QISRRU3942Multi-mode Multi-carriers Remote Radio Unit

RRU3942 Installation Guide Issue Date HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] Issue ()Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i About This Document Purpose This document describes the process of installing a DC RRU3942 (referred to as RRU in this document). Product Version The following table lists the product version related to this document. Product NameProduct Version DBS3900V100R004C00 and later versions Intended Audience This document is intended for: Base station installation engineers Organization 1 Changes in the RRU3942 Installation Guide This chapter describes the changes in the RRU3942 Installation Guide. 2 Installation Preparations This chapter describes the reference documents, tools, and instruments that must be ready before the installation. In addition, it specifies the skills and prerequisites that installation engineers must have. 3 Information About the Installation Before installing an RRU, you must be familiar with its exterior, ports, installation options, physical supports, and installation clearance requirements. 4 Unpacking the Equipment Unpack and check the delivered equipment to ensure that all the materials are included and intact. RRU3942 Installation GuideAbout This Document Issue ()Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii 5 Installation Process The installation process involves installing an RRU and RRU cables, checking the RRU hardware installation, and powering on the RRU. 6 Installing the RRU This chapter describes the procedure for installing the RRU. The RRU can be installed on a pole, U-steel, angle steel, or wall. The procedure for installing the RRU varies depending on installation options. 7 Installing RRU Cables This chapter describes the procedure for installing RRU cables. 8 Checking the RRU Hardware Installation After an RRU is installed, check the hardware installation. 9 Powering On an RRU After all the devices are installed, check the power-on status of an RRU. 10 Appendix This section describes the procedure for adding an easy power receptacle (pressfit type) connector. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. General Conventions The general conventions that may be found in this document are defined as follows. RRU3942 Installation GuideAbout This Document Issue ()Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii ConventionDescription Times New RomanNormal paragraphs are in Times New Roman. BoldfaceNames of files, directories, folders, and users are in boldface. For example, log in as user root. ItalicBook titles are in italics. Courier New Examples of information displayed on the screen are in Courier New. Command Conventions The command conventions that may be found in this document are defined as follows. ConventionDescription BoldfaceThe keywords of a command line are in boldface. ItalicCommand arguments are in italics. [ ]Items (keywords or arguments) in brackets [ ] are optional. { x | y | ... }Optional items are grouped in braces and separated by vertical bars. One item is selected. [ x | y | ... ]Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected. { x | y | ... } * Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. [ x | y | ... ] * Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected. GUI Conventions The GUI conventions that may be found in this document are defined as follows. Convention Description BoldfaceButtons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK. >Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder. Keyboard Operations The keyboard operations that may be found in this document are defined as follows. RRU3942 Installation GuideAbout This Docu…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2012-01-05 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISRRU3942 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. y Schematic diagram y Block Diagram y Parts list (BOM) Information y Operational description y Tune-up procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing for 180 days after the date the grant of equipment authorization is issued: y External Photos y Internal Photos y Test Setup Photos y Users Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

文档名称 文档密级： 2011-12-17 华为机密，未经许可不得扩散 第1页, 共4页 Pictures of RRU3942 Figure 1-1 Front view of RRU3942 文档名称 文档密级： 2011-12-17 华为机密，未经许可不得扩散 第2页, 共4页 Figure 1-2 One Side view of RRU3942 文档名称 文档密级： 2011-12-17 华为机密，未经许可不得扩散 第3页, 共4页 Figure 1-3 Another Side view of RRU3942 文档名称 文档密级： 2011-12-17 华为机密，未经许可不得扩散 第4页, 共4页 Figure 1-4 Rear view of RRU3942

文档名称 文档密级： 2011-12-16 华为机密，未经许可不得扩散 第1页, 共2页 RRU3942 文档名称 文档密级： 2011-12-16 华为机密，未经许可不得扩散 第2页, 共2页

文档名称 文档密级： 2011-12-28 华为机密，未经许可不得扩散 第1页, 共2页 Photo ducumengtation of internal of RRU3942 Internal Photographs （Total 2 Pages including this Cover Page） Supplement filename Description Photo-01 Internal View-Top Photo-02 Internal View-Bottom Photo-01 Internal View –TOP 文档名称 文档密级： 2011-12-28 华为机密，未经许可不得扩散 第2页, 共2页 Photo-02 Internal View –BOTTOM

FCC Electromagnetic Field Health Compliance Report Product Name: Multi-mode Multi-carriers Remote Radio Unit Product Model: RRU3942 Report Number: SYBH(R)001012012EB-2 FCC ID: QISRRU3942 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Electromagnetic Field Health Compliance Report of RRU3942 V100R004 FCC ID: QISRRU3942 Security Level: Public Report No: SYBH(R)001012012EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 14 Notice 1. The laboratory has passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The site recognition number is 6369A-1. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers are R2364, C2583, and T256. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. FCC Electromagnetic Field Health Compliance Report of RRU3942 V100R004 FCC ID: QISRRU3942 Security Level: Public Report No: SYBH(R)001012012EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 14 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Product Name: Multi-mode Multi-carriers Remote Radio Unit Product Model: RRU3942 Version: V100R004 Date of Receipt Sample: 2011-12-09 Start Date of Test: 2011-12-12 End Date of Test: 2011-12-30 Result: Compliant Approved by Senior Engineer: 2012-01-01 Zhang Xinghai Date Name Signature Prepared by: 2012-01-01 Huang Yuanqiu Date Name Signature FCC Electromagnetic Field Health Compliance Report of RRU3942 V100R004 FCC ID: QISRRU3942 Security Level: Public Report No: SYBH(R)001012012EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 14 Modification Record No. Last Report No. Modification Description --- --- --- --- --- --- --- --- --- FCC Electromagnetic Field Health Compliance Report of RRU3942 V100R004 FCC ID: QISRRU3942 Security Level: Public Report No: SYBH(R)001012012EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 14 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location.............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Description of the Equipments/Site under Estimation ............................................................................................. 7 2.1 General Description ................................................................................................................................... 7 2.2 Technical Description ................................................................................................................................. 7 3 Electromagnetic Field Health Requirements ........................................................................................................... 8 3.1 FCC Routine Environmental Evaluation ..................................................................................................... 8 3.2 Maximum Permissible Exposure (MPE) ................................................................................................... 10 4 Electromagnetic Field Health Estimation .............................................................................................................. 11 4.1 Calculation Model..................................................................................................................................... 11 4.2 Cylindrical Boundary Model and Safe Distance ....................................................................................... 11 4.3 Location of Antennas ............................................................................................................................... 12 4.4 Calculation of the Power Density or Safe Distance .................................................................................. 13 FCC Electromagnetic Field Health Compliance Report of RRU3942 V100R004 FCC ID: QISRRU3942 Security Level: Public Report No: SYBH(R)001012012EB-2 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 14 1 General Information 1.1 Applied Standard Applied Rules: 47CFR FCC Part 1 Test Method: OET Bulletin 65 (Edition 97-01) 1.2 Test Location Test Location 1: Reliability Laboratory of Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China 1.3 Test Environment Condition Ambient Temperature: Not applicable Ambient Relative Humidity: Not applicable Atmos…

Text truncated - open the document above for the full version.

RF Test Report Product Name: Multi-mode Multi-carriers Remote Radio Unit Product Model: RRU3942 Report Number: SYBH(R)001012012EB-1 FCC ID: QISRRU3942 IC ID: 6369A-RRU3942 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of RRU3942 V100R004 FCC ID: QISRRU3942, IC ID: 6369A-RRU3942 Security Level: Public Report No: SYBH(R)001012012EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 20 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The site recognition number is 6369A-1. 5. The laboratory has been listed by the VCCI to perform EMC measurements. The accreditation numbers are R2364, C2583, and T256. 6. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 7. The test report is invalid if there is any evidence of erasure and/or falsification. 8. The test report is only valid for the test samples. 9. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of RRU3942 V100R004 FCC ID: QISRRU3942, IC ID: 6369A-RRU3942 Security Level: Public Report No: SYBH(R)001012012EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 20 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Product Name: Multi-mode Multi-carriers Remote Radio Unit Product Model: RRU3942 Version: V100R004 Date of Receipt Sample: 2011-12-09 Start Date of Test: 2011-12-12 End Date of Test: 2011-12-30 Test Result: Pass Approved by Senior Engineer: 2012-01-01 Zhang Xinghai Date Name Signature Prepared by: 2012-01-01 Huang Yuanqiu Date Name Signature RF Test Report of RRU3942 V100R004 FCC ID: QISRRU3942, IC ID: 6369A-RRU3942 Security Level: Public Report No: SYBH(R)001012012EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 20 Modification Record No. Last Report No. Modification Description --- --- --- --- --- --- --- --- --- RF Test Report of RRU3942 V100R004 FCC ID: QISRRU3942, IC ID: 6369A-RRU3942 Security Level: Public Report No: SYBH(R)001012012EB-1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 20 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location.............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 3 Description of the Equipment under Test (EUT) ..................................................................................................... 8 3.1 General Description ................................................................................................................................... 8 3.2 EUT Identity ............................................................................................................................................... 8 3.3 Technical Description ................................................................................................................................. 9 4 General Test Conditions / Configurations ............................................................................................................. 10 4.1 Test Modes .............................................................................................................................................. 10 4.2 Test Configurations .................................................................................................................................. 10 4.3 Test Environments ................................................................................................................................... 11 4.4 Test Setups .............................................................................................................................................. 12 4.5 Test Conditions ........................................................................................................................................ 14 5 Test Results .......................................................................................................................................................... 18 6 Main Test Instruments .......................................................................................................................................... 19 7 Measurement Uncertainty ..................................................................................................................................... 20 RF Test Report of RRU3942 V100R004 FCC ID: QISRRU3942, IC ID: 6369A-RRU3942 Security Level: Public Report No: …

Text truncated - open the document above for the full version.