QISS10-D01Laptop Docking

1 Thank you for choosing the HUAWEI S10-D01 LAPTOP DOCKING (dock for short). Dock at a Glance No. Item 1 Hinge 2 USB port 3 Keyboard 4 Buffer 5 HUAWEI MediaPad Dock Connector 6 Touchpad 7 Hinge lock 8 USB port The HUAWEI MediaPad Dock Connector of NO.5 can be used to charge. 2 Functional Keys The laptop dock provides the following functional keys to facilitate your operations: Return Enable or disable Wi-Fi Switch between Chinese and English input methods Reduce the screen brightness Increase the screen brightness Mute or unmute the speaker Reduce the volume Increase the volume Rewind Play or pause Fast forward Display recently used applications Switch LCD display Search Open or close the Camera application Enable or disable Bluetooth Lock the screen Touchpad Return to the home screen Take a screenshot 3 Installing HUAWEI MediaPad 10 FHD 1. Rotate the hinge by 60 to 120 degrees to make the dock's opening face upward. 2. Align HUAWEI MediaPad 10 FHD (MediaPad 10 for short) with the hinge. 3. Apply a gentle force to MediaPad 10 to install it on the hinge. When MediaPad 10 clicks into place, the hinge lock moves to the right, indicating that MediaPad 10 has been successfully installed to the dock. Before you install MediaPad 10 to the dock, ensure that the hinge lock is set to the left, indicating that the hinge is unlocked. 4 Removing HUAWEI MediaPad 10 FHD 1. Use one hand to move the hinge lock to the left and fix the location of the dock. 2. Use the other hand to move MediaPad 10 upward and remove it from the dock. When you move MediaPad 10 and the dock after installation, consider them as a whole and hold the bottom of the dock. Do not attempt to move them by grabbing MediaPad 10 only. Before you remove MediaPad 10, set the hinge lock to the left to unlock the hinge. 5 Warnings and precautions: 1. This dock is designed for use with MediaPad 10 only. 2. Keep the dock clean. 3. Do not use the dock in a humid environment or expose it to humid air. 4. Protect the dock from steam generated by electrical products, such as a rice cooker or kettle. 5. Do not expose the dock to direct sunlight for too long, for example, do not place it in a car in direct sunlight. 6. Do not place the dock next to magnetic materials. 7. Do not place the dock on an unstable surface in case it drops. 8. Do not place heavy objects on the dock. 9. Protect the dock from violent shaking or bumps. Use a backpack with a buffering cushion to carry the dock. Do not place too many objects in the backpack to avoid damage to the dock. 10. Do not spill liquids or food scraps on the dock. 11. Keep your hands dry while using the dock to protect the dock from water damage. 12. During a flight, do not use the dock while the ai rplane is taking off or landing. 13. Do not use the dock near medical equipment in case it interferes with the equipment. 14. If the power cable or plug is damaged, stop using the dock and contact technical support personnel. 15. Before you clean the dock, power off MediaPad 10 , and disconnect it from the power supply. 16. Use a slightly damp cloth (if possible, use a cleansing cloth dedicated for laptop computers) to clean the plastic parts of the dock. Do not use coarse or corrosive objects such as chemical cleaners or aerosols. 17. Do not forcibly remove MediaPad 10 from the dock without first unlocking the hinge. 6 18. Do not forcibly install MediaPad 10 to the dock before aligning them. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 7 Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd. and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limite…

Text truncated - open the document above for the full version.

HUAWEI TECHNOLOGIES CO., LTD DATE :2012-07-27 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint China Certification & Inspection Services Co., Ltd.; 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China； Bruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with HUAWEI TECHNOLOGIES CO., LTD, Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Dated this 2012-07-27 Agency agreement expiration date: 2013-07-27 By: Zhang Xinghai Signature Printed Title: Manager On behalf of : HUAWEI TECHNOLOGIES CO., LTD Telephone: 0755-89650288

HUAWEI TECHNOLOGIES CO., LTD DATE :2012-07-27 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:_ QISS10-D01 Product Name: Laptop Docking Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: 1. Schematic diagram. 2. Block Diagram. 3. Operational description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2012-07-27 By: Zhang Xinghai Signature Printed Title: Manager On behalf of : HUAWEI TECHNOLOGIES CO., LTD Telephone: 0755-89650288

Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 19 of 28 9 EUT Constructional Details Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 20 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 21 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 22 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 23 of 28

4 5 2 1 345678 8 7 6 3 12 AB CDEF EDC BA $% F 7mm 5mm 5mm 5mm
 40.00 mm 26.00 mm 46 00mm . 3.00mm 40mm 26mm FCC ID: QISS10-D01 Model/: S10-D01 Rated/ : 5V 2A HUAWEI TECHNOLOGIES CO., LTD./  MADE IN CHINA/ LAPTOP DOCKING This device complies with part 15 of the FCC Rules.Operation issubject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that may cause undesired operation.  FCC ID: QISS10-D01 Model/: S10-D01 Rated/ : 5V 2A HUAWEI TECHNOLOGIES CO., LTD./  MADE IN CHINA/ LAPTOP DOCKING This device complies with part 15 of the FCC Rules.Operation issubject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that may cause undesired operation. 

Label Location

Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 24 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 25 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 26 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 27 of 28 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 28 of 28 ------End------

China Certification & Inspection Services Co., Ltd. Report No: CCIS2070011701 Authorized Signature: Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of CCIS International Electrical Approvals or testing done by CCIS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by CCIS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover Page FCC REPORT Applicant: HUAWEI TECHNOLOGIES CO.,LTD. Address of Applicant: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Equipment Under Test (EUT) Product Name: Laptop Docking Model No.: S10-D01 FCC ID: QISS10-D01 Applicable standards: FCC CFR Title 47 Part 15 Subpart B: 2010 Date of sample receipt: 27 Jul., 2012 Date of Test: 27 to 28 Jul., 2012 Date of report issued: 30 Jul., 2012 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 28 2 Version Version No. Date Description 00 30 Jul., 2012 Original Prepared By: Date: 30 Jul., 2012 Project Engineer Check By: Date: 30 Jul., 2012 Reviewer Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 28 3 Contents Page 1 COVER PAGE ......................................................................................................................................................... 1 2 VERSION .................................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................................. 3 4 TEST SUMMARY .................................................................................................................................................... 4 5 GENERAL INFORMATION ................................................................................................................................... 5 5.1 CLIENT INFORMATION ....................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................. 5 5.3 OPERATING MODES .......................................................................................................................................... 5 5.4 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 5 5.5 DEVIATION FROM STANDARDS .......................................................................................................................... 5 5.6 ABNORMALITIES FROM STANDARD CONDITIONS .............................................................................................. 5 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................. 6 5.8 TEST FACILITY ................................................................................................................................................... 6 5.9 TEST LOCATION ................................................................................................................................................ 6 6 TEST INSTRUMENTS LIST .................................................................................................................................. 7 7 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 7.1 CONDUCTED EMISSIONS ................................................................................................................................... 8 7.2 RADIATED EMISSION ....................................................................................................................................... 13 8 TEST SETUP PHOTO .......................................................................................................................................... 18 9 EUT CONSTRUCTIONAL DETAILS ................................................................................................................. 19 Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS…

Text truncated - open the document above for the full version.

Report No: CCIS2070011701 China Certification & Inspection Services Co., Ltd. Project No.: CCIS20700117IT 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 18 of 28 8 Test Setup Photo Conducted Emission Radiated Emission