QISU8850-5HSDPA/HSUPA/GSM/GPRS/EDGE Mobile Phone with Bluetooth

1 1 Read Before Proceeding 1.1 Safety Precautions Please read the safety precautions carefully to ensure the correct use of your phone. Do not crash, throw, or puncture your phone. Avoid falling, squeezing, and be nding of your phone. Do not use your phone in a moist environment, such as the bathroom. Prevent your phone from being soaked or washed in liquid. Do not switch on your phone when it is prohibited to use phones or when the phone may cause interference or danger. Do not use your phone while driving. Follow any rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus. Switch off your phone in aircraft. The phone may cause interference to control equipment of the aircraft. Switch off your phone near high-precision electronic devices. The phone may affect the performance of these devices. Do not attempt to disassemble your phone or its accessories. Only qualified personnel are allowed to service or repair the phone. Do not place your phone or its accessories in containers with a strong electromagnetic field. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a gas station. Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance. 2 1.2 Legal Notice Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd. and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks and product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd. reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. Huawei Technologies Co., Ltd. is not responsible for the legitimacy and quality of any products that you upload or download through this phone, including but not limited to the text, pictures, music, movies, and non-built-in software with copyright protection. Any consequences arising from the installation or usage of the preceding products on this phone shall be borne by yourself. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY Use only approved batteries and chargers to avoid the risk of explosions. Observe any laws or regulations on the use of wireless devices. Respect other’s privacy and legal rights when using your wireless device. Strictly follow the relevant instructions of this manual while using the USB cable. Otherwise, your phone or PC may be damaged. 3 AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. 4 2 Getting to Know Your Phone 2.1 Phone View 2.1.1 Phone at a Glance ■ Note: Sensors Touch screen Camera Flash LED Back cover Speaker Headset jack Earpiece Front camera Power Microphone Micro USB Volume All the pictures in this guide are for your reference only. The actual appearance and display features depend on the phone you purchase. ■ Note: When applying protective film on the phone, use the protective film with good transmittance. 2.1.2 Key Functions • Press to power on your phone. • Press and hold to open the Phone options menu. • Press to lock the screen when your phone is active. • Touch to open the menu on an active screen. • Touch to open Complete action using, then select Launcher or SPB Shell 3D as the screen displaying style. • Touch and hold to show the most recently used applications. 5 2.2 Installing Your Phone 2.2.1 Installing the SIM/USIM Card Follow the steps below to install the SIM/USIM card. 1. Remove the back cover. 2. Flip the compartment cover to open it. 3. Insert the SIM card. ■ Note: 2 OPEN 1 OPEN 3 Before installing the SIM /USIM card, power your phone off, to prevent the data stored in the SIM /USIM card from being lost. 2.2.2 Installing the microSD Card You need a microSD card to use the camera applications and store photos, music, videos and other data. 1. Remove the back cover. • Touch to return to the previous screen. • Touch to exit any application you are running. • Touch to hide the keyboard. • Touch to open Google search for searching your phone and the web. • Touch and hold to open Googl…

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd Date: November 29, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISU8850-5 ATTESTATION FCC ID: QISU8850-5 Product: HSPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth Model: HUAWEI U8850-5;U8850-5 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

RF_160, Issue 02 Huawei Technologies Co.,Ltd Declaration of Authorization We Name: Huawei Technologies Co.,Ltd Address: Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 City:  SHENZHEN . Country:China . Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd Rd., Nei-hu District City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s): Product description:  HSDPA/HSUPA/GSM/GPRS/EDGE Mobile Phone with Bluetooth  Type designation: HUAWEI U8850-5;U8850-5 on our behalf. Date:  2011/11/29.. City:  SHENZHEN .. Name:  Zhang Xinghai .. (2) Function: ......Manager............................... Signature:  Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Huawei Technologies Co.,Ltd Date: November 29, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: QISU8850-5 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description 4 BOM List 5 Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ______________________ Zhang Xinghai/manager Huawei Technologies Co.,Ltd

1. EUT Photograph (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (Adapter #1) (8) EUT Photo (Adapter #1with label 1) (9) EUT Photo (Adapter #1with label 2) (10) EUT Photo (Adapter #2) (11) EUT Photo (Adapter #2with label 1) (12) EUT Photo (Adapter #2with label 2) (13) EUT Photo (14) EUT Photo (Headset #1) (15) EUT Photo (Headset #2)

ABC 4 3 CHI MEI COMMUNICATION SYSTEM INCORPORATION DESIGNER ±0.1±0.15±0.2 10 SCALEUNIT mm ±0.15% ±0.15 ±0.2% ±0.2 ±0.25% ±0.25 100 50 ±0.3° APPROVED CHECKED 61°~90° ±0.5° AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION. A ±0.05 ±0.02±0.05 ±0.1 B ±0.1 C ±0.15 Unspecified Tolerance: ±mm 0 5 FINISH DRAWN D0°~30° ±0.1° 31°~60° ANGLE PART NO. FILE NAME: SHEETOF REV. A4H TITLE MODELDATE 4 THIS DRAWING CONTAINS INFORMATION IS PROPRIETARY TO MATERIAL 3 22 A 1 DCB DESCRIPTIONDATEDOCUMENT NO.SYM. 1 REVISEDAPPROVEDCHECKED FIH Size 50 100 5 10 Over To D 7.54 2* 5.42 29.29 8* R 0.5 17.5 6.47 16.39 5.87 5.57 16.09 R 0.9 R 0.3 2* R 1.8 0.1 (CPK) 12.41 15.02 39.23(CPK) 0.99 6.21 (CPK) 11.27 14.51 0.49 3.62 *2 A012011.06.21first drawing releaseJackBaoqingBenson NOTES: 1. MATERIAL: Copper-print paper with adhesive, 0.1T 2. COLOR : White 3. RESISTANCE MUST BE UNDER 1.0 FOR CONDUCTIVE GASKET AND ADHESIVE. 4."CPK"MARKS CPK DIMENSION, WHICH SHOULD BE ABOVE 1.33 TO ENSURE PROCESS STABILITY AND BE USED FOR INCOMING LOT INSPECTION . 5. PART TO MEET ROHS REGULATION 6. DELETE NO.2,3,4,5;ADD NO15~27 See Note SF8 U8850-5_SIM_Lable 2011/11/29 A02 Jack Lin 1 1 See Note Jack Lin Baoqing Mao Benson Sun 2:1 Adhesive area A022011.06.30modify for match SIM_LockJackBaoqingBenson 15 16 17 18 19 20 21 22 1 6 7 8 9 10 11 12 13 14 23 24 25 26 27 A02 A02 A02 A02 A02 A02 A02 A02 A02 A02 A02 A02 A02 A02 XHMA820C120000A2J0 FCC ID: QISU8850-5 MADE IN CHINA HUAWEI TECHNOLOGIES CO.,LTD.

(1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo (9) EUT Photo (10) EUT Photo

FCC Part15.247 Test Report Product Name : HSPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth Model No. : HUAWEI U8850-5/U8850-5 Marketing Name : HUAWEI U8850/ U8850/HUAWEI VISION/ Huawei Vision/ HUAWEI VISION U8850 FCC ID : QISU8850-5 Applicant : Huawei Technologies Co., Ltd. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Date of Receipt : 23/11/2011 Test Date : 23/11/2011~06/12/2011 Issued Date : 12/12/2011 Report No. : 11BS064R-RF-US-P06V01 Report Version : V 2.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 11BS064R-RF-US-P06V01 Page: 2 of 125 Test Report Certification Issued Date : 12/12/2011 Report No. : 11BS064R-RF-US-P06V01 Product Name : HSPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth Applicant : Huawei Technologies Co., Ltd. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Manufacturer : Huawei Technologies Co., Ltd. Address : Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 Model No. : HUAWEI U8850-5/U8850-5 Marketing Name : HUAWEI U8850/ U8850/HUAWEI VISION/ Huawei Vision/ HUAWEI VISION U8850 FCC ID : QISU8850-5 EUT Voltage : DC: 3.7V Trade Name : HUAWEI Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2008 ANSI C63.4: 2003 ANSI C63.10: 2009 Test Result : Complied Performed Location : Quietek Corporation (Linkou Laboratory) No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL:+866-2-8601-3788 / FAX:+886-2-8601-3789 FCC Registration Number: 92195 Documented By : (Engineering ADM: Alice Ni) Reviewed By : (Engineering Supervisor: Robin Wu) Approved By : (Engineering Manager: Marlin Chen) Report No.: 11BS064R-RF-US-P06V01 Page: 3 of 125 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No. 5-22, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. :BSMI, NCC, TAF Germany :TUV Rheinland Norway :Nemko, DNV USA :FCC, NVLAP Japan :VCCI Report No.: 11BS064R-RF-US-P06V01 Page: 4 of 125 TABLE OF CONTENTS Description Page 1. General Information .....................................................................................................7 1.1. EUT Description ...................................................................................................7 1.2. Mode of Operation.............................................................................................. 11 1.3. Tested System Details ........................................................................................12 1.4. Configuration of Tested Systerm ........................................................................13 1.5. EUT Exercise Software ......................................................................................14 2. Technical Test .............................................................................................................15 2.1. Summary of Test Result .....................................................................................15 2.2. Test Environment................................................................................................16 3. Conducted Emission..................................................................................................17 3.1. Test Equipment ..................................................................................................17 3.2. Test Setup ..........................................................................................................17 3.3. Limit....................................................................................................................18 3.4. Test Procedure ...................................................................................................18 3.5. Uncertainty .........................................................................................................18 3.6. Test Result .........................................................................................................19 4. Radiated Emission .....................................................................................................19 4.1. Test Equipment ..................................................................................................21 4.2. Test Setup ..........................................................................................................22 4.3. Limit...........…

Text truncated - open the document above for the full version.

SAR-Test Setup Photographs Test Setup Photographs Left-Cheek Touch Left-Tilt 15° Right-Cheek Touch Right-Tilt 15° Body SAR Back 10mm Body SAR Front 10mm Body SAR Back 10mm with Headset Body SAR Bottom 10mm for GSM Body SAR Right Side 10mm for GSM Body SAR Left Side 10mm for GSM Body SAR Left Side 10mm for WLAN Body SAR Top 10mm for WLAN Depth of the liquid in the phantom – Zoom in Note: The position used in the measurements were according to IEEE 1528 - 2003 Part 15.247- Test Setup Photograph Description: Conducted Emission Test Setup Description : Radiated Emission Test Setup for Below 1GHz Description : Radiated Emission Test Setup for Above 1GHz Part 22&24-Test Photograph Description: ERP Test Setup for Below 1G Description: EIRP Test Setup for Above 1G Part15B-Test Photograph Test Mode: Mode 1 Description: Side View of Conducted Emission Test Setup Test Mode: Mode 3 Description: Front View of Conducted Emission Test Setup Test Mode: Mode 3 Description: Side View of Conducted Emission Test Setup Test Mode: Mode 1,4 Description: Radiated Emission Test Setup (Below 1GHz) Test Mode: Mode 2 Description: Radiated Emission Test Setup (Below 1GHz) Test Mode: Mode 3 Description: Radiated Emission Test Setup (Below 1GHz) Test Mode: Mode 3 Description: Radiated Emission Test Setup (Above 1GHz) Test Mode: Mode 4 Description: Radiated Emission Test Setup (Above 1GHz)