QNP-AER02RemoteTunes with Dock Connector

Quick Start RemoteTunes TM with Dock Connector iPod® is a trademark of Apple Computer, Inc. registered in the US and other countries Features and specifications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. © 2006, Targus Group International, Inc. and Targus, Inc. Introduction Congratulations on purchasing Targus RemoteTunes with Dock Connector. This device gives up to 150 feet wireless control of your iPod® within your home or on the go. The compact, lightweight remote design is perfect for mobile users. You can charge your iPod by using the dock connector so the iPod will never be low on battery. List of Contents • RemoteTunes Remote • Receiver • Belt Clip • 3 foot RCA cable CAUTION : Using an incompatible accessory with your iPod products could lead to its damage or malfunction. AER02US 400-0324-001A Receiver Operating Instructions iPod RF receiver setup: Plug RemoteTunes into the dock connector located on the bottom of your iPod and WAIT 30 seconds. A self-diagnostic will automatically run and your wireless remote will be ready for operation once the process is complete. To sync or charge the iPod, simply plug your charging cable into the bottom of the RemoteTunes receiver while it’s connected to the iPod. Advanced Low Power Mode (ALPM): RemoteTunes uses an advanced power down mode which minimises current draw on your iPod battery if you are not connected to a constant power source. After 20 minutes of sensing no music playing or no remote commands being sent, the RemoteTunes goes into a battery saving mode. The RemoteTunes receiver will automatically re-power itself when it detects music playing or when a remote button is pressed for more than 0.6 seconds. Pair up to 10 RemoteTunes remote with any RemoteTunes receiver. Pairing instructions: 1) Unplug the RemoteTunes receiver from your iPod. 2) Make sure your iPod is sufficiently charged. 3) Plug the RemoteTunes receiver into the iPod dock connector. 4) Within the 30 seconds of step 3, simultaneously press and hold, for 3 seconds, the Vol. +, Vol. -, forward and rewind buttons. 5) The remote has been paired. Extra Features Enjoy your favourite music from your stereo system by using the RCA cable. Simply plug the 3.5mm headphone jack to your iPod and connect the RCA jacks to your stereo’s audio inputs. Using the RCA cable iPod with video iPod mini iPod 4G iPod 3G* Remote Control Function Rewind: Press and release this button to move to the previous track. Press and HOLD this button to rewind through the track Playlist: Press and release this button to activate the playlist mode. The LED on the remote will begin to flash very quickly, while it flashes (approximately 5 seconds) move through playlists using the Rewind and Forward buttons. * Playlist function is not compatible with the 3G version of the iPod. Volume Down: Press and HOLD this button to scroll volume down. Volume Up: Press and HOLD this button to scroll volume up. Forward: Press and release this button to move to the next track. Press and HOLD this button to forward through the track. Shuffle: Press and release to toggle between shuffle on/off . * Shuffle function is not compatible with the 3G version of the iPod. Play/Pause/Sleep: Press and release to toggle between Pause and Play. Press and HOLD for 2 full seconds to put the iPod into sleep mode. You press and hold this button for longer than 1 second but less than 2 seconds the RemoteTunes will ignore your request. Remote control + - Features and specifications subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. © 2006 Targus Group International, Inc. and Targus Group (UK) Ltd. iPod photo Quick Start iPod® is a trademark of Apple Computer, Inc. registered in the US and other countries Features and specifications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. © 2006, Targus Group International, Inc. and Targus, Inc. AER02US 400-0324-001A Technical Support For technical questions, please visit: Internet: http://www.targus.com/support.asp Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to: http://www.targus.com/registration.asp You will need to provide your full name, email address, phone number, and company information (if applicable). Warranty Targus warrants this product to be free from defects in materials and workmanship for one years. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to a computer; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights. Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfu…

Text truncated - open the document above for the full version.

Date: June 15, 2006 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jessica Chang /Office Manager Secure Wireless Inc., REMARK : 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

Date :August 31, 2006 Federal Communications Commission Authorization and Evaluation Division FCC ID: QNP-AER02 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1. Schematics 2. Operational Description 3. Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jessica Chang/office manager Taiwan

Compliance Certification Services Inc. Report No.: 60717205 Date of Issue: August 22, 2006 Page PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: 60717205 Date of Issue: August 22, 2006 Page Compliance Certification Services Inc. Report No.: 60717205 Date of Issue: August 22, 2006 Page

FCC ID LABEL FORMAT AND LOCATION Applicant: Secure Wireless, Inc. FCC ID: QNP-AER02 FCC ID: QNP-AER02 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

Compliance Certification Services Inc. Report No.: 60717205 Date of Issue: August 22, 2006 Page Compliance Certification Services Inc. Report No.: 60717205 Date of Issue: August 22, 2006 Page

Compliance Certification Services Inc. Report No.: 60717205-RP1 FCC ID: QNP-AER02 Date of Issue: August 22, 2006 Page 1 of 20 Rev. 00 FCC ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT CERTIFICATION TO FCC PART 15 REQUIREMENTS for INTENTIONAL RADIATOR of RemoteTunes with Dock Connector FCC ID Number : QNP-AER02 Trade Name : Targus Model Number : AER02 Agency Series : N/A Report Number : 60717205-RP1 Date : August 22, 2006 Prepared to Secure Wireless, Inc. 1185 PARK CENTER DRIVE SUITE, A AND B VISTA, CALIFORNIA, 92083 U.S.A. Prepared by Compliance Certification Services Inc. No. 163-1, Chung Sheng Road, Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. TEL: (02)2217-0894 FAX: (02)2217-1029 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. Report No.: 60717205-RP1 FCC ID: QNP-AER02 Date of Issue: August 22, 2006 Page 2 Rev. 00 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE................................................3 2. PRODUCT DESCRIPTION.................................................................4 3. TEST FACILITY...................................................................................4 4. MEASUREMENT STANDARDS.........................................................4 5. TEST METHODOLOGY.....................................................................4 6. MEASUREMENT EQUIPMENT USED.............................................5 7. POWERLINE RFI LIMIT....................................................................5 8. RADIATED EMISSION LIMITS.........................................................6 9. SYSTEM TEST CONFIGURATION...................................................6 10. TEST PROCEDURE..........................................................................7 11. Equipment Modifications.....................................................................8 12. TEST RESULT....................................................................................9 12.1 Maximum Modulation Percentage (M%)..........................................9 12.2 The Emissions Bandwidth.................................................................9 APPENDIX I............................................................................................10 Compliance Certification Services Inc. Report No.: 60717205-RP1 FCC ID: QNP-AER02 Date of Issue: August 22, 2006 Page 3 Rev. 00 1. VERIFICATION OF COMPLIANCE COMPANY NAME : Secure Wireless, Inc. 1185 PARK CENTER DRIVE SUITE, A AND B VISTA, CALIFORNIA, 92083 U.S.A. CONTACT PERSON : Jeff Christsten TELEPHONE NO. : 760-727-0601 EUT DESCRIPTION : RemoteTunes with Dock Connector MODEL NAME/NUMBER : AER02 FCC ID : QNP-AER02 DATE TESTED : August 5, 2006 ~ August 18, 2006 REPORT NUMBER : 60717205-RP1 TYPE OF EQUIPMENT SECURITY EQUIPMENT (INTENTIONAL RADIATOR) EQUIPMENT TYPE RemoteTunes with Dock Connector MEASUREMENT PROCEDURE ANSI 63.4 / 2003 LIMIT TYPE CERTIFICATION FCC RULE CFR 47, PART 15 The above equipment was tested by Compliance Certification Services Inc. for compliance with the requirements set forth in the FCC CFR 47, PART 15. The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Warning: This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services Inc. will constitute fraud and shall nullify the document. Approved by: Reviewed by: Compliance Certification Services Inc. Report No.: 60717205-RP1 FCC ID: QNP-AER02 Date of Issue: August 22, 2006 Page 4 Rev. 00 2. PRODUCT DESCRIPTION Fundamental Frequency 433.92MHz Power Source 3V Battery Transmitting Time Periodic < 5 seconds Associated Receiver Model: iBaseRX (DoC) 3. TEST FACILITY The open area test sites and conducted measurement facilities used to collect the radiated data are located at No. 165, Chung Sheng Road, Hsin Tien City, Taipei, Taiwan R.O.C. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. 4. MEASUREMENT STANDARDS The site is constructed and calibrated in conformance with the requirements of ANSI C63.4/2003. 5. TEST METHODOLOGY For an intentional radiator, the spectrum shall be investigated from the lowest radio frequency signal generated in the device, without going below 9 KHz, up to at least the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. (CFR 47 Section 15.33) Compliance Certification Services Inc. Report No.: 60717205-RP1 FCC ID: QNP-AER02 Date of Issue: August 22, 2006 Page 5 Rev. 00 6. MEASUREMENT EQUIPMENT USED Open Area Test Site # K Name of Equipment Manufacturer Model Serial Number Calibration Due SITE NSA CCS K Site N/A 10/01/2006 MEASURE RECEIVER SCHAFFNER SCR3501 412 05/18/2007 SPECTRUM ANALYZER ADVANTEST R3132 120900029 No Calibration Required ANTENNA SCHAFFNER CBL 6112B 2846 05/26/2007 PRE- AMPLIFIER SCHAFFNER CPA9231A 3639 10/08/2006 CABLE SUHNER RG 214 N-TYPE #K2 02/17/2007 THERMO- HYGRO METER TFA N/A NO.4 02/08/2007 Above 1GHz Used EMC ANALYZER (100Hz-22GHz) HP 8566B 2937A06102 07/04/2007 ANTENNA (1-18GHz) EMCO 3115 00022256 01/12/2007 AMPLIFIER (1-18GHz) HP 8449B 3008A01266 02/06/2007 CABLE (1-18GHz) JYEBAO LL142 SMA#RS1 02/06/2007 CABLE (1-18GHz) HUBER +SUHNER SUCOFLEX 104 SMA#RS3 02/06/2007 CABLE (1-18GHz) JYEBAO LL142 SMA#C1 02/06/2007 Remark: Each piece of equipment is scheduled for calibration once a year. 7. POWERLINE RFI LIMIT CONNECTED TO AC POWER LINE SECTION 15.207 CARRIER CURRENT SYSTEM IN THE FREQUENCY RANGE OF 450 KHz TO 30 MHz SECTION 15.205 AND SECTION 15.209, 15.2…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: 60717205-RP1 FCC ID: QNP-AER02 Date of Issue: August 22, 2006 Page 6 Rev. 00 8. RADIATED EMISSION LIMITS GENERAL REQUIREMENTS SECTION 15.209 RESTRICTED BANDS OF OPERATION SECTION 15.205 PERIODIC OPERATION IN THE BAND 40.66 -40.70 MHz AND ABOVE 70 MHz. SECTION 15.231 9. SYSTEM TEST CONFIGURATION Use a block of foam and combined it with EUT wrapping rubber band around it. This way it can test X, Y and Z axis. To activate continuous transmitting & receiving, place a small plastic block between rubber band and EUT push button. Radiated Open Site Test Set-up