QISS10-232LS10-232L

Quick Start 2 HUAWEI MediaPad 10 Link+ at a Glance Congratulations on your purchase of the HUAWEI MediaPad 10 Link+. 3 Press and hold the power key to power on or off your device or restart it. Press the power key once to turn on or off the screen. Installing the SIM and microSD Cards Charging the Battery 4 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.  Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Protecting your hearing when using a headset  To prevent possible hearing damage, do not listen at high volume levels for long periods.  Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume to a safe and comfortable level. 5  Exposure to high volumes while driving may cause distraction and increase your risk of an accident. Areas with flammables and explosives  Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols.  Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security  Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.  Concentrate on driving. Your first responsibility is to drive safely.  Do not hold the device while driving. Use hands-free accessories.  When you must make or answer a call, pull off the road safely and park the vehicle first.  RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates.  Do not use your device while flying in an aircraft or immediately before boarding. Using wireless devices in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. 6 Operating environment  Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.  Do not use your device during thunderstorms to protect your device against any danger caused by lightning.  Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C 60 °C. Extreme heat or cold may  Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods.  To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.  Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle.  Do not place sharp metal objects, such as pins, near the earpiece or speaker. The earpiece may attract these objects and result in injury.  Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated device for an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur.  Do not touch the device's antenna. Otherwise, communication quality may be reduced.  Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.  Observe local laws and regulations, and respect the privacy and legal rights of others. 7 Child's safety  Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children.  The device and its accessories are not intended for use by children. Children should only use the device with adult supervision. Accessories  Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.  Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Charger safety  For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.  Unplug the charger from electrical outlets and the device when not in use.  Do not drop or cause an impact to the charger.  If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.  Do not touch the power cord with wet hands or pull the power cord to disconnect the charger. 8  Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.  If your charger has been exposed to water, other liquids, or excessive moisture, take it to an authorized service center for insp…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date (22/04/2014) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen, 518129, China hereby authorize TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Felix Li Phone: +86-755-88286998-3243 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S. Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. This authorization is application to following FCC ID application: FCC ID: QISS10-232L Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

Huawei Technologies Co.,Ltd. Federal Communications Commission 2014-04-22 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISS10-232L To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2014-06-30: User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755- 28970299

SECRET Page1, Total17 Photo documentation of external of product SECRET Page2, Total17 Dimensions (L × W × H)：257.4mm（length） × 175.9mm （width）× 9.9 mm（height） SECRET Page3, Total17 SECRET Page4, Total17 SECRET Page15, Total17 SECRET Page16, Total17 SECRET Page17, Total17

HUAWEI MediaPad 10 Link+ SECRET Page1, Total 1

HUAWEI MediaPad 10 Link+ SECRET Page1, Total 1 Label Location

HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第1页, 共13页 Photo documentation of interior of product HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第2页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第3页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第4页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第5页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第6页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第7页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第8页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第9页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第10页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第11页, 共13页 HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第12页, 共13页 HK BYD HUAWEI MediaPad 10 Link+ 文档密级 2014-1-6 华为保密信息,未经授权禁止扩散 第13页, 共13页 HK BYD

SPORTON INTERNATIONAL (XI’AN) INC. Issued Date : Apr. 25, 2014 TEL : 86-029-8860-8767 / FAX : 86-029-8860-8791 Form version. : 140305 FCC ID : QISS10-232L Page 1 of 47 FCC SAR Test Report Report No. : FA440418 FCC SAR Test Report APPLICANT : Huawei TechnologiesCo., Ltd. EQUIPMENT : Mobile Tablet PC BRAND NAME : HUAWEI MODEL NAME : S10-232L MARKETING NAME : HUAWEI MediaPad 10 Link+ FCC ID : QISS10-232L STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 We, SPORTON INTERNATIONAL (XI’AN) INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (XI’AN) INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL (XI’AN) INC. 1F, Building A3, No. 39 Chuangye Rd., Xi'an Hi-tech Zone, Shanxi Province, P. R. C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL (XI’AN) INC. Issued Date : Apr. 25, 2014 TEL : 86-029-8860-8767 / FAX : 86-029-8860-8791 Form version. : 140305 FCC ID : QISS10-232L Page 2 of 47 FCC SAR Test Report Report No. : FA440418 Table of Contents 1. Statement of Compliance ..............................................................................................................................................4 2. Administration Data .......................................................................................................................................................5 3. Guidance Standard ........................................................................................................................................................5 4. Equipment Under Test (EUT) ........................................................................................................................................6 4.1 General Information ................................................................................................................................................6 4.2 Maximum Tune-up Limit ..........................................................................................................................................7 5. RF Exposure Limits .....................................................................................................................................................11 5.1 Uncontrolled Environment ..................................................................................................................................... 11 5.2 Controlled Environment ......................................................................................................................................... 11 6. Specific Absorption Rate (SAR) ..................................................................................................................................12 6.1 Introduction ...........................................................................................................................................................12 6.2 SAR Definition .......................................................................................................................................................12 7. System Description and Setup ...................................................................................................................................13 8. Measurement Procedures ...........................................................................................................................................14 8.1 Spatial Peak SAR Evaluation ................................................................................................................................14 8.2 Power Reference Measurement............................................................................................................................15 8.3 Area Scan .............................................................................................................................................................15 8.4 Zoom Scan ............................................................................................................................................................16 8.5 Volume Scan Procedures ......................................................................................................................................16 8.6 Power Drift Monitoring ...........................................................................................................................................16 9. Test Equipment List .....................................................................................................................................................17 10. System Verification ....................................................................................................................................................18 10.1 Tissue Verification ...............................................................................................................................................18 10.2 System Performance Check Results ...................................................................................................................19 11. RF Exposure Positions ..............................................................................................................................................20 11.1 SAR Testing for Tablet .........................................................................................................................................20 12. Conducted RF Output Power (Unit: dBm) ................................................................................................................21 13. Bluetooth Exclusions Applied .........................................................................................................…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (XI’AN) INC. Page C1 of C1 Issued Date : Apr. 25, 2014 TEL : 86-029-8860-8767 / FAX : 86-029-8860-8791 Form version. : 140305 FCC ID : QISS10-232L FCC SAR Test Report Report No. : FA440418 Appendix C. DASY Calibration Certificate The DASY calibration certificates are shown as follows. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 Extended Dipole Calibrations Referring to KDB 865664 D01 v01r03, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Dipole Verification Data> - D835V2, serial no. 4d151(Date of Measurement 03.24.2014) 835MHz - Head 835MHz – Body SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Justification of the extended calibration> D835V2 – serial no. 4d151 TSL Head Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.25.2013 -31.201 51.736 -2.201 -25.418 47.059 -4.2930 03.24.2014 -30.505 2.2351.767 0.031-2.252 -0.051-25.828 -1.61347.599 0.54 -4.453 -0.16 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 Extended Dipole Calibrations Referring to KDB 865664 D01 v01r03, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Dipole Verification Data> - D1750V2, serial no. 1090(Date of Measurement 03.26.2014) 1750MHz - Head 1750MHz – Body SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Justification of the extended calibration> D1750V2 – serial no. 1090 TSL Head Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.27.2013 -41.821 49.838 -0.793 -26.2 45.336 0.1797 03.26.2014 -37.025 11.4549.553 -0.2850.808 1.601-26.949 -2.8646.183 0.874 0.87760.698 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 Extended Dipole Calibrations Referring to KDB 865664 D01 v01r03, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Dipole Verification Data> - D1900V2, serial no. 5d170(Date of Measurement 03.26.2014) 1900MHz - Head 1900MHz – Body SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Justification of the extended calibration> D1900V2 – serial no. 5d170 TSL Head Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.27.2013 -24.733 53.791 4.682 -25.967 49.588 4.996 03.26.2014 -24.628 0.42555.002 1.2113.868 -0.814-26.017 -0.19349.067 -0.521 5.486 0.490 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 Extended Dipole Calibrations Referring to KDB 865664 D01 v01r03, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Dipole Verification Data> - D2450V2, serial no. 908(Date of Measurement 03.25.2014) 2450MHz - Head 2450MHz – Body SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 <Justification of the extended calibration> D2450V2 – serial no. 908 TSL Head Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 03.26.2013 -24.251 56.531 -0.125 -30.033 52.631 1.881 03.25.2014 -25.155 -0.37356.061 -0.47-0.059 0.066-29.785 0.82652.379 -0.252 1.510 -0.371 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration.

SPORTON INTERNATIONAL (XI’AN) INC. Page D1 of D2 Issued Date : Apr. 25, 2014 TEL : 86-029-8860-8767 / FAX : 86-029-8860-8791 Form version. : 140305 FCC ID : QISS10-232L FCC SAR Test Report Report No. : FA440418 Appendix D. SAR Test Setup Photos Bottom Face, Test Separation 0 cm Edge1, Test Separation 0 cm Edge2, Test Separation 0 cm Curved surface of Edge1 at 30 Degree, Test Separation 0 cm SPORTON INTERNATIONAL (XI’AN) INC. Page D2 of D2 Issued Date : Apr. 25, 2014 TEL : 86-029-8860-8767 / FAX : 86-029-8860-8791 Form version. : 140305 FCC ID : QISS10-232L FCC SAR Test Report Report No. : FA440418 X=4.7mm, Y=4.0mm, Z=1.6mm

FCC RF Test Report Product Name: HUAWEI MediaPad 10 Link+ Model Number: S10-232L Report No: SYBH(Z-RF)047032014-2001 FCC ID：QISS10-232L Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 28 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-1. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 28 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2014-04-03 Start Date of Test: 2014-04-03 End Date of Test: 2014-04-10 Test Result: Pass Approved by Senior Engineer: 2014-04-11 Liu Chunlin Date Name Signature Prepared by: 2014-04-11 Zhu Mingjing Date Name Signature RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 28 Modification Record No. Last Report No. Modification Description 1 First report. RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 28 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 2.1 Cellular Band (824-849 MHz paired with 869-894 MHz) ............................................................................ 7 2.2 PCS Band (1850-1915 MHz paired with 1930-1995 MHz) ......................................................................... 8 2.3 AWS Band (1710-1755 MHz paired with 2110-2155 MHz) ........................................................................ 9 2.4 BRS&EBS Band (2500-2690 MHz) .......................................................................................................... 10 2.5 BRS&EBS Band (704-7 16 MHz paired with 734-746MHz) ...................................................................... 11 3 Description of the Equipment under Test (EUT) ................................................................................................... 12 3.1 General Description ................................................................................................................................. 12 3.2 EUT Identity ............................................................................................................................................. 12 3.3 Technical Specification ............................................................................................................................ 13 4 General Test Conditions / Configurations ............................................................................................................. 15 4.1 Test Modes .............................................................................................................................................. 15 4.2 Test Environment ..................................................................................................................................... 15 4.3 Test Frequency ........................................................................................................................................ 16 4.4 DESCRIPTION OF TESTS ...................................................................................................................... 20 4.5 Test Setups .............................................................................................................................................. 23 4.6 Test Conditions ........................................................................................................................................ 25 5 Main Test Instruments .......................................................................................................................................... 27 6 Measurement Uncertainty............................................…

Text truncated - open the document above for the full version.

RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 730 Appendix for test report RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 730 1Appendix_A: Effective (Isotropic) Radiated Power Output Data Part I - Test Results Test Band Test Mode Test Channel Conducted Power ERP [dBm] Limit [dBm] Verdict [dBm] GSM850 GSM/TM1 LCH 33.07 28.62 38.5 PASS MCH 33.06 28.61 38.5 PASS HCH 32.94 28.49 38.5 PASS GSM/TM2 LCH 26.63 22.18 38.5 PASS MCH 26.62 22.17 38.5 PASS HCH 26.68 22.23 38.5 PASS WCDMA850 UMTS/TM1 LCH 22.93 18.48 38.5 PASS MCH 22.88 18.43 38.5 PASS HCH 22.81 18.36 38.5 PASS Test Band Test Mode Test Channel Conducted Power EIRP [dBm] Limit [dBm] Verdict [dBm] GSM1900 GSM/TM1 LCH 29.57 29.17 33 PASS MCH 29.67 29.27 33 PASS HCH 29.25 28.85 33 PASS GSM/TM2 LCH 25.25 24.85 33 PASS MCH 25.27 24.87 33 PASS HCH 25.22 24.82 33 PASS WCDMA1900 UMTS/TM1 LCH 22.56 22.16 33 PASS MCH 22.79 22.39 33 PASS HCH 21.27 20.87 33 PASS WCDMA1700 UMTS/TM1 LCH 22.26 22.06 30 PASS MCH 22.28 22.08 30 PASS HCH 22.27 22.07 30 PASS RF Test Report of S10-232L Report No: SYBH(Z-RF)047032014 -2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 730 Test Band(LTE) Test Mode Test Bandwidth Test Channel Test RB Measured [dBm] EIRP[dB m] Limit [dBm] Verdict BAND4 LTE/TM 1 1.4 LCH RB1#0 21.99 21.79 30 PASS RB1#3 22.11 21.91 30 PASS RB1#5 22.02 21.82 30 PASS RB3#0 22.03 21.83 30 PASS RB3#2 22.09 21.89 30 PASS RB3#3 22.04 21.84 30 PASS RB6#0 21.27 21.07 30 PASS MCH RB1#0 22.22 22.02 30 PASS RB1#3 22.35 22.15 30 PASS RB1#5 22.27 22.07 30 PASS RB3#0 22.28 22.08 30 PASS RB3#2 22.35 22.15 30 PASS RB3#3 22.32 22.12 30 PASS RB6#0 21.5 21.3 30 PASS HCH RB1#0 22.24 22.04 30 PASS RB1#3 20.87 …

Text truncated - open the document above for the full version.