QISS10-201WAMediaPad 10 Link with Bluetooth and WiFi

Quick Start 1 1 For More Help Welcome to the bright new world of HUAWEI MediaPad 10 Link (HUAWEI MediaPad for short). For more help, go to http://www.huaweidevice.com to download the User Guide . To find the User Guide of your tablet quickly, enter HUAWEI MediaPad 10 Link in the webpage search box. Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline and email address in your country or region. The figures in this guide are provided for your reference only. The appearance and display features may vary slightly depending on the actual product version. 2 2 HUAWEI MediaPad at a Glance 1 Light sensor 2 Front camera 3 Power key 4 Volume keys 5 Microphone 6 Rear camera 7 Card slot 8 Composite headphone/audio-input jack 9 Micro-USB Port (with the charging function) 10 Speaker 3 3 Installing the microSD Card 1. Open the microSD card slot covers. 2. Insert the microSD card with its gold contacts facing up, as indicated in the preceding figure. Push the card inward until it clicks into place. 3. Replace the card slot covers. Do not remove the card slot cover from the tablet. 4 4 Powering On or Off Powering On Press and hold the power key until HUAWEI MediaPad vibrates. If HUAWEI MediaPad has not been used for a long time or the battery level is low, you may not be able to power it on immediately after you start charging the battery. Allow the battery to charge for a few minutes before attempting to use it. Powering Off Press and hold the power key until a dialog box is displayed. Then follow the onscreen instructions to power off HUAWEI MediaPad. 5 Locking the Screen When your HUAWEI MediaPad is turned on, press the Power button to lock the screen. If your HUAWEI MediaPad is idle for a preset period of time, the screen will lock automatically. 6 Unlocking the Screen 1. Press the Power button to wake up the screen. 2. Drag the lock icon to theicon on the right. 5 7 Gestures The following simple finger gestures make it easy to use your HUAWEI MediaPad. Touch: Touch an item to select or open it. Double-click: Touch the screen twice consecutively to zoom in. Touch and hold: Touch and hold the screen to display an options menu. Flick: Flick up or down to scroll up or down. Flick left or right to switch between screens. Drag: Touch and hold an item to drag it to another position. Pinch: Pinch two fingers together or apart to zoom in or out. You can use this gesture when browsing photos and web pages. 6 8 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair. Without authorization, no organization or individual can change the mechanical, safety, or performance design of the device. When using the device, observe all applicable laws and regulations and respect the legal rights of other people. Environmental Requirements for Using the Device Keep the device far from sources of heat and fire, such as a heater or a candle. Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator. Place the device on a stable surface. Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight. Keep the ambient temperature between 0°C and 35°C while the device is being charged. Keep the ambient temperature between 0°C to 35°C for using the device powered by a battery. Do not place any object (such as a candle or a water container) on the device. If any foreign object or liquid enters the device, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes. 7 Traffic Security Observe local laws and regulations while using the device. In addition, if using the device while driving a vehicle, comply with the following guidelines: Concentrate on driving. Your first responsibility is to drive safely. RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates. Do not use your device while flying in an aircraft. Power off your device before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Precautions for Using Wireless Devices The device complies with the RF specifications when the device is used in portable exposure conditions or at a distance of 1.5 cm from your body. Do not use the device where using wireless devices is prohibited or may cause interference or danger. The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device. Do not take the device into operating rooms, intensive care units (ICUs), or coronary care units (CCUs). Areas with Inflammables and Explosives Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols. 8 Do not store or transport the device in the same box as inflammable liquids, gase…

Text truncated - open the document above for the full version.

COMPANY LETTERHEAD Date (05/01/2013) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Bu Cookies Phone: +86-755-88286998 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: FCC ID: QISS10-201WA. FCC ID: QISS10-201W This authorization is valid until further written notice from Huawei Technologies Co., Ltd. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhangxinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2012-12-26 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISS10-201WA To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2013-03-05: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

HUAWEI MediaPad SECRET Page1, Total7 Photo documentation of external of product HUAWEI MediaPad SECRET Page2, Total7 Dimensions (L × W × H)：257.4mm（length） × 175.9mm （width）× 9.9 mm（height） HUAWEI MediaPad SECRET Page3, Total7 HUAWEI MediaPad SECRET Page4, Total7 HUAWEI MediaPad SECRET Page5, Total7 HUAWEI MediaPad SECRET Page6, Total7 HUAWEI MediaPad SECRET Page7, Total7

HUAWEI MediaPad 10 Link SECRET Page1, Total 1

HUAWEI MediaPad 10 Link SECRET Page1, Total 1 Label Location

HUAWEI MediaPad 10 FHD SECRET Page1, Total16 Photo documentation of interior of product HUAWEI MediaPad 10 FHD SECRET Page2, Total16 HUAWEI MediaPad 10 FHD SECRET Page3, Total16 HUAWEI MediaPad 10 FHD SECRET Page4, Total16 HUAWEI MediaPad 10 FHD SECRET Page5, Total16 HUAWEI MediaPad 10 FHD SECRET Page6, Total16 HUAWEI MediaPad 10 FHD SECRET Page7, Total16 HUAWEI MediaPad 10 FHD SECRET Page8, Total16 HUAWEI MediaPad 10 FHD SECRET Page9, Total16 HUAWEI MediaPad 10 FHD SECRET Page10, Total16 HUAWEI MediaPad 10 FHD SECRET Page11, Total16 HUAWEI MediaPad 10 FHD SECRET Page12, Total16 HUAWEI MediaPad 10 FHD SECRET Page13, Total16 HUAWEI MediaPad 10 FHD SECRET Page14, Total16 HUAWEI MediaPad 10 FHD SECRET Page15, Total16 HUAWEI MediaPad 10 FHD SECRET Page16, Total16

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Project Name: _______________________ Model : _______________________ FCC ID : _______________________ Report No. : _______________________ APPROVED (Lab Manager) CHECKED PREPARED BY DATE 2013-01-17 2013-01-17 2013-01-17 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. S10-201w, S10-201wa QISS10-201W,QISS10-201WA SYBH(Z-SAR)016112012-2 HUAWEI MediaPad 10 Link Report No.:SYBH(Z-SAR)016112012-2 FCC ID: QISS10-201W,QISS10-201WA 2013-01-17 Page 2 of 27 Table of Contents 1 General Information ............................................................................................................................................................ 4 1.1 Statement of Compliance .......................................................................................................................................... 4 1.2 RF exposure limits...................................................................................................................................................... 4 1.3 EUT Description ......................................................................................................................................................... 5 1.3.1 General Description ........................................................................................................................................... 6 1.4 Test specification(s) .................................................................................................................................................. 7 1.5 Testing laboratory ....................................................................................................................................................... 7 1.6 Applicant and Manufacturer ...................................................................................................................................... 7 1.7 Application details ...................................................................................................................................................... 7 1.8 Ambient Condition ..................................................................................................................................................... 7 2 SAR Measurement System ............................................................................................................................................. 8 2.1 SAR Measurement Set-up ....................................................................................................................................... 8 2.2 Test environment ........................................................................................................................................................ 9 2.3 Data Acquisition Electronics description ................................................................................................................ 9 2.4 Probe description ..................................................................................................................................................... 10 2.5 Phantom description ................................................................................................................................................ 11 2.6 Device holder description ........................................................................................................................................ 11 2.7 Test Equipment List ................................................................................................................................................. 12 3 SAR Measurement Procedure ...................................................................................................................................... 13 3.1 Scanning procedure ................................................................................................................................................. 13 3.2 Spatial Peak SAR Evaluation ................................................................................................................................. 14 3.3 Data Storage and Evaluation .................................................................................................................................. 15 4 System Verification Procedure ........................................................................................................................................ 17 4.1 Tissue Verification .................................................................................................................................................... 17 4.2 System Check ........................................................................................................................................................... 18 4.3 System check Procedure ........................................................................................................................................ 18 5 Measurement Uncertainty Evaluation .......................................................................................................................... 19 5.1 Measurement uncertainty evaluation for SAR test .............................................................................................. 19 5.2 Measurement uncertainty evaluation for system validation ..................................…

Text truncated - open the document above for the full version.

Report No.:SYBH(Z-SAR)016112012-2 FCC ID:QISS10-201W, QISS10-201WA Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D2450-ES-Body Date: 2013-1-9 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D2450-ES-Body DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; ε r = 52.334; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10- 2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; Calibrated: 2012-7-25 lPhantom: SAM4; Type: SAM; Serial: TP-1620 lDASY52 52.8.3(988); SEMCAD X 14.6.7(6848) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 12.5 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 84.489 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.4 W/kg SAR(1 g) = 12.3 W/kg; SAR(10 g) = 5.53 W/kg Maximum value of SAR (measured) = 14.0 W/kg 0 dB = 14.0 W/kg = 11.46 dBW/kg

Report No.:SYBH(Z-SAR)016112012-2 FCC ID:QISS10-201W, QISS10-201WA Appendix B. SAR Measurement Plots Table of contents WiFi 802.11b Body Date: 2013-1-10 Test Laboratory: HUAWEI SAR/HAC Lab S10-201w,S10-201wa WiFi 802.11b 11CH Rear side 0mm DUT: S10-201w,S10-201wa; Type: HUAWEI MediaPad 10 Link; Serial: SAR1 Communication System: WiFi(802.11b/g/n); Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2462 MHz; σ = 1.983 mho/m; ε r = 52.303; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10-2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; Calibrated: 2012-7-25 lPhantom: SAM4; Type: SAM; Serial: TP-1620 lDASY52 52.8.3(988); SEMCAD X 14.6.7(6848) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.45 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.824 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 3.53 W/kg SAR(1 g) = 1.29 W/kg; SAR(10 g) = 0.485 W/kg Maximum value of SAR (measured) = 1.50 W/kg 0 dB = 1.50 W/kg = 1.76 dBW/kg Date: 2013-1-10 Test Laboratory: HUAWEI SAR/HAC Lab S10-201w,S10-201wa WiFi 802.11b 11CH Rear side 0mm repeated DUT: S10-201w,S10-201wa; Type: HUAWEI MediaPad 10 Link; Serial: SAR1 Communication System: WiFi(802.11b/g/n); Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2462 MHz; σ = 1.983 mho/m; ε r = 52.303; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10-2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; Calibrated: 2012-7-25 lPhantom: SAM4; Type: SAM; Serial: TP-1620 lDASY52 52.8.3(988); SEMCAD X 14.6.7(6848) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.45 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.822 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 3.50 W/kg SAR(1 g) = 1.27 W/kg; SAR(10 g) = 0.482 W/kg Maximum value of SAR (measured) = 1.49 W/kg 0 dB = 1.49 W/kg = 1.73 dBW/kg Date: 2013-1-10 Test Laboratory: HUAWEI SAR/HAC Lab S10-201w,S10-201wa WiFi 802.11b 6CH Rear side 0mm DUT: S10-201w,S10-201wa; Type: HUAWEI MediaPad 10 Link; Serial: SAR1 Communication System: WiFi(802.11b/g/n); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.953 mho/m; ε r = 52.376; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10-2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; Calibrated: 2012-7-25 lPhantom: SAM4; Type: SAM; Serial: TP-1620 lDASY52 52.8.3(988); SEMCAD X 14.6.7(6848) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.05 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.373 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 3.37 W/kg SAR(1 g) = 1.22 W/kg; SAR(10 g) = 0.465 W/kg Maximum value of SAR (measured) = 1.41 W/kg 0 dB = 1.41 W/kg = 1.49 dBW/kg Date: 2013-1-9 Test Laboratory: HUAWEI SAR/HAC Lab S10-201w,S10-201wa WiFi 802.11b 1CH Rear side 0mm DUT: S10-201w,S10-201wa; Type: HUAWEI MediaPad 10 Link; Serial: SAR1 Communication System: WiFi(802.11b/g/n); Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2412 MHz; σ = 1.923 mho/m; ε r = 52.448; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10-2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; Calibrated: 2012-7-25 lPhantom: SAM4; Type: SAM; Serial: TP-1620 lDASY52 52.8.3(988); SEMCAD X 14.6.7(6848) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.11 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.727 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 2.68 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.392 W/kg Maximum value of SAR (measured) = 1.16 W/kg 0 dB = 1.16 W/kg = 0.64 dBW/kg Date: 2013-1-9 Test Laboratory: HUAWEI SAR/HAC Lab S10-201w,S10-201wa WiFi 802.11b 1CH Left side 0mm DUT: S10-201w,S10-201wa; Type: HUAWEI MediaPad 10 Link; Serial: SAR1 Communication System: WiFi(802.11b/g/n); Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2412 MHz; σ = 1.923 mho/m; ε r = 52.448; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10-2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; Calibrated: 2012-7-25 lPhantom: SAM4; Type: SAM; Serial: TP-1620 lDASY52 52.8.3(988); SEMCAD X 14.6.7(6848) Configuration/Body/Area Scan (9x12x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.145 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.798 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.295 W/kg SAR(1 g) = 0.130 W/kg; SAR(10 g) = 0.061 W/kg 0 dB = 0.145 W/kg = -8.39 dBW/kg Date: 2013-1-9 Test Laboratory: HUAWEI SAR/HAC Lab S10-201w,S10-201wa WiFi 802.11b 1CH Top side 0mm DUT: S10-201w,S10-201wa; Type: HUAWEI MediaPad 10 Link; Serial: SAR1 Communication System: WiFi(802.11b/g/n); Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2412 MHz; σ = 1.923 mho/m; ε r = 52.448; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.38, 4.38, 4.38); Calibrated: 2012-10-2; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn851; …

Text truncated - open the document above for the full version.

Justification of the extended calibration of Dipole D2450V2 SN: 860 Per KDB 450824, we have Measured the Impedance and Return Loss as below, and the return loss is <-20dB, with 20% of prior calibration; the real or imaginary parts of the impedance is with 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Calibration Date 2011-03-08 Measured Date 2012-03-07 Dipole2450 Head TST Target Value Measured Value Difference Impedance transformed to feed point 54.0Ω+2.2jΩ 54.1Ω+2.36jΩ R=0.1Ω, X=0.16Ω Return Loss -27.2dB -27.34dB -0.51% Dipole2450 Body TST Target Value Measured Value Difference Impedance transformed to feed point 49.0Ω+4.9jΩ 49.48Ω+5.13jΩ R=0.48Ω, X=0.23Ω Return Loss - 26.0dB -26.38dB -1.46% Measured Date 2011-03-08 2012-03-07 ------- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

FCC RF Test Report Product Name: HUAWEI MediaPad 10 Link Model Number: S10-201w,S10-201wa Report No: SYBH(Z-RF) 029112012-2003 FCC ID: QISS10-201W, QISS10-201WA Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of S10-201w,S10-201wa FCC ID: QISS10-201W,QISS10-201WA Report No: SYBH(Z-RF) 029112012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total30 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of S10-201w,S10-201wa FCC ID: QISS10-201W,QISS10-201WA Report No: SYBH(Z-RF) 029112012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total30 REGULATION FCC CFR47 Part 2:2011: Subpart J; FCC CFR47 Part 15:2011: Subpart C; ANSI C63.10 START OF TEST Nov.27, 2012 END OF TEST Dec.06, 2012 Final Judgement: Pass Approved By Senior Engineer Dec.06, 2012 Dai Linjun Date Name Signature Reviewed By Dec.06, 2012 Cousy Xu Date Name Signature Operator Dec.06, 2012 Huang Qiuliang Date Name Signature FCC Test Report of S10-201w,S10-201wa FCC ID: QISS10-201W,QISS10-201WA Report No: SYBH(Z-RF) 029112012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total30 Contents 1 Summary .....................................................................................................................................................5 2 Product Description ...................................................................................................................................6 2.1 PRODUCTION INFORMATION ....................................................................................................................6 2.2 MODIFICATION INFORMATION ..................................................................................................................7 3 Test Site Description ..................................................................................................................................8 3.1 TEST MODES .........................................................................................................................................8 4 Product Description ...................................................................................................................................9 4.1 TECHNICAL CHARACTERISTICS ................................................................................................................9 4.2 EUT IDENTIFICATION LIST .....................................................................................................................11 5 Main Test Instruments .............................................................................................................................13 6 Transmitter Measurements .....................................................................................................................14 6.1 BANDWIDTH MEASUREMENT ..................................................................................................................14 6.2 PEAK OUTPUT POWER ..........................................................................................................................16 6.3 BAND EDGE SPURIOUS EMISSION ...........................................................................................................18 6.4 CONDUCTED RF SPURIOUS ...................................................................................................................20 6.5 POWER SPECTRAL DENSITY ..................................................................................................................22 6.6 RADIATED SPURIOUS EMISSION & SPURIOUS IN RESTRICTED BAND ..........................................................24 6.7 CONDUCTED EMISSION AT POWER PORT ...............................................................................................27 7 System Measurement Uncertainty ..........................................................................................................29 8 Appendices ...............................................................................................................................................30 FCC Test Report of S10-201w,S10-201wa FCC ID: QISS10-201W,QISS10-20…

Text truncated - open the document above for the full version.