QISS7-104HUAWEI Ideos Tablet S7

Ideos Tablet S7 Quick Start Contents 1 Packing list.......................................................... 1 7 Locking and unlocking the screen ...................... 6 2 Getting to know your Tablet ................................ 1 7.1 To lock the screen................................................... 6 3 Installation........................................................... 2 7.2 To unlock the screen............................................... 6 8 Setting date and time .......................................... 6 3.1 To remove the back cover ...................................... 2 9 Installing or removing the microSD card ............. 7 3.2 To install the SIM card............................................ 3 10 For more help.................................................... 7 3.3 To install the battery ............................................... 3 11 Warnings and Precautions ................................ 8 3.4 To install the back cover......................................... 3 4 Turning the Tablet on or off ................................. 4 4.1 To turn the Tablet on .............................................. 4 4.2 PIN protection ........................................................ 4 4.3 To turn the Tablet off............................................... 4 5 Charging the battery ........................................... 5 6 Using the touchscreen ........................................ 5 i 1 1 Packing list 2 Getting to know your Tablet The product package contains the following items. S7 Tablet 1 S7 Tablet 2 Stylus 1 Ambient light sensor 3 Battery Home key 2 4 Power adapter Menu key 3 5 USB cable Back key 4 6 Quick start 5 LCD screen 6 microSD card slot If the items in the product package are not consistent with hose in the packing list, contact the vendor. The figures and operation descriptions in this guide are provided only for reference, see the actual product for details. 7 Dock interface t 8 Microphone End key 9 10 Power interface 2 11 Micro USB interface 3 Installation OFN (Optical Finger Navigation) key 12 Call key 13 3.1 To remove the back cover 14 Speaker 15 LED indicator To remove the back cover, refer to the following figure and steps. 16 Camera lens 22 23 Power key 17 1. Unfold the bracket. 18 Bracket 2. Open and remove the back cover. 19 Stylus jack 20 Camera lens To prevent injury, properly place the back cover after you emove the back cover because it may have sharp edges and angles. Volume Up/Down key 21 r 22 Speaker 23 Headset jack 3 3.2 To install the SIM card Before installing or removing the SIM card, power off the Tablet. Insert your SIM card into the SIM card slot as shown in the following figure until the SIM card is completely in position. 3.4 To install the back cover To install the back cover, refer to the following figure and steps. 3.3 To install the battery 1. Install the back cover. To install the battery, refer to the following figure. 2. Fold the bracket. 4 4 Turning the Tablet on or off 4.2 PIN protection If your SIM card is preset with a PIN, the Tablet prompts you to enter the PIN. 4.1 To turn the Tablet on The PIN may have been provided by your service provider with your SIM card. If you lost it, consult your service provider. Before you turn the Tablet on, ensure that the SIM card has been correctly installed and that the battery is correctly installed or the Tablet has been properly connected to the power supply. 4.3 To turn the Tablet off To turn the Tablet on, press and hold the Power key for about two seconds. 1. Press and hold Power key to open the Tablet options menu. 2. Touch Power off. 3. Touch OK to assure you want to turn your Tablet off in the dialog that opens. 5 5 Charging the battery 6 Using the touchscreen Before charging the battery, ensure that the battery is properly installed on your Tablet. By using your finger, you can manipulate target items such as applications and controls, and enjoy the touchscreen at your fingertips. The Tablet supports the following actions. To charge the battery, you can connect the Tablet to the power supply through the power adapter, as shown in the following figure. Action Description Touch Simply touch items on the screen, such as applications and controls. For example, you can type letters and symbols using the onscreen keyboard. Touch and hold Touch and hold an item on the screen until an action occurs. For example, you can usually touch and hold the screen to open the context menu of the active item. Drag Touch and hold an item, and then move your finger on the screen until you reach the target position. For example, you can drag a shortcut to the trash to delete it. Flick Flick your finger vertically or horizontally across the screen. For example, you can flick up and down to manipulate a scroll bar and flick left and right to switch between pictures. 6 7 Locking and unlocking the screen 8 Setting date and time By default, the Tablet automatically uses the network provided date, time zone, and time. 7.1 To lock the screen When the time provided by the network is automatically used, you cannot set the date, time, and time zone by yourself. When the Tablet is on, press the Power key to turn off and lock the screen. When the Tablet remains idle for a time period that you have set, the screen will automatically lock. To manually set date and time, do as the following steps. 1. Open the Settings list. To save your battery or prevent accidental taps when not in use, or when you want to wipe smudges off your touchscreen, turn off and lock the screen. 2. Touch Date & time. 3. Touch Automatic to make it unchecked. 4. Touch Set date. Then touch the plus button or the minus button to adjust the date, month, and year, or touch the text field of date, month, and year to enter them. Touch Set when finished. 7.2 To unlock the screen When the screen is off, you can press the Power key to turn on it, and then unlock the screen through the following steps. 5. Touch Select time …

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISS7-104 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISS7-104 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 09/30/2010 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISS7-104 Product Name: HUAWEI Ideos Tablet S7 Product Model: S7-104 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705.

HUAWEI Ideos Tablet S7 SECRET Page1, Total5 Photo documentation of external of product HUAWEI Ideos Tablet S7 SECRET Page2, Total5 HUAWEI Ideos Tablet S7 SECRET Page3, Total5 HUAWEI Ideos Tablet S7 SECRET Page4, Total5 HUAWEI Ideos Tablet S7 SECRET Page5, Total5

HUAWEI Ideos Tablet S7 SECRET Page1, Total5 Photo documentation of external of product HUAWEI Ideos Tablet S7 SECRET Page2, Total5 HUAWEI Ideos Tablet S7 SECRET Page3, Total5 HUAWEI Ideos Tablet S7 SECRET Page4, Total5 HUAWEI Ideos Tablet S7 SECRET Page5, Total5

68.00 5 0 . 0 0 0168 POWER RATING: +5 V; 2.0 A HUAWEI Ideos Tablet S7 Model: S7-104 HG523 FCC ID:QISS7-104 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. HG523

HUAWEI Ideos Tablet S7 SECRET Label Location

68.00 5 0 . 0 0 0168 POWER RATING: +5 V; 2.0 A HUAWEI Ideos Tablet S7 Model: S7-104 HG523 FCC ID:QISS7-104 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. HG523

HUAWEI Ideos Tablet S7 SECRET Label Location

Internal Photos of HUAWEI Ideos Tablet S7

Internal Photos of HUAWEI Ideos Tablet S7

Report No.: RZA2010-1485-2 TESTING No. L2264 OET 65 TEST REPORT Product Name HUAWEI Ideos Tablet S7 Model S7-104 FCC ID QISS7-104 Client Huawei Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name HUAWEI Ideos Tablet S7 Model S7-104 FCC ID QISS7-104 Report No. RZA2010-1485-2 Client Huawei Technologies Co., Ltd. Manufacturer Huawei Technologies Co., Ltd. Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions KDB 248227 D01 SAR meas for 802 11 a b g v01r02: SAR Measurement Procedures for 802.11a/b/g Transmitters KDB 616217 D03 SAR Supp Note and Netbook Laptop v01: SAR Evaluation Considerations for Laptop/Notebook/Netbook and Tablet Computers - supplement to KDB 616217. KDB 447498 D01 Mobile Portable RF Exposure v04: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: September 28 th , 2010 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Xue Chaofeng TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 3 of 148 TABLE OF CONTENT 1. General Information ........................................................................................................................ 5 1.1. Notes of the Test Report.......................................................................................................... 5 1.2. Testing Laboratory ................................................................................................................... 5 1.3. Applicant Information ............................................................................................................... 6 1.4. Manufacturer Information ......................................................................................................... 6 1.5. Information of EUT................................................................................................................... 7 1.6. The Maximum SAR 1g Values and Power of Each Tested Band............................................... 8 1.7. Test Date ................................................................................................................................. 8 2. Operational Conditions during Test ................................................................................................. 9 2.1. General Description of Test Procedures .................................................................................. 9 2.2. GSM Test Configuration ........................................................................................................... 9 2.3. WCDMA Test Configuration ................................................................................................... 11 2.4. HSDPA Test Configuration ..................................................................................................... 11 2.5. HSUPA Test Configuration ..................................................................................................... 13 2.6. WIFI Test Configuration .........................................................................................................15 2.7. Position of Module in Portable Devices.................................................................................. 16 3. SAR Measurements System Configuration ................................................................................... 17 3.1. SAR Measurement Set-up .....................................................................................................17 3.2. DASY5 E-field Probe System ................................................................................................ 18 3.2.1. EX3DV4 Probe Specification .......................................................................................... 18 3.2.2. E-field Probe Calibration ................................................................................................. 19 3.3. Other Test Equipment ............................................................................................................19 3.3.1. Device Holder for Transmitters ....................................................................................... 19 3.3.2. Phantom .........................................................................................................................20 3.4. Scanning Procedure ..............................................................................................................20 3.5. Data Storage and Evaluation ................................................................................................. 22 3.5.1. Data Storage...................................................................................................................22 3.5.2. Data Evaluation by SEMCAD ......................................................................................... 22 3.6. System Check........................................................................................................................ 25 3.7. Equivalent Tissues ................................................................................................................. 26 4. Laboratory Environment......................................................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 101 of 148 ANNEX D: Probe Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 102 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 103 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 104 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 105 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 106 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 107 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 108 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 109 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 110 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 111 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 112 of 148 ANNEX E: D835V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 113 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 114 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 115 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 116 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 117 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 118 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 119 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 120 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 121 of 148 ANNEX F: D1900V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 122 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 123 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 124 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 125 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 126 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 127 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 128 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 129 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 130 of 148 ANNEX G: D2450V2 Dipole Calibration Certificate

TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 131 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 132 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 133 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 134 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 135 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 136 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 137 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 138 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 139 of 148 ANNEX H: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 140 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 141 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 142 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 143 of 148

Report No.: RZA2010-1485-2 TESTING No. L2264 OET 65 TEST REPORT Product Name HUAWEI Ideos Tablet S7 Model S7-104 FCC ID QISS7-104 Client Huawei Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name HUAWEI Ideos Tablet S7 Model S7-104 FCC ID QISS7-104 Report No. RZA2010-1485-2 Client Huawei Technologies Co., Ltd. Manufacturer Huawei Technologies Co., Ltd. Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions KDB 248227 D01 SAR meas for 802 11 a b g v01r02: SAR Measurement Procedures for 802.11a/b/g Transmitters KDB 616217 D03 SAR Supp Note and Netbook Laptop v01: SAR Evaluation Considerations for Laptop/Notebook/Netbook and Tablet Computers - supplement to KDB 616217. KDB 447498 D01 Mobile Portable RF Exposure v04: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: September 28 th , 2010 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Xue Chaofeng TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 3 of 148 TABLE OF CONTENT 1. General Information ........................................................................................................................ 5 1.1. Notes of the Test Report.......................................................................................................... 5 1.2. Testing Laboratory ................................................................................................................... 5 1.3. Applicant Information ............................................................................................................... 6 1.4. Manufacturer Information ......................................................................................................... 6 1.5. Information of EUT................................................................................................................... 7 1.6. The Maximum SAR 1g Values and Power of Each Tested Band............................................... 8 1.7. Test Date ................................................................................................................................. 8 2. Operational Conditions during Test ................................................................................................. 9 2.1. General Description of Test Procedures .................................................................................. 9 2.2. GSM Test Configuration ........................................................................................................... 9 2.3. WCDMA Test Configuration ................................................................................................... 11 2.4. HSDPA Test Configuration ..................................................................................................... 11 2.5. HSUPA Test Configuration ..................................................................................................... 13 2.6. WIFI Test Configuration .........................................................................................................15 2.7. Position of Module in Portable Devices.................................................................................. 16 3. SAR Measurements System Configuration ................................................................................... 17 3.1. SAR Measurement Set-up .....................................................................................................17 3.2. DASY5 E-field Probe System ................................................................................................ 18 3.2.1. EX3DV4 Probe Specification .......................................................................................... 18 3.2.2. E-field Probe Calibration ................................................................................................. 19 3.3. Other Test Equipment ............................................................................................................19 3.3.1. Device Holder for Transmitters ....................................................................................... 19 3.3.2. Phantom .........................................................................................................................20 3.4. Scanning Procedure ..............................................................................................................20 3.5. Data Storage and Evaluation ................................................................................................. 22 3.5.1. Data Storage...................................................................................................................22 3.5.2. Data Evaluation by SEMCAD ......................................................................................... 22 3.6. System Check........................................................................................................................ 25 3.7. Equivalent Tissues ................................................................................................................. 26 4. Laboratory Environment......................................................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 131 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 132 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 133 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 134 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 135 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 136 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 137 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 138 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 139 of 148 ANNEX H: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 140 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 141 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 142 of 148 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-1485-2 Page 143 of 148

FCC Test Report Product Name: HUAWEI Ideos Tablet S7 Model Number: S7-104 Report No: SYBHZ(R)E050092010EB -2 FCC ID: QISS7-104 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of S7-104 FCC ID: QISS7-104 Security Level: Public Report No: SYBHZ(R)E050092010EB -2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total34 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons resp…

Text truncated - open the document above for the full version.