to power it on. Don't insert or remove the micro-SIM card when your phone is powered on. 1 2 b a m icro SD SI M 3 3 Charging the battery Use the provided USB cable and power adapter to connect your phone to a power outlet, or use the USB cable to connect your phone to a computer. Your phone's built-in battery is not user-removable. To replace the battery, contact an authorized service center. Do not attempt to remove it yourself. 4 Using the buttons From any screen, you can: • Touch to return to the previous screen or exit an application. • Touch to return to the home screen. • Touch to display recently used applications. • Under , you can enable or disable the hide navigation bar function. When the function is enabled, touch to hide the navigation bar and flick up from the bottom of the screen to display it. • Press the power button once to turn the screen on or off. Press and hold the power button for 10 seconds or more to restart your phone. • Press the power and volume down buttons at the same time to take a screenshot. Power button Volume button Recent Home Return Hide 5 More information Need more help using P6? Touch on your P6 to open Help Center. Want to browse the user guide? Visit www.huaweidevice.com/worldwide to download the HUAWEI Ascend P6 User Guide. Note This guide is for reference only. The actual product, including but not limited to the color, size, and screen layout, may vary. All statements, information, and recommendations in this guide do not constitute a warranty of any kind, express or implied. 1 Legal Notice Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Android™ is a trademark of Google Inc. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Other trademarks, product, service and company names mentioned may be the property of their respective owners. 2 Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers. Thus, the descriptions herein may not exactly match the product or its accessories which you purchase. Huawei reserves the right to change or modify any information or specifications contained in this manual without prior notice and without any liability. Third-Party Software Statement Huawei does not own the intellectual property of the third-party software and applications that are delivered with this product. Therefore, Huawei will not provide any warranty of any kind for third party software and applications. Neither will Huawei provide support to customers who use third-party software and applications, nor be responsible or liable for the functions or performance of third-party software and applications. Third-party software and applications services may be interrupted or terminated at any time, and Huawei does not guarantee the availability of any content or service. Third-party service providers provide content and services through network or transmission tools outside of the control of Huawei. To the greatest extent permitted by applicable law, it is explicitly stated that Huawei shall not compensate or be liable for services provided by third- party service providers, or the interruption or termination of third-party contents or services. Huawei shall not be responsible for the legality, quality, or any other aspects of any software installed on this product, or for any uploaded or downloaded third-party 3 works in any form, including but not limited to texts, images, videos, or software etc. Customers shall bear the risk for any and all effects, including incompatibility between the software and this product, which result from installing software or uploading or downloading the third-party works. This product is based on the open-source Android™ platform. Huawei has made necessary changes to the platform. Therefore, this product may not support all the functions that are suppor…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2013/5/08 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISP6-U06 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure KDB Inquiry Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2013-11-6: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

External Photos of HUAWEI P6-U06, P6-U06 SECRET Page1,Total 4 External Photos of HUAWEI P6-U06, P6-U06 External Photos of HUAWEI P6-U06, P6-U06 SECRET Page2,Total 4 External Photos of HUAWEI P6-U06, P6-U06 SECRET Page3,Total 4 External Photos of HUAWEI P6-U06, P6-U06 SECRET Page4,Total 4

Document Title SECRET Page1, Total 4 ID Label HUAWEI P6-U06, P6-U06 Document Title SECRET Page2, Total 4 Document Title SECRET Page3, Total 4 Document Title SECRET Page4, Total 4

Document Title SECRET Page1,Total 5 Internal Photos of HUAWEI P6-U06, P6-U06 Document Title SECRET Page2,Total 5 Document Title SECRET Page3,Total 5 Document Title SECRET Page4,Total 5 Document Title SECRET Page5,Total 5

Report No.:SYBH(Z-SAR)021042013-2 IC: 6369A-P6U06 FCC ID:QISP6-U06 Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D835-EX-Head SystemPerformanceCheck-D835-EX- Body SystemPerformanceCheck-D1800-EX-Head SystemPerformanceCheck-D1800-EX-Body SystemPerformanceCheck-D1900-EX-Head SystemPerformanceCheck-D1900-EX-Body SystemPerformanceCheck-D1900-EX-Body SystemPerformanceCheck-D2450-EX-Head SystemPerformanceCheck-D2450-EX-Body Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Head DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d126 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.907 S/m; ε r = 41.778; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(9.01, 9.01, 9.01); Calibrated: 2012-4-26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/d=15mm,pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.42 W/kg Configuration/d=15mm,pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.314 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.45 W/kg SAR(1 g) = 2.39 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (measured) = 2.57 W/kg 0 dB = 2.42 W/kg = 3.84 dBW/kg Date: 2013-4- 25 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Body DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d126 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.953 S/m; ε r = 55.062; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(8.98, 8.98, 8.98); Calibrated: 2012-4- 26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11- 22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/d=15mm,pin=250mW/Area Scan (7x16x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 2.41 W/kg Configuration/d=15mm,pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 50.458 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 3.52 W/kg SAR(1 g) = 2.4 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 2.59 W/kg 0 dB = 2.41 W/kg = 3.81 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1800-EX-Head DUT: Dipole 1800 MHz D1800V2; Type: D1800V2; Serial: D1800V2 - SN:2d184 Communication System: CW; Frequency: 1800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1800 MHz; σ = 1.433 S/m; ε r = 41.269; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.19, 8.19, 8.19); Calibrated: 2013-1-14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/d=10mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.7 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 85.437 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 20.2 W/kg SAR(1 g) = 10 W/kg; SAR(10 g) = 5.02 W/kg Maximum value of SAR (measured) = 11.2 W/kg 0 dB = 11.2 W/kg = 10.49 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1800-EX-Body DUT: Dipole 1800 MHz D1800V2; Type: D1800V2; Serial: D1800V2 - SN:2d184 Communication System: CW; Frequency: 1800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1800 MHz; σ = 1.543 S/m; ε r = 53.029; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1-14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/d=10mm, Pin=250mW/Area Scan (7x13x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.1 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 81.397 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 18.0 W/kg SAR(1 g) = 9.69 W/kg; SAR(10 g) = 5.01 W/kg Maximum value of SAR (measured) = 10.9 W/kg 0 dB = 10.9 W/kg = 10.39 dBW/kg Date: 2013-4-23 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Head DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.454 S/m; ε r = 41.456; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(7.67, 7.67, 7.67); Calibrated: 2012-4-26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/d=10mm, Pin=250mW/Area Scan (8x12x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 10.2 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 79.906 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 19.5 W/kg SAR(1 g) = 9.68 W/kg; SAR(10 g) = 4.81 W/kg Maximum value of SAR (measured) = 10.9 W/kg 0 dB = 10.2 W/kg = 10.09 dBW/kg Date: 2013-5-7 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Body DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: CW; Freque…

Text truncated - open the document above for the full version.

Report No.:SYBH(Z-SAR)021042013-2 IC:6369A-P6U06 FCC ID:QISP6-U06 Appendix B. SAR Measurement Plots Table of contents GSM850 Head GSM850 Body GSM1900 Head GSM1900 Body UMTS Band V Head UMTS Band V Body UMTS Band IV Head UMTS Band IV Body UMTS Band II Head UMTS Band II Body WiFi 802.11b Head WiFi 802.11b Body Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 GSM850 190CH Left hand touch cheek DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-GSM\GPRS\EGPRS-1TS; Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.911 S/m; ε r = 41.775; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(9.01, 9.01, 9.01); Calibrated: 2012-4- 26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.253 W/kg Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.727 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.325 W/kg SAR(1 g) = 0.246 W/kg; SAR(10 g) = 0.182 W/kg Maximum value of SAR (measured) = 0.263 W/kg 0 dB = 0.263 W/kg = -5.80 dBW/kg Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 GSM850 190CH Left hand tilt 15 degree DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-GSM\GPRS\EGPRS-1TS; Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.911 S/m; ε r = 41.775; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(9.01, 9.01, 9.01); Calibrated: 2012-4- 26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.198 W/kg Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.754 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.238 W/kg SAR(1 g) = 0.196 W/kg; SAR(10 g) = 0.152 W/kg Maximum value of SAR (measured) = 0.204 W/kg 0 dB = 0.204 W/kg = -6.90 dBW/kg Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 GSM850 190CH Right hand touch cheek DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-GSM\GPRS\EGPRS-1TS; Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.911 S/m; ε r = 41.775; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(9.01, 9.01, 9.01); Calibrated: 2012-4- 26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.330 W/kg Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.520 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.403 W/kg SAR(1 g) = 0.327 W/kg; SAR(10 g) = 0.250 W/kg Maximum value of SAR (measured) = 0.343 W/kg 0 dB = 0.343 W/kg = -4.64 dBW/kg Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 GSM850 190CH Right hand tilt 15 degree DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-GSM\GPRS\EGPRS-1TS; Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.911 S/m; ε r = 41.775; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(9.01, 9.01, 9.01); Calibrated: 2012-4- 26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.180 W/kg Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.866 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 0.216 W/kg SAR(1 g) = 0.180 W/kg; SAR(10 g) = 0.143 W/kg Maximum value of SAR (measured) = 0.188 W/kg 0 dB = 0.188 W/kg = -7.26 dBW/kg Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 GSM850 251CH Right hand touch cheek DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-GSM\GPRS\EGPRS-1TS; Frequency: 848.8 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 849 MHz; σ = 0.916 S/m; ε r = 41.489; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3736; ConvF(9.01, 9.01, 9.01); Calibrated: 2012-4- 26; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.334 W/kg Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.540 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 0.407 W/kg SAR(1 g) = 0.330 W/kg; SAR(10 g) = 0.252 W/kg Maximum value of SAR (measured) = 0.347 W/kg 0 dB = 0.347 W/kg = -4.60 dBW/kg Date: 2013-4-20 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 GSM850 128CH Right hand touch cheek DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-GSM\GPRS\EGPRS-1TS; Frequency: 824.2 MHz;Duty Cycle: 1:8.30042 Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.896 S/m; ε r = 41.881; ρ = 1000 k…

Text truncated - open the document above for the full version.

Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 UMTS Band IV 1312CH Towards Ground 15mm DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-UMTS-FDD; Frequency: 1712.4 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.461 S/m; ε r = 53.395; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1- 14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.633 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.903 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.652 W/kg; SAR(10 g) = 0.385 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.717 W/kg 0 dB = 0.717 W/kg = -1.44 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 UMTS Band IV 1413CH Towards Ground 15mm with battery 2# DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-UMTS-FDD; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1733 MHz; σ = 1.475 S/m; ε r = 53.305; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1- 14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.765 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.035 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.762 W/kg; SAR(10 g) = 0.456 W/kg Maximum value of SAR (measured) = 0.825 W/kg 0 dB = 0.825 W/kg = -0.83 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 UMTS Band IV 1513CH Towards Phantom 10mm DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-UMTS-FDD; Frequency: 1752.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1753 MHz; σ = 1.494 S/m; ε r = 53.223; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1- 14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.904 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.618 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 1.57 W/kg SAR(1 g) = 0.863 W/kg; SAR(10 g) = 0.446 W/kg Maximum value of SAR (measured) = 0.957 W/kg 0 dB = 0.957 W/kg = -0.19 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 UMTS Band IV 1413CH Towards Phantom 10mm DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-UMTS-FDD; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1733 MHz; σ = 1.475 S/m; ε r = 53.305; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1- 14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.955 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.362 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.64 W/kg SAR(1 g) = 0.914 W/kg; SAR(10 g) = 0.470 W/kg Maximum value of SAR (measured) = 1.03 W/kg 0 dB = 1.03 W/kg = 0.13 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 UMTS Band IV 1413CH Towards Phantom 10mm-repeated DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-UMTS-FDD; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1733 MHz; σ = 1.475 S/m; ε r = 53.305; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1- 14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2012-11-22 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.4(1052); SEMCAD X 14.6.8(7028) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.925 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.420 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.61 W/kg SAR(1 g) = 0.895 W/kg; SAR(10 g) = 0.456 W/kg Maximum value of SAR (measured) = 1.02 W/kg 0 dB = 1.02 W/kg = 0.07 dBW/kg Date: 2013-4-27 Test Laboratory: HUAWEI SAR/HAC Lab P6-U06 UMTS Band IV 1312CH Towards Phantom 10mm DUT: HUAWEI P6-U06, P6-U06; Type: Smart Phone; Serial: SAR1 Communication System: HW-UMTS-FDD; Frequency: 1712.4 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1712.4 MHz; σ = 1.461 S/m; ε r = 53.395; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3898; ConvF(8.04, 8.04, 8.04); Calibrated: 2013-1- 14; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE…

Text truncated - open the document above for the full version.

Justification of the extended calibration of Dipole D835V2 SN: 4d126 Referred to 450824 D02 Dipole SAR Validation Verification v01, Published on Nov 17 2009, Otherwise, according to the IEEE Standard 1528a-2005 recommended annual calibration is expected, when happened as below the following: 1) When the most recent return-loss, measured at least annually, deviates by more than 20% from the previous measurement (i.e. 0.2 of the dB value) or not meeting the required -20 dB return-loss specification; 2) When the most recent measurement of the real or imaginary parts of the impedance, measured at least annually, deviates by more than 5 Ω from the previous measurement. Dipole835 Head TST Target Value Measured Value Difference Impedance transformed to feed point 52.2Ω-2.4jΩ 50.4Ω+1.17jΩ R=-1.8Ω, X=3.57Ω Return Loss - 30.0dB -31.73dB -5.77% Dipole835 Body TST Target Value Measured Value Difference Impedance transformed to feed point 47.8Ω-4.4jΩ 50.36Ω-0.85jΩ R=2.56Ω, X=3.55Ω Return Loss -25.9dB -27.3dB -5.41% Measure Data 2011-11-07 2012-09-13 -- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

Justification of the extended calibration of Dipole D1800V2 SN: 2d184 Per KDB 450824, we have Measured the Impedance and Return Loss as below, and the return loss is <-20dB, with 20% of prior calibration; the real or imaginary parts of the impedance is with 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole1800 Head TST Target Value Measured Value Difference Impedance transformed to feed point 49.7Ω-2.3jΩ 50.08Ω-2.27jΩ R=38Ω, X=0.03Ω Return Loss -32.8dB -33.14dB -1.04% Dipole1800 Body TST Target Value Measured Value Difference Impedance transformed to feed point 45.3Ω-2.3jΩ 45.230Ω-2.36jΩ R=0.07Ω, X=-0.06Ω Return Loss -25.2dB -25.39dB -0.75% Measured Date 2011-03-08 2013-03-07 ----- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

Justification of the extended calibration of Dipole D1900V2 SN:5d143 Referred to 450824 D02 Dipole SAR Validation Verification v01, Published on Nov 17 2009, Otherwise, according to the IEEE Standard 1528a-2005 recommended annual calibration is expected, when happened as below the following: 1) When the most recent return-loss, measured at least annually, deviates by more than 20% from the previous measurement (i.e. 0.2 of the dB value) or not meeting the required -20 dB return-loss specification; 2) When the most recent measurement of the real or imaginary parts of the impedance, measured at least annually, deviates by more than 5 Ω from the previous measurement. Dipole1900 Head TST Target Value Measured Value Difference Impedance transformed to feed point 53.5Ω+5.8jΩ 50.8Ω+8.57jΩ R=-2.7Ω, X=2.77Ω Return Loss - 23.7dB -24.16dB -1.94% Dipole1900 Body TST Target Value Measured Value Difference Impedance transformed to feed point 48.4Ω+6.1jΩ 45.78Ω+3.17jΩ R=-2.62Ω, X=-2.93Ω Return Loss -23.9dB -25.3dB -5.86% Measure Data 2011-09-26 2012-09-13 -- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC&IC SAR Compliance Test Report Project Name: _______________________ Model : _______________________ FCC ID : ______________…

Text truncated - open the document above for the full version.