QISRRU3232-3650Remote Radio Unit of Distributed Base Station

Huawei Technologies Co.,Ltd

Click to zoom

Application Details

Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Date of Grant: Jun 01, 2014
Application Purpose: Original Equipment
Date of Application: May 29, 2014
Equipment Note: Remote Radio Unit of Distributed Base Station
Frequency Range: 3650.00000000 - 3675.00000000
Company: Huawei Technologies Co.,Ltd
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

DBS3900(ICR) Installation Guide Issue01 Date2011-03-30 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email:[email protected] Issue 01 (2011-03-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Purpose This document describes the procedures for installing the DBS3900 devices on the Indoor Centralized Rack (ICR). Product Version The following table lists the product versions related to this document. Product NameProduct Version DBS3900V100R004 DBS3900 WCDMAV200R013 DBS3900 LTEV100R003C00 DBS3900 GSMV100R013 Intended Audience This document is intended for: lBase station installation engineers Organization 1 Changes in the DBS3900 (ICR) Installation Guide 2 Installation Preparations This chapter describes the tools and instruments required for installation and the skills and prerequisites required for onsite installation engineers. DBS3900(ICR) Installation GuideAbout This Document Issue 01 (2011-03-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii 3 Information About the Installation This chapter describes the information about the installation, including exterior, installation scenario, and space requirements 4 Unpacking the Equipment Unpack and check the delivered equipment to ensure that all the materials are included and intact. 5 Obtaining the ESN The Electronic Serial Number (ESN) is a unique identifier of a Network Element (NE). Record the ESN for later commissioning of the base station before installation. 6 Installation Process This section describes the process of installing the DBS39000 on the ICR. 7 Assembling the IFS06 This chapter describes the procedure for assembling the IFS06. 8 Installing the IFS06 This chapter describes the procedure for installing the IFS06 on the concrete floor and ESD floor. 9 Installing the Main Bracket for the RRU This chapter describes the procedure for installing the main bracket for the DC RRU and AC RRU. 10 Installing the GPS Surge Protector This chapter describes the procedure for installing the GPS surge protector. 11 Installing the IMB03 This chapter describes the procedure for installing the IMB03. 12 Installing the Equipotential Cable and PGND Cable This chapter describes the procedures for installing the equipotential cable and PGND cable. 13 Installing Devices in the IMB03 This chapter describes the installation of the devices in the IMB03. 14 Installing the RRU This section describes the procedure for installing the AC RRU and DC RRU. 15 Installing Cables This chapter describes the procedure for installing all the cables. 16 Checklist for the DBS3900 Hardware Installation This section describes the checklist for the DBS3900 hardware installation. 17 Performing the DBS3900 Power-On Check After all devices are installed, you need to check the power-on status of the BBU and RRU. 18 Installing the Cover Plate for the IMB03 About This Document DBS3900(ICR) Installation Guide ivHuawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue 01 (2011-03-30) This section describes the procedure for installing the cover plate for the IMB03. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. SymbolDescription Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. General Conventions The general conventions that may be found in this document are defined as follows. ConventionDescription Times New RomanNormal paragraphs are in Times New Roman. BoldfaceNames of files, directories, folders, and users are in boldface. For example, log in as user root. ItalicBook titles are in italics. Courier New Examples of information displayed on the screen are in Courier New. Command Conventions The command conventions that may be found in this document are defined as follows. ConventionDescription BoldfaceThe keywords of a command line are in boldface. ItalicCommand arguments are in italics. DBS3900(ICR) Installation GuideAbout This Document Issue 01 (2011-03-30)Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. v ConventionDescription [ ]Items (keywords or arguments) in bracket…

Text truncated - open the document above for the full version.

Users Manual

Regulatory Compliance Statement RRU3232 0682 Issue 02 Date 2014-5-8 HUAW EI TECHNOLOGIES CO., LTD. Issue (02) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] 1 Regulatory Compliance Statement Issue (02) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1-1 1 Regulatory Compliance Statement About This Chapter 1.1 Declaration of Conformity to European Directives Declaration of Conformity to European Directives 1 Regulatory Compliance Statement 1-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (02) Figure 1-1 Declaration of Conformity to European Directives 2 Regulatory Compliance Information Issue (02) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-3 2 Regulatory Compliance Information About This Chapter 2.1 Regulatory Compliance Standards 2.2 European Regulatory Compliance 2.3 U.S.A Regulatory Compliance 2.4 Japanese Regulatory Compliance 2.5 CISPR 22 Compliance 2.1 Regulatory Compliance Standards The Product complies with the standards listed in Table 2-1. Table 2-1 Regulatory compliance standards Discipline Standards EMC z CISPR22 Class B z CISPR24 z EN55022 Class B z EN50024 z ETSI EN 301 489 Class B z CFR 47 FCC Part 15 Class B z FCC Part 2 z FCC Part 27 z ICES 003 Class B z AS/NZS CISPR22 Class B z GB9254 Class B z VCCI Class B z CNS 13438 Class B z IEC/EN 61000-6-1 z IEC/EN 61000-6-2 z IEC/EN 61000-6-3 z IEC/EN 61000-6-4 2 Regulatory Compliance Information 2-4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (02) Discipline Standards Safety z IEC 60950-1 z IEC/EN60215 z IEC/EN41003 z EN 60950-1 z UL 60950-1 z UL 60950-22 z CSA C22.2 No 60950-1 z AS/NZS 60950.1 z BS EN 60950-1 z IS 13252 z GB4943 z GB8898 Laser safety z FDA rules, 21 CFR 1040.10 and 1040.11 z IEC60825-1, IEC60825-2, EN60825-1, EN60825-2 z GB7247 RF z ETSI EN 301 908-1 z ETSI EN 301 908-14 z ETSI EN 301 908-20 z ETSI EN 302 544-1 Health z ICNIRP Guideline z 1999-519-EC z EN 50385 z OET Bulletin 65 z IEEE Std C95.1 z EN 60215 Environmental protection z 2002/95/EC & 2011/65/EU (RoHS) z EC NO. 1907/2006 (REACH) z 2002/96/EC&2012/19/EU(WEEE) Grounding z ITU-T K.27 z ETSI EN 300 253 2 Regulatory Compliance Information Issue (02) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-5 Discipline Standards Note: EMC: electromagnetic compatibility NEBS: Network Equipment Build Standard RF: radio frequency CISPR: International Special Committee on Radio Interference EN: European Standard ETSI: European Telecommunications Standards Institute CFR: Code of Federal Regulations FCC: Federal Communication Commission IEC: International Electrotechnical Commission AS/NZS: Australian/New Zealand Standard VCCI: Voluntary Control Council for Interference CNS: Chinese National Standard UL: Underwriters Laboratories CSA: Canadian Standards Association BS: British Standard IS: Indian Standard GR: general requirement FDA: Food and Drug Administration BTS: base transceiver station GSM: Global System for Mobile communications WLAN: wireless local area network ICNIRP: International Commission on Non-Ionizing Radiation Protection OET: Office of Engineering Technology IEEE: Institute of Electrical and Electronics Engineers RoHS: restriction of the use of certain hazardous substances 2.2 European Regulatory Compliance The Product complies with the following European directives and regulations. z 2004/108/EC (EMC) z 2006/95/EC (low voltage) z 1999/5/EC (R&TTE) z 2002/95/EC & 2011/65/EU (RoHS) z EC NO. 1907/2006 (REACH) z 2002/96/EC&2012/19/EU (WEEE) The Product complies with Directive 2002/95/EC, 2011/65/EU and other similar regulations from the countries outside the European Union, on the RoHS in electrical and electronic 2 Re gulatory Compliance Information 2-6 Hua wei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (02) equipm ent. The device does not contain lead, mercury, cadmium, and hexavalent chromium and brominated flame retardants (Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE)) except for those exempted applications allowed by RoHS directive for technical reasons. Product complies with Regulation EC NO. 1907/2006 (REACH) and other similar regulations from the countries outside the European Union. Huawei will notify to the European Chemical Agency (ECHA) or the customer when necessary and regulation requires. Product complies with Directive 2002/96/EC&2012/19/EU on waste electrical and electronic equipment (WEEE). Huawei is responsi…

Text truncated - open the document above for the full version.

Attestation Statements

only works in the with FCC ID number Huawei Technologies Co. Ltd. 2014-5-9 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 ATTESTATION STATEMENT Declaration on CPE work frequency TO WHOM IT MAY CONCERN We, Huawei Technologies Co., Ltd., declare on our sole responsibility that the model This device frequency band 3650-3675MHZ through setting the operation frequency in the software. Signature: Zhang, Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. Add: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86-755-2897-0299 Fax: +86-755-8965-0226 RRU 32 32 QISRRU3232- 3650

Cover Letter(s)

Huawei Technologies Co., Ltd. Add: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86-755-2897-0299 Fax: +86-755-8965-0226 Date: 2014-5-9 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of confidentiality for FCC ID: QIS RRU3232-3650 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Huawei Technologies Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Huawei Technologies Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Circuit Description 3 Schematic 4 Part List & Tune-up Procedure SHORT-TERM 5 External and Internal Photos 6 Test-Setup Photos 7 User Manual The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Signature: Zhang, Xinghai EMC Laboratory Manager

Cover Letter(s)

1.1 Restricted Protocol Description RRU3232 is a LTE CPE works on TDD 3.6GHz (3650~3675MHz). It provides LTE access for user device connected with Ethernet and Wi-Fi link. , RRU3232 is a LTE client device. The transmitter and receiver works as LTE eNodeB required according to LTE TDD protocol 3GPP release 9. The following synchronized TDD framing diagram is used to allow satisfactory sharing of the spectrum with similar systems. As refer in <3GPP TS 36.211>, frame structure type 2 is applicable to TDD. Each radio frame of length ms 10307200 sf TT consists of two half-frames of length ms 5153600 s T each. Each half-frame consists of five subframes of length ms 107203 s T . The supported uplink-downlink configurations are listed in Table 1-1 where, for each subframe in a radio frame, “D” denotes the subframe is reserved for downlink transmissions, “U” denotes the subframe is reserved for uplink transmissions and “S” denotes a special subframe with the three fields DwPTS, GP and UpPTS. The length of DwPTS and UpPTS is given by Table 1-1 subject to the total length of DwPTS, GP and UpPTS being equal to ms 107203 s T . Each subframe i is defined as two slots, i2 and 12i of length ms 5.015360 sslot TT in each subframe. Uplink-downlink configurations with both 5 ms and 10 ms downlink-to-uplink switch-point periodicity are supported. In case of 5 ms downlink-to-uplink switch-point periodicity, the special subframe exists in both half-frames. In case of 10 ms downlink-to-uplink switch-point periodicity, the special subframe exists in the first half-frame only. Subframes 0 and 5 and DwPTS are always reserved for downlink transmission. UpPTS and the subframe immediately following the special subframe are always reserved for uplink transmission. One slot, T slot =15360T s GP UpPT S DwPTS One radio frame, T f = 307200T s = 10 ms One half-frame, 153600T s = 5 ms 30720T s One subframe, 30720T s GP UpPT S DwPTS Subframe #2Subframe #3Subframe #4Subframe #0Subframe #5Subframe #7Subframe #8Subframe #9 Figure 1-1 Frame structure type 2 (for 5 ms switch-point periodicity). Special subframe configuration Normal cyclic prefix in downlink Extended cyclic prefix in downlink DwPTS UpPTS DwPTS UpPTS Normal cyclic prefix in uplink Extended cyclic prefix in uplink Normal cyclic prefix in uplink Extended cyclic prefix in uplink 0 s 6592T s 2192T s 2560T s 7680T s 2192T s 2560T 1 s 19760T s 20480T 2 s 21952T s 23040T 3 s 24144T s 25600T 4 s 26336T s 7680T s 4384T s 5120T 5 s 6592T s 4384T s 5120T s 20480T 6 s 19760T s 23040T 7 s 21952T - - - 8 s 24144T - - - Table 1-1 Configuration of special subframe (lengths of DwPTS/GP/UpPTS) The TDD system Uplink-downlink configuration is as follows: Uplink-downlink configuration Downlink-to-Uplink Switch-point periodicity Subframe number 0 1 2 3 4 5 6 7 8 9 0 5 ms D S U U U D S U U U 1 5 ms D S U U D D S U U D 2 5 ms D S U D D D S U D D 3 10 ms D S U U U D D D D D 4 10 ms D S U U D D D D D D 5 10 ms D S U D D D D D D D 6 5 ms D S U U U D S U U D Table 1-2 Uplink-downlink configurations RRU3232 is TDD system and the supporting special subframe configuration is including 5 and 7. And the supporting Uplink-downlink configuration is including 0, 1 and 2. RRU3232 support the configuration in blue in above tables. OFDM has been adopted as the downlink transmission scheme for the 3GPP Long-Term Evolution (LTE). As TDD LTE system, RRU3232 downlink transmission scheme is also based on OFDM. Transmission by means of OFDM can be seen as a kind of multi-carrier transmission. The „physical resource‟ in case of OFDM transmission is often illustrated as a time-frequency grid according to Figure 1-2 where each „column‟ corresponds to one OFDM symbol and each „row‟ corresponds to one OFDM subcarrier. Figure 1-2 OFDM time-frequency grids In contrast to the kind of multi-carrier transmission, any corruption of the frequency-domain structure of the OFDM subcarriers, e.g. due to a frequency selective radio channel, may lead to a loss of inter-subcarrier orthogonality and thus to interference between subcarriers. To handle this and to make an OFDM signal truly robust to radio-channel frequency selectivity, cyclic-prefix insertion is typically used. To deal with this problem and to make an OFDM signal truly insensitive to time dispersion on the radio channel, so-called cyclic-prefix insertion is typically used in case of OFDM transmission. As illustrated in Figure 1-3, cyclic-prefix insertion implies that the last part of the OFDM symbol is copied and inserted at the beginning of the OFDM symbol. Cyclic-prefix insertion thus increases the length of the OFDM symbol from Tu to Tu +Tcp, where Tcp is the length of the cyclic prefix, with a corresponding reduction in the OFDM symbol rate as a consequence. Figure 1-1 Cyclic-prefix insertion Cyclic-prefix insertion is beneficial in the sense that it makes an OFDM signal insensitive to time dispersion as long as the span of the time dispersion does not exceed the length of the cyclic prefix. In general, there is a trade-off between the power loss due to the cyclic prefix and the signal corruption (inter-symbol and inter-subcarrier interference) due to residual time dispersion not covered by the cyclic prefix and, at a certain point, further reduction of the signal corruption due to further increase of the cyclic-prefix length will not justify the corresponding additional power loss. This also means that, although the amount of time dispersion typically increases with the cell size, beyond a certain cell size there is often no reason to increase the cyclic prefix further as the corresponding power loss due to a further increase of the cyclic prefix would have a larger negative impact, compared to the signal corruption due to the residual time dispersion not covered by the cyclic prefix Due to the relatively long OFDM symbol time in combination with a cyclic prefix, OFDM provides a high degree of robustness against channel fr…

Text truncated - open the document above for the full version.

External Photos

Photo documentation of External of RRU3232

Internal Photos

Photo documentation of Internal of RRU3232

RF Exposure Info

Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 Document No: SYBH(R) 01324917EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 2 Declaration of Electromagnetic Field Health Compliance for RRU3232 To whom it may concern, As to the product RRU3232 made by Huawei Technologies Co., Ltd., we declare that it complies with the Basic restrictions/Reference levels for electric, magnetic and electromagnetic fields as specified in following standards(s): 1 RSS-102 (Issue4, March 2010) 2 OET Bulletin 65 (Edition 97-01) The compliance is demonstrated based on the following calculation model assessment: 1. The power density according to far-field model is: Where: P = input power of the antenna. G = antenna gain relative to an isotropic antenna. , = elevation and azimuth angles. R = distance from the antenna to the point of investigation. 2. For single or multiple RF sources, the calculated power density should comply with following: 1 ,   i iLimit i S S Where: i S = the power density when the f is i . iLimit S , = the reference level requirement for power density when f is i . 3. The calculation of the power density or safe distance is: NOTE 1: The RF exposure evaluation is base on the far-field and the radiation exposure is over-estimated. NOTE 2: The maximum output power level is taken into account as a worst case for the purpose of the calculation of power density or safe distance. NOTE 3: The minimum antenna feed cable loss (assumed no cable loss) is taken into account as a worst case for the purpose of the calculation of power density or safe distance. 2 ),( 4R GP S      Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 Document No: SYBH(R) 01324917EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 2 NOTE 4: The maximum antenna radiation exposure orientation and maximum antenna gain is taken into account as a worst case for the purpose of the calculation of power density or safe distance. RF Source Calculation RF Source #1 f = 3650 to 3675MHz iLimit S , = 10 2 W/m P = 0.0944W (= 19.75 dBm, measured max at each antenna) ),( G = 39.81(= 16dBi) ),( GPEIRP = 3.758 W , = The worst condition is considered, i.e. the max G is used. i S = 2 ),( 4R GP     =0.299 2 /R 2 W/m iLimit i S S , = 0.0299 / 2 R RF Source #2 (same as RF source #1) RF Source #3 (same as RF source #1) RF Source #4 (same as RF source #1) RF Source(s) Combination  i iLimit i S S , = 4*0.0299 / 1 2 R R  0.35 m (the minimum Safe Distance) Person responsible for making this declaration: Signature : Print Name : Liang Changguan Position/Title : RF Engineer Date : May 15, 2014

Test Report

RF Test Report Product Name: Remote Radio Unit of Distributed Base Station Product Model: RRU3232 Report Number: SYBH(R)01324917EB-1 FCC ID: QISRRU3232-3650 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of RRU3232 FCC ID: QISRRU3232-3650 Security Level: Public Report No: SYBH(R)01324917EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 17 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The site recognition number is 6369A-1. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers are R2364, C2583, and T256. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of RRU3232 FCC ID: QISRRU3232-3650 Security Level: Public Report No: SYBH(R)01324917EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 17 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Product Name: Remote Radio Unit of Distributed Base Station Product Model: RRU3232 Version: V100R006 Date of Receipt Sample: 2014-04-30 Start Date of Test: 2014-05-05 End Date of Test: 2014-05-12 Test Result: Pass Approved by Senior Engineer: 2014-05-14 Zhang Xinghai Date Name Signature Prepared by: 2014-05-14 Liang Changguan Date Name Signature RF Test Report of RRU3232 FCC ID: QISRRU3232-3650 Security Level: Public Report No: SYBH(R)01324917EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 17 Modification Record No. Last Report No. Modification Description --- --- --- RF Test Report of RRU3232 FCC ID: QISRRU3232-3650 Security Level: Public Report No: SYBH(R)01324917EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 17 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 3 Description of the Equipment under Test (EUT) ..................................................................................................... 8 3.1 General Description ................................................................................................................................... 8 3.2 EUT Identity ............................................................................................................................................... 8 …

Text truncated - open the document above for the full version.

Contact Information

Applicant

Zhang Xinghai

[email protected]+86-755-2897-0299Fax: +86-755-8965-0226

Test Firm

Huawei Technologies Co., LTDZhou Fengyum

[email protected]86-755-28782917Fax: 86-755-89650226

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
1	90	3.65 GHz - 3.67 GHz	13.34 W	20M0W7D	0.0050000000 ppm

Confidentiality

Long Term

Grant Notes

Power output listed is combined EIRP. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307.