QISU9200EHSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone

User Guide Welcome to HUAWEI 1 IntroductionThank you for choosing the HUAWEI Ascend P1XL (HUAWEI U9200E) smartphone. Be sure to carefully read the function descriptions, operating instructions, and safety precautions described in this document before using your phone.All pictures and illustrations in this document are for your reference only. The actual appearance and display features will depend on the specific phone purchased.Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline and email address in your country or region. Symbols and DefinitionsThe following symbols are used in this document to highlight sections that require special attention: Description Additional operation descriptions. Tip Help you to solve a problem quickly and efficiently. Caution Warnings and precautions. If the instructions in this document are not followed, the device may be damaged, or your data may be lost. 2 InstallationKeys and Functions Earpiece Headsetjack Charger jack/USB port SIM card slotSecondary camera Power key microSD card slot Microphone Status indicator Flash unit Main cameraVolume keysSpeaker Noise reduction microphone • Press and hold to power on your phone.• Press and hold to display the options menu, from where you can power off the phone and perform some shortcut operations. • Press to lock the screen when your phone is active. • Press and hold for over 10 seconds to forcibly power off the phone. • Touch to return to the previous screen or exit the currently running application. • Touch to hide the keyboard. Touch to open the menu on an active screen. 3 Installing a SIM CardInstall a SIM card as shown in the following diagram. When installing the SIM card, push the card into the slot until it clicks into place. • Touch to return to the Home screen.• Touch and hold to view the list of recently used applications. Standard USIM card dimension:25 mm x 15 mm x 0.76 mm (DxWxH) 4 Installing and Removing a microSD CardYour phone's memory capacity can be expanded by installing a microSD card. For installation instructions, refer to the following diagram. When installing the microSD card, push the card into the slot until it clicks into place.To remove the microSD card:1. On the Home screen, touch ! 6HWWLQJV . 2. Touch 6WRUDJH ! 8QPRXQW6'FDUG . 5 3. Remove the microSD card by gentling pushing it inwards then releasing; the card will automatically pop out from the slot. Charging the Battery Your mobile phone has an internal rechargeable battery. Do not attempt to open the battery cover and replace the battery by yourself. To replace the battery, contact Huawei or an authorized service provider. 1. Connect your charger to the USB cable provided.2. Connect the charger to a power outlet.3. Connect the phone to the USB cable. The battery will now start charging. While the battery is charging, the status indicator shows the battery level or charging status. 6 • Steady green: The phone is charging and the battery level is high or full. • Steady yellow: The phone is charging and the battery level is higher than 10%. • Steady red: The phone is charging and the battery level is low. • Blinking red: The battery level is low and the phone needs to be charged. If your phone is powered on, the charging icon is displayed in the notification bar while the battery is charging. When the icon changes to , the battery is fully charged. Important Information About the Battery• If the phone has not been used for a long time, or the battery is fully depleted, you may not be able to power on your phone immediately after you commence charging the battery. Allow the battery to charge for a few minutes with the phone powered off before attempting to use the phone. • Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. When the battery life becomes noticeably shorter after being fully charged, replace the battery with a new one of the same type. • Do not attempt to replace the phone battery yourself. To replace the battery, contact Huawei or an authorized service provider. • Using data services increases the phone's power consumption and will reduce battery life. • The time required to fully charge the battery depends on the ambient temperature and the age of the battery. 7 • If your phone is very low on power, it displays a message. If your phone is extremely low on power, it will power off automatically. Battery Saving TipsTry the following actions to reduce power consumption:• When you do not need 3G services, select the 8VHRQO\* QHWZRUNV check box in 0RELOHQHWZRUNV . • When you do not need to access the Internet or to upload or download data, flick the notification bar downwards to open the notification panel and touch to disable your data connection. • When you do not need to use the phone's wireless services such as GPS, Bluetooth, or Wi-Fi, open the notification panel, and touch , , or to disable these respective functions. • Touch 'LVSOD\ ! %ULJKWQHVV to lower the screen brightness, and touch 6OHHS to shorten the period until the screen locks. • Close applications that are no longer in use.• Lower the volume. 8 Getting StartedPowering Your Phone On or Off• When your phone is off, press and hold to power it on. If your SIM card is protected by a PIN, you must enter it to use the phone. • When your phone is on, press and hold to display the options menu. Touch Power off . If Fast boot is enabled, your phone enters deep sleep mode. If Fast boot is disabled, touch OK to power your phone off when prompted. Press and hold for over 10 seconds to forcibly power off the phone. Enabling Fast Boot1. On the Home screen, touch ! 6HWWLQJV . 2. Touch )DVWERRW to enable this function. Do not enable Fast boot while traveling on an airplane. Restarting Your Phone1. Press and hold to display the options menu. 2. Touch 5HVWDUW ! 2. to restart your phone. Configuring Your Ph one for the First Time A configuration wizard is displayed the f…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISU9200E to be kept confidential: 1. Schematic diagram. 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2012-08-24 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISU9200E Product Name: HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public. CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Document Title SECRET Page1,Total 3 External Photos of HUAWEI U9200E, U9200E Document Title SECRET Page2,Total 3 Document Title SECRET Page3,Total 3

Document Title SECRET Page1, Total 3 ID Label HUAWEI HUAWEI U9200E, U9200E Document Title SECRET Page2, Total 3 Document Title SECRET Page3, Total 3

Document Title SECRET Page1,Total 4 Internal Photos of HUAWEI U9200E, U9200E Document Title SECRET Page2,Total 4 Document Title SECRET Page3,Total 4 Document Title SECRET Page4,Total 4

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 1 of 205 TESTING No. L2264 OET 65 TEST REPORT Product Name HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/E DGE Mobile Phone with Bluetooth Model HUAWEI U9200E, U9200E FCC ID QISU9200E Client Huawei Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 2 of 205 GENERAL SUMMARY Product Name HSPA+/HSUPA/HSDPA/UMTS/GSM/GP RS/EDGE Mobile Phone with Bluetooth Model HUAWEI U9200E, U9200E Report No. RHA1207-0062SAR01 FCC ID QISU9200E Client Huawei Technologies Co., Ltd. Manufacturer Huawei Technologies Co., Ltd. Reference Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radiofrequency Electromagnetic Fields, 3 kHz to 300 GHz. IEEE Std 1528™-2003: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. SUPPLEMENT C Edition 01-01 to OET BULLETIN 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions. RSS-102 Issue 4 March 2010: Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) KDB 648474 D01 SAR Handsets Multi Xmiter and Ant, v01r05: SAR Evaluation Considerations for Handsets with Multiple Transmitters and Antennas. KDB 941225 D06 Hot Spot SAR v01 SAR Evaluation Procedures for Portable Devices with Wireless Router Capabilities KDB941225 D01 SAR test for 3G devices v02: SAR Measurement Procedures CDMA 20001x RTT, 1x Ev-Do, WCDMA, HSDPA/HSPA Conclusion This portable wireless equipment has been measured in all cases requested by the relevant standards. Test results in Chapter 7 of this test report are below limits specified in the relevant standards. General Judgment: Pass (Stamp) Date of issue: August 13 th , 2012 Comment The test result only responds to the measured sample. Approved by Director Revised by SAR Manager Performed by SAR Engineer TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 3 of 205 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the Test Report.......................................................................................................5 1.2. Testing Laboratory ................................................................................................................ 5 1.3. Applicant Information ............................................................................................................ 6 1.4. Manufacturer Information ...................................................................................................... 6 1.5. Information of EUT................................................................................................................ 7 1.6. The Maximum SAR 1g Values .............................................................................................. 10 1.7. Maximum Conducted Power of each tested Mode.............................................................. 12 1.8. Test Date ............................................................................................................................ 12 2. SAR Measurements System Configuration ................................................................................ 13 2.1. SAR Measurement Set-up .................................................................................................. 13 2.2. DASY5 E-field Probe System ............................................................................................. 14 2.2.1. ES3DV3 Probe Specification ....................................................................................... 14 2.2.2. E-field Probe Calibration .............................................................................................. 15 2.3. Other Test Equipment .........................................................................................................15 2.3.1. Device Holder for Transmitters .................................................................................... 15 2.3.2. Phantom...................................................................................................................... 16 2.4. Scanning Procedure........................................................................................................... 16 2.5. Data Storage and Evaluation .............................................................................................. 18 2.5.1. Data Storage................................................................................................................ 18 2.5.2. Data Evaluation by SEMCAD ...................................................................................... 18 3. Laboratory Environment............................................................................................................. 20 4. Tissue-equivalent Liquid ............................................................................................................ 21 4.1. Tissue-equivalent Liquid Ingredients................................................................................... 21 4.2. Tissue-equivalent Liquid Properties .................................................................................... 23 5. System Check ............................................................................................................................ 24 5.1. Description of System Check .............................................................................................. 24 5.2. System Check …

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 149 of 205 ANNEX D: Probe Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 150 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 151 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 152 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 153 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 154 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 155 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 156 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 157 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 158 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 159 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 160 of 205 ANNEX E: D835V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 161 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 162 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 163 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 164 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 165 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 166 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 167 of 205

TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 168 of 205 ANNEX F: D1750V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 169 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 170 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 171 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 172 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 173 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 174 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 175 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 176 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 177 of 205 ANNEX G: D1900V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 178 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 179 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 180 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 181 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 182 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 183 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 184 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 185 of 205 ANNEX H: D2450V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 186 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 187 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 188 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 189 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 190 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 191 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 192 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 193 of 205 ANNEX I: DAE4 Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 194 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 195 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 196 of 205 TA Technology (Shanghai) Co., Ltd. Test Report Report No.: RHA1207-0062SAR01 Page 197 of 205

FCC RF Test Report Product Name: HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth Model Number: HUAWEI U9200E, U9200E Report No: SYBH(Z-RF)023072012 -2001 FCC ID:QISU9200E Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2001 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total19 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2001 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total19 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Date of Receipt Test Item: Jul., 14, 2012 Start Date of Test: Jul., 16, 2012 End Date of Test: Jul., 22, 2012 Test Result: Pass Approved By Senior Engineer Aug., 23, 2012 Dai Linjun Date Name Signature Reviewed By Aug., 23, 2012 Cousy Xu Date Name Signature Operated By Aug., 23, 2012 Huang Qiuliang Date Name Signature FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2001 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total19 Contents 1 General Information .................................................................................................................................. 5 1.1 APPLIED STANDARD............................................................................................................................... 5 1.2 TEST LOCATION ..................................................................................................................................... 5 1.3 TEST ENVIRONMENTAL CONDITION ......................................................................................................... 5 2 Summary .................................................................................................................................................... 6 3 Product Description .................................................................................................................................. 7 3.1 PRODUCT INFORMATION ........................................................................................................................ 7 4 Test Description ........................................................................................................................................ 9 4.1 SUPPORTED FREQUENCY RANGE ........................................................................................................... 9 4.2 TRANSMITTER / RECEIVER CHARACTERISTICS ......................................................................................... 9 4.3 ANTENNA GAIN .................................................................................................................................... 10 4.4 POWER SUPPLY .................................................................................................................................. 10 5 General Test Conditions / Configurations ............................................................................................. 11 5.1 RF CHANNELS UNDER TEST ................................................................................................................. 11 5.2 TEST MODES ....................................................................................................................................... 11 5.3 TEST ENVIRONMENT ............................................................................................................................ 11 5.4 TEST SETUP ........................................................................................................................................ 12 5.5 TEST CONDITIONS ............................................................................................................................... 16 6 Main Test Instruments ............................................................................................................................ 18 7 Test Results ............................................................................................................................................. 19 8 Measurement Uncertainty ....................................................................................................................... 19 FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2001 Confidential Information of Huawei. No Distribution without Written Permission Page5, Total19 1 General Information 1.1 Appl…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth Model Number: HUAWEI U9200E, U9200E Report No: SYBH(Z-RF)023072012 -2002 FCC ID:QISU9200E Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2002 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total19 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2002 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total19 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Date of Receipt Test Item: Jul., 14, 2012 Start Date of Test: Jul., 16, 2012 End Date of Test: Jul., 22, 2012 Test Result: Pass Approved By Senior Engineer Aug., 23, 2012 Dai Linjun Date Name Signature Reviewed By Aug., 23, 2012 Cousy Xu Date Name Signature Operated By Aug., 23, 2012 Huang Qiuliang Date Name Signature FCC Test Report of HUAWEI U9200E, U9200E FCC ID: QISU9200E Report No: SYBH(Z-RF)023072012 -2002 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total19 Contents 1 General Information .................................................................................................................................. 5 1.1 APPLIED STANDARD............................................................................................................................... 5 1.2 TEST LOCATION ..................................................................................................................................... 5 1.3 TEST ENVIRONMENTAL CONDITION ......................................................................................................... 5 2 Summary .................................................................................................................................................... 6 3 Product Description .................................................................................................................................. 7 3.1 PRODUCT INFORMATION ........................................................................................................................ 7 4 Test Description ..................................................................................................................................…

Text truncated - open the document above for the full version.