QLNVP824BWFBR2.4GHz Wi-Fi Bridge/Router

Copyright © 2003, Vivato, Inc.Vivato Wi-Fi Bridge/Router User Guidei Vivato Wi-Fi Bridge/Router User Guide Manual Part Number: 730-01362-02 Printed in U.S.A. ™ iiVivato Wi-Fi Bridge/Router User GuideCopyright © 2003, Vivato, Inc. Copyright © 2003, Vivato, Inc. All rights reserved. No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission from Vivato, Inc. Who Should Read This Book? The Vivato Bridge/Router and Wi-Fi Switch System introduce a new category of Wi-Fi products. Anyone installing this product, configuring this product for operation, or performing network management operations involving this product, should read this document before working with the Bridge/Router. Printing This Book To print this book from the User Guide.PDF file on the Bridge/Router CD-ROM, open the file in Adobe® Acrobat® or Acrobat Reader® and select File>Page Setup. Configure your printer to print 8.5”x11”, portrait orientation, 2-sided. Unless you need the entire manual printed, Vivato suggests that you print only the required portion(s). Vivato Wi-Fi Bridge/Router User Guideiii VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS LIMITED WARRANTY Vivato, Inc. ("Vivato") warrants that the hardware of the Vivato products ("Product") will be free from defects in material and workmanship under normal use for a period of one (1) year (i) if purchased directly from Vivato, from the date of shipment by Vivato to End User, or (ii) if purchased from a Vivato authorized reseller ("Reseller"), from the date of shipment by Reseller to End User. Vivato warrants that the media upon which software (“Software”) is provided will be free from defects in material and workmanship under normal use for a period of ninety (90) days (i) if purchased directly from Vivato, from the date of shipment by Vivato to End User, or (ii) if purchased from a Reseller, from the date of shipment by Reseller to End User. Except for the forgoing, the Software is provided "AS IS" with all faults and without warranty of any kind. This limited warranty extends only to the End User who is the original purchaser of the Product and licensee of the Software and may not be transferred to any other party. The date of original shipment of Product and Software shall be determined by the information on file at Vivato regarding End User in accordance with Vivato's then current procedures. REMEDY End User's sole and exclusive remedy, and Vivato's entire liability under this Limited Warranty in the event that Product or Software does not perform as warranted above, will be, at Vivato's or its service center's option, to repair or replace such Product or Software or to refund the purchase price paid for such Product or Software. Vivato's obligations hereunder are conditioned upon the return, freight pre-paid of the alleged affected Product or Software in accordance with Vivato's or its service centers then current Return Material Authorizations ("RMA") procedure. All warranty claims shall be directed to Vivato’s technical assistance center as designated by Vivato’s web site (www.vivato.net). Vivato or its authorized repair center shall have the right to inspect the Product or Software claimed as not performing as warranted. This warranty is conditioned upon receipt by Vivato of notice of any alleged covered manufacturing defect in material or workmanship within thirty (30) days after discovery, subject to the warranty period. In no event shall Vivato be responsible for any costs associated with the removal (or re-installation) of Product or Software from (or into) items into which such Product or Software have been integrated by Buyer (or other third parties), or costs associated with other products into which the Product or Software may have been integrated or used. After receiving an RMA for Product or Software, End User shall ship such Product, Software or component thereof, clearly identifying it with its RMA, to Vivato’s designated repair facility in its original shipping cartons or equivalent, freight prepaid. Damage to Product or Software that occurs during return shipment will not be covered by this warranty. Upon receipt of the Product or Software returned in accordance with Vivato's then current RMA procedure, Vivato, at its option, shall (i) repair or replace such Product, Software or component thereof with equivalent or better, new or refurbished Product, Software or parts, and shall return the repaired or replaced Product or Software to End User freight prepaid by Vivato, or (ii) refund the purchase price of such Product or Software. The remainder of the original warranty coverage shall apply to such repaired or replacement Product or Software. LIMITATIONS OF WARRANTY This warranty does not apply to Product or Software which fails to perform as warranted due to: (a) improper handling, installation, removal, repair, maintenance, abuse or improper use; (b) damage caused by vandalism, severe weather, lightning, chemical hazards, fire, contact with high-voltage power lines or other electrical stress; (c) repairs, modifications, or any alterations performed or attempted by End User or ivVivato Wi-Fi Bridge/Router User Guide VIVATO, INC. END USER LIMITED WARRANTY AND LICENSE TERMS any third party, unless authorized by Vivato as stated below; (d) use in conjunction with equipment which is not compatible with Product or Software; (e) documentation errors; (f) software errors; or (g) Product or Software provided to End User for evaluation, testing, demonstration or other purposes for which Vivato does not receive payment of purchase price or license fee. Vivato does not warrant or accept any responsibility for Product or Software, which has been repaired or altered by anyone other than Vivato, or a Vivato authorized service center. In the event …

Text truncated - open the document above for the full version.

1 Mike Kuo From: Claire Hoque Sent: November072003Friday 11:58 AM To: Mike Kuo Cc: Don Erwin; Thu Chan Subject: URGENT! Vivato Inc. FCC ID:QLNVP824BWFBR, AN03T3319 Importance: High Hi Mike, Here are the answers from Vivato. Pls kindly issue the grant TODAY, if there are no more questions. Vivato is very anxious to get the grant. Question #1: Antenna specification and test report listed the antenna gain is 2 dBi. However, in the theory of operation and user manual ( page 17), the antenna gain is listed as 2.2 dBi. Please explain the differences and confirm the antenna gain that was used during the tests. <Vivato>Clarified that the antennas are 2.0 dBi. Please see attached antenna data sheet. Users guide and Theory of Ops have been modified(as attached) S181TC-2450S.pdfTheory of Operation(revised).P... User Manual(revised).pdf Question #2: Per the information given in page 37-39 of user manual, the user can select the channel number for the best performance. Page 20 of user manual listed the frequency range for this device is from 2400-2497MHz. Please confirm that this device will only be capable of operating from 2412-2462MHz within the U.S. End user will not be able to select the channel beyond 11 channel. <Vivato>Changed frequency range on page 20 to say 2412 MHz to 2462 MHz. Clarified channel setting sections to say that only channels 1 through 11 are supported. The control software does not allow you to select a channel above 11. Question #3: Please confirm antenna connector type. Antenna specification indicates the antenna connector is a standard TNC with male connector but the user manual indicates the antenna connector is reverse polarity TNC connector. If standard TNC antenna connectors are used, the grant will be limited that this device must be professionally installed. <Vivato>Antenna connector is reverse polarity TNC. Please see attached antenna data sheet - we are using alternative part# S181TR-2450S. Question #4: User manual does not contain information required per section 15.21 and 15.105(b) of FCC rules. In addition, RF exposure warning statement did not include in user manual. Please provide revised user manual to address these requirements. <Vivato>The following information is already in the user guide in the "FCC Declaration of Conformity" section. "Do not substitute any parts or modify the product. Any unauthorized changes to the product could result in compromising the safety features or the correct operation of the product." The Vivato Wi-Fi Bridge/Router has been evaluated under FCC Bulletin OET 65C and found to be compliant to the requirements set forth in CFR 47 15.247 (b) (4) addressing RF Exposure from radio frequency devices. The Wi-Fi Bridge/Router must be at least 20 cm (7.8 in.) from people when operating. From part 15.21, Added to Safety Information in the "Do not substitute any parts or modify this product" paragraph: "Changes or modifications not expressly approved by Vivato compliance could void the user's authority to operate the equipment. Refer any service or repair to authorized Vivato personnel or its certified agent." Part 15.105(b) is already in the Safety section. 2 Question #5: Based upon the description of test report, two identical Mini-PCI module are used in this device, please explain why the RF conducted output power measurement has 1 dB differences at high channel. <Vivato>A 1dB variance could be attributed to module calibration, cable loss, temperature, or a combination of any or all. Question #6: What was data rate used during the measurement ? <Vivato>The data rate was 11Mbps. Thanks, Claire

Figure 1 - Front Figure 2 – Back Figure 3 - Front with antennas Figure 4 - Back with antennas Figure 5 - Right Antenna port Figure 6 - Left Antenna port Figure 7 - Right Antenna Figure 8 - Left Antenna Figure 9 - Power & LAN Figure 10 - RS232 & RESET Figure 11 - I/O port s with cables attached

PROPOSED FCC ID LABEL AND LOCATION VIVATO, INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: QLNVP824BWFBR FCC ID LABEL LOCATION Vivato Wi-Fi Bridge/Router This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Input 12 VDC @ 1 Amp FCC ID: QLNVP824BWFBR IC: 4563A-VP824BBR For home or office use. SEE MANUAL BEFORE USE Vivato, Inc. 139 Townsend Street, Suite 200 San Francisco, CA 94107 www.vivato.net Manufactured in Taiwan

Figure 1 - Inside top cover Figure 2 - Inside bottom plate Figure 3 - Digital board bottom Figure 4 - Digital board with radios Figure 5 - Digital board without radios Figure 6 - Digital board Figure 7 - Side of digital board Figure 8 - Side of Digital board -2 Figure 9 - Power, LAN, RS-232 Figure 10 - Cable with RF choke Figure 11 - Radio card bottom Figure 12 - Radio card bottom-2 Figure 13 - Radio card top with shield Figure 14 - Radio card top without shield Figure 15 - Top of radio card - no shield

FCC CFR47 PART 15 SUBPART C CERTIFICATION TEST REPORT FOR 802.11 2.4GHz Wi-Fi Bridge/Router MODEL NUMBER: Vivato 2.4 GHz Wi-Fi Bridge/Router BRAND NAME: Vivato Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR REPORT NUMBER: 03U2189-1 ISSUE DATE: SEPTEMBER 3, 2003 Prepared for VIVATO, INC. 12610 E. MIRABEAU PKWY,SUITE 900 SPOKANE, WA. 99216 USA Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD, MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888 REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 2 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION.................................................................................................3 2. EUT DESCRIPTION.........................................................................................................................4 3. TEST METHODOLOGY..................................................................................................................5 4. FACILITIES AND ACCREDITATION..........................................................................................5 4.1. FACILITIES AND EQUIPMENT.................................................................................................5 4.2. TABLE OF ACCREDITATIONS AND LISTINGS........................................................................6 5. CALIBRATION AND UNCERTAINTY.........................................................................................7 5.1. MEASURING INSTRUMENT CALIBRATION............................................................................7 5.2. MEASUREMENT UNCERTAINTY..............................................................................................7 5.3. TEST AND MEASUREMENT EQUIPMENT...............................................................................8 6. SETUP OF EQUIPMENT UNDER TEST.......................................................................................9 7. APPLICABLE LIMITS AND TEST RESULTS...........................................................................11 7.1. 6 dB BANDWIDTH.....................................................................................................................11 7.2. 99% BANDWIDTH.....................................................................................................................15 7.3. PEAK OUTPUT POWER...........................................................................................................19 7.4. MAXIMUM PERMISSIBLE EXPOSURE...................................................................................27 7.5. AVERAGE POWER....................................................................................................................29 7.6. PEAK POWER SPECTRAL DENSITY.......................................................................................30 7.7. CONDUCTED SPURIOUS EMISSIONS...................................................................................34 7.8. RADIATED EMISSIONS............................................................................................................41 7.9. CO-LOCATED RADIATED EMISSIONS..................................................................................57 7.10. POWERLINE CONDUCTED EMISSIONS............................................................................67 8. SETUP PHOTOS..............................................................................................................................71 REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 3 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. TEST RESULT CERTIFICATION COMPANY NAME: VIVATO, INC. 12610 E. MIRABEAU PKWY,SUITE 900 SPOKANE, WA. 99216, USA EUT DESCRIPTION: 802.11 2.4GHZ WI-FI BRIDGE/ROUTER MODEL: VIVATO 2.4 GHZ WI-FI BRIDGE/ROUTER DATE TESTED: AUGUST 25, 2003 TO AUGUST 27, 2003 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15 SUBPART C NO NON-COMPLIANCE NOTED Compliance Certification Services, Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services will constitute fraud and shall nullify the document. Approved & Released For CCS By: Tested By: THU CHAN YAN ZHENG EMC SUPERVISOR EMC ENGINEER COMPLIANCE CERTIFICATION SERVICES COMPLIANCE CERTIFICATION SERVICES REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 4 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certifica…

Text truncated - open the document above for the full version.

REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 71 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 8. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 72 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. RADIATED RF MEASUREMENT SETUP RADIATED FRONT PHOTO REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 73 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. RADIATED BACK PHOTO REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 74 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO REPORT NO: 03U2189-1 DATE: SEPTEMBER 3, 2003 EUT: 802.11 2.4GHz Wi-Fi Bridge/Router FCC ID: QLNVP824BWFBR Page 75 of 75 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. END OF REPORT LINE CONDUCTED BACK PHOTO