QISY336-A1Smart Phone

Quick Start Guide Welcome to HUAWEI Model:Y336-A1 TracFone part number: HXXXXXXX 1 Phone at a Glance All the pictures in this guide are for your reference only. Your phone's actual display features may be different to those described here, depending on its software version. Key Functions at Your Fingertips • Press and hold to power on your mobile phone. • When your mobile phone is powered on, press and hold this button to display the options menu. You can then choose to power off the phone or perform shortcut operations. • Press to lock the screen when your mobile phone is active. • Touch to open the menu on an active screen. • Touch and hold to display recently used applications. Touch to return to the Home screen. Earpiece Volume key Headset jack Charger/ Data port Power key Back Home Menu Speaker Light sensor Status light 2 Installing the SIM Card There are two steps to install the SIM card: 1. Remove the battery cover. 2. Insert the SIM card. To remove the SIM card, foolow the steps below. • Touch to return to the previous screen or exit the application you are running. •Touch to hide the keyboard. 12 12 3 Installing the microSD™ Card If you want to expand your phone memory, you can also insert a microSD card. 1. Remove the battery cover. 2. Insert the microSD card into the card slot as shown in the diagram. Installing the Battery 1. Angle the edge labeled a (with the contacts) into the bottom end of the battery compartment. 2. Push the edge labeled b into the compartment until the battery clicks firmly into place. 12 a b 4 Charging the Battery Before charging the battery, ensure that it has been properly installed on your phone. 1. Connect the USB cable that came with your mobile phone to the charger. 2. Connect the other end of the USB cable to your mobile phone. Then, to start charging, plug the charger into an electrical outlet. Status Indicator The color of the status indicator tells you the status of your mobile phone's battery. Status Indicator Green: Fully charged (when connected to charger). Orange: Charging in progress (when connected to charger). Red: Battery low. 5 Touchscreen Actions Using your finger on the touchscreen, you can operate your phone conveniently. Home Screen You can set up the Home screen according to your own preferences, for example by adding a shortcut or a widget to your Home screen, changing the wallpaper, or setting the number of Home screen extensions. To return to the Home screen from any of its extensions, press . When a new notification icon appears on the notification bar, place your finger on the notification bar and flick down to open the notification panel. Touch & holdTouch FlickDrag Zoom Flick your finger left or right across the Home screen. 6 Adding a New Home Screen Item 1. On the Home screen, touch to display the application list. 2. Press and hold an application icon, and then drag the icon to a blank area on the Home screen. Removing an Icon from the Home Screen 1. Touch and hold an item on the Home screen that you want to remove until your mobile phone vibrates. 2. Without lifting your finger, drag the item to the trash can. Wait until the item and the trash can turn red. 3. Release the item. Adding a Contact 1. In the contact list, touch . 2. From the screen displayed, create a contact in your mobile phone, SIM card or your account . Add a new account if you do not have one. 3. Enter the contact's name, and then add detailed information such as phone numbers and address. 4. Touch DONE to save the contact information. To save a contact from your call log, touch and hold the desired phone number to display the options menu, and then touch Add to contacts. Making a Call with the Phone Application 1. On the Home screen, touch . 2. Enter the phone number. 3. Touch to initiate the call. 7 Creating and Sending a Multimedia Message You can use multimedia messages to make everyday communications very special. You can record a message and send it as an audio file, for example, sing "Happy Birthday" and send it to a friend, or send a slideshow of photographs of a special event. The possibilities are enormous. 1. Enter a phone number in the To field, or touch to select a contact from People. 2. Touch the composition text box to start composing your message. 3. When you are ready to send the message, touch . Connecting Internet Get online using your phone's Wi-Fi to save your money. Turning On Wi-Fi 1. Touch Settings. 2. Under WIRELESS & NETWORKS, touch the button next to Wi-Fi. Basic Operations Touch Browser to open the home page. When known or open Wi-Fi networks and mobile data networks are available at the same time, your phone will preferably select a Wi-Fi network for Internet access. Touch on the upper section of the screen, and all web pages currently open are displayed. You can: • Touch one page to enlarge it. • Touch the cross sign (×) to close that page. • Touch (+) to open a new browser window. 8 Opening a Webpage 1. In a browser window, touch the URL field at the top of the screen. 2. Use the keyboard to enter a webpage address. 3. As you enter the address, matching webpage addresses will appear on the screen. If you see the address you want, touch it and go directly to that webpage or complete entering your desired webpage. Turning Off Your Data Service When you are not using your data service, to eliminate unwanted data traffic, you can turn it off quickly. 1. Open the notification bar. 2. Touch at the top of the screen to switch data services on or off. Play Store Android Play Store provides direct access to applications and games which you can download and install on your phone. Opening Play Store 1. On the Home screen, touch Play Store. 2. When you open Play Store for the first time, the Google Play Terms of Service window will appear. Touch Accept to continue. Installing an Application 1. In the Play Store, select a category, and then touch the application you want to download. 2. To install the application, touch Download (if…

Text truncated - open the document above for the full version.

Date: Apr 30, 2014 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Re: HAC Attestation - FCC ID: QISY336-A1 To whom it may concern: HUAWEI TECHNOLOGIES CO., LTD. hereby declares that the reported MIF values are based on worst case operating modes for all air interfaces for which the HAC rating is provided, based on the current methodology for determining MIF values. SPEAG test files: UID Communication System Name MIF(dB) 10021-DAA GSM-FDD (TDMA, GMSK) 3.63 10011-CAA UMTS-FDD (WCDMA) -27.23 Sincerely, ____________________ Zhang Xinghai HUAWEI TECHNOLOGIES CO., LTD. Tel：0086-0755- 28970299 E-mail：[email protected]

Huawei Technologies Co.,Ltd Bantian, Longgang District, Shenzhen, 518129 Guangdong, P.R.China Date: May 8, 2014 Statement We, Huawei Technologies Co.,Ltd, states that our device, FCC ID: QISY336-A1, has a battery, But the battery will not be placed in the battery compartment when delivery, it is visible to the users as they purchase the products and install the battery. For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Te l : 0086-0755-28970299 Fax: 0086-0755-89650226

Huawei Technologies Co.,Ltd. Federal Communications Commission 2014-04-30 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: QISY336-A1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Operational Description Bom List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ***************************************************************************** In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the Commission withholds the following documents from public viewing until 2013-09-30: External Photos Internal Photos Test Setup Photos User Manual ****************************************************************************** It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Zhang Xinghai EMC Laboratory Manager Huawei Technologies Co., Ltd. E-mail: [email protected] Fax: 0086-0755-89650226

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base, Bantian, Longgang, Shenzhen, P.R China Post ZIP：518129 Page ：1/1 To: TUVPS Fax : NULL From:Zhang Xinghai Fax:0086-0755-89650226 Tel:0086-755-28970299 Email address: [email protected] Http: www.huawei.com Subject：Letter of Authorization 2014-04-30 To whom it may concern: We the undersigned, hereby authorize TUVPS to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by TUVPS on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Huawei Technologies Co., Ltd. . Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China +86 755 28780808 www.huawei.com Declaration of Letter Product Type: Smart Phone Model No.: H U AW EI Y336-A1, Y336-A1 FCC ID: QISY336-A1 Both two models were identical, only difference is the model name. And two models have the same technical construction, including software design, RF module, antennas, circuit design and PCB layout. There are no differences between the two models (H U AW E I Y336-A1, Y336-A1) on electrical and mechanical construction. For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager Address: Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C E-mail: [email protected] Te l : 0086-0755-28970299 Fax: 0086-0755-89650226

HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page1,Total 5 External Photos of HUAWEI Y336-A1, Y336-A1 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page2,Total 5 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page3,Total 5 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page4,Total 5 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page5,Total 5

HUAW EI Y336-A1, Y336-A1 Smart Phone; SECRET Page1, Total 4 Label Location HUAWEI Y336-A1, Y336-A1 HUAW EI Y336-A1, Y336-A1 Smart Phone; SECRET Page2, Total 4 HUAW EI Y336-A1, Y336-A1 Smart Phone; SECRET Page3, Total 4 HUAW EI Y336-A1, Y336-A1 Smart Phone; SECRET Page4, Total 4

HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page1,Total 8 Internal Photos of HUAWEI Y336-A1, Y336-A1 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page2,Total 8 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page3,Total 8 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page4,Total 8 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page5,Total 8 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page6,Total 8 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page7,Total 8 HUAWEI Y336-A1, Y336-A1 Smart Phone; SECRET Page8,Total 8

Administration Building, Headquarters of Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, 518129, P.R.C Tel: +86 755 28780808 Fax: +86 755 89652518 FCC SAR Compliance Test Report Product Name: Smart Phone Model: HUAWEI Y336-A1, Y336-A1 Report No.: SYBH(Z-SAR)052032014-2 FCC ID: QISY336-A1 APPROVED (Lab Manager) PREPARED (Test Engineer) BY DATE 2014-05-05 2014-05-05 The test results of this test report relate exclusively to the item(s) tested , The HUAWEI does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of HUAWEI. Reliability Laboratory of Huawei Technologies Co., Ltd. Report No.:SYBH(Z-SAR)052032014-2 FCC ID:QISY336-A1 2014-05-05 Page 2 of 61 Table of Contents 1 General Information ............................................................................................................................................... 4 1.1 Statement of Compliance .............................................................................................................................. 4 1.2 RF exposure limits ......................................................................................................................................... 5 1.3 EUT Description ............................................................................................................................................ 6 1.3.1 General Description ............................................................................................................................... 7 1.3.2 Hotspot power reduction specification for SAR ..................................................................................... 7 1.4 Test specification(s) ....................................................................................................................................... 8 1.5 Testing laboratory .......................................................................................................................................... 8 1.6 Applicant and Manufacturer .......................................................................................................................... 8 1.7 Application details .......................................................................................................................................... 8 1.8 Ambient Condition ........................................................................................................................................ 8 2 SAR Measurement System ................................................................................................................................... 9 2.1 SAR Measurement Set-up ............................................................................................................................ 9 2.2 Test environment ......................................................................................................................................... 10 2.3 Data Acquisition Electronics description .................................................................................................... 10 2.4 Probe description ......................................................................................................................................... 11 2.5 Phantom description .................................................................................................................................... 12 2.6 Device holder description ............................................................................................................................ 13 2.7 Test Equipment List ..................................................................................................................................... 14 3 SAR Measurement Procedure ............................................................................................................................ 15 3.1 Scanning procedure .................................................................................................................................... 15 3.2 Spatial Peak SAR Evaluation ...................................................................................................................... 16 3.3 Data Storage and Evaluation ...................................................................................................................... 17 4 System Verification Procedure ............................................................................................................................ 19 4.1 Tissue Verification ....................................................................................................................................... 19 4.2 System Check ............................................................................................................................................. 22 4.3 System check Procedure............................................................................................................................. 23 5 SAR measurement variability and uncertainty .................................................................................................... 24 5.1 SAR measurement variability ...................................................................................................................... 24 5.2 SAR measurement uncertainty ................................................................................................................... 24 6 SAR Test Configuration ....................................................................................................................................... 25 6.1 GSM Test Configuration ...........................................................................…

Text truncated - open the document above for the full version.

Report No.:SYBH(Z-SAR)052032014-2 FCC ID:QISY336-A1 Appendix A. System Check Plots Table of contents SystemPerformanceCheck-D835-ES-Head SystemPerformanceCheck-D835-ES-Body SystemPerformanceCheck-D1800-ES-Head SystemPerformanceCheck-D1800-ES-Body SystemPerformanceCheck-D1900-ES-Head SystemPerformanceCheck-D1900-ES-Body SystemPerformanceCheck-D2450-ES-Head SystemPerformanceCheck-D2450-ES-Body Date: 2014-4- 10 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-ES-Head DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.929 S/m; ε r = 42.902; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(6.26, 6.26, 6.26); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/d=15mm, Pin=250mW/Area Scan (6x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.76 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 48.179 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 3.59 W/kg SAR(1 g) = 2.38 W/kg; SAR(10 g) = 1.54 W/kg Maximum value of SAR (measured) = 2.81 W/kg 0 dB = 2.81 W/kg = 4.48 dBW/kg Date: 2014-4- 10 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D835-ES-Body DUT: Dipole 835 MHz D835V2; Type: D835V2; Serial: D835V2 - SN:4d059 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.986 S/m; ε r = 55.197; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(6.06, 6.06, 6.06); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/d=15mm, Pin=250mW/Area Scan (6x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.59 W/kg Configuration/d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.134 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 3.66 W/kg SAR(1 g) = 2.51 W/kg; SAR(10 g) = 1.65 W/kg Maximum value of SAR (measured) = 2.93 W/kg 0 dB = 2.93 W/kg = 4.66 dBW/kg Date: 2014-4- 16 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1800-ES-Head DUT: Dipole 1800 MHz D1800V2; Type: D1800V2; Serial: D1800V2 - SN:2d157 Communication System: UID 0, CW; Frequency: 1800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1800 MHz; σ = 1.41 S/m; ε r = 39.045; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(5.3, 5.3, 5.3); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 11.6 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 80.806 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 17.1 W/kg SAR(1 g) = 9.4 W/kg; SAR(10 g) = 4.96 W/kg Maximum value of SAR (measured) = 11.7 W/kg 0 dB = 11.7 W/kg = 10.69 dBW/kg Date: 2014-4- 13 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1800-ES-Body DUT: Dipole 1800 MHz D1800V2; Type: D1800V2; Serial: D1800V2 - SN:2d157 Communication System: UID 0, CW; Frequency: 1800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1800 MHz; σ = 1.571 S/m; ε r = 53.874; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.94, 4.94, 4.94); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/d=10mm, Pin=250mW/Area Scan (6x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 10.5 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 86.213 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 17.9 W/kg SAR(1 g) = 10.1 W/kg; SAR(10 g) = 5.25 W/kg Maximum value of SAR (measured) = 12.7 W/kg 0 dB = 12.7 W/kg = 11.05 dBW/kg Date: 2014-4- 12 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-ES-Head DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.388 S/m; ε r = 40.326; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(5.15, 5.15, 5.15); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/d=10mm, Pin=250mW/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 11.9 W/kg Configuration/d=10mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 80.416 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 17.5 W/kg SAR(1 g) = 9.65 W/kg; SAR(10 g) = 5.03 W/kg Maximum value of SAR (measured) = 12.0 W/kg 0 dB = 12.0 W/kg = 10.80 dBW/kg Date: 2014-4- 11 Test Laboratory: HUAWEI SAR/HAC Lab SystemPerformanceCheck-D1900-ES-Body DUT: Dipole 1900 MHz D1900V2; Type: D1900V2; Serial: D1900V2 - SN:5d143 Communication System: UID 0, CW (0); Frequency: …

Text truncated - open the document above for the full version.

Report No.:SYBH(Z-SAR)052032014-2 FCC ID:QISY336-A1 Appendix B. SAR Measurement Plots Table of contents GSM850 Head GSM850 Body GSM1900 Head GSM1900 Body UMTS Band V Head UMTS Band V Body UMTS Band IV Head UMTS Band IV Body UMTS Band II Head UMTS Band II Body WiFi 2450 MHz Head WiFi 2450 MHz Body Date: 2014-4-10 Test Laboratory: HUAWEI SAR/HAC Lab Y336-A1 GMS850 190CH Left hand touch cheek with battery 2# DUT: HUAWEI Y336-A1, Y336-A1; Type: Smart Phone ; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.93 S/m; ε r = 42.879; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(6.26, 6.26, 6.26); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.572 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.105 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.662 W/kg SAR(1 g) = 0.523 W/kg; SAR(10 g) = 0.394 W/kg Maximum value of SAR (measured) = 0.573 W/kg 0 dB = 0.573 W/kg = -2.42 dBW/kg Date: 2014-4-11 Test Laboratory: HUAWEI SAR/HAC Lab Y336-A1 GSM850 190CH Back side 15mm with battery 2# DUT: HUAWEI Y336-A1, Y336-A1; Type: Smart Phone ; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.987 S/m; ε r = 55.114; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(6.06, 6.06, 6.06); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.429 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.467 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.510 W/kg SAR(1 g) = 0.401 W/kg; SAR(10 g) = 0.301 W/kg Maximum value of SAR (measured) = 0.444 W/kg 0 dB = 0.444 W/kg = -3.53 dBW/kg Date: 2014-4-11 Test Laboratory: HUAWEI SAR/HAC Lab Y336-A1 GSM850 GPRS 2TS 190CH Back side 10mm DUT: HUAWEI Y336-A1, Y336-A1; Type: Smart Phone ; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-2TS (0); Frequency: 836.6 MHz;Duty Cycle: 1:4.10015 Medium parameters used: f = 837 MHz; σ = 0.987 S/m; ε r = 55.114; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(6.06, 6.06, 6.06); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.532 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.624 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 0.612 W/kg SAR(1 g) = 0.491 W/kg; SAR(10 g) = 0.371 W/kg Maximum value of SAR (measured) = 0.534 W/kg 0 dB = 0.534 W/kg = -2.72 dBW/kg Date: 2014-4-12 Test Laboratory: HUAWEI SAR/HAC Lab Y336-A1 GMS1900 661CH Left hand touch cheek with battery 2# DUT: HUAWEI Y336-A1, Y336-A1; Type: Smart Phone ; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 1880 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 1880 MHz; σ = 1.361 S/m; ε r = 40.353; ρ = 1000 kg/m 3 Phantom section: Left Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(5.15, 5.15, 5.15); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM2; Type: SAM; Serial: TP:1474 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/Head/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.558 W/kg Configuration/Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.976 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.733 W/kg SAR(1 g) = 0.491 W/kg; SAR(10 g) = 0.304 W/kg Maximum value of SAR (measured) = 0.583 W/kg 0 dB = 0.583 W/kg = -2.34 dBW/kg Date: 2014-4-11 Test Laboratory: HUAWEI SAR/HAC Lab Y336-A1 GSM1900 661CH Front side 15mm DUT: HUAWEI Y336-A1, Y336-A1; Type: Smart Phone ; Serial: SAR1 Communication System: UID 0, HW-GSM\GPRS\EGPRS-1TS (0); Frequency: 1880 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 1880 MHz; σ = 1.482 S/m; ε r = 53.276; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: lProbe: ES3DV3 - SN3168; ConvF(4.72, 4.72, 4.72); Calibrated: 2013-9- 30; lSensor-Surface: 3mm (Mechanical Surface Detection), z = 2.0, 32.0 lElectronics: DAE4 Sn1236; Calibrated: 2013-11-25 lPhantom: SAM1; Type: SAM; Serial: TP-1475 lDASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Configuration/Body/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.363 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.720 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.485 W/kg SAR(1 g) = 0.309 W/kg; SAR(10 g) = 0.194 W/kg Maximum value of SAR (measured) = 0.361 W/kg 0 dB = 0.361 W/kg = -4.42 dBW/kg Date: 2014-4-12 Test Laboratory: HUAWEI SAR/HAC Lab Y336-A1 GSM1900 GPRS 2TS 810CH Bottom side 10mm DUT: HUAWEI Y336-A1, Y336…

Text truncated - open the document above for the full version.