QISU9202L-1LTE/HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone

User Guide Welcome to HUAWEI          ! "#   $$      ! %!    %!     &   &   ! "$$!   $$       $"   $!!  !$ ' $$! !  ! !  "($)  '''" ' ) "  *'$' * !!* $  $ ! $   $     "Symbols and Definitions $$'  &$      $     + ! $ , -  !    $!   ! " ! $! $)!&$ + $ $" .    !   "       $$'% )  & %  &$"  $$ /0    CameraMicrophone Power key Flash unitVolume keysNoise reduction microphone Secondary cameraHeadset jackEarpieceCharger jack/USB port Status indicator 1 ( $!' ! "1 ( $ !$ !   %  '   !' ! !    ! " 1 ($   '  !     )" 1    !)   2   $  !!$  " 1    &"  !     ) " 3 $$ 45.  # $$45  & '  $$'   " 1      "1   $) ' $  $  !!$  " Removing battery cover Installing USIM card Installing battery Installing battery cover 1 2 3 4 a b 6 $$ 7 )  4-.8 ! 9   !  &2!& $$  4- "0 $$    % $$'   " Removing battery cover Installing battery cover 1 Installing *micro SD card Installing battery *micro SD card is optional 3 2 4 a b :  )  4- ,";   %  < Settings " "   Storage < Unmount SD card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se only 2G networks   &2  Mobile networks " 1        !$  '$%$     &''!    !$   &$    " 1     ! 9' $)   @(4% #$  % 0 %!    !$%   % %  &$ !  )   " 1   Display < Brightness $'  &  %   Sleep   !   $  $ " 1 .$!!$   $  "1 ' )$ " A @ 4(' 8 ( ;;1   !  %! $ !' "  45  ! &(B%     ! " 1   !  %! $  !$ !   "   Power off " Fast boot  &$% !  !$! " Fast boot   &$%  OK  !' ! ' ! !" &$ 0#";   %  < Settings " "   Fast boot &$    "  -&$ Fast boot ' $)$  !$" 7 8 ( "( $  !$ !   ""   Restart < OK  ! " .   8 (  0      ' C  !$    !  !'"0$$'        ! "1.$  !$  "1.  C !  "  . @$   ) $& $ @$!!$  %) %  )       "($$$'$ $$' $    "     !    % ' $$&! !$  @$  %'     @  $  D   )E"    !    )   &$   @$  "  $ )@$  %    Sign in …

Text truncated - open the document above for the full version.

Huawei Technologies Co.,Ltd. Federal Communications Commission 2012-08-27 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISU9202L-1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2012-10-30: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 SECRET Page1,Total 5 External Photos of HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 SECRET Page2,Total 5 HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 SECRET Page3,Total 5 HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 SECRET Page4,Total 5 HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 SECRET Page5,Total 5

Document Title SECRET Page1, Total 1 ID Label HUAWEI HUAWEI U9202L, U9202L, HUAWEI U9202L-1,U9202L-1 Document Title SECRET Page2, Total 1 Document Title SECRET Page3, Total 1 Document Title SECRET Page4, Total 1

Document Title SECRET Page1,Total 7 Internal Photos of HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 Document Title SECRET Page2,Total 7 Document Title SECRET Page3,Total 7 Document Title SECRET Page4,Total 7 Document Title SECRET Page5,Total 7 Document Title SECRET Page6,Total 7 Document Title SECRET Page7,Total 7

Report No.:SYBH (Z-SAR) 032082012-2 FCC ID:QISU9202L-1 Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D835-EX-Head SystemPerformanceCheck-D835-EX- Body SystemPerformanceCheck-D1900- EX-Head SystemPerformanceCheck-D1900-EX- Body SystemPerformanceCheck-D2450-EX-Head SystemPerformanceCheck-D2450-EX-Body Date/Time: 8/11/2012 2:50:44 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D835-EX-Head DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d126 Communication System: CW; Frequency: 835 MHz Medium parameters used: f = 835 MHz; σ = 0.917 mho/m; ε r = 41.17; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.46, 9.46, 9.46); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/d=15mm,pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.62 mW/g Configuration/d=15mm,pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.589 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.734 mW/g SAR(1 g) = 2.5 mW/g; SAR(10 g) = 1.63 mW/g Maximum value of SAR (measured) = 2.70 mW/g 0 dB = 2.62 mW/g = 8.37 dB mW/g Date/Time: 8/11/2012 21:00:31 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D835-EX-Body DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d126 Communication System: CW; Frequency: 835 MHz Medium parameters used: f = 835 MHz; σ = 0.97 mho/m; ε r = 52.864; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.64, 9.64, 9.64); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 1; Type: SAM; Serial: TP-1475 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/d=15mm,pin=250mW/Area Scan (6x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.68 mW/g Configuration/d=15mm,pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.086 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 3.627 mW/g SAR(1 g) = 2.46 mW/g; SAR(10 g) = 1.6 mW/g Maximum value of SAR (measured) = 2.65 mW/g 0 dB = 2.68 mW/g = 8.58 dB mW/g Date/Time: 8/11/2012 8:13:44 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D1900-EX-Head DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.435 mho/m; ε r = 39.852; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(8.33, 8.33, 8.33); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/d=10mm, Pin=250mW/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 8.96 mW/g Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 62.180 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 18.189 mW/g SAR(1 g) = 9.43 mW/g; SAR(10 g) = 4.8 mW/g Maximum value of SAR (measured) = 10.6 mW/g 0 dB = 8.96 mW/g = 19.05 dB mW/g Date/Time: 8/10/2012 20:48:39 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D1900-EX-Body DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.577 mho/m; ε r = 51.54; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(7.89, 7.89, 7.89); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/d=10mm, Pin=250mW/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 11.1 mW/g Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.303 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 20.894 mW/g SAR(1 g) = 10.9 mW/g; SAR(10 g) = 5.5 mW/g Maximum value of SAR (measured) = 12.3 mW/g 0 dB = 11.1 mW/g = 20.90 dB mW/g Date/Time: 8/10/2012 11:08:31 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D2450-EX-Head DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; σ = 1.82 mho/m; ε r = 39.064; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(7.48, 7.48, 7.48); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/d=10mm, Pin=250mW/Area Scan (7x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 12.7 mW/g Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 41.591 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 29.616 mW/g SAR(1 g) = 13 mW/g; SAR(10 g) = 5.83 mW/g Maximum value of SAR (measured) = 14.8 mW/g 0 dB = 12.7 mW/g = 22.06 dB mW/g Date/Time: 8/13/2012 8:12:33 Test Laboratory: HUAWEI SAR Lab SystemPerformanceCheck-D2450-EX-Body DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:860 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; σ = 2.002 mho/m; ε r = 52.073; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Config…

Text truncated - open the document above for the full version.

Report No.:SYBH (Z-SAR) 032082012-2 FCC ID:QISU9202L-1 Appendix B. SAR Measurement Plots Table of contents GSM850 Head GSM850 Body GSM1900 Head GSM1900 Body WCDMA Band V Head WCDMA Band V Body WiFi 802.11b Head WiFi 802.11b Body Date/Time: 8/11/2012 3:29:55 Test Laboratory: HUAWEI SAR Lab U9202L-1 GSM850 190CH Left hand touch cheek DUT: U9202L-1; Type: Ascend P1; HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth; Serial: SAR1 Communication System: HW-GSM/GPRS/EDGE 1TS; Frequency: 836.6 MHz Medium parameters used: f = 837 MHz; σ = 0.928 mho/m; ε r = 41.212; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.46, 9.46, 9.46); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.6(6824) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.482 W/kg Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.430 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.607 mW/g SAR(1 g) = 0.477 mW/g; SAR(10 g) = 0.357 mW/g Maximum value of SAR (measured) = 0.506 W/kg 0 dB = 0.506 W/kg = -5.92 dB W/kg Date/Time: 8/11/2012 3:56:57 Test Laboratory: HUAWEI SAR Lab U9202L-1 GSM850 190CH Left hand tilt 15 degree DUT: U9202L-1; Type: Ascend P1; HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth; Serial: SAR1 Communication System: HW-GSM/GPRS/EDGE 1TS; Frequency: 836.6 MHz Medium parameters used: f = 837 MHz; σ = 0.928 mho/m; ε r = 41.212; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.46, 9.46, 9.46); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.308 mW/g Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.137 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 0.355 mW/g SAR(1 g) = 0.292 mW/g; SAR(10 g) = 0.225 mW/g Maximum value of SAR (measured) = 0.306 mW/g 0 dB = 0.308 mW/g = -10.22 dB mW/g Date/Time: 8/11/2012 8:56:27 Test Laboratory: HUAWEI SAR Lab U9202L-1 GSM850 190CH Right hand touch cheek DUT: U9202L-1; Type: Ascend P1; HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth; Serial: SAR1 Communication System: HW-GSM/GPRS/EDGE 1TS; Frequency: 836.6 MHz Medium parameters used: f = 837 MHz; σ = 0.928 mho/m; ε r = 41.212; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.46, 9.46, 9.46); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.463 mW/g Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.272 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 0.546 mW/g SAR(1 g) = 0.447 mW/g; SAR(10 g) = 0.341 mW/g Maximum value of SAR (measured) = 0.472 mW/g 0 dB = 0.463 mW/g = -6.69 dB mW/g Date/Time: 8/11/2012 9:41:06 Test Laboratory: HUAWEI SAR Lab U9202L-1 GSM850 190CH Right hand tilt 15 degree DUT: U9202L-1; Type: Ascend P1; HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth; Serial: SAR1 Communication System: HW-GSM/GPRS/EDGE 1TS; Frequency: 836.6 MHz Medium parameters used: f = 837 MHz; σ = 0.928 mho/m; ε r = 41.212; ρ = 1000 kg/m 3 Phantom section: Right Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.46, 9.46, 9.46); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM 2; Type: SAM; Serial: TP-1474 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.284 mW/g Configuration/Head/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.767 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.334 mW/g SAR(1 g) = 0.273 mW/g; SAR(10 g) = 0.213 mW/g Maximum value of SAR (measured) = 0.286 mW/g 0 dB = 0.284 mW/g = -10.94 dB mW/g Date/Time: 8/11/2012 21:29:02 Test Laboratory: HUAWEI SAR Lab U9202L-1 GSM850 GPRS 1ST 190CH Towards Phantom 10mm DUT: U9202L-1; Type: Ascend P1; HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth; Serial: SAR1 Communication System: HW-GSM/GPRS/EDGE 1TS; Frequency: 836.6 MHz Medium parameters used: f = 837 MHz; σ = 0.978 mho/m; ε r = 52.934; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: EX3DV4 - SN3661; ConvF(9.64, 9.64, 9.64); Calibrated: 1/27/2012; lSensor-Surface: 4mm (Mechanical Surface Detection), z = 1.0, 31.0 lElectronics: DAE4 Sn679; Calibrated: 12/23/2011 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.1(838); SEMCAD X 14.6.5(6469) Configuration/Body/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.620 mW/g Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 24.758 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.747 mW/g SAR(1 g) = 0.590 mW/g; SAR(10 g) = 0.457 mW/g Maximum value of SAR (measured) = 0.700 mW/g 0 dB = 0.620 mW/g = -4.16 dB mW/g Date/Time: 8/11/2012 21:56:23 Test Laboratory: HUAWEI SAR Lab U9202L-1 GSM850 GPRS 2ST 190CH Towards Phantom 10mm DUT: U9202L-1; Type: Ascend P1; HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with…

Text truncated - open the document above for the full version.

Justification of the extended calibration of Dipole D2450V2 SN: 860 Per KDB 450824, we have Measured the Impedance and Return Loss as below, and the return loss is <-20dB, with 20% of prior calibration; the real or imaginary parts of the impedance is with 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Calibration Date 2011-03-08 Measured Date 2012-03-07 Dipole2450 Head TST Target Value Measured Value Difference Impedance transformed to feed point 54.0Ω+2.2jΩ 54.1Ω+2.36jΩ R=0.1Ω, X=0.16Ω Return Loss -27.2dB -27.34dB -0.51% Dipole2450 Body TST Target Value Measured Value Difference Impedance transformed to feed point 49.0Ω+4.9jΩ 49.48Ω+5.13jΩ R=0.48Ω, X=0.23Ω Return Loss - 26.0dB -26.38dB -1.46% Measured Date 2011-03-08 2012-03-07 ------- Impedance Test-Head Return Loss Test-Head Impedance Test-Body Return Loss Test-Body

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Project Name: _______________________ Model :_______________________ FCC ID : _______________________ Report No. : _______________________ APPROVED CHECKED PREPARED BY DATE 2012-08-28 2012-08-28 2012-08-28 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 QISU9202L-1 SYBH(Z-SAR)032082012-2 LTE/HSPA+/HSUPA/HSDPA/UMTS/GSM/ GPRS/EDGE Mobile Phone with Bluetooth Report No.:SYBH(Z-SAR)032082012-2 FCC ID:QISU9202L-1 2012-08-28 Page 2 of 36 Table of Contents 1 General Information ............................................................................................................................................................ 4 1.1 Statement of Compliance .......................................................................................................................................... 4 1.2 RF exposure limits...................................................................................................................................................... 4 1.3 EUT Description ......................................................................................................................................................... 5 1.3.1 General Description ........................................................................................................................................... 6 1.4 Test specification(s) .................................................................................................................................................. 6 1.5 Testing laboratory ....................................................................................................................................................... 6 1.6 Applicant and Manufacturer ...................................................................................................................................... 6 1.7 Application details ...................................................................................................................................................... 6 1.8 Ambient Condition ..................................................................................................................................................... 6 2 SAR Measurement System ............................................................................................................................................. 7 2.1 SAR Measurement Set-up ....................................................................................................................................... 7 2.2 Test environment ........................................................................................................................................................ 7 2.3 Data Acquisition Electronics description ................................................................................................................ 8 2.4 Probe description ....................................................................................................................................................... 9 2.5 Phantom description ................................................................................................................................................ 10 2.6 Device holder description ........................................................................................................................................ 10 2.7 Test Equipment List ................................................................................................................................................. 11 3 SAR Measurement Procedure ...................................................................................................................................... 12 3.1 Scanning procedure ................................................................................................................................................. 12 3.2 Spatial Peak SAR Evaluation ................................................................................................................................. 13 3.3 Data Storage and Evaluation .................................................................................................................................. 14 4 System Verification Procedure ........................................................................................................................................ 16 4.1 Tissue Verification .................................................................................................................................................... 16 4.2 System Check ........................................................................................................................................................... 18 4.3 Validation Procedure................................................................................................................................................ 19 5 Measurement Uncertainty Evaluation .......................................................................................................................... 20 5.1 Measurement uncertainty evaluation for SAR test .............................................................................................. 20 5.2 Measurement uncertainty evaluation for system valida…

Text truncated - open the document above for the full version.

FCC RF Test Report Product Name: LTE/HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE Mobile Phone with Bluetooth Model Number: HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 Report No: SYBH(Z-RF)015072012-2001 FCC ID:QISU9202L-1 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 FCC ID: QISU9202L-1 Report No: SYBH(Z-RF)015072012-2001 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total20 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 3. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-2. 4. The test report is invalid if not marked with "exclusive stamp for the test report". 5. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 6. The test report is invalid if there is any evidence of erasure and/or falsification. 7. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 8. Normally, the test report is only responsible for the samples that have undergone the test. 9. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of HUAWEI U9202L, U9202L, HUAWEI U9202L-1, U9202L-1 FCC ID: QISU9202L-1 Report No: SYBH(Z-RF)015072012-2001 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total20 Applicant: Huawei Technologies Co., Ltd. Address: Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Date of Receipt Test Item: July., 16, 2012 Start Date of Test: July., 18, 201…

Text truncated - open the document above for the full version.