QISSCL-L01Smart Phone

Quick Start Guide Y6 For more information Read the Quick Start Guide included with your device. Go to http://consumer.huawei.com/en/ to download the user guide for your device and read the FAQ, privacy policy, and ot he r i nformation. Go to Settings > About phone > Legal information to read the legal information. All pictures and illustrations in this guide, including but not limited to the phone color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. Your phone at a glance Before you start, let's take a look at your new phone. Press and hold the power button to turn your phone on or off. To forcibly restart your phone, press and hold the power button until your phone vibrates. Power button Volume button Headset jack Micro USB port Front Camera Status indicator Microphone Light sensor Earpiece Speaker ReturnRecent Home Getting started Follow the instructions in the following figures to set up your phone. Do not insert or remove a SIM card while your phone is on. Caution Insert the SIM card into the correct card slot to ensure that it can be recognized by the phone. Open the battery cover. Insert the SIM card. 1 Insert the microSD card (optional). Install the battery. Install the battery cover. 3 5 2 4 a b a b Insert the SIM card. 2 SCL-L03 SCL-U03 SCL-U23 Micro SIM Micro SIM Micro SIM microSD Locking and unlocking the screen Press the power button to lock the screen. If your phone is idle for a specified period of time, the screen will automatically lock itself. If the screen is off, press the power butt on to turn it on. Slide your finger in any direction to unlock the screen. You can also quickly launch commonly used applications without unlocking the screen. Calling and messaging Touch to make a call using the dialer. You can also touch a phone numbe r in your contacts, or a number in a message, email, web page, or other source to place a call. Touch to send a text or multimedia message. You can save photos, audio clips, videos, and othe r attachments from received multimedia messages. Camera Touch . Frame the scene you want to capture. Let your camera focus automatically or touch the screen to focus on a specific object. Then touch to take a photo. Swipe left or right to switch between different capture modes. Time-lapse mode lets you r ec o rd the slow transformation of objects or scenes, such as a blooming flower or the setting sun. Internet connection You can access the Internet over Wi-Fi or a mobile data network. Swipe down from the status bar to open the n otification panel. Touch to turn on mobile data. Touch and hold to go to the Wi-Fi settings screen. Turn on Wi -Fi and connect to a Wi- Fi network. Backing up data Touch . Touch to open the settings menu. You can set how often y ou want to back up your data by following the onscreen instructions. Touch and select the data that you want to back up, such as your contacts, me ssages, and photos. Then follow the onscreen instructions to complete the backup. Phone manager Touch . You can quickly scan your phone for potential risks wi th one touch. Follow the onscreen instructions to use one-touch optimization, or manually clean the system storage and manage your applications. Touch the options on the screen to clean your system trash, set the harassment filter, activate power saving mode, manage your applications' notification permissions, and more. Screen off gestures Touch and then . Turn on screen off gestures. When the screen is off, you can turn it on or open an app using a predefined gesture. Personal Information and Data Security The use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming accessible to others. Several measures are recommended to help you protect personal and confidential information. • Place your device in a safe area to prevent it from unauthorized use. • Set your device screen to lock and create a password or unlock pattern to open it. • Periodically back up personal information kept on your SIM card, memory card, or stored in your device memory. If you change to a different device, be sure to move or delete any personal information on your old device. • If you are worried about viruses when you receive messages or emails from a stranger, you can delete them without opening them. • If you use your device to browse the Internet, avoid websites that might pose a security risk to avoid theft of your personal information. • If you use services such as Wi-Fi tether or Bluetooth, set passwords for these services to prevent unauthorized access. When these services are not in use, turn them off. • Install or upgrade device security software and regularly scan for viruses. • Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications should be scanned for viruses. • Install security software or patches released by Huawei or third-party application providers. • Some applications require and transmit location information. As a result, a third-party may be able to share your location information. • Your device may provide detection and diagnostic information to third-party application providers. Third party vendors use this information to improve their products and services. • If you have concerns about the security of your personal information and data, please contact [email protected]. Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment • Follow rules and regulations set forth by hospitals and health care f…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2015-9-18 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISSCL-L01 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2015-12-31: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Tel: 0086-0755-28970299 Fax: 0086-0755-89650226

HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 9/17/2015 Page1,Total 2 External Photos of HUAWEI SCL-L01, SCL-L01 HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 9/17/2015 Page2,Total 2

HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 2015-09-17 Page1, Total6 Internal Photos of HUAWEI SCL-L01, SCL-L01 HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 2015-09-17 Page2, Total6 HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 2015-09-17 Page3, Total6 HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 2015-09-17 Page4, Total6 HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 2015-09-17 Page5, Total6 HUAWEI SCL-L01, SCL-L01 Smart Phone SECRET 2015-09-17 Page6, Total6

Report No.:SYBH(Z-SAR)017082015-2 FCC ID:QISSCL-L01 Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D835-EX-Head SystemPerformanceCheck-D835-EX-Body SystemPerformanceCheck-D1900-EX-Head SystemPerformanceCheck-D1900-EX-Body SystemPerformanceCheck-D2450-EX-Head SystemPerformanceCheck-D2450-EX-Body SystemPerformanceCheck-D2600-EX-Head SystemPerformanceCheck-D2600-EX-Body Date: 2015-8-30 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Head DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d126 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.901 S/m; ε r = 40.476; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(9.92, 9.92, 9.92); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.52 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.53 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 3.50 W/kg SAR(1 g) = 2.43 W/kg; SAR(10 g) = 1.6 W/kg Maximum value of SAR (measured) = 2.83 W/kg 0 dB = 2.52 W/kg = 4.01 dBW/kg Date: 2015-9-1 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-EX-Body DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d126 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 1.006 S/m; ε r = 56.693; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(9.42, 9.42, 9.42); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=15mm, Pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.54 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 51.16 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(1 g) = 2.44 W/kg; SAR(10 g) = 1.63 W/kg Maximum value of SAR (measured) = 2.82 W/kg 0 dB = 2.54 W/kg = 4.05 dBW/kg Date: 2015-9-2 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Head DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.426 S/m; ε r = 39.662; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(8.12, 8.12, 8.12); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm pin=250mW/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.1 W/kg Configuration/d=10mm pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 87.28 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 17.6 W/kg SAR(1 g) = 10.2 W/kg; SAR(10 g) = 5.37 W/kg Maximum value of SAR (measured) = 12.8 W/kg 0 dB = 10.1 W/kg = 10.04 dBW/kg Date: 2015-9-1 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-EX-Body DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.536 S/m; ε r = 51.776; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(7.82, 7.82, 7.82); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm pin=250mW/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.2 W/kg Configuration/d=10mm pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 87.24 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 17.8 W/kg SAR(1 g) = 10.5 W/kg; SAR(10 g) = 5.57 W/kg Maximum value of SAR (measured) = 13.3 W/kg 0 dB = 10.2 W/kg = 10.09 dBW/kg Date: 2015-9-2 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D2450-EX-Head DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.846 S/m; ε r = 38.862; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(7.28, 7.28, 7.28); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/d=10mm, Pin=250mW/Area Scan (6x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 16.4 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 88.43 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 26.5 W/kg SAR(1 g) = 13.6 W/kg; SAR(10 g) = 6.47 W/kg Maximum value of SAR (measured) = 17.8 W/kg 0 dB = 16.4 W/kg = 12.15 dBW/kg Date: 2015-9-2 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D2450-EX-Body DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium paramet…

Text truncated - open the document above for the full version.

Report No.:SYBH(Z-SAR)017082015-2 FCC ID:QISSCL-L01 Appendix B. SAR Measurement Plots Table of contents GSM850 Head GSM850 Body GSM1900 Head GSM1900 Body LTE Band VII Head LTE Band VII Body WiFi 2450 MHz Head WiFi 2450 MHz Body Date: 2015-8-31 Test Laboratory: HUAWEI SAR/HAC Lab SCL-L01 GSM850 251CH Left hand touch cheek with battery 2# DUT: HUAWEI SCL-L01; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 848.8 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 849 MHz; σ = 0.915 S/m; ε r = 40.276; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(9.92, 9.92, 9.92); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.314 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.634 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.359 W/kg SAR(1 g) = 0.294 W/kg; SAR(10 g) = 0.224 W/kg Maximum value of SAR (measured) = 0.320 W/kg 0 dB = 0.314 W/kg = -5.03 dBW/kg Date: 2015-9-1 Test Laboratory: HUAWEI SAR/HAC Lab SCL-L01 GSM850 190CH Back Side 15mm with battery 2# DUT: HUAWEI SCL-L01; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 1.007 S/m; ε r = 56.626; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(9.42, 9.42, 9.42); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.524 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.90 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 0.563 W/kg SAR(1 g) = 0.470 W/kg; SAR(10 g) = 0.366 W/kg Maximum value of SAR (measured) = 0.509 W/kg 0 dB = 0.524 W/kg = -2.81 dBW/kg Date: 2015-9-1 Test Laboratory: HUAWEI SAR/HAC Lab SCL-L01 GSM850 GPRS 2TS 190CH Back side 10mm DUT: HUAWEI SCL-L01; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-2TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:4.10015 Medium parameters used: f = 837 MHz; σ = 1.007 S/m; ε r = 56.626; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(9.42, 9.42, 9.42); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.561 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.51 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.608 W/kg SAR(1 g) = 0.513 W/kg; SAR(10 g) = 0.401 W/kg Maximum value of SAR (measured) = 0.552 W/kg 0 dB = 0.561 W/kg = -2.51 dBW/kg Date: 2015-9-2 Test Laboratory: HUAWEI SAR/HAC Lab SCL-L01 GSM1900 810CH Left hand touch cheek with battery 2# DUT: HUAWEI SCL-L01; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 1909.8 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 1910 MHz; σ = 1.432 S/m; ε r = 39.621; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(8.12, 8.12, 8.12); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.257 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.910 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.320 W/kg SAR(1 g) = 0.216 W/kg; SAR(10 g) = 0.138 W/kg Maximum value of SAR (measured) = 0.248 W/kg 0 dB = 0.257 W/kg = -5.90 dBW/kg Date: 2015-9-1 Test Laboratory: HUAWEI SAR/HAC Lab SCL-L01 GSM1900 661CH Back Side 15mm DUT: HUAWEI SCL-L01; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 1880 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 1880 MHz; σ = 1.516 S/m; ε r = 51.896; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN7350; ConvF(7.82, 7.82, 7.82); Calibrated: 2015-1- 8; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn852; Calibrated: 2015-4-27 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Body/Area Scan (9x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.185 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.139 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.271 W/kg SAR(1 g) = 0.166 W/kg; SAR(10 g) = 0.094 W/kg Maximum value of SAR (measured) = 0.203 W/kg 0 dB = 0.185 W/kg = -7.33 dBW/kg Date: 2015-9- 1 Test Laboratory: HUAWEI SAR/HAC Lab SCL-L01 GSM1900 GPRS 2TS 661CH Back Side 10mm DUT: HUAWEI SCL-L01; Type: Smart Phone; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-2TS (0); Frequency: 1880 MHz;Duty Cycle: 1:4.10015 Medium parameters used: f = 1880 MHz; σ = 1.516 S/m; ε r = 51.896; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Config…

Text truncated - open the document above for the full version.

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Product Name: Smart Phone Model: HUAWEI SCL-L01, SCL-L01 Report No.: SYBH(Z-SAR)017082015-2 FCC ID: QISSCL-L01 APPROVED (Lab Manager) PREPARED (Test Engineer) BY DATE 2015-09-11 2015-09-11 The test results of this test report relate exclusively to the item(s) tested . The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report No.: SYBH(Z-SAR)017082015-2 FCC ID:QISSCL-L01 2015-09-11 Page 2 of 47 Table of Contents Table of Contents ......................................................................................................................................................... 2 1 General Information ............................................................................................................................................... 4 1.1 Statement of Compliance ...................................................................................................................... 4 1.2 RF exposure limits ................................................................................................................................. 5 1.3 EUT Description ..................................................................................................................................... 6 1.3.1 General Description ............................................................................................................................... 7 1.4 Test specification(s) .............................................................................................................................. 8 1.5 Testing laboratory .................................................................................................................................. 8 1.6 Applicant and Manufacturer ................................................................................................................... 8 1.7 Application details .................................................................................................................................. 8 1.8 Ambient Condition ................................................................................................................................. 8 2 SAR Measurement System ................................................................................................................................... 9 2.1 SAR Measurement Set-up ..................................................................................................................... 9 2.2 Test environment ................................................................................................................................. 10 2.3 Data Acquisition Electronics description ............................................................................................. 10 2.4 Probe description ................................................................................................................................. 11 2.5 Phantom description ............................................................................................................................ 12 2.6 Device holder description .................................................................................................................... 13 2.7 Test Equipment List ............................................................................................................................. 14 3 SAR Measurement Procedure ............................................................................................................................ 15 3.1 Scanning procedure ............................................................................................................................. 15 3.2 Spatial Peak SAR Evaluation .............................................................................................................. 16 3.3 Data Storage and Evaluation ............................................................................................................... 17 4 System Verification Procedure ............................................................................................................................ 19 4.1 Tissue Verification ................................................................................................................................ 19 4.2 System Check ...................................................................................................................................... 22 4.3 System check Procedure ..................................................................................................................... 23 5 SAR measurement variability and uncertainty .................................................................................................... 24 5.1 SAR measurement variability .............................................................................................................. 24 5.2 SAR measurement uncertainty ............................................................................................................ 24 6 SAR Test Configuration ....................................................................................................................................... 25 6.1 3G SAR Test Reduction Procedure ..................................................................................................... 25 6.2 GSM Test Configuration .........................................................................…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: Smart Phone Model Number: HUAWEI SCL-L01, SCL-L01 Report No: SYBH(Z-RF)010082015-2001 FCC ID：QISSCL-L01 Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 RF Test Report of HUAWEI SCL-L01, SCL-L01 Report No: SYBH(Z-RF)010082015-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 23 Notice 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-2. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of HUAWEI SCL-L01, SCL-L01 Report No: SYBH(Z-RF)010082015-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 23 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2015-08-25 Start Date of Test: 2015-08-26 End Date of Test: 2015-09-05 Test Result: Pass Approved by Senior Engineer: 2015-09-11 Liu Chunlin Date Name Signature Prepared by: 2015-09-11 maowenli Date Name Signature RF Test Report of HUAWEI SCL-L01, SCL-L01 Report No: SYBH(Z-RF)010082015-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 23 Modification Record No. Last Report No. Modification Description 1 First report. RF Test Report of HUAWEI SCL-L01, SCL-L01 Report No: SYBH(Z-RF)010082015-2001 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 23 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ......................................................…

Text truncated - open the document above for the full version.