QISS7-931WHUAWEI MediaPad 7 Lite

HUAWEI MediaPad 7 Lite Quick Start 1 1 For More Help For more help, go to http://www.huaweidevice.com to download the User Guide. To find the User Guide of your tablet quickly, enter HUAWEI MediaPad 7 Lite in the webpage search box. Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline and email address in your country or region. The figures in this guide are provided for your reference only. The appearance and display features may vary slightly depending on the actual product version. 2 2 HUAWEI MediaPad 7 Lite at a Glance 1 Front camera 2 Rear camera 3 Speaker 4 Power key 5 Volume keys 6 microSD card slot 7 Earphone or microphone jack 8 Micro USB port 9 Microphone 3 3 Installing the microSD Card 1. Remove the back cover. 2. Install the microSD card 3. Replace the back cover. Do not remove the cover for the main camera. 4 4 Powering On and Off To power on your HUAWEI MediaPad 7 Lite, press and hold the power key until HUAWEI MediaPad 7 Lite vibrates. To power off HUAWEI MediaPad 7 Lite,press and hold the power key until a dialog box appears, and follow the onscreen instructions. To restart HUAWEI MediaPad 7 Lite when it is in standby mode or malfunctions, press and hold the power key for about 10 seconds until the display turns off. Then press and hold the power key until HUAWEI MediaPad 7 Lite vibrates. 5 Locking the Screen When your HUAWEI MediaPad 7 Lite is turned on, press the Power button to lock the screen. If your HUAWEI MediaPad 7 Lite is idle for a preset period of time, the screen will lock automatically. 6 Unlocking the Screen 1. Press the Power button to wake up the screen. 2. Drag the lock icon to the icon on the right. 5 7 Gestures The multi-touch screen and simple finger gestures make it easy to use your device. 1 Touch Touch once to select an item or start an application. 2 Touch and hold Touch and hold an item for 2 seconds or more to access the options menu for the current screen. 3 Double-touch Touch twice. 4 Drag “Grab” an item, move it to the desired location, and release it. 5 Flick Quickly swipe a finger across the screen up, down left, right, or any other direction to navigate a list or screen. 6 6 Pinch out Put two fingers together and have them touch th screen. Glide them apart with continuous contact on the screen to zoom in on a view. 7 Pinch in Touch the screen with two separated fingers. Glide them toward each other with continuous contact on the screen to zoom out. 8 Warnings and Precautions To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories. Basic Requirements During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair. Without authorization, no organization or individual can change the mechanical, safety, or performance design of the device. When using the device, observe all applicable laws and regulations and respect the legal rights of other people. Environmental Requirements for Using the Device Keep the device far from sources of heat and fire, such as a heater or a candle. Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator. 7 Place the device on a stable surface. Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight. Keep the ambient temperature between 0°C and 35°C while the device is being charged. Keep the ambient temperature between 0°C to 35°C for using the device powered by a battery. Do not place any object (such as a candle or a water container) on the device. If any foreign object or liquid enters the device, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes. Traffic Security Observe local laws and regulations while using the device. In addition, if using the device while driving a vehicle, comply with the following guidelines: Concentrate on driving. Your first responsibility is to drive safely. Do not talk on the device while driving. Use hands-free accessories. When you have to make or answer a call, park the vehicle at the road side before using your device. RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates. Do not use your device while flying in an aircraft. Power off your device before boarding an aircraft. Using 8 wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Precautions for Using Wireless Devices The device complies with the RF specifications when the device is used in portable exposure conditions or at a distance of 1.5 cm from your body. Do not use the device where using wireless devices is prohibited or may cause interference or danger. The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device. Do not take the device into operating rooms, intensive care units (ICUs), or coronary care units (CCUs). Areas with Inflammables and Explosives Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, e…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. I appoint Intertek Testing Services NA Inc. to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under the FCC rules until further notice. I further certify that no party (as defined in 1.2002 of CFR 47, 2007) to this application, including myself, is subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,853A. Equipment: S7-931w, FCC ID: QISS7-931W Date:2012-09-10. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: Intertek Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISS7-931W to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co.,Ltd. Federal Communications Commission 2012-09-04 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISS7-931W To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2013-03-03: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

Declaration Manufacturer/Application:Huawei Technologies Co.,Ltd FCC ID:QISS7-931W I declare that the shielded USB cable used in the test will be marketed with the EUT. Yours sincerely, Product Manager: Email: [email protected] Tel: 02759599243 Huawei Technologies Co.,Ltd

HUAWEI MediaPad 7 Lite SECRET Page1, Total4 Photo documentation of external of product HUAWEI MediaPad 7 Lite SECRET Page2, Total4 HUAWEI MediaPad 7 Lite SECRET Page3, Total4 HUAWEI MediaPad 7 Lite SECRET Page4, Total4

HUAWEI MediaPad 7 Lite SECRET Page1, Total 1

HUAWEI MediaPad 7 Lite SECRET Page1, Total 1 Label Location

HUAWEI MediaPad 7 Lite SECRET Page1, Total8 Photo documentation of interior of product HUAWEI MediaPad 7 Lite SECRET Page2, Total8 HUAWEI MediaPad 7 Lite SECRET Page3, Total8 HUAWEI MediaPad 7 Lite SECRET Page4, Total8 HUAWEI MediaPad 7 Lite SECRET Page5, Total8 HUAWEI MediaPad 7 Lite SECRET Page6, Total8 HUAWEI MediaPad 7 Lite SECRET Page7, Total8 HUAWEI MediaPad 7 Lite SECRET Page8, Total8

Report No.:SYBH (Z-SAR) 0 17072012-2 FCC ID:QISS7-931W Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D2450-EX-Body Date/Time: 8/15/2012 8:31:13 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D2450-EX-Body DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; σ = 1.989 mho/m; ε r = 51.871; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(7.5, 7.5, 7.5); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/d=10mm, Pin=250mW/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 13.7 mW/g Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 46.201 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 31.707 mW/g SAR(1 g) = 13.7 mW/g; SAR(10 g) = 6.11 mW/g Maximum value of SAR (measured) = 15.0 mW/g 0 dB = 13.7 mW/g = 22.74 dB mW/g

Report No.:SYBH (Z-SAR) 017072012-2 FCC ID:QISS7-931W Appendix B. SAR Measurement Plots Table of contents WiFi(802.11b) 2450 MHz Body Date/Time: 8/15/2012 8:55:37 Test Laboratory: HUAWEI SAR Lab S7-931w WiFi 11b 6CH Rear Side 0mm DUT: S7-931w; Type: HUAWEI MediaPad 7 Lite; Serial: SAR1 Communication System: WiFi (802.11*); Frequency: 2437 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.986 mho/m; ε r = 51.987; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(7.5, 7.5, 7.5); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Body/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.665 mW/g Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.244 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 1.574 mW/g SAR(1 g) = 0.583 mW/g; SAR(10 g) = 0.254 mW/g Maximum value of SAR (measured) = 0.685 mW/g 0 dB = 0.665 mW/g = -3.55 dB mW/g Date/Time: 8/15/2012 9:59:39 Test Laboratory: HUAWEI SAR Lab S7-931w WiFi 11b 6CH Right Side 0mm DUT: S7-931w; Type: HUAWEI MediaPad 7 Lite; Serial: SAR1 Communication System: WiFi (802.11*); Frequency: 2437 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.986 mho/m; ε r = 51.987; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(7.5, 7.5, 7.5); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.6(6824) Configuration/Body/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.517 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.175 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 1.427 mW/g SAR(1 g) = 0.614 mW/g; SAR(10 g) = 0.245 mW/g Maximum value of SAR (measured) = 0.722 W/kg 0 dB = 0.722 W/kg = -2.83 dB W/kg Date/Time: 8/15/2012 9:24:04 Test Laboratory: HUAWEI SAR Lab S7-931w WiFi 11b 6CH Top Side 0mm DUT: S7-931w; Type: HUAWEI MediaPad 7 Lite; Serial: SAR1 Communication System: WiFi (802.11*); Frequency: 2437 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2437 MHz; σ = 1.986 mho/m; ε r = 51.987; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(7.5, 7.5, 7.5); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Body/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.297 mW/g Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.630 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.607 mW/g SAR(1 g) = 0.255 mW/g; SAR(10 g) = 0.107 mW/g Maximum value of SAR (measured) = 0.298 mW/g 0 dB = 0.297 mW/g = -10.55 dB mW/g

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Project Name: _______________________ Model : _______________________ FCC ID : _______________________ Report No. : _______________________ APPROVED (Lab Manager) CHECKED PREPARED BY DATE 2012-09-11 2012-09-11 2012-09-11 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. S7-931w QISS7-931W SYBH(Z-SAR) 017072012-2 HUAWEI MediaPad 7 Lite Report No.:SYBH(Z-SAR)017072012-2 FCC ID:QISS7-931W 2012-09-11 Page 2 of 24 Table of Contents 1 General Information ............................................................................................................................................................ 4 1.1 Statement of Compliance .......................................................................................................................................... 4 1.2 RF exposure limits...................................................................................................................................................... 4 1.3 EUT Description ......................................................................................................................................................... 5 1.3.1 General Description ........................................................................................................................................... 5 1.4 Test specification(s) .................................................................................................................................................. 6 1.5 Testing laboratory ....................................................................................................................................................... 6 1.6 Applicant and Manufacturer ...................................................................................................................................... 6 1.7 Application details ...................................................................................................................................................... 6 1.8 Ambient Condition ..................................................................................................................................................... 6 2 SAR Measurement System ............................................................................................................................................. 7 2.1 SAR Measurement Set-up ....................................................................................................................................... 7 2.2 Test environment ........................................................................................................................................................ 8 2.3 Data Acquisition Electronics description ................................................................................................................ 8 2.4 Probe description ....................................................................................................................................................... 9 2.5 Phantom description ................................................................................................................................................ 10 2.6 Device holder description ........................................................................................................................................ 10 2.7 Test Equipment List ................................................................................................................................................. 11 3 SAR Measurement Procedure ...................................................................................................................................... 12 3.1 Scanning procedure ................................................................................................................................................. 12 3.2 Spatial Peak SAR Evaluation ................................................................................................................................. 13 3.3 Data Storage and Evaluation .................................................................................................................................. 14 4 System Verification Procedure ........................................................................................................................................ 16 4.1 Tissue Verification .................................................................................................................................................... 16 4.2 System Check ........................................................................................................................................................... 17 4.3 Validation Procedure................................................................................................................................................ 17 5 Measurement Uncertainty Evaluation .......................................................................................................................... 18 5.1 Measurement uncertainty evaluation for SAR test .............................................................................................. 18 5.2 Measurement uncertainty evaluation for system validation .....................................................................…

Text truncated - open the document above for the full version.

Justification of the extended calibration of Dipole D2450V2 SN: 860 Per KDB 450824, we have Measured the Impedance and Return Loss as below, and the return loss is <-20dB, with 20% of prior calibration; the real or imaginary parts of the impedance is with 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Calibration Date 2011-03-08 Measured Date 2012-03-07 Dipole2450 Head TST Target Value Measured Value Difference Impedance transformed to feed point 54.0Ω+2.2jΩ 54.1Ω+2.36jΩ R=0.1Ω, X=0.16Ω Return Loss -27.2dB -27.34dB -0.51% Dipole2450 Body TST Target Value Measured Value Difference Impedance transformed to feed point 49.0Ω+4.9jΩ 49.48Ω+5.13jΩ R=0.48Ω, X=0.23Ω Return Loss - 26.0dB -26.38dB -1.46% Measured Date 2011-03-08 2012-03-07 ------- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

FCC RF Test Report Product Name: HUAWEI MediaPad 7 Lite Model Number: S7-931w Report No: SYBH(Z-RF)006082012-2003 FCC ID:QISS7-931W Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Page2, Total30 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Page3, Total30 REGULATION FCC CFR47 Part 2:2011: Subpart J; FCC CFR47 Part 15:2011: Subpart C; ANSI C63.10:2009 START OF TEST Aug., 27, 2012 END OF TEST Aug.,28, 2012 Final Judgement Pass Approved By Senior Engineer Aug., 30, 2012 Dai Linjun Date Name Signature Reviewed By Aug., 30 2012 Cousy Xu Date Name Signature Operated By Aug., 30 2012 Huang Qiuliang Date Name Signature FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Page4, Total30 Contents 1 Summary .....................................................................................................................................................5 2 Product Description ...................................................................................................................................6 2.1 PRODUCTION INFORMATION ....................................................................................................................6 2.2 MODIFICATION INFORMATION ..................................................................................................................7 3 Test Site Description ..................................................................................................................................8 4 Test Modes .................................................................................................................................................8 5 Product Description ...................................................................................................................................9 5.1 TECHNICAL CHARACTERISTICS ................................................................................................................9 5.2 EUT IDENTIFICATION LIST .....................................................................................................................11 6 Main Test Instruments .............................................................................................................................13 7 Transmitter Measurements .....................................................................................................................14 7.1 BANDWIDTH MEASUREMENT ..................................................................................................................14 7.2 PEAK OUTPUT POWER ..........................................................................................................................16 7.3 BAND EDGE SPURIOUS EMISSION ...........................................................................................................18 7.4 CONDUCTED RF SPURIOUS ...................................................................................................................20 7.5 POWER SPECTRAL DENSITY ..................................................................................................................22 7.6 RADIATED SPURIOUS EMISSION & SPURIOUS IN RESTRICTED BAND ..........................................................24 7.7 CONDUCTED EMISSION AT POWER PORT ...............................................................................................27 8 System Measurement Uncertainty ..........................................................................................................29 9 Appendices ...............................................................................................................................................30 FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Page5, Total30 1 Summary The table below summarizes the measurements and results for the EUT. Detailed results and descriptions are shown in the following pages. Table 1 Summary of results FCC Measurement Specification Description Result 15.247 (a) (2) Bandwidth measurement PASS 15.247 (b) (3) Conducted Peak output power PASS 15.247 (d) Band edge compliance measurement PASS 15.247 (d) Conducted RF spurious PASS 15.247 (e) Power spectral density PASS 15.247 (d) / 15.205 & 15.209 Radiated spurious emission & Radiated restricted band measurement PASS 15.207 Conducted emission test for power port PASS FCC RF Test Report of S7-931w FCC ID : QISS7…

Text truncated - open the document above for the full version.

FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total10 Appendix A 6dB bandwidth measurement According to FCC Part 15.247 (a) (2) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total10 TM1 Channel 1 (2412MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total10 Channel 6 (2437MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total10 Channel 11 (2462MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total10 TM2 Channel 1 (2412MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page6, Total10 Channel 6 (2437MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page7, Total10 Channel 11 (2462MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page8, Total10 TM3 Channel 1 (2412MHz) FCC RF Test Report of S7-931w FCC ID : QISS7-931W Security Level: Public Report No: SYBH(Z-RF)006082012-2003 Confidential Information of Hu…

Text truncated - open the document above for the full version.