QIST1-A22LHuawei MediaPad T1 10

Quick Start 1 1 HUAWEI MediaPad T1 10 at a Glance Congratulations on your purchase of the HUAWEI MediaPad T1 10. Press and hold the power key to power on or off your device or restart it. Press the power key once to turn on or off the screen. 2 2 Installing the SIM and microSD Cards 3 3 Charging the Battery 4 4 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices. Interference with medical equipment  Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where prohibited.  Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service provider for more information.  Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. Protecting your hearing when using a headset  To prevent possible hearing damage, do not listen at high volume levels for long periods. 5  Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume to a safe and comfortable level.  Exposure to high volumes while driving may cause distraction and increase your risk of an accident. Areas with flammables and explosives  Do not use the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. In addition, follow the instructions indicated in text or symbols.  Do not store or transport the device in containers with flammable liquids, gases, or explosives. Traffic security  Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.  Concentrate on driving. Your first responsibility is to drive safely.  Do not hold the device while driving. Use hands-free accessories.  When you must make or answer a call, pull off the road safely and park the vehicle first.  RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.  Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may hurt you because of the strong force when the air bag inflates. 6  Do not use your device while flying in an aircraft or immediately before boarding. Using wireless devices in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. Operating environment  Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.  Do not use your device during thunderstorms to protect your device against any danger caused by lightning.  Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -40 °C to 70 °C. Extreme heat or cold may damage your device or accessories.  Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods.  To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.  Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle.  Do not place sharp metal objects, such as pins, near the earpiece or speaker. The earpiece may attract these objects and result in injury.  Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated device for an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur.  Do not touch the device's antenna. Otherwise, communication quality may be reduced. 7  Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or explosion.  Observe local laws and regulations, and respect the privacy and legal rights of others. Child's safety  Comply with all precautions with regard to child's safety. Letting children play with the device or its accessories may be dangerous. The device includes detachable parts that may present a choking hazard. Keep away from children.  The device and its accessories are not intended for use by children. Children should only use the device with adult supervision. Accessories  Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other hazards.  Choose only accessories approved for use with this model by the device manufacturer. The use of any other types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Charger safety  For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.  Unplug the charger from electrical outlets and the device when not in use.  Do not drop or cause an impact to the charger. 8  If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.  Do not touch the power cord with wet hands or pull the power cord to disconnect the charger.  Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.  If your charger has been exposed to water, other liquids, or excessive moisture, take i…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2015-11-13 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QIST1-A22L To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2016-02-28: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755- 28970299

SECRET Page1, Total4 Photo documentation of external of product SECRET Page2, Total4 SECRET Page3, Total4 SECRET Page4, Total4

HUAWEI MediaPad T1 10 SECRET Page1, Total4 Photo documentation of interior of product HUAWEI MediaPad T1 10 SECRET Page2, Total4 HUAWEI MediaPad T1 10 SECRET Page3, Total4 HUAWEI MediaPad T1 10 SECRET Page4, Total4

FCC RF Test Report Product Name: HUAWEI MediaPad T1 10 Model Number: T1-A22L Report No: SYBH(Z-RF)023092015-2003 FCC ID: QIST1-A22L Reliability Laboratory of Huawei Technologies Co., Ltd. Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 Notice RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 20 1. The laboratory has Passed the accreditation by China National Accreditation Service for Conformity Assessment (CNAS). The accreditation number is L0310. 2. The laboratory has Passed the accreditation by The American Association for Laboratory Accreditation (A2LA). The accreditation number is 2174.01. 3. The laboratory has been listed by the US Federal Communications Commission to perform electromagnetic emission measurements. The site recognition number is 97456. 4. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 6369A-2. 5. The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. The test report is only valid for the test samples. 8. Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 20 Applicant: Huawei Technologies Co., Ltd. Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Date of Receipt Sample: 2015-09-22 Start Date of Test: 2015-09-23 End Date of Test: 2015-10-10 Test Result: Pass Approved by Senior Engineer: 2015-10-12 Liu Chunlin Date Name Signature Prepared by: 2015-10-12 Wu Tingsi Date Name Signature RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 20 Modification Record No. Last Report No. Modification Description First report RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 20 CONTENT 1 General Information ................................................................................................................................................ 6 1.1 Applied Standard........................................................................................................................................ 6 1.2 Test Location ............................................................................................................................................. 6 1.3 Test Environment Condition ....................................................................................................................... 6 2 Test Summary ........................................................................................................................................................ 7 3 Description of the Equipment under Test (EUT) ..................................................................................................... 8 3.1 General Description ................................................................................................................................... 8 3.2 EUT Identity ............................................................................................................................................... 8 3.3 Technical Description ................................................................................................................................. 9 4 General Test Conditions / Configurations ............................................................................................................. 10 4.1 EUT Configurations .................................................................................................................................. 10 4.2 Test Environments ................................................................................................................................... 11 4.3 Antenna requirements .............................................................................................................................. 11 4.4 Description of tests................................................................................................................................... 12 4.5 Test Setups .............................................................................................................................................. 15 4.6 Test Conditions ........................................................................................................................................ 18 5 Main Test Instruments .......................................................................................................................................... 20 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 20 1 General Information 1.1 Applied Standard Applied Rules: 47 CFR FCC Part 2, Subpart J 2014 47 CFR FCC Part 15, Subpart C 2014 Test Method: FCC PUBLIC NOTICE DA 00-705 Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems (Released March 30, 2000) ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. ANSI C63.10-2013, American National Standard for Testing Unlicensed Wireless Devices. 1.2 Test Location Test Location : Reliability Labora…

Text truncated - open the document above for the full version.

RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 1 of 126 Appendix A: 20dB Emission Bandwidth (EBW) RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 2 of 126 1 Result Table EUT Conf. EBW [MHz] Verdict TM1_DH5_Ch0 0.943 Pass TM1_DH5_Ch39 0.945 Pass TM1_DH5_Ch78 0.945 Pass TM2_2DH5_Ch0 1.284 Pass TM2_2DH5_Ch39 1.285 Pass TM2_2DH5_Ch78 1.283 Pass TM3_3DH5_Ch0 1.275 Pass TM3_3DH5_Ch39 1.273 Pass TM3_3DH5_Ch78 1.271 Pass RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 3 of 126 2 Test Plot 2.1 TM1_DH5_Ch0 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 4 of 126 2.2 TM1_DH5_Ch39 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 5 of 126 2.3 TM1_DH5_Ch78 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 6 of 126 2.4 TM2_2DH5_Ch0 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 7 of 126 2.5 TM2_2DH5_Ch39 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 8 of 126 2.6 TM2_2DH5_Ch78 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 9 of 126 2.7 TM3_3DH5_Ch0 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 10 of 126 2.8 TM3_3DH5_Ch39 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 11 of 126 2.9 TM3_3DH5_Ch78 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 12 of 126 Appendix B: Carrier Frequency Separation RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 13 of 126 1 Result Table EUT Conf. Carrier Frequency Separation [MHz] Verdict TM1_DH5_Hop 0.950 Pass TM2_2DH5_Hop 0.900 Pass TM3_3DH5_Hop 0.900 Pass RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 14 of 126 2 Test Plot 2.1 TM1_DH5_Hop RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 15 of 126 2.2 TM2_2DH5_Hop RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 16 of 126 2.3 TM3_3DH5_Hop RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 17 of 126 Appendix C: Number of Hopping Channel RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 18 of 126 1 Result Table EUT Conf. Number of Hopping Channel Verdict TM1_DH5_Hop 79 Pass TM2_2DH5_Hop 79 Pass TM3_3DH5_Hop 79 Pass RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 19 of 126 2 Test Plot 2.1 TM1_DH5_Hop RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 20 of 126 2.2 TM2_2DH5_Hop RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 21 of 126 2.3 TM3_3DH5_Hop RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 22 of 126 Appendix D: Time of Occupancy (Dwell Time) RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 23 of 126 1 Result Table The Dwell Time = Burst Width * Total Hops. The detailed calculations are showed as follows: - The duration for dwell time calculation: 0.4 [s] * hopping number = 0.4 [s] * 79 [ch] = 31.6 [s*ch]; - The burst width [ms/hop/ch], which is directly measured, refers to the duration on one channel hop. - The hops per second for all channels: The selected EUT Conf uses a slot type of 5-Tx&1-Rx and a hopping rate of 1600 [ch*hop/s] for all channels. So the final hopping rate for all channels is 1600 / 6 = 266.67 [ch*hop/s]; - The hops per second on one channel: 266.67 [ch*hop/s] / 79 [ch] =3.38 [hop/s]; - The total hops for all channels within the dwell time calculation duration: 3.38 [hop/s] * 31.6 [s*ch] = 106.67 [hop*ch]; - The dwell time for all channels hopping: 106.67 [hop*ch] * Burst Width [ms/hop/ch]. EUT Conf. Burst Width [ms/hop/ch] Total Hops [hop*ch] Dwell Time [s] Verdict TM1_DH5_Ch39 2.900 106.67 0.309 Pass TM2_2DH5_Ch39 2.900 106.67 0.309 Pass TM3_3DH5_Ch39 2.900 106.67 0.309 Pass RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 24 of 126 2 Test Plot NOTE: The test plots are only for Burst Width measurements. 2.1 TM1_DH5_Ch39 RF Test Report of T1-A22L Report No: SYBH(Z-RF)023092015-2003 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Page 25 of 126 2.2 TM2_2DH5_Ch39 RF Test Report of T1-A22L Report…

Text truncated - open the document above for the full version.

Photos of Test Setup For GSM&WCDMA&LTE 1．Radiated Spurious Emissions Radiated Spurious Emission (below 3GHz) Radiated Spurious Emission (3GHz to18GHz) Radiated Spurious Emission (18GHz to26.5GHz) For Wlan/BT 2．Radiated Spurious Emissions Radiated Spurious Emission (below 1GHz) Radiated Spurious Emission (1GHz to18GHz) Radiated Spurious Emission (above 18GHz) Conducted Emissions Conducted Emissions for AC Ports --------------------------------------------The END-------------------------------------------