QNP-EVREMWireless Hme Security Remote Transmitter

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:- (1) This device may not cause harmful interference. (2) This device must accept any interference received : including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio of TV interference caused by unauthorized modification to this equipment. Such modification could void the user’ authority to operate the equipment.

Report Number: 03E1033-D June 27, 2003 Page 11 Rev. 00 External of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: Secure Wireless, Inc. FCC ID: QNP-EVREM FCC ID: QNP-EVREM This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

Report Number: 03E1033-D June 27, 2003 Page 12 Rev. 00 Internal of EUT Report Number: 03E1033-D June 27, 2003 Page 13 Rev. 00

EV-REM Transmitter Operational Description The EV-REM transmitter is a low powered, which is hand held unit for remote home security and other features. See the function descriptions in attached. The sensor is powered by a 6 volt battery. It is designed to operate on a single fixed frequency at 433.92 MHz. See the attached block diagram and schematic. There are 4 switches trigger the integrated circuit (IC1) which produces the digital control signals and will modulate the carrier signal (ASK). The carrier signal is generated by a SAW (X1) oscillator/amplifier circuit comprised of a 433.92MHz frequency. The modulated output of the RF stage is coupled to the strip antenna. The antenna is on-board soldered, around 80mm. The transmitter is operated by the triggered momentarily within 0.2 second and will automatically deactivate send signal to receiver. This feature is incorporated by the U1 internally. All tuning and verification are performed by the manufacture and there are no adjustments can be made by user. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received: including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio of TV interference caused by unauthorized modification to this equipment. Such modification could void the user’ authority to operate the equipment.

EV-REM TX Custom 01 Monday, October 14, 2002 HCS-300.DSN TitleSize Document Number Rev Date: Sheet of SW1 1 2 IC1HCS 300 S0 1 S1 2 S2 3 S3 4 VSS 5 PWM 6 LED 7 VDD 8 X1433.92MHZ 12 TR1H10 2 31 L1ANT 12 BT16V 12 JP1 4 HEADER 1234 C24.7P 12 R222K 1 2 LED1LED 1 2 R147 1 2 C11.5P 12 SW2 1 2 SW3 1 2 SW4 1 2 C3390P 12 R51K 12 R382nH 12

Report Number: 03E1033-D June 27, 2003 Page 1 of 14 Rev. 00 FCC ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT CERTIFICATION TO FCC PART 15 REQUIREMENTS for INTENTIONAL RADIATOR of Wireless home security interface remote FCC ID Number : QNP-EVREM Trade Name : Evolution Model Number : EV-REM Agency Series : N/A Report Number : 03E1033-D Date : June 27, 2003 Prepared for Secure Wireless, Inc. 1185 Park Center Dr Suite A/B Vista, CA 92083, United States Prepared by C&C LABORATORY CO., LTD. No. 163-1, Chung Sheng Road, Hsin Tien City, Taipei, Taiwan, R. O. C. TEL: (02)2217-0894 FAX: (02)2217-1029 This report shall not be reproduced, except in full, without the written approval of C&C Laboratory Co., Ltd. Lab. Code: 200617-0 Report Number: 03E1033-D June 27, 2003 Page 2 Rev. 00 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ............................................................... 3 2. PRODUCT DESCRIPTION................................................................................. 4 3. TEST FACILITY ................................................................................................... 4 4. MEASUREMENT STANDARDS ....................................................................... 4 5. TEST METHODLOGY ........................................................................................ 4 6. MEASUREMENT EQUIPMENT USED ........................................................... 5 7. POWERLINE RFI LIMIT.................................................................................... 5 8. RADIATED EMISSION LIMITS ....................................................................... 6 9. SYSTEM TEST CONFIGURATION ................................................................. 6 10. TEST PROCEDURE ............................................................................................. 7 11. EQUIPMENT MODIFICATIONS...................................................................... 8 12. TEST RESULT ....................................................................................................... 9 12.1. MAXIMUM MODULATION PERCENTAGE(M%).................................. 9 12.2. THE EMISSIONS BANDWIDTH ................................................................... 9 APPENDIX 1 PHOTOGRAPHS OF EUT .............................................................. 10 APPENDIX 2 TEST DATA ....................................................................................... 14 Report Number: 03E1033-D June 27, 2003 Page 3 Rev. 00 1. VERIFICATION OF COMPLIANCE COMPANY NAME : Secure Wireless, Inc. 1185 Park Center Dr Suite A/B Vista, CA 92083, United States CONTACT PERSON : Michael Lamb / Jeff Christensen TELEPHONE NO. : 866-966 9473 EUT DESCRIPTION : Wireless home security interface remote MODEL NAME/NUMBER : EV-REM FCC ID : QNP-EVREM DATE TESTED : May 15, 2003 ~ June 23, 2003 REPORT NUMBER : 03E1033 TYPE OF EQUIPMENT SECURITY EQUIPMENT (INTENTIONAL RADIATOR) EQUIPMENT TYPE 433.92 MHz Wireless home security interface remote MEASUREMENT PROCEDURE ANSI 63.4 / 1992 LIMIT TYPE CERTIFICATION FCC RULE CFR 47, PART 15 The above equipment was tested by C&C Laboratory Co., Ltd. for compliance with the requirements set forth in the FCC CFR 47, PART 15. The results of testing in this report apply to the product/system which was tested only. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Warning: This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Engineering Services, Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by C&C Laboratory Co., Ltd. will constitute fraud and shall nullify the document. Vince Chiang / Supervisor C&C Laboratory Co., Ltd. Report Number: 03E1033-D June 27, 2003 Page 4 Rev. 00 2. PRODUCT DESCRIPTION Fundamental Frequency 433.92 MHz Power Source 6V Battery Transmitting Time Periodic < 5 seconds Associated Receiver Model: QNP-EVREC1 (FCC ID) 3. TEST FACILITY The open area test sites and conducted measurement facilities used to collect the radiated data are located at No. 163-1, Chung Sheng Road, Hsin Tien City, Taipei, Taiwan R.O.C. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. 4. MEASUREMENT STANDARDS The site is constructed and calibrated in conformance with the requirements of ANSI C63.4/1992. 5. TEST METHODOLOGY For an intentional radiator, the spectrum shall be investigated from the lowest radio frequency signal generated in the device, without going below 9 KHz, up to at least the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. (CFR 47 Section 15.33) Report Number: 03E1033-D June 27, 2003 Page 5 Rev. 00 6. MEASUREMENT EQUIPMENT USED Manufacturer Model Number Description Cal Due Date SCHAFFNER SCR3501 MEASURE RECEIVER 06/16/04 ADVANTEST R3132 SPECTRUM ANALYZER 09/17/03 SCHAFFNER CBL 6112B ANTENNA 10/02/03 BELDEN 9913 CABLE 10/13/03 SCHAFFNER CPA9231A PRE-AMPLIFIER 10/30/03 7. POWERLINE RFI LIMIT CONNECTED TO AC POWER LINE SECTION 15.207 CARRIER CURRENT SYSTEM IN THE FREQUENCY RANGE OF 450 KHz TO 30 MHz SECTION 15.205 AND SECTION 15.209, 15.221, 15.223, 15.225 OR 15.227, AS APPROPRIATE. BATTERY POWER NO REQUIRED. Report Number: 03E1033-D June 27, 2003 Page 6 Rev. 00 8. RADIATED EMISSION LIMITS GENERAL REQUIREMENTS SECTION 15.209 RESTRICTED BANDS OF OPERATION SECTION 15.205 PERIODIC OPERATION IN THE BAND 40.66 -40.70 MHz AND ABOVE 70 MHz. SECTION 15.231 9. SYSTEM TEST CONFIGURATION Use a block of foam and combined it with EUT wrapping rubber band around it. This way it can test X.Y, and Z axis. To activate continuous transmission, place a small plastic block between rubber band and EUT push button. Radiated Open Site Test Set-up Report Number: 03E1033-D June 27, 2003 Pag…

Text truncated - open the document above for the full version.

Report Number: 03E1033-D June 27, 2003 Page 6 Rev. 00 8. RADIATED EMISSION LIMITS GENERAL REQUIREMENTS SECTION 15.209 RESTRICTED BANDS OF OPERATION SECTION 15.205 PERIODIC OPERATION IN THE BAND 40.66 -40.70 MHz AND ABOVE 70 MHz. SECTION 15.231 9. SYSTEM TEST CONFIGURATION Use a block of foam and combined it with EUT wrapping rubber band around it. This way it can test X.Y, and Z axis. To activate continuous transmission, place a small plastic block between rubber band and EUT push button. Radiated Open Site Test Set-up