QISRU3832Remote Radio Unit

RU3832&RU3632 Hardware Description Issue 03 Date 2014-01-20 HUAWEI TECHNOLOGIES CO., LTD. Issue 03 (2014-01-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] RRU3832&RRU3632 Hardware Description About This Document Issue 03 (2014-01-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii About This Document Purpose This document provides reference for planning and deploying DC blade RU3832 and RU3632 (referred to as RU in this document). It presents the exterior and describes the ports, functions, cable types, connector specifications, and cable connections of the RU. Product Versions The following table lists the product versions related to this document for RU3832. Product Name Solution Version Product Version DBS3900 SRAN6.0 and later versions V100R004C00 and later versions RAN13.0 and later versions V200R013C00 and later versions eRAN6.0 and later versions V100R006C00 and later versions The following table lists the product versions related to this document for RU3632. Product Name Solution Version Product Version DBS3900  SRAN8.0 and later versions  eRAN6.0 and later versions V100R008C00 and later versions Intended Audience This document is intended for:  Base station installation engineers  System engineers  Site maintenance engineers RRU3832&RRU3632 Hardware Description About This Document Issue 03 (2014-01-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii Organization 1 Changes in RU3832&RU3632 Hardware Description This chapter describes the changes in RU3832&RU3632 Hardware Description. 2 RU Introduction This chapter describes the exterior and function of the RU as well as the ports and indicators on the RU. 3 RU Cables This chapter describes RU cables. 4 RF Cable Connections for the RU3832&RU3632 RF cable connections for the RU vary depending on the configurations of the RU and antenna. 5 RU Auxiliary Devices This chapter describes RU auxiliary devices. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. RRU3832&RRU3632 Hardware Description About This Document Issue 03 (2014-01-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iv General Conventions Convention Description Times New Roman Normal paragraphs are in Times New Roman. Boldface Names of files, directories, folders, and users are in boldface. For example, log in as user root. Italic Book titles are in italics. Courier New Terminal display is in Courier New. Command Conventions Convention Description Boldface The keywords of a command line are in boldface. Italic Command arguments are in italics. [ ] Items (keywords or arguments) in square brackets [ ] are optional. { x | y | ... } Alternative items are grouped in braces and separated by vertical bars. One is selected. [ x | y | ... ] Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected. { x | y | ... } * Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected. GUI Conventions Convention Description Boldface Buttons, menus, parameters, tabs, windows, and dialog titles are in boldface. For example, click OK. > Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder. Keyboard Operation Format Description Key Press the key. For example, press Enter and press Tab. RRU3832&RRU3632 Hardware Description About This Document Issue 03 (2014-01-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. v Format Description Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt+A means the three keys should be pressed concurrently. Key 1, Key 2 Press the keys in turn. For ex…

Text truncated - open the document above for the full version.

RU3832&RU3632 Installation Guide Issue 05 Date 2014-06-30 HUAWEI TECHNOLOGIES CO., LTD. Issue 05 (2014-06-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: [email protected] RRU3832&RRU3632 Installation Guide About This Document Issue 05 (2014-06-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii About This Document Purpose This document describes the process of installing DC blade RU3832 and RU3632 (referred to as RU in this document). Product Versions The following table lists the product versions related to this document for RU3832. Product Name Solution Version Product Version DBS3900 SRAN6.0 and later versions V100R004C00 and later versions RAN13.0 and later versions V200R013C00 and later versions eRAN6.0 and later versions V100R006C00 and later versions The following table lists the product versions related to this document for RU3632. Product Name Solution Version Product Version DBS3900  SRAN8.0 and later versions  eRAN6.0 and later versions V100R008C00 and later versions Intended Audience This document is intended for: Base station installation engineers RRU3832&RRU3632 Installation Guide About This Document Issue 05 (2014-06-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii Organization 1 Changes in the RU3832&RU3632 Installation Guide This chapter describes the changes in the RU3832&RU3632 Installation Guide. 2 Installation Preparations This chapter describes the reference documents, tools, and instruments that must be ready before the installation. In addition, it specifies the skills and prerequisites that installation engineers must have. 3 Information About the Installation Before installing an RU, you must be familiar with its exterior, ports, indicators, installation options and installation clearance requirements. 4 Unpacking the Equipment This chapter describes how to unpack and check the delivered equipment to ensure that all the materials are included and intact. 5 Installation Process The installation process involves installing an RU and RU cables, checking the RU hardware installation, and powering on the RU. 6 (Optional) Installing the Plastic Shells of the RU This section describes the procedure for installing the plastic shells of the RU. 7 Hoisting an RU and Related Cables onto a Tower This section describes the procedure for hoisting an RU and related cables onto a tower and the precautions that must be taken. 8 Installing the RU This chapter describes the procedure for installing the RU. The procedure for installing the RU varies depending on installation options. 9 Installing RU Cables This chapter describes the procedure for installing RU cables. 10 Checking the RU Hardware Installation After an RU is installed, check the hardware installation. 11 Powering On an RU After all the devices are installed, check the power-on status of an RU. 12 Appendix This section describes the procedure for adding an easy power receptacle (pressfit type) connector. RRU3832&RRU3632 Installation Guide About This Document Issue 05 (2014-06-30) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iv Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. General Conventions Convention Description Times New Roman Normal paragraphs are in Times New Roman. Boldface Names of files, directories, folders, and users are in boldface. For example, log in as user root. Italic Book titles are in italics. Courier New Terminal display is in Courier New. Command Conventions Convention Description Boldface The keywords of a command line are in boldface. Italic Command arguments are in italics. RRU3832&RRU3632 Installation Guide About This Document Issue 05 (2014-06-30) Huawei Proprietary and Confidential Copyright © Huawei Technolo…

Text truncated - open the document above for the full version.

Regulatory Compliance Statement RU3832 0682 Issue 01 Date 2014-9-1 HUAWEI TECHNOLOGIES CO., LTD. Issue (01) HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the propert y of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] 1 Regulatory Compliance Statement Issue (01)HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1-1 1Regulatory Compliance Statement About This Chapter 1.1 Declaration of Conformity to European Directives Declaration of Conformityto European Directives 1 Regulatory Compliance Statement 1-2HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) Figure 1-1Declaration of Conformity to European Directives 2 Regulatory Compliance Information Issue (01)HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-3 2Regulatory Compliance Information About This Chapter 2.1 Regulatory Compliance Standards 2.2 European Regulatory Compliance 2.3U.S.A Regulatory Compliance 2.4 Canada Regulatory Compliance 2.5 Japanese Regulatory Compliance 2.6 CISPR 22 Compliance 2.7 CISPR 22 Compliance 2.8 India RoHS hazardous substance table 2.9 other markets 2.1Regulatory Compliance Standards The Product complies with the standards listed in Table 2-1. Table 2-1Regulatory compliance standards 2 Regulatory Compliance Information 2-4HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) DisciplineStandards EMC z CISPR22 Class B z CISPR24 z EN55022 Class B z EN50024 z ETSI EN 301 489 Class B z CFR 47 FCC Part 15 Class B z ICES 003 Class B z AS/NZS CISPR22 Class B z GB9254 Class B z VCCI Class B z CNS 13438 Class B z IEC/EN 61000-6-1 z IEC/EN 61000-6-2 z IEC/EN 61000-6-3 z IEC/EN 61000-6-4 Safety z IEC 60950-1 z IEC/EN60215 z IEC/EN41003 z EN 60950-1 z UL 60950-1 z UL 60950-22 z CSA C22.2 No 60950-1 z AS/NZS 60950.1 z BS EN 60950-1 z IS 13252 z GB4943 z GB8898 Laser safety z FDA rules, 21 CFR 1040.10 and 1040.11 z IEC60825-1, IEC60825-2, EN60825-1, EN60825-2 z GB7247 RF z ETSI EN 301 908-1 z ETSI EN 301 908-3 z ETSI EN 301 908-14 z FCC Part 2 z FCC Part 27 2 Regulatory Compliance Information Issue (01)HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2-5 DisciplineStandards Health z ICNIRP Guideline z 1999-519-EC z EN 50385 z OET Bulletin 65 z IEEE Std C95.1 z EN 60215 Environmental protection z 2002/95/EC & 2011/65/EU (RoHS) z EC NO. 1907/2006 (REACH) z 2002/96/EC&2012/19/EU(WEEE) Grounding z ITU-T K.27 z ETSI EN 300 253 Note: EMC: electromagnetic compatibility NEBS: Network Equipment Build Standard RF: radio frequency CISPR: International Special Committee on Radio Interference EN: European Standard ETSI: European Telecommunications Standards Institute CFR: Code of Federal Regulations FCC: Federal Communication Commission IEC: International Electrotechnical Commission AS/NZS: Australian/New Zealand Standard VCCI: Voluntary Control Council for Interference CNS: Chinese National Standard UL: Underwriters Laboratories CSA: Canadian Standards Association BS: British Standard IS: Indian Standard GR: general requirement FDA: Food and Drug Administration BTS: base transceiver station GSM: Global System for Mobile communications WLAN: wireless local area network ICNIRP: International Commission on Non-Ionizing Radiation Protection OET: Office of Engineering Technology IEEE: Institute of Electrical and Electronics Engineers RoHS: restriction of the use of certain hazardous substances 2 Regulatory Compliance Information 2-6HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) 2.2 European Regulatory Compliance The Product complies with the following European directives and regulations. z 2004/108/EC (EMC) z 2006/95/EC (low voltage) z 1999/5/EC (R&TTE) z 2002/95/EC & 2011/65/EU (RoHS) z EC NO. 1907/2006 (REACH) z 2002/96/EC&2012/19/EU (WEEE) The Product complies with Directive 2002/95/EC, 2011/65/EU and other similar regulations from the countries outside the European Union, on the RoHS in electrical and electronic equipment. The device does not contain lead, mercur y, cadmium, and hexavalent chromium and brominated flame retardants (Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE)) except for those exempted applications allowed by RoHS directive for technical reasons. Product complies with Regulation EC NO. 1907/2006 (REACH) and other similar regulations from the countries outside t he Eur opean Uni on. Huawei will notify to the E uropean Chemi cal Agency (ECHA) or the customer when necessary and regulation requires. Product complies with Directive 2002/96/EC&2012/19/EU on waste electrical …

Text truncated - open the document above for the full version.

Compliance and Safety Manual RU3832 Issue 01 Date 2014-9-1 HUAWEI TECHNOLOGIES CO., LTD. Issue (01) HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:http://www.huawei.com Email:[email protected] 1 Safety Issue (01)HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1-1 1Safety About This Chapter 1.1 Health and Safety 1.2 Equipment Safety 1.3 Electromagnetic Field Exposure 1.1 Health and Safety 1.1.1 Overview 1.1.2 Electrical Safety 1.1.3 Inflammable Environment 1.1.4 Radiation 1.1.5 Working at Heights 1.1.6 Mechanical Safety 1.1.7 Bundling Signal Cables 1.1.1 Overview Introduction This section describes the safety precautions you must take before installing or maintaining Huawei equipment. z To ensure safety of humans and the equipment, pay attention to the safety symbols on the equipment and all the safety instructions in this document. z The "NOTE", "CAUTION", and "WARNING" marks in other documents do not represent all the safety instructions. They are only supplements to the safety instructions. z Installation and maintenance personnel must understand basic safety precautions to avoid hazards. z When operating Huawei equipment, in addition to following the general precautions in this document, follow the specific safety instructions given by Huawei. 1 Safety 1-2HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Issue (01) z Only trained and qualified personnel are allowed to install, operate, and maintain Huawei equipment. z To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authorit y to operate this equipment. Local Safety Regulations When operating Huawei equipment, you must follow the local laws and regulations. The safety instructions in this document are only supplements to the local laws and regulations. General Requirements To minimize risk of personal injury and damage to equipment, read and follow all the precautions in this document before performing any installation or maintenance. Ensure that the instructions provided in this document are followed completely. This section also provides guidelines for selecting the measuring and testing devices. Installation z The device (or system) must be installed in an access-controlled location. z Tighten the thumbscrews by using a tool after initial installation and subsequent access to the panel. Ground z Do not damage the ground conductor or operate the device in the absence of a properly installed ground conductor. Conduct the electrical inspection carefully. z The device (or system) must be connected permanently to the protection ground before an operation. The cross-sectional area of the protective ground conductor must be at least 16mm 2 . z The device must be fixed securely on the floor or other reliable objects, such as the walls and the mounting racks before operation. z When installing the unit, always make the ground connection first and disconnect it last Power Supply z For DC-supplied model: The device applies to DC power source that complies with the Safety Extra-Low Voltage (SELV) requirements in IEC 60950-1 based safety standards. z Prepared conductors are connected to the terminal block, and only the appropriate AWG/Type of wire is secured with the lug terminals. z This device relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 80 VDC, 30A for DC supplied model is used on the phase conductors (all current-carrying conductors). z For this device, a readily accessible disconnect device shall be incorporated external to the equipment 1 Safety Issue (01)HuaweiProprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 1-3 z To minimize the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Human Safety z Do not operate the device or cables during lightning strikes. z To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telecommunication network voltage (TNV) circuits. z Move or lift the chassis by holding its lower edge. Do not hold the handles on certain modules such as power supply, fans, and boards because they cannot support the weight of the device. z Do not look into the optical port without eye protection. z Do not wear jewelry or watches when you operate the device. z Reinforced insulation or double insulation must be provided to isolate DC source from AC mains supply. Operator z Only qualified professional personnel are allowed to install, configure, operate, and disassemble th…

Text truncated - open the document above for the full version.

Date (11/09/2014) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Culture Creative Park, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Felix Li Phone: +86-755-88286998-3243 e-mail:[email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Type of equipment: Remote Radio Unit Model name: RU3832 FCC ID: QISRU3832 This authorization expires one year from the current date. Sincerely, EMC lab manager:Zhang Xinghai Telephone Number: +86 -755-28970299 Fax: +86 -755-89650226 E-mail: [email protected]

Date (11/09/2014) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: QISRU3832 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, we Velodyne Acoustics, Inc., 345 Digital Drive Morgan Hill, California 95037 United States hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics and PCB layout Parts List Block Diagrams Operational Description Tune-up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, EMC lab manager:Zhang Xinghai Telephone Number: +86 -755-28970299 Fax: +86 -755-89650226 E-mail: [email protected]

Date (24/09/2014) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir/Madam, RE: Modular Approval Request for Model: RU3832 FCC ID: QISRU3832 The following attestation addresses the requirements to support modular approval: Modular approval requirementYesNo * (a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Yes (b)The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes (c)The module must containpower supply regulation on the module Yes (d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes (e)The module must demonstrate compliance in a stand-alone configuration Yes (f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes (g)The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Yes (h) The module must comply with RF exposure requirements Yes * Please provide a detailed explanation if the answer is “No.” Kind Regards EMC lab manager:Zhang Xinghai

芉ᱟ舮⛠芉ᱟ芴㓗˖ 2014-9-24 ॾѪᵪᇶˈᵚ㓿䇨ਟнᗇᢙᮓᅮ2亥,ޡ4亥 Photo documentation of External of RU3832 芉ᱟ舮⛠芉ᱟ芴㓗˖ 2014-9-24 ॾѪᵪᇶˈᵚ㓿䇨ਟнᗇᢙᮓᅮ3亥,ޡ4亥 芉ᱟ舮⛠芉ᱟ芴㓗˖ 2014-9-24 ॾѪᵪᇶˈᵚ㓿䇨ਟнᗇᢙᮓᅮ4亥,ޡ4亥

芉ᱟ舮⛠芉ᱟ芴㓗 2014-9-24 ॾѪ؍ᇶؑ᚟,ᵚ㓿ᦸᵳ韋→ᢙᮓᅮ1亥,ޡ1亥 Label Location

芉ᱟ舮⛠芉ᱟ芴㓗˖ 2014-9-24 ॾѪᵪᇶˈᵚ㓿䇨ਟнᗇᢙᮓᅮ1亥,ޡ4亥 Photo documentation of Internal of RU3832

Declaration for Compliance with EMF for RRU3832 Security Level: Public Document No.: SYBH(R)01486578EA-4 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 2 Declaration of Electromagnetic Field Health Compliance for RU3832 LTE AWS Band To whom it may concern, As to the product RU3832 made by Huawei Technologies Co., Ltd., we declare that it complies with the Basic restrictions/Reference levels for electric, magnetic and electromagnetic fields as specified in following standards(s): Nr. Standard 1 47CFR FCC Part 1 (10-1-13 Edition) & OET Bulletin 65 2 RSS-102 (Issue4, March 2010) The compliance is demonstrated based on the following calculation model assessment: 1. The power density according to far-field model is: 2 ),( 4R GP S      Where: P = input power of the antenna. G = antenna gain relative to an isotropic antenna. , = elevation and azimuth angles. R = distance from the antenna to the point of investigation. 2. For single or multiple RF sources, the calculated power density should comply with following: 1 ,   i iLimit i S S Where: i S = the power density when the f is i . iLim it S , = the reference level requirement for power density when f is i . f = operating frequency. 3. The calculation of the power density or safe distance is: NOTE 1: The RF exposure evaluation is base on the far-field and the radiation exposure is over-estimated. NOTE 2: The maximum output power level is taken into account as a worst case for the purpose of the calculation of power density or safe distance. NOTE 3: The minimum antenna feed cable loss (assumed no cable loss) is taken into account as a worst case for the purpose of the calculation of power density or safe distance. NOTE 4: The maximum antenna radiation exposure orientation and maximum antenna gain is taken into account as a worst ca…

Text truncated - open the document above for the full version.