RFLUX380FIXED WLL TELEPHONE (CDMA)

UBISTAR CO.,LTD.

Click to zoom

Application Details

Equipment Class: TNB - Licensed Non-Broadcast Station Transmitter
Date of Grant: Jan 11, 2006
Application Purpose: Original Equipment
Date of Application: Jan 11, 2006
Equipment Note: FIXED WLL TELEPHONE (CDMA)
Frequency Range: 824.70000000 - 848.31000000
Company: UBISTAR CO.,LTD.
Country: South Korea

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Users Guide Users Guide WARNING! Read this information before using you phone. In August 1996 the Federal Communications Commission(FCC) of the United States with it’s action in Report and Order FCC-96-326 adopted safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guideline are consistent with the safety standard previously set by both U.S and international standards bodies. The design of this phone complies with the phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Body-worn Operation This device was tested for typical body-worn operations with the back of phone kept-cm. from the body. To maintain compliance with FCC RF exposure requirments, maintain a -cm. separation distance between the user’s body and phone, including the antenna. Users Guide Once you have unpacked your phone, make sure that you have all the parts shown below. If piece is missing or broken, please call your customer service. Users Guide Read these simple guidelines before you use your phone. Failure to comply with these guidelines may be dangerous or illegal. Be aware of interference All wireless phones may get interference that could affect performance. Switch off in hospitals Follow any regulations or rules. Switch your phone off near medical equipment. Switch off near blasting Do not use your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules. Use your phone sensibly Use your phone only in the normal position (next to the ear). Do not touch the antenna unnecessarily. Use only qualified service personnel Only qualified personnel may install or repair phone equipment. Use approved accessories and batteries Use only approved accessories and batteries. Do not connect incompatible products. Keep your phone dry Your phone is not water-resistant. Keep it dry. Connecting to other devices When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. Read instructions before you connect to other device When you connect your phone to any other device, read the device’s user guide for detailed safety instructions. Do not connect incompatible products. Remember to make backup copies of all important data. Users Guide Main Unit Handset Antenna User’s Manual Power Adaptor Rechargeable Battery Data Cable(Optional) Users Guide SIM Card Installation The phone requires a Subscriber Identification Module(SIM) for normal operation. The service provider supplies the SIM card, which carries the account information needed to operate the phone. The SIM compartment is on the back of the phone. NOTE: If you don’t have a SIM card, contact your network service provider. 1, Remove the power supply if it has already been connected. The power supply must be removed whenever a SIM card is removed or installed. 2. Remove the SIM comartment cover by removing the screw - see A1 3. Open the SIM comartment holder. 4. Line up the SIM card with the arrow on the SIM card holder - see A2 5. Gently insert the SIM card in the slot of the SIM card holder. 6. Close the SIM card holder. NOTE :Do not force the SIM card holder shut. Make sure the SIM card is aligned properly with the directional arrow on the holder. 7. Reattach the SIM comartment cover with the screw. Connect the Handset Befor you can use the phone, you must connect the handset cable. 1. Connect the handset cable to the handset and phone jack. Location and Setup When you are ready to turn your phone on, fully extend the antenna for best reception. The antenna must be used with main phone unit for best reception. 1. Attach and finger-tighten the antenna. 2. Select a location that is above ground and as close to windows (or exterior walls) as possible to get the best signal. Desk-Mounting A wedge is included with the ACW-1xP800 to be used to position the ACW-1xP800 for easier viewing of the LCD screen and keypad. Attaching the wedge is optional. To attach the wedge, use the following instructions. 1. Slide the wedge tabs on the thin end of the wedge into the bottom tab slots on the ACW- 1xP800. NOTE: Holding the wedge at an angle makes it easier to slide thew wedge tabs into the bottom tab slots. 2. Snap the wedge tabs on the thick end of the wedge into the top tab slots. Emergency Battery Install Battery 1. Remove the battery access door screw located on the bottom of the unit - see A1 2. Install Rechargeable Battery. Users Guide SIM card holder Top tab slots Bottom tab slots SIM comartment cover SIM card A1 A1 A2 Rechargeable Battery battery access door ON/OFF Switch Users Guide 2. Slide the wedge tabs on the thin end of the wedge into the bottom tab slots on the ACW- 1xP800. 3. Mark two hole locations 100mm vertically apart and two holes into the wall. 4. Install the screws (not supplied) into the wall, leaving a gap of approximately 3mm between the screw head and the wall. 5. Align the mounting holes with the screws and mount the ACW-1xP800 onto the screws. Users Guide Wall-Mounting 1. Remove the mounting clip from the cradle and re-insert it with the tab pointing up. Connect the ACW-1xP800 to AC/DC adapter 1. Simply connecting the power adaptor to the back of main phone unit should turn the phone on and three things will happen: 1. The Power LED indicator is turned on 2. The phone beeps and 3. The start-up graphics begin to play The phone will then begin searching for a network signal. When a signal is found, the RSSI icon appears and your phone enters Standby mode. Now the phone is ready for making calls and receiving calls. (If you want to operate with battery, please turn the battery switch on the back of main phone unit. Battery must be placed in first for battery operation) To Power off To turn your phone off,…

Text truncated - open the document above for the full version.

Cover Letter(s)

December 28, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : UBISTAR CO.,LTD. FCC ID : RFLUX380 Request for Confidentiality Gentlemen: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics, Parts list, Block diagram, Turn up Information and Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jin-Sik Min. Director 7F, Seongdo Building, 587-23, Sinsa-Dong, Gangnam-Gu, Seoul, 135-747, KOREA

External Photos

FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. View 1 FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. View 2 FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. View 3 FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. View 4 FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. ANT / BATT. photo FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. Adaptor photo

ID Label/Location Info

Internal Photos

FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. Inside photo FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. Main Board FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. LCD FCC ID: RFLUX380 Copyright Ⓒ 2005, LTA Co., Ltd. Key Pad photo

RF Exposure Info

Ͳ΁΁ͽ ͅʹͲͿ΅͑ͿͲ;Ͷ͑͗͑Ͳ͵͵΃Ͷ ́ ́͑ͫ ͵Ͳ΅Ͳ͑͗͑ͽ΀ʹͲ΅ ͅ΀Ϳ͑΀ͷ͑΅Ͷ ́΅ ͅͿ͸ Άͳ ͅ ́΅Ͳ΃͑ʹ΀͟͝ͽ΅͵͟ ͵ΒΥΖΤ͑ΠΗ͑ΥΖΤΥΚΟΘ͑ͫ͑ͣͦ͑͑ͪ͑͢͢͡͡͠͡ί͑ͩ͢͢͢͠ ΅ΖΤΥ͑ ́ΚΥΖ͑ͫ͑Ͷ ́΅Ͷʹ͹͑ʹΠ͑͟͝ͽΥΕ͑͟ͼΠΣΖΒ ΅ΖΤΥ͑͵ΖΧΚΔΖ͑ͫ͑ ΅ΖΤΥ͑ΣΖΡΠΣΥ͑ΟΠ͑ͫͿΦΞΓΖΣ͑ΠΗ͑ΡΒΘΖ͑ͫ ʹΠΟΥΒΔΥ͑ΡΖΣΤΠΟ͑ͫ΃ΖΤΡΠΟΤΚΓΝΖ͑ΥΖΤΥ͑ͶΟΘΚΟΖΖΣ͑ͫ ͲΡΡΝΚΔΒΟΥ͑΅ΪΡΖ͑ͫ ͷʹʹ͑ʹͽͲ ́ ́ ͅͷ ͅʹͲ΅ ͅ΀Ϳ͑ͫ ͷʹʹ͑΃ΦΝΖ͑΁ΒΣΥ͙Τ͚ ΅ΖΤΥ͑ΣΖΤΦΝΥΤ͑ͫ͑ ͵ΒΥΖ͑ΒΟΕ͑ ́ΚΘΟΒΥΦΣΖΤ͑ͫ͑ ͣͦͩ͢͢͢͡͡͠͠ ΃ΖΡΠΣΥ͑΁ΣΖΡΒΣΖΕ͑ͳΪ͑ͫ͑ ͶΟΘΚΟΖΖΣ͑͠ͼ͟͹͟ͼΒΟΘ ͙ ́ΚΘΟΒΥΦΣΖ͚ ;ΒΟΒ ΘΖΣ͑ͶΟΘΚΟΖΖΣ͑͠ͻΒΪ͑ͼΚΞ ͙ ́ΚΘΟΒΥΦΣΖ͚ {GGGaGlz{zhyW\XXTWWY ͷʹʹ͑ ͅ͵͑ͫ͑΃ͷͽΆΉͤͩ͡ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑͑͢ΠΗ͑ͣ͡ ΅ΖΤΥΚΟΘ͑ΙΒΤ͑ΓΖΖΟ ʹΒΣΣΚΖΕ͑ΠΦΥ͑ΚΟ ͲΔΔΠΣΕΒΟΔΖ͑ΨΚΥΙ͑ͫ ͑͑΅ΙΖ͑΅ΖΤΥΖΕ͑ΕΖΧΚΔΖ͑ΔΠΞΡΝΚΖΤ͑ΨΚΥΙ͑ΥΙΖ͑ΣΖ΢ΦΚΣΖΞΖΟΥΤ͑ΚΟ͑ΣΖΤΡΖΔΥ͑ΠΗ͑ΒΝΝ ΡΒΣΒΞΖΥΖΣΤ͑ΤΦΓΛΖΔΥ͑ΥΠ͑ΥΙΖ͑ΥΖΤΥ͑͟΅ΙΖ͑ΥΖΤΥ͑ΣΖΤΦΝΥΤ͑ΒΟΕ͑ΤΥΒΥΖΞΖΟΥΤ͑ΣΖΝΒΥΖ͑ΠΟΝΪ ΥΠ͑ΥΙΖ͑ΚΥΖΞΤ͑ΥΖΤΥΖΕ͑͟΅ΙΖ͑ΥΖΤΥ͑ΣΖΡΠΣΥ͑ΤΙΒΝΝ͑ΟΠΥ͑ΓΖ͑ΣΖΡΣΠΕΦΔΖΕ͑ΣΖΔΖΡΥ͑ΚΟ͑ΗΦΝΝ͝ ΨΚΥΙΠΦΥ͑ΨΣΚΥΥΖΟ͑ΒΡΡΣΠΧΒΝ͑ΠΗ͑ΥΙΖ͑ΝΒΓΠΣΒΥΠΣΪ͟ ͅͶͶͶ͑΁ͦͣͩͣ͢͞͡͡Ή͑͵ΣΒΗΥ͑ͧͥ͟ ΃ΖΔΠΞΞΖΟΕΖΕ͑΁ΣΒΔΥΚΔΖ͑ΗΠΣ͑͵ΖΥΖΣΞΚΟΚΟΘ͑ΥΙΖ͑΁ΖΒΜ͑ ́ΡΒΥΚΒΝ͞ͲΧΖΣΒΘΖ͑ ́ΡΖΔΚΗΚΔ ͲΓΤΠΣΡΥΚΠΟ͑΃ΒΥΖ͙ ́Ͳ΃͚͑ΚΟ͑ΥΙΖ͑͹ΦΞΒΟ͑ͳΠΕΪ͑͵ΦΖ͑ΥΠ͑ΈΚΣΖΝΖΤΤ͑ʹΠΞΞΦΟΚΔΒΥΚΠΟΤ ͵ΖΧΚΔΖ͑ͫ͑ͶΩΡΖΣΚΞΖΟΥΒΝ͑΅ΖΔΙΟΚ΢ΦΖΤ ͽΚΔΖΟΤΖΕ͑ͿΠΟ͞ͳΣΠΒΕΔΒΤΥ͑΅ΣΒΟΤΞΚΥΥΖΣ͙͑΅Ϳͳ͚ ηͣͪͤͬ͑͟͢͡ͷʹʹ͠΀Ͷ΅͑ͳΦΝΝΖΥΚΟ͑ͧͦ͑ ́ΦΡΡΝΖΞΖΟΥ͑ʹ͙͑ͻΦΝΪ͚͑ͣ͢͡͡ ͼ͟͹͟ͼΒΟΘͻΚΟ͞ ́ΚΜ͑;ΚΟ ʹΖΣΥΚΗΚΔΒΥΚΠΟ ;ΠΕΖΝΤ͑ͫ͑ΆΉͤͩ͡ ͷʹʹ͑ ͅ͵͑ͫ͑΃ͷͽΆΉͤͩ͡ ΅Ί΁Ͷ͑ͫ͑ͷΚΩΖΕ͑Έͽͽ͑΅ΖΝΖΡΙΠΟΖ͙͑ʹ͵;Ͳ͚͑͞΁ΣΠΥΠΥΪΡΖ ́Ͳ΃͑ʹΠΞΡΝΚΒΔΖ͑΅ΖΤΥ͑΃ΖΡΠΣΥ Ͷ ́΅ ́Ͳ΃ͦͣͣ͢͢͡͞͡͡͡ ͨͷ͑͝ ́ΖΠΟΘΕΠ͑ͳΦΚΝΕΚΟΘ͑ͦͩͨͣͤ͑͝͞͝ ́ΚΟΤΒ͞͵ΠΟΘ͝ ͸ΒΟΘΟΒΞ͞͸Φ͑͝ ́ΖΠΦΝ͑ͤͦͨͥͨ͑͢͝͞͝ͼ΀΃ͶͲ 1. SUMMARY FOR SAR TET REPORT --------------------------------------------------------------------- ͤ 1.1 Head Configuration ----------------------------------------------------------------------------------------- - ͤ 1.2 Body Worn Configuration --------------------------------------------------------------------------------- - ͤ 1.3 Measurement Uncertainty -------------------------------------------------------------------------------- - ͤ 2. INTRODUCTION ----------------------------------------------------------------------------------------------- - ͥ 3. DESCRIPTION OF THE DEVICE UNDER TEST ------------------------------------------------------ ͦ 3.1 Antenna Description ---------------------------------------------------------------------------------------- ͦ 3.2 Device Description ------------------------------------------------------------------------------------------ - ͦ 3.3 Battery Option ------------------------------------------------------------------------------------------------ ͦ 4. TEST CONDITIONS ------------------------------------------------------------------------------------------- - ͧ 4.1 Ambient Conditions ----------------------------------------------------------------------------------------- ͧ 4.2 RF Characteristics of The Test Site -------------------------------------------------------------------- - ͧ 4.3 Test Signal, Frequencies, And Output Power -------------------------------------------------------- - ͧ 5. DESCRIPTION OF THE TEST EQUIPMENT ----------------------------------------------------------- - ͨ 5.1 Test System Specifications ------------------------------------------------------------------------------- ͨ 5.2 SAR Measurement Setup --------------------------------------------------------------------------------- ͨ 5.3 DASY 4 E-Field Probe System -------------------------------------------------------------------------- - ͩ 5.4 Phantom & Equivalent Tissues -------------------------------------------------------------------------- - ͢͡ 6. DESCRIPTION OF THE TEST PROCEDURE --------------------------------------------------------- - ͣ͢ 6.1 Definition of Reference Point ----------------------------------------------------------------------------- ͣ͢ 6.2 Test Configuration Positions ----------------------------------------------------------------------------- - ͤ͢ 6.3 Scan Procedures -------------------------------------------------------------------------------------------- - ͧ͢ 6.4 SAR Averaging Methods ---------------------------------------------------------------------------------- - ͧ͢ 7. MEASUREMENT UNCERTAINTY ------------------------------------------------------------------------- ͨ͢ 8. SYSTEM VERIFICATION ------------------------------------------------------------------------------------ - ͩ͢ 8.1 Tissue Verification ------------------------------------------------------------------------------------------ - ͩ͢ 8.2 Test System Validation ------------------------------------------------------------------------------------ - ͩ͢ 9. RESULTS -------------------------------------------------------------------------------------------------------- - ͪ͢ 10. REFERENCES ------------------------------------------------------------------------------------------------ - ͣ͡ APPENDIX A : Validation Test Data of Tissue APPENDIX B : Validation Test Data APPENDIX C : SAR Test Setup Photographs APPENDIX D : SAR Test Data ͑ ͑͑Ͳ΁΁ͶͿ͵ ͅΉ͑Ͷ͑ͫ͑ʹΒΝΚΓΣΒΥΚΠΟ͑ʹΖΣΥΚΗΚΔΒΥΖΤ APPENDIX F : CDMA2000 RC Output Power Table {GGGaGlz{zhyW\XXTWWY ͷʹʹ͑ ͅ͵͑ͫ͑΃ͷͽΆΉͤͩ͡ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑ͣ͑ΠΗ͑ͣ͡ ΅ΒΓΝΖ͑ΠΗ͑ʹΠΟΥΖΟΥΤ ͑͑͑͑͑͑;ΒΩΚΞΦΞ͑΃ΖΤΦΝΥΤ͑ͷΠΦΟΕ͑͵ΦΣΚΟΘ͑ ́Ͳ΃͑ͶΧΒΝΦΒΥΚΠΟ ͑͢͟͢͹ΖΒΕ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͑ ͑͑͑;ΒΩ͑͟ ́Ͳ΃͑;ΖΒΤΦΣΖΞΖΟΥ ;͹Ϋ ʹΙΕͳΞ ͳΒΥΥΖΣΪ ͞͞ ͞ ͞͞ ͞ ͞͞ ͣ͑͢͟ͳΠΕΪ͑ΈΠΣΟ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͑ ͑͑͑;ΒΩ͑͟ ́Ͳ΃͑;ΖΒΤΦΣΖΞΖΟΥ ;͹Ϋ ʹΙΕͳΞ ͳΒΥΥΖΣΪ ͤ͑͢͟;ΖΒΤΦΣΖΞΖΟΥ͑ΆΟΔΖΣΥΒΚΟΥΪ {GGGaGlz{zhyW\XXTWWY ͷʹʹ͑ ͅ͵͑ͫ͑΃ͷͽ ΆΉͤͩ͡ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑΁ΒΘΖ͑ͤ͑ΠΗ͑ͣ͡ ρ͙͑ͩ͑͢͟͢͡Μ͚ͮ͢ ρ͙͑ͣͧͣ͑͢͟Μ͖ͮͣ͑ͪͦ͑͝ʹ΀Ϳͷ ͅ͵ͶͿʹͶ͑ͽͶ·Ͷͽ͚ ʹΠΞΓΚΟΖ͑ ́ΥΒΟΕΒΣΕ͑ΆΟΔΖΣΥΒΚΟΥΪ ͶΩΥΖΟΕΖΕ͑ ́ΥΒΟΕΒΣΕ͑ΆΟΔΖΣΥΒΚΟΥΪ ʹ͵;Ͳ͙͑͑ͣͥͣ͑͟ΕͳΞ͚͑ ́Ͳ΃ ͙Έ͠ΜΘ͚ ͷ΃Ͷ΂ΆͶͿʹΊ ͷ΃Ͷ΂ΆͶͿʹΊ ;ΠΕΦΝΒΥΚΠΟ ʹΠΟΕΦΔΥΖΕ͑΁ΠΨΖΣ͙ΕͳΞ͚ ́ΖΡΒΣΒΥΚΠΟ͑ΥΖΤΥ ΡΠΤΚΥΚΠΟ ͲΟΥΖΟΟΒ ΡΠΤΚΥΚΠΟ ́Ͳ΃ ͙Έ͠ΜΘ͚ ͲΟΥΖΟΟΒ ΡΠΤΚΥΚΠΟ ͑ͶΆ΅͑΅ΪΡΖ ͑΅Ω͑ͷΣΖ΢ΦΖΟΔΪ ͵ΖΧΚΔΖ͑ΥΖΤΥ ΡΠΤΚΥΚΠΟ ;ΠΕΦΝΒΥΚΠΟ ʹΠΟΕΦΔΥΖΕ͑΁ΠΨΖΣ͙ΕͳΞ͚ ͑΃Ω͑ͷΣΖ΢ΦΖΟΔΪ ͑;ΒΩ͑͟΃ͷ͑΀ΦΥΡΦΥ͑΁ΠΨΖΣ ͷΚΩΖΕ͑Έͽͽ͑΅ΖΝΖΡΙΠΟΖ͙͑ʹ͵;Ͳ͚͑͞΁ΣΠΥΠΥΪΡΖ ͩͣͥͨ͑͟͡ί͑ͩͥͩͤ͑͟͢;͹Ϋ͙͑͑ʹ͵;Ͳ͚͑ ͩͧͪͨ͑͟͡ί͑ͩͪͤͤ͑͟͢;͹Ϋ͙͑͑ʹ͵;Ͳ͚͑ ͑͢͟ ́Ά;;Ͳ΃Ί͑ͷ΀΃͑΅Ͷ ́΅͑΃Ͷ΁΀΃΅ ͑͵ΒΥΖ͑ΠΗ͑ΥΖΤΥ ͑ͷʹʹ͑ ͅ͵ ͑;ΖΒΤΦΣΖΞΖΟΥ͑ΡΖΣΗΠΣΞΖΕ͑ΓΪ ͣͦͪ͑͢͢͡͡͠͠͡ί͑ͣͦͩ͢͢͢͡͡͠͠ ΃ͷͽΆΉͤͩ͡ ͻΒΪ͑ͼΚΞ͑΃ΖΤΡΠΟΤΚΓΝΖ͑ΥΖΤΥ͑ΖΟΘΚΟΖΖΣ ͼ͟͹͟ͼΒΟΘ ͩͤͧͦͣ͟ ͤͩͥ ʹ͵;Ͳ ͣͥͣ͟ ́ΥΒΟΕΒΣΕ ͣͦ͟ΔΞ͟͞͡…

Text truncated - open the document above for the full version.

RF Exposure Info

Ͳ΁΁ͶͿ͵ ͅΉ͑Ͷ͑ͫ͑ʹΒΝΚΓΣΒΥΚΠΟ͑ʹΖΣΥΚΗΚΔΒΥΖΤ ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑

RF Exposure Info

Ͳ΁΁ͶͿ͵ ͅΉ͑͵͑ͫ͑ ́Ͳ΃͑΅ΖΤΥ͑͵ΒΥΒ ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑

RF Exposure Info

Ͳ΁΁ͶͿ͵ ͅΉ͑Ͳ͑ͫ͑·ΒΝΚΕΒΥΚΠΟ͑΅ΖΤΥ͑͵ΒΥΒ͑ΠΗ͑΅ΚΤΤΦΖ͑͑ ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑ ͑͞͹ΖΒΕ͑΅ΚΤΤΦΖ ͑͞ͳΠΕΪ͑΅ΚΤΤΦΖ Ͳ΁΁ͶͿ͵ ͅΉ͑ͳ͑ͫ͑·ΒΝΚΕΒΥΚΠΟ͑΅ΖΤΥ͑͵ΒΥΒ ͩͤͦ;͹Ϋ͑͵ΚΡΠΝΖ͑·ΒΝΚΕΒΥΚΠΟ

RF Exposure Info

Ͳ΁΁ͶͿ͵ ͅΉ͑ʹ͑ͫ͑ ́Ͳ΃͑΅ΖΤΥ͑ ́ΖΥΦΡ͑΁ΙΠΥΠΘΣΒΡΙΤ ͷΝΒΥ͑͑͞ͳΠΕΪ͑ ́ΚΕΖ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͙͑ΈΚΥΙ͑ͲΕΒΡΥΖΣ͚ ͷΝΒΥ͑͑͞ͳΠΕΪ͑ ́ΚΕΖ͑ʹΠΟΗΚΘΦΣΒΥΚΠΟ͙͑ΈΚΥΙΠΦΥ͑ͲΕΒΡΥΖΣ͚

Test Report

LTA#LR500110511D Copyright ○ c 2005, LTA Co., Ltd. Page 1 of 28 243 Jubug-Ri,Yangji-Myeon, Yongin-Si, Gyeonggi-Do, Korea 449-822 Tel: +82-31-323-6008 Fax: +82-31-323-6010 http://www.ltalab.com Dates of Tests: November 07 ~ 22, 2005 Test Report S/N: LR500110511D Test Site : LTA CO., LTD. FCC ID APPLICANT TEST REPORT FCC Part 22H / Part 15 Certification Classification : Licensed Non-Broadcast Station Transmitter (TNB) Manufacturing Description : CDMA 2000 1x WLL TELEPHONE Manufacturer : UBISTAR CO.,LTD. Model name : UX380 Test Device Serial No.: : Identification FCC Rule Part(s) : §22(H), §15, §2 TX Frequency Range : 824.70 ~ 848.31 MHz RX Frequency Range : 869.70 ~ 893.31 MHz Max. RF Output Power : 0.476W ERP CDMA (26.78dBm) Max. SAR Measurement : 0.841W/kg CDMA Body SAR Emission Designators: : 1M25F9W Data of issue : November 22, 2005 This test report is issued under the authority of: The test was supervised by: Dong –Min JUNG, Technical Manager Kyung-Taek LEE, Test Engineer This test result only responds to the tested sample. It is not allowed to copy this report even partly without the allowance of the test laboratory. This report must not be used by the applicant to claim product endorsement by any agency. NVLAP LAB Code.: 200723-0 RFLUX380 UBISTAR CO.,LTD. LTA#LR500110511D Copyright ○ c 2005, LTA Co., Ltd. Page 2 of 28 TABLE OF CONTENTS 1. GENERAL INFORMATION’S -------------------------------------------------------------------------- 2. INFORMATION’S ABOUT TEST ITEM ------------------------------------------------------------- 3. TEST REPORT 3.1 SUMMARY OF TESTS ------------------------------------------------------------------------------ 3.2 DESCRIPTION OF TESTS -------------------------------------------------------------------------- 3.2.1 EFFECTIVE RADIATED POWER OUTPUT ----------------------------------------------- 3.2.2 FIELD STRENGTH OF SPURIOUS RADIATION ---------------------------------------- 3.2.3 OCCUPIED BANDWIDTH -------------------------------------------------------------------- 3.2.4 SPURIOUS EMISSION AT ANTENNA TERMINAL ------------------------------------- 3.2.4.1 Occupied Bandwidth Emission Limits ----------------------------------------------------- 3.2.4.2 Conducted Spurious Emission -------------------------------------------------------------- 3.2.5 FREQUENCY STABILITY -------------------------------------------------------------------- 3.2.6 CONDUCTED EMISSION --------------------------------------------------------------------- 3.2.7 RADIATED EMISSION ------------------------------------------------------------------------- 3.3 TEST DATA 3.3.1 EFFECTIVE RADIATED POWER OUTPUT ----------------------------------------------- 3.3.2 FIELD STRENGTH OF SPURIOUS RADIATION ---------------------------------------- 3.3.3 FREQUENCY STABILITY --------------------------------------------------------------------- 3.3.4 CONDUCTED EMISSION --------------------------------------------------------------------- 3.3.5 RADIATED EMISSION ------------------------------------------------------------------------ 3.4 CNNCLUSION ---------------------------------------------------------------------------------------- 3.5 TEST PLOTS ------------------------------------------------------------------------------------------- APPENDIX APPENDIX 1 TEST EQUIPMENT USED FOR TESTS ------------------------------------------ APPENDIX 2 LABEL AND USER’S MANUAL INFORMATION ----------------------------- 3 4 5 6 7 9 10 11 13 15 17 LTA#LR500110511D Copyright ○ c 2005, LTA Co., Ltd. Page 3 of 28 1. General information’s 1-1 Test Performed Company name : LTA Co., Ltd. Address : 243, Jubug-ri,Yangji-Myeon,Youngin-Si, Kyunggi-Do, Korea. 449-822 Web site : http://www.ltalab.com E-mail : [email protected] Telephone : +82-31-323-6008 Facsimile +82-31-323-6010 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competents of calibration and testing laboratory”. 1-2 Accredited agencies LTA Co., Ltd. is approved to perform EMC testing by the following agencies: Agency Country Accreditation No. Validity Reference NVLAP U.S.A 200723-0 2006-09-30 ECT accredited Lab. RRL KOREA KR0049 2007-07-13 EMC accredited Lab. FCC U.S.A 610755 2008-03-28 FCC filing VCCI JAPAN R2133, C2307 2008-06-22 VCCI registration IC CANADA IC5799 2008-04-23 IC filing LTA#LR500110511D Copyright ○ c 2005, LTA Co., Ltd. Page 4 of 28 2. Information’s about test item 2-1 Client Company name : UBISTAR CO.,LTD. Address : 7F, Seongdo Building, 587-23, Sinsa-Dong, Gangnam-Gu, Country : Korea Telephone : +82-2-549-8402 Facsimile : +82-2-543-8265 2-2 Equipment Under Test (EUT) Classification : Licensed Non-Broadcast Station Transmitter (TNB) Trade name : CDMA 2000 1x WLL TELEPHONE Model name : UX380 Serial number : Identification Date of receipt : November 08, 2005 EUT condition : Pre-production, not damaged Antenna type / Gain : Sleeve Dipole Antenna / 2dBi TX Frequency Range : 824.70 ~ 848.31 MHz RX Frequency Range : 869.70 ~ 893.31 MHz Frequency Tolerance : ±0.00025% (2.5ppm) Emission Designators : 1M25F9W Voltage and Current applied through the final Amplifier : 12.0V / 0.997A / 11.964W Power Source : AC Adaptor (Normal) Input: 110/220VAC, 50~60Hz / Output:12VDC/1A Internal Battery (Emergency) Li-Ion 2200mA 2-3 Tested frequency Frequency (CH) TX (MHz) Low (1013) 824.7 Mid (0384) 836.52 High (0777) 848.31 LTA#LR500110511D Copyright ○ c 2005, LTA Co., Ltd. Page 5 of 28 3. Test Report 3.1 Summary of tests Parameter Status Transmitter Requirements Effective Radiated Power Output C Occupied Bandwidth C Field Strength of Spurious Radiation C Spurious Radiation at Antenna Terminal C Frequency Stability C Receiver Requirements Conducted Emission C Radiated Emission C Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable Note 2 : The data in this test report are traceable to the national or international standards. A sample calculation: COR. F (correction factor)= Antenna fac…

Text truncated - open the document above for the full version.

Test Report

Ͳ΁΁ͶͿ͵ ͅΉ͑ͷ͑ͫ͑ʹ͵;Ͳͣ͑͡͡͡΃ʹ͑΀ΦΥΡΦΥ͑΁ΠΨΖΣ͑΅ΒΓΝΖ ΈΖΓ͑ͫ͑ΨΨΨ͑͟ΖΤΥΖΔΙ͑͟ΔΠ͑͟ΜΣ͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑ S09(LoopBack) S055(LoopBack) 23.98 24.09 23.82 23.94 23.91 24.02 23.9823.9124.07 S032(+SCH) 24.0023.92 1013CH 384CH777CH 24.10 S032(+ F-SCH) 23.9423.8924.04 S02(LoopBack) 384CH 24.07 777CH 24.12 S09(LoopBack) 1013CH 24.20 S055(LoopBack) 24.0223.9424.09 S03(Voice) RC3 CONDUCTED POWER OUTPUT S02(LoopBack) 23.99 RC2 CONDUCTED POWER OUTPUTCONDUCTED POWER OUTPUT CDMA-2000 RC Output Power Table(UX380) RC1 777CH384CH 1013CH 23.9424.08 S055(LoopBack) 23.9523.8924.03 S09(LoopBack) 24.0323.9724.12 S03(Voice) 24.0724.0224.16 23.9823.9524.07 S032768(Voice) 23.9823.9424.08 777CH 23.91 1013CH 24.09 384CH 23.83 RC5 CONDUCTED POWER OUTPUT S09(LoopBack) 777CH 24.10 24.07 384CH 24.06 24.04 1013CH 24.16 24.12 S02(LoopBack) S03(Voice) 24.0523.8924.08 S055(LoopBack) 24.0623.9124.07 S032768(Voice) CONDUCTED POWER OUTPUT RC4 S055(LoopBack) 24.0723.9524.09

Test Setup Photos

Contact Information

Applicant

Jin-Sik Min(Director)

[email protected]82-2-549-8402Fax: 82-2-543-8265

Test Firm

LTA Co.,LtdAhn Chulho

[email protected]82-31-323-6008Fax: 82-31-323-6010

Technical Specifications

#	Rule Parts	Frequency Range	Power Output	Emission	Tolerance
1	22H	824.7 MHz - 848.31 MHz	476.00 mW	1M25F9W	2.5000000000 ppm

Confidentiality

Long Term

Grant Notes

Output power listed is ERP. SAR compliance for body-worn operating configuration is based on a separation distance of 2.5cm between the base of the antenna and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR value is: W/kg; Body: 0.841 W/kg.