QISU1250-9WCDMA/GPRS/GSM/EDGE Mobile Phone with BT

Wonderful Communication, Mobile life. HUAWEI U1250-9 Mobile Phone User Guide Copyright © 2010 Huawei Technologies Co., Ltd. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permission , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLI- CABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLO- GIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Safety Precautions Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed infor- mation, refer to the section “Warnings and Precautions”. Do not switch on your phone when it is prohibited to use mobile phones or when the phone may cause interference or danger. Switch off your phone near high-precision electronic devices. The phone may affect the performance of these devices. Do not use your phone while driving. Do not attempt to disassemble your phone or its accessories. Only qualified personnel are allowed to service or repair the phone. Follow any rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus. Do not place your phone or its accessories in containers with strong electromagnetic field. Switch off your phone in aircraft. The phone may cause interference to control signals of the aircraft. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high- temperature place or use it in a place with flammable gas such as a gas station. Observe any laws or regulations on the use of wireless device. Respect others’ privacy and legal rights when using your wireless device. Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance. Strictly follow the relevant instructions of this manual while using the USB cable. Otherwise your phone or PC may be damaged. Use only approved batteries and chargers to avoid the risk of explosions. 1.Introduction Packing List . . . . . . . . . . 1 Your Phone . . . . . . . . . . 2 Security . . . . . . . . . . . . 10 Text Input . . . . . . . . . . 11 2.Customized Settings Phone Settings . . . . . . 13 Display Settings . . . . . 13 Network Settings . . . . . 14 3.Call Function Managing Contacts . . . 15 Viewing the Call Records . . . . . . . . . . . . . . . . . . . 16 Making or Ending a Call . . . . . . . . . . . . . . . . . . . 16 Answering or Rejecting a Call . . . . . . . . . . . . . . . 17 4.Message Function Message . . . . . . . . . . . 18 Email . . . . . . . . . . . . . . 19 5.Connection Function Connectivity Settings . . 20 USB . . . . . . . . . . . . . . . 20 Bluetooth ® . . . . . . . . . . 22 6.Entertainment Function Music . . . . . . . . . . . . . . 26 Camera . . . . . . . . . . . . 26 Browser . . . . . . . . . . . . 27 7.Business Function Calendar Management 28 File Management . . . . 29 8.Warnings and Precautions Electronic Device . . . . 30 Medical Device . . . . . . 30 Potentially Explosive Atmospheres . . . . . . . . 30 Traffic Security . . . . . . 31 Operating Environment 32 Preventing Hearing Damage . . . . . . . . . . . 33 Safety of Children . . . . 33 Accessories . . . . . . . . 33 Battery and Charger . . 33 Clearing and Maintenance . . . . . . . . . . . . . . . . . . . 34 Emergency Call . . . . . 35 Certification Information (SAR) . . . . . . . . . . . . . 36 FCC Statement . . . . . . 36 Contents 1 1. Introduction Your Phone can operate in virtually all countries, automatically switching between UMTS 1700/2100 and GSM/GPRS/EDGE 850/900/1800/1900 networks. NOTE: The services supported by your phone should be also supported by the network from where you use the phone. For details, contact your service provider. Packing List Your phone package box contains the following: 1.One mobile phone 2.One travel charger 3.One Li-ion battery 4.One User Guide 5.One USB data cable Your Phone 2 Your Phone Appearance and Keys 1. Charger connector/ Cable connector 2. Headset Jack 3. Earpiece 4. Left function key…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. AddressHuawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP518129 Page 1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com SubjectLetter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QIS1250-9 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2010-3-26 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISU1250-9 Product Name: WCDMA/GPRS/GSM/EDGE Mobile Phone with Bluetooth Product Model: HUAWEI U1250-9/ U1250-9 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705.

U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page1,Total 6 External Photos of U1250-9 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page2,Total 6 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page3,Total 6 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page4,Total 6 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page5,Total 6 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page6,Total 6

U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page1, Total 1 Label Location U1250-9

U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page1, Total 1 ID Label U1250-9

U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page1,Total 5 Internal Photos of U1250-9 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page2,Total 5 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page3,Total 5 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page4,Total 5 U1250-9 WCDMA/GPRS/GSM/EDGE mobile phone with Bluetooth SECRET Page5,Total 5

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785278 SAR-Laboratory Fax: +86-755-36834474 . Page 1 of 42 Accredited testing laboratory CNAS Registration number: L0310 Appendix to test report no. SYBH(Z-SAR) 026032010 Calibration data, Phantom certificate and detail information of the DASY5 System Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 2 of 42 Table of Content 1 Calibration report “Probe ES3DV3” ..................................................................................................................................... 3 2 Calibration report “1900 MHz System validation dipole” .................................................................................................. 11 3 Calibration report “835 MHz System validation dipole” .................................................................................................... 18 4 Calibration report “1800 MHz System validation ............................................................................................................... 25 5 Calibration certificate of Data Acquisition Unit (DAE) ...................................................................................................... 32 6 Application Note System Performance Check .................................................................................................................... 37 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 3 of 42 1 Calibration report “Probe ES3DV3” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 4 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 5 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 6 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 7 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 8 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 9 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 10 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 11 of 42 2 Calibration report “1900 MHz System validation dipole” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 12 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 13 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 14 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 15 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 16 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 17 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 18 of 42 3 Calibration report “835 MHz System validation dipole” Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 19 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 20 of 42

Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 21 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 22 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 23 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 24 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 25 of 42 4 Calibration report “1800 MHz System validation Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 26 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 27 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 28 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 29 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 30 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 31 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 32 of 42 5 Calibration certificate of Data Acquisition Unit (DAE) Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 33 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 34 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 35 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 36 of 42 Huawei Technologies Co.,Ltd. Calibration Data and Phantom Information to test report no.: SYBH(Z-SAR)214012010 As of 2010-03-16 Page 37 of 42 6 Application Note System Performance Check 6.1.1.1 Purpose of system performance check The system performance check verifies that the system operates within its specifications. System and operator errors can be detected and corrected. It is recommended that the system performance check is performed prior to any usage of the system in order to guarantee reproducible results. The measurement of the Specific Absorption Rate (SAR) is a complicated task and the result depends on the proper functioning of many components and the correct settings of many parameters. Faulty results due to drift, failures or incorrect parameters might not be recognized, since they often look similar in distribution to the correct ones. The Dosimetric Assessment System DASY5 incorporates a system performance check procedure to test the proper functioning of the system. The system performance check uses normal SAR measurements in a simplified setup (the flat section of the SAM Twin Phantom) with a well characterized source (a matched dipole at a specified distance). This setup was selected to give a high sensitivity to all parameters that might fail or vary over time (e.g., probe, liquid parameters, and software settings) and a low sensitivity to external effects inherent in the system (e.g., positioning uncertainty of the device holder). The system performance check does not replace the calibration of the components. The accuracy of the system performance check is not sufficient for calibration purposes. It is possible to calculate the field quite accurately in this simple setup; however, due to the open field situation some factors (e.g., laboratory reflections) cannot be accounted for. Calibrations in the flat phantom are possible with transfer calibration methods, using either temperature probes or calibrated E-field probes. The system performance check also does not test the system performance for arbitrary field situations encountered during real measurements of mobile phones. These checks are performed at SPEAG by testing the components under various conditions (e.g., spherical isotropy measurements in liquid, linearity measurements, temperature variations, etc.), the results of which are used for an error estimation of the system. The system performance check will indicate situations where the system uncertainty is exceeded due to drift or failure. 6.1.1.2 System Performance check procedure Preparation The conductivity should be measured before the validation and the measured liquid parameters must be entered in the software. If the measured values differ from targeted values in the dipole document, the liquid composition should be adjusted. If the validation is performed with slightly different (measured) liquid parameters, the expected SAR will also be different. See the application note about SAR sensitivities for an estimate of possible SAR deviations. Note that the liquid parameters are temperature dependent with approximately – 0.5% decrease in permitivity and + 1% increase in conductivity for a temperature decrease of 1° C. The dipole must be placed beneath the flat phantom section of the Generic Twin Phantom with the correct distance holder in place. The distance holder should touch the phantom surface with a light pressure at the reference marking (little hole) and be oriented parallel to the long side of the phantom. Accurate positioning is not necessary, since the system will search for the peak SAR location, except that the…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Huawei Base, Bantian, Longgang District, Shenzhen, P.R.China Phone: +86-755-28785278 SAR-Laboratory Fax: +86-755-36834474 . Report On SAR Test of WCDMA/GPRS/GSM/EDGE Mobile Phone with Bluetooth M/N: HUAWEI U1250-9/U1250-9 Test report no. : SYBH(Z-SAR)026032010 Type identification : HUAWEI U1250-9/U1250-9 FCC-ID : QISU1250-9 Test specification : IEEE 1528-2003 : ANSI C95.1-1999 : RSS-102 issue 2 (2005) : OET Bulletin 65 Supplement C : IEC 62209-2:2008(106/162/CDV) Accredited testing laboratory CNAS Registration number: L0310 Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR)026032010 As of 2010-03-16 Page 2 of 111 Table of Contents 1 General Information............................................................................................................................................................... 3 1.1 Notes ............................................................................................................................................................................... 3 1.1.1 Statement of Compliance ....................................................................................................................................... 3 1.2 Testing laboratory............................................................................................................................................................ 4 1.3 Details of applicant.......................................................................................................................................................... 4 1.4 Application details........................................................................................................................................................... 4 1.5 Test item .......................................................................................................................................................................... 5 1.5.1 EUT Description .................................................................................................................................................... 6 1.6 Test specification(s) ........................................................................................................................................................ 6 1.6.1 RF exposure limits ................................................................................................................................................. 6 2 Technical test ......................................................................................................................................................................... 8 2.1 Summary of test results ................................................................................................................................................... 8 2.2 Test environment ............................................................................................................................................................. 8 2.3 Measurement and test set-up ........................................................................................................................................... 8 2.4 Measurement system ....................................................................................................................................................... 9 2.4.1 System Description ................................................................................................................................................ 9 2.4.2 Test environment ................................................................................................................................................. 10 2.4.3 Probe description ................................................................................................................................................. 10 2.4.4 Phantom description ............................................................................................................................................ 12 2.4.5 Device holder description .................................................................................................................................... 12 2.4.6 Scanning procedure.............................................................................................................................................. 13 2.4.7 Spatial Peak SAR Evaluation............................................................................................................................... 14 2.4.8 Data Storage and Evaluation................................................................................................................................ 15 2.4.9 Test equipment utilized........................................................................................................................................ 17 2.4.10 Tissue simulating liquids: dielectric properties.................................................................................................... 18 2.4.11 Tissue simulating liquids: parameters.................................................................................................................. 19 2.4.12 Measurement uncertainty evaluation for SAR test .............................................................................................. 20 2.4.13 Measurement uncertainty evaluation for system validation................................................................................. 21 2.4.14 System validation................................................................................................................................................. 22 2.4.15 Validation procedure............................................................................................................................................ 23 2.5 Test Results ............................................................................................................................…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR)026032010 As of 2010-03-16 Page 31 of 111 2.6.1 General description of test procedures The DUT is tested using a CMU 200 communications tester as controller unit to set test channels and maximum output power to the DUT, as well as for measuring the conducted peak power. Test positions as described in the tables above are in accordance with the specified test standard. Tests in body position are performed with the maximum number of timeslots in uplink. Tests in head position are performed in voice mode with 1 timeslot unless GPRS/EGPRS function allows parallel voice and data traffic on 2 or more timeslots (see chapter 1.5 for details). Conducted output power was measured using an integrated RF connector and attached RF cable. Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR)026032010 As of 2010-03-16 Page 32 of 111 Annex 1 System performance verification Date/Time: 2010-03-10 21:32:21 SystemPerformanceCheck-D835 head DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.925 mho/m; ε r = 41.4; ρ = 1000 kg/m3 Phantom section: Flat Section DASY5 Configuration: - Probe: ES3DV3 - SN3168; ConvF(6.06, 6.06, 6.06); Calibrated: 12/18/2009 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn851; Calibrated: 5/14/2009 - Phantom: SAM1; Type: SAM; Serial: TP-1475 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 d=15mm, Pin=250mW/Area Scan (6x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.46 mW/g d=15mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 52.5 V/m; Power Drift = 0.074 dB Peak SAR (extrapolated) = 3.44 W/kg SAR(1 g) = 2.35 mW/g; SAR(10 g) = 1.54 mW/g Maximum value of SAR (measured) = 2.55 mW/g Additional information: position or distance of DUT to SAM (if not standard head positions) : ambient temperature: 22.0°C; liquid temperature: 21.5°C Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR)026032010 As of 2010-03-16 Page 33 of 111 Date/Time: 2010-03-11 21:14:13 SystemPerformanceCheck-D835 body DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.967 mho/m; ε r = 54.2; ρ = 1000 kg/m3 Phantom section: Flat Section DASY5 Configuration: - Probe: ES3DV3 - SN3168; ConvF(5.97, 5.97, 5.97); Calibrated: 12/18/2009 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn851; Calibrated: 5/14/2009 - Phantom: SAM2; Type: SAM; Serial: TP-1474 - Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125 d=15mm, Pin=250mW/Area Scan (6x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.42 mW/g d=15mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54 V/m; Power Drift = 0.082 dB Peak SAR (extrapolated) = 3.79 W/kg SAR(1 g) = 2.6 mW/g; SAR(10 g) = 1.7 mW/g Maximum value of SAR (measured) = 2.81 mW/g Additional information: position or distance of DUT to SAM (if not standard head positions) : ambient temperature: 22.0°C; liquid temperature: 21.5°C Huawei Technologies Co.,Ltd. Test report no.: SYBH(Z-SAR)026032010 As of 2010-03-16 Page 34 of 111 Date/Time: 2010-03-12 21:21:40 SystemPerformanceCheck-D1900 head DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5d091 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.37 mho/m; ε r = 39.7; ρ = 1000 kg/m3 Phantom section: Flat Section DASY5 Configuration: - Probe: ES3DV3 - SN3168; ConvF(4.99, 4.99, 4.99); Calibrated: 12/18/2009 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn851; Calibrated: 5/14/2009 - Phantom: SAM2…

Text truncated - open the document above for the full version.