QISRRU3260Remote Radio Unit

RRU3260 Installation Guide Issue Date HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] Issue ()Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Purpose This document describes the process of installing a DC RRU3260 (referred to as RRU in this document). Product Versions The following table lists the product versions related to this document. Product NameProduct Version DBS3900V100R008C00 and later versions DBS3900 LTEV100R006C00 and later versions Intended Audience This document is intended for: Base station installation engineers Organization 1 Changes in the RRU3260 Installation Guide This chapter describes the changes in the RRU3260 Installation Guide. 2 Installation Preparations This chapter describes the reference documents, tools, and instruments that must be ready before the installation. In addition, it specifies the skills and prerequisites that installation engineers must have. 3 Information About the Installation Before installing an RRU, you must be familiar with its exterior, ports, indicators, installation options and installation clearance requirements. 4 Unpacking the Equipment RRU3260 Installation GuideAbout This Document Issue ()Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii This chapter describes how to unpack and check the delivered equipment to ensure that all the materials are included and intact. 5 Installation Process The installation process involves installing an RRU and RRU cables, checking the RRU hardware installation, and powering on the RRU. 6 (Optional) Installing the Plastic Shells of the RRU This section describes the procedure for installing the plastic shells of the RRU. 7 Hoisting an RRU and Related Cables onto a Tower This section describes the procedure for hoisting an RRU and related cables onto a tower and the precautions that must be taken. 8 Installing the RRU This chapter describes the procedure for installing the RRU. The RRU can be installed on a pole, U-steel, angle steel, wall, or an IFS06 . The procedure for installing the RRU varies depending on installation options. 9 Installing RRU Cables This chapter describes the procedure for installing RRU cables. 10 Checking the RRU Hardware Installation After an RRU is installed, check the hardware installation. 11 Powering On an RRU After all the devices are installed, check the power-on status of an RRU. 12 Appendix This section describes the procedure for adding an easy power receptacle (pressfit type) connector. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level or medium level of risk which, if not avoided, could result in death or serious injury. Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation that, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. RRU3260 Installation GuideAbout This Document Issue ()Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii SymbolDescription Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. General Conventions The general conventions that may be found in this document are defined as follows. ConventionDescription Times New RomanNormal paragraphs are in Times New Roman. BoldfaceNames of files, directories, folders, and users are in boldface. For example, log in as user root. ItalicBook titles are in italics. Courier New Examples of information displayed on the screen are in Courier New. Command Conventions The command conventions that may be found in this document are defined as follows. Convention Description BoldfaceThe keywords of a command line are in boldface. ItalicCommand arguments are in italics. [ ]Items (keywords or arguments) in brackets [ ] are optional. { x | y | ... }Optional items are grouped in braces and separated by vertical bars. One item is selected. [ x | y | ... ]Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. { x | y | ... } * Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. [ x | y | ... ] * Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected. GUI Conventions The GUI conventions that may be found in t…

Text truncated - open the document above for the full version.

Date (29/08/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Culture Creative Park, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Felix Li Phone: +86-755-88286998-3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Type of equipment: Remote Radio Unit Model name: RRU3260 FCC ID: QISRRU3260 This authorization expires one year from the current date. Sincerely, EMC lab manager: Zhang Xinghai Telephone Number: +86 -755-89651014 Fax: +86 -755-89652518 E-mail: [email protected]

Date (29/08/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: QISRRU3260 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, we Velodyne Acoustics, Inc., 345 Digital Drive Morgan Hill, California 95037 United States hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics and PCB layout Parts List Block Diagrams Operational Description Tune-up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, EMC lab manager: Zhang Xinghai Telephone Number: +86 -755-89651014 Fax: +86 -755-89652518 E-mail: [email protected]

文档名称 文档密级 2013-7-29 华为保密信息,未经授权禁止扩散 第1页, 共2页 Equipment Photographs Supplement File Name Description Phote-01 RRU3260 module top side Phote-02 RRU3260 module bottom side Phote-03 Board component side of RRU3260 RRU3260 module top side 文档名称 文档密级 2013-7-29 华为保密信息,未经授权禁止扩散 第2页, 共2页 RRU3260 module bottom side Board component side of RRU3260

Label location Label location

文档名称 文档密级： 2013-7-29 华为机密，未经许可不得扩散 第1页, 共2页 Photo of internal of RRU3260 Internal Photographs （Total 2 Pages including this Cover Page） Supplement filename Description Photo-01 Internal View-Top Photo-02 Internal View-Bottom Photo-01 Internal View –TOP 文档名称 文档密级： 2013-7-29 华为机密，未经许可不得扩散 第2页, 共2页 Photo-02 Internal View –BOTTOM

Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 Document No: SYBH(R)00991729EA-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 2 Declaration of FCC MPE Compliance for RRU3260 To whom it may concern, As to the product RRU3260 made by Huawei Technologies Co., Ltd., we declare that it complies with the Basic restrictions/Reference levels for electric, magnetic and electromagnetic fields as specified in following standards(s): Nr. Standard 1 47CFR FCC Part 1 (10-1-12 Edition) 2 OET Bulletin 65 (Edition 97-01) The compliance is demonstrated based on the following calculation model assessment: 1. The power density according to far-field model is: 2 ),( 4R GP S      Where: P = input power of the antenna. G = antenna gain relative to an isotropic antenna. , = elevation and azimuth angles. R = distance from the antenna to the point of investigation. 2. For single or multiple RF sources, the calculated power density should comply with following: 1 ,   i iLimit i S S Where: i S = the power density when the f is i . iLim it S , = the reference level requirement for power density when f is i . 3. The calculation of the power density or safe distance is: NOTE 1: The RF exposure evaluation is base on the far-field and the radiation exposure is over-estimated. NOTE 2: The maximum output power level is taken into account as a worst case for the purpose of the calculation of power density or safe distance. Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 Document No: SYBH(R)00991729EA-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 2 NOTE 3: The minimum antenna feed cable loss (assumed no cable loss) is taken into account as a worst case for the purpose of the calculation of power density or safe distance. NOTE 4: The maximum antenna radiation exposure orientation and maximum antenna gain is taken into account as a worst case for the purpose of the calculation of power density or safe distance. RF Source Calculation RF Source #1 f = 2620 to 2690 MHz iLim it S , = 10 2 W/m P = 86.5 W ( measured max) ),( G = 63.09 (= 18 dBi) , = The worst condition is considered, i.e. the max G is used. i S = 2 ),( 4R GP     = 434.49 2 /R 2 W/m iLim it i S S , = 43.449 / 2 R RF Source(s) Combination  i iLimit i S S , = 43.449 / 1 2 R R  6.6 m (the minimum Safe Distance) Person responsible for making this declaration: Signature : Print Name : Huang Yuanqiu Position/Title : RF Engineer Date : July 25, 2013

RF Test Report Product Name: Remote Radio Unit Product Model: RRU3260 Report Number: SYBH(R)00991729EB-1 FCC ID: QISRRU3260 IC ID: 6369A-RRU3260 Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of RRU3260 FCC ID: QISRRU3260, IC ID: 6369A-RRU3260 Security Level: Public Report No: SYBH(R)00991729EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 21 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1 and 6369A-3. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers of test site No.1 are R-2364, G-415, C-2583, and T-256, and the accreditation numbers of test site No.2 are R-3760, G-485, C-4210 and T-1237. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of RRU3260 FCC ID: QISRRU3260, IC ID: 6369A-RRU3260 Security Level: Public Report No: SYBH(R)00991729EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 21 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Product Name: Remote Radio Unit Product Model: RRU3260 Date of Receipt Sample: 2013-07-05 Start Date of Test: 2013-07-06 End Date of Test: 2013-07-24 Test Result: Pass Approved by Senior Engineer: 2013-07-26 Zhang Xinghai Date Name Signature Prepared by: 2013-07-25 Huang Yuanqiu Date Name Signature RF Test Report of RRU3260 FCC ID: QISRRU3260, IC ID: 6369A-RRU3260 Security Level: Public Report No: SYBH(R)00991729EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 21 Modification Record No. Last Report No. Modification Description 1 --- First report. RF Test Report of RRU3260 FCC ID: QISRRU3260, IC ID: 6369A-RRU3260 Security Level: Public Report No: SYBH(R)00991729EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 21 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 2.1 BRS&EBS Band (2620-2690 MHz with 2500-2570 MHz) .......................................................................... 7 3 Description of the Equipment under Test (EUT) ..................................................................................................... 9 3.1 General Description ................................................................................................................................... 9 3.2 EUT Identity ............................................................................................................................................... 9 3.3 Technical Specification ............................................................................................................................ 10 4 General Test Conditions / Configurations ............................................................................................................. 12 4.1 Test Modes .............................................................................................................................................. 12 4.2 EUT Configurations .................................................................................................................................. 13 4.3 Test Environments ................................................................................................................................... 15 4.4 Test Setups .............................................................................................................................................. 16 4.5 Test Conditions ........................................................................................................................................ 18 5 Main Test Instruments .......................................................................................................................................... 20 6 Measurement Uncertainty..................................................................................................................................... 21 RF Test Report of RRU3260 FCC ID: QISRR…

Text truncated - open the document above for the full version.