QISU8655-51HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with BT

Welcome to HUAWEI Quick Start Guide HUAWEI U8655-1 Personal Information and Data Security The use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming accessible to others. Several measures are recommended to help you protect personal and confidential information. • Place your device in a safe area to prevent it from unauthorized use. • Set your device screen to lock and create a password or unlock pattern to open it. • Periodically back up personal information kept on your SIM/UIM card, memory card, or stored in your device memory. If you change to a different device, be sure to move or delete any personal information on your old device. • If you are worried about viruses when you receive messages or emails from a stranger, you can delete them without opening them. • If you use your device to browse the Internet, avoid websites that might pose a security risk to avoid theft of your personal information. • If you use services such as Wi-Fi tether or Bluetooth, set passwords for these services to prevent unauthorized access. When these services are not in use, turn them off. • Install or upgrade device security software and regularly scan for viruses. • Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications should be scanned for viruses. • Install security software or patches released by Huawei or third- party application providers. • Some applications require and transmit location information. As a result, a third-party may be able to share your location information. • Your device may provide detection and diagnostic information to third-party application providers. Third party vendors use this information to improve their products and services. • If you have concerns about the security of your personal information and data, please contact [email protected]. What is in Your Box • Mobile phone •Charger • USB cable •Battery • Headset • microSD card (Optional) • Quick Start Guide Phone at a Glance All the pictures in this guide are for your reference only. Your phone’s actual display features may be different to those described here, depending on its software version. Installing the SIM Card There are two steps to install the SIM card: 1. Remove the battery cover. 2. Insert the SIM card. (Optional) Installing the microSD Card If you want to expand your phone memory, you can also insert a microSD card. Camera Headset jack Microphone Volume Keys micro USB charging port Loudspeaker 1 2 1. Remove the battery cover. 2. Insert the microSD card into the card slot as shown in the diagram. Installing the Battery 1. Angle the edge labeled a (with the contacts) into the bottom end of the battery compartment. 2. Push the edge labeled b into the compartment until the battery clicks firmly into place. Charging the Battery Before charging the battery, ensure that it has been properly installed on your phone. 1. Connect the USB cable that came with your mobile phone to the charger. 12 2. Connect the other end of the USB cable to your mobile phone. Then, to start charging, plug the charger into an electrical outlet. If you charge your mobile phone while it is powered on, the battery icon on the notification bar indicates the charging status. When the battery icon changes to , your mobile phone is fully charged. Status Indicator The color of the status indicator tells you the status of your mobile phone’s battery. Touchscreen Actions Using your finger on the touchscreen, you can operate your phone conveniently. Status Indicator Green: Fully charged (when connected to charger). Orange: Charging in progress (when connected to charger). Red: Battery low. Drag TouchTouch & holdDouble touch RotateFlick Powering On Your Mobile Phone Press . The first time you power on your phone, you will be asked to sign in to your account and set up your mobile phone. If personal identification number (PIN) protection is enabled on your mobile phone, you must enter your PIN before using the mobile phone. Power-On Setup When you turn on your phone for the first time, You can follow the onscreen instructions to complete the setup, or skip the setup and do it at another time. Turning On Fast Boot 1. Touch > Settings > Applications. 2. Select the Fast boot check box. Do not turn on Fast boot while on an airplane. Powering Off Your Mobile Phone 1. Press and hold to open the Phone options menu. 2. Touch Power off. If Fast boot is enabled, the phone will enter the deep sleep mode. If Fast boot is disabled, touch OK to shut down the phone. Locking the Screen • When your phone is on, press to lock the screen. When the screen is locked, you can still receive messages and calls. • If your phone is idle for a while, the screen will lock automatically. Unlocking the Screen 1. Press to wake up the screen. 2. Drag the lock icon from left to right to unlock the screen. Home Screen You can set up the Home screen according to your own preferences, for example by adding a shortcut or a widget to your Home screen, or changing the wallpaper. To return to the Home screen from any of its extensions, press . When a new notification icon appears on the notification bar, place your finger on the notification bar and flick down to open the notification panel. 10:23 Flick your finger left or right across the Home screen. Touch to view thumbnails of the Home screen and its extensions. Touch a thumbnail to open the screen. 10:23 Adding a New Home Screen Item 1. Touch and hold a blank area on the Home screen until the Add to home screen menu is displayed. 2. Select an item to add it to the Home screen. Moving a Home Screen Item 1. Touch and hold an item on the Home screen until the item expands in size and the mobile phone vibrates. 2. Without lifting your finger, drag the item to the desired position on the screen, and then release it. Removing a Home Screen Item 1. Touch and hold an item on the Home screen until the item expan…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISU8655-51 to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2012-03-23 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISU8185-5 Product Name: HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; Product Model: HUAWEI U8655-51,U8655-51 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 60 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public. CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely ,

HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page1,Total 6 External Photos of HUAWEI U8655-51, U8655-51 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page2,Total 6 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page3,Total 6 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page4,Total 6 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page5,Total 6 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page6,Total 6

HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRE T Page1, Total 3 ID Label of HUAWEI U8655-51, U8655-51 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRE T Page2, Total 3 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRE T Page3, Total 3

HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page1,Total 7 Internal Photos of HUAWEI U8655-51, U8655-51 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page2,Total 7 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page3,Total 7 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page4,Total 7 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page5,Total 7 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page6,Total 7 HUAWEI U8655-51, U8655-51 HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth; SECRET Page7,Total 7

FCC Test Report - EDR Product Name: HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth Model Number: HUAWEI U8655-51, U8655-51 Report No: SYBH(Z-RF)008032012-2004 FCC ID: QISU8655-51 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2004 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total33 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2004 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total33 REGULATION FCC CFR47 Part 2 :2010: Subpart J; FCC CFR47 Part 15 :2010: Subpart C; START OF TEST Mar.06, 2012 END OF TEST Mar.13, 2012 Final Judgement: Pass Approved By Senior Engineer Mar.17, 2012 Dai Linjun Date Name Signature Reviewed By Mar.17, 2012 Cousy Xu Date Name Signature Operator Mar.17, 2012 Huang Qiuliang Date Name Signature FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2004 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total33 Contents 1 Summary .....................................................................................................................................................5 2 Product Description ...................................................................................................................................6 2.1 PRODUCTION INFORMATION ....................................................................................................................6 2.2 MODIFICATION INFORMATION ..................................................................................................................6 3 Test Site Description ..................................................................................................................................7 3.1 TESTING PERIOD ....................................................................................................................................7 3.2 GENERAL SET UP DESCRIPTION ..............................................................................................................7 4 Product Description ...................................................................................................................................8 4.1 TECHNICAL CHARACTERISTICS ................................................................................................................8 4.2 EUT IDENTIFICATION LIST .....................................................................................................................10 5 Main Test Instruments .............................................................................................................................12 6 Transmitter Measurements .....................................................................................................................13 6.1 BANDWIDTH MEASUREMENT ..................................................................................................................13 6.2 CARRIER FREQUENCY SEPARATION MEASUREMENT ................................................................................15 6.3 NUMBER OF HOPPING CHANNEL .............................................................................................................17 6.4 TIME OF OCCUPANCY ............................................................................................................................19 6.5 PEAK OUTPUT POWER ..........................................................................................................................21 6.6 BAND EDGE SPURIOUS EMISSION ...........................................................................................................23 6.7 CONDUCTED RF SPURIOUS ...................................................................................................................25 6.8 RADIATED SPURIOUS EMISSION & SPURIOUS IN RESTRICTED BAND ..........................................................27 6.9 CONDUCTED EMISSION AT POWER PORT ...............................................................................................30 7 System Measurement Uncertainty ..........................................................................................................32 8 Appendices List ........................................................................................................................................33 FCC Test Report of HU…

Text truncated - open the document above for the full version.

FCC Test Report Product Name: HUAWEI Ascend Y 200;HSDPA/UMTS/GPRS/GSM/EDGE Mobile Phone with Bluetooth Model Number: HUAWEI U8655-51, U8655-51 Report No: SYBH(Z-RF)008032012-2003 FCC ID: QISU8655-51 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total32 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total32 REGULATION FCC CFR47 Part 2:2010: Subpart J ; FCC CFR47 Part 15:2010: Subpart C; START OF TEST Mar.06, 2012 END OF TEST Mar.13, 2012 Final Judgement: Pass Approved By Senior Engineer Mar.17, 2012 Dai Linjun Date Name Signature Reviewed By Mar.17, 2012 Cousy Xu Date Name Signature Operator Mar.17, 2012 Huang Qiuliang Date Name Signature FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total32 Contents 1 Summary .....................................................................................................................................................5 2 Product Description ...................................................................................................................................6 2.1 PRODUCTION INFORMATION ....................................................................................................................6 2.2 MODIFICATION INFORMATION ..................................................................................................................6 3 Test Site Description ..................................................................................................................................7 3.1 TESTING PERIOD ....................................................................................................................................7 3.2 GENERAL SET UP DESCRIPTION ..............................................................................................................7 4 Product Description ...................................................................................................................................8 4.1 TECHNICAL CHARACTERISTICS ................................................................................................................8 4.2 EUT IDENTIFICATION LIST .....................................................................................................................10 5 Main Test Instruments .............................................................................................................................12 6 Transmitter Measurements .....................................................................................................................13 6.1 BANDWIDTH MEASUREMENT ..................................................................................................................13 6.2 CARRIER FREQUENCY SEPARATION MEASUREMENT ................................................................................15 6.3 NUMBER OF HOPPING CHANNEL .............................................................................................................17 6.4 TIME OF OCCUPANCY ............................................................................................................................19 6.5 PEAK OUTPUT POWER ..........................................................................................................................21 6.6 BAND EDGE SPURIOUS EMISSION ...........................................................................................................23 6.7 CONDUCTED RF SPURIOUS ...................................................................................................................25 6.8 RADIATED SPURIOUS EMISSION & SPURIOUS IN RESTRICTED BAND ..........................................................27 6.9 CONDUCTED EMISSION AT POWER PORT ...............................................................................................29 7 System Measurement Uncertainty ..........................................................................................................31 8 Appendices List ........................................................................................................................................32 FCC Test Report of HUAWEI U8…

Text truncated - open the document above for the full version.

FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page1, Total4 Appendix J Photos of Test Setup FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total4 1 Radiated Spurious Emissions Radiated Spurious Emission (below 1GHz) FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total4 Radiated Spurious Emission (1GHz to18GHz) Radiated Spurious Emission (above 18GHz) FCC Test Report of HUAWEI U8655-51,U8655-51 FCC ID: QISU8655-51 Security Level: Public Report No: SYBH(Z-RF)008032012-2003 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total4 2 Conducted Emissions Conducted Emissions for AC Ports ----------------------------------------------------------The END---------------------------------------------------