RNT-KS300USWireless Weather Sensor

 Operating Instructions Combination Weather Sensor KS 300-2US ELV Electronics Ltd. · Hongkong   st English edition May 006 Documentation © 006 ELV Electronics Limited All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged. Printed in Hong Kong Modifications due to technical improvements may be made without prior notification. 0006693 Y006 V.0 These operating instructions belong with this product. They contain important information for putting it into service and operating it. This should be noted also when this product is passed on to a third party. Therefore look after these operating instructions for future reference! A list of contents with the corresponding page numbers can be found in the index on page 4. 3 Introduction Dear Customer, Thank you for purchasing this product. The product has been EMC-tested and thus meets the requirements of the valid national guidelines. See also FCC-Information. In order to maintain this condition and ensure safe operation, you, as the user, have to observe this operating manual. Prior to using the product for the first time, please read the entire operating manual and observe all operating and safety instructions. We should already like to point out now the correct order for commissioning the products. Please also observe the installation and calibration instructions in this operating manual as well as the information about impairment of radio transmission between the sensors and base station. All company names and product descriptions listed herein are the trademarks of the re- spective manufacturers. All rights are reserved. F 4 Table of Contents Page . Intended use ..........................................................................................................................5 . Scope of delivery ................................................................................................................... 6 3. Terminology ...........................................................................................................................6 4. Features and functions ..........................................................................................................6 5. Safety instructions .................................................................................................................6 6. Battery and environment instructions ....................................................................................7 7. Preparation for operation, commissioning ............................................................................7 8. Changing battery ...................................................................................................................9 9. Troubleshooting ...................................................................................................................0 0. Range .................................................................................................................................. . Maintenance and cleaning ................................................................................................... a) General ............................................................................................................................ b) Cleaning combination sensor .......................................................................................... . Handling ..............................................................................................................................4 a) General ............................................................................................................................4 b) Combination sensor ........................................................................................................4 3. Disposal ...............................................................................................................................5 a) General ............................................................................................................................5 b) Disposing of batteries and accumulators ........................................................................5 4. Technical data ......................................................................................................................6 5. FCC-Information ..................................................................................................................7 5 1. Intended use The combination weather sensor is a high-quality universal weather measuring system which processes a large quantity of weather data and additional information. All relevant data are transmitted to an optional base unit. The forecasts of the base station serve only the purpose of orientation. They do not represent an absolutely true forecast. The manufacturer does not assume any responsibility for incorrect displays, measuring values or weather forecasts or any consequences which may result from these. The product is intended for private use. It is not suited for medical purposes or public information. The components of this product are not toys. Install all components in such a way that children have no access to them. The product is battery-operated. All external sensors transmit their data per radio to the base station (433 MHz, range up to 00 m in open space, see chapter 0 on page ). Any other use than that described above may lead to damage to the product or to other danger. Read the complete operating manual carefully. It contains much important informat…

Text truncated - open the document above for the full version.

Operating Instructions Combination Weather Sensor KS 200US ELV Electronics Ltd. · Hongkong  These operating instructions belong with this product. They contain important information for putting it into service and operating it. This should be noted also when this product is passed on to a third party. Therefore look after these operating instructions for future reference! A list of contents with the corresponding page numbers can be found in the index on page 4. 1 st English edition May 2006 Documentation © 2006 ELV Electronics Limited All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged. Printed in Hong Kong Modifications due to technical improvements may be made without prior notification. 00066944 Y2006 V1.0  Introduction Dear Customer, Thank you for purchasing this product. The product has been EMC-tested and thus meets the requirements of the valid national guidelines. See also FCC-Information. In order to maintain this condition and ensure safe operation, you, as the user, have to observe this operating manual. Prior to using the product for the first time, please read the entire operating manual and observe all operating and safety instructions. We should already like to point out now the correct order for commissioning the products. Please also observe the installation and calibration instructions in this operating manual as well as the information about impairment of radio transmission between the sensors and base station. All company names and product descriptions listed herein are the trademarks of the respective manufacturers. All rights are reserved. F 4 Table of Contents Page 1. Intended Use .................................................................................................................... 5 2. Scope of Delivery ............................................................................................................. 6 3. Explanation of Symbols ...................................................................................................6 4. Features and Functions ...................................................................................................7 5. Safety Instructions ........................................................................................................... 7 6. Battery and Accumulator Information ........................................................................... 8 7. Preparation and Start-up ................................................................................................ 9 Start-up of the Multipurpose Sensor ................................................................................. 9 8. Replacing the Battery .................................................................................................... 12 Multipurpose Sensor .......................................................................................................1 9. Troubleshooting ............................................................................................................. 13 10. Coverage ........................................................................................................................ 14 11. Maintenance and Cleaning ........................................................................................... 15 a) General ....................................................................................................................... 15 b) Cleaning the Multipurpose Sensor ............................................................................ 15 12. Handling .......................................................................................................................... 16 a) General ....................................................................................................................... 16 b) Multipurpose Sensor .................................................................................................. 16 13. Disposal .......................................................................................................................... 17 a) General ....................................................................................................................... 17 b) Disposal Instructions for Batteries/Accumulators ..................................................... 17 14. Technical Data ................................................................................................................ 18 15. FCC-Information ............................................................................................................ 19 5 1. Intended Use The combination weather sensor is a high-quality universal weather measuring system which is able to process a large number of weather data and additional information. All relevant data are transmitted to an optional base unit. The forecasts of the basis station are to be considered orientation values. They do not represent an absolutely accurate prognosis. The manufacturer does not take over any responsibility for incorrect indications, measured values or weather forecasts and the consequences thereof. This product is designed for private use and is not suitable for medical purposes or for informing the public. The components of this product are not a toy, they contain fragile glass and ceramic parts. Set up all the components in such a manner that they are out of the reach of children. The product is operated by batteries. All external sensors transmit their data to the base station via radio in the range of 4 MHz (coverage up to 100m in …

Text truncated - open the document above for the full version.

ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks300-2us_extpho.doc Seite : 1 / 2 External Photos Wireless Weather Station Sensor ELV KS 300-2US ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks300-2us_extpho.doc Seite : 2 / 2

ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks200us_extpho.doc Seite : 1 / 2 External Photos Wireless Weather Station Sensor ELV KS 200US ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks200us_extpho.doc Seite : 2 / 2

ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks300-2us_labelloc.doc Seite : 1 / 1 FCC ID Label Location Information Wireless Weather Station Sensor ELV KS300-2US

ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks200us_labelloc.doc Seite : 1 / 1 FCC ID Label Location Information Wireless Weather Station Sensor ELV KS 200US

ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks300-2us_intpho.doc Seite : 1 / 2 Internal Photos Wireless Weather Station Sensor ELV KS 300-2US ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks300-2us_intpho.doc Seite : 2 / 2

ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks200us_intpho.doc Seite : 1 / 2 Internal Photos Wireless Weather Station Sensor ELV KS 200US ELV Electronics Ltd., Hong Kong 24. Mai 2006 Datei: elv_ks200us_intpho.doc Seite : 2 / 2

ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH TEST - REPORT FCC RULES PART 15 / SUBPART C Test report no.: G0M20603-0316-C-1 FCC ID: RNT-KS300US Certificate 1983-01 ELECTRONIC TECHNOLOGY SYSTEMS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN DR. GENZ GMBH PHONE +49-33631-888 00 FAX +49-33631-888 660 ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 1 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Test Procedure 3 Test Results 3.1 Output power 3.2 Out of band radiated emission 3.3 Transmitter radiated emissions in restricted bands 3.4 Spurious emissions radiated, transmitter 3.5 20 dB bandwidth 3.6 Automatical deactivation ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 2 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Futhermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample posseses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extractes from the report requires the prior written approval of the ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH. Tester: 31.05.2006 K. Damm Date ETS-Lab. Name Signature Technical responsibility for area of testing: 31.05.2006 N. Kaspar Date ETS Name Signature ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 3 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1.2 Testing laboratory 1.2.1 Location ELECTRONIC TECHNOLOGY SYSTEM DR. GENZ GMBH (ETS) Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telefon : +49 33631 888 00 Telefax : +49 33631 888 660 1.2.2 Details of accreditation status ACCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: TTI-P-G 126/96-30 A CCREDITED COMPETENT BODY DAR-REGISTRATION NUMBER: BPT-ZE-026/96-00 FCC FILED TEST LABORATORY REG. NO. 96970 A2LA Accredited Certification No.1983-01 BLUETOOTH QUALIFICATION TEST FACILITY (BQTF) Accredited by Bluetooth Qualification Review Board I NDUSTRY CANADA FILED TEST LABORATORY REG. NO. IC 3470 1.3 Details of approval holder Name : ELV Electronics Limited Street : 16/F Kailey Industrial Centre No. 12, Fung Yip Street Town : Chaiwan Country : Hong Kong Telephone : Fax : Contact : Telephone : ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 4 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1.4 Application details Date of receipt of application : 18.03.2006 Date of receipt of test item : 18.03.2006 Date of test : 29.03.2006 - 19.05.2006 1.5 Test item Description of test item : Wireless Weather Station - Outdoor Unit - (Transmitter) Type identification : KS200US Brand Name: ELV Serial number : Test sample without serial number Transmitting frequency : 433.794 MHz Transmitter Operation mode : simplex Transmitting mode : P1D Voltage supply : 4.5 V DC (battery) (3 x 1.5 V DC) Antenna : Internal antenna Photos : see Annex Manufacturer: (if applicable) Name : DJY Electronics Co. Ltd. Street : 518101 3/F Fu Yuan #3 Industrial Building, 45th Area of Bao An District Town : Shen Zhen Country : P.R.C. Additional information : none ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 5 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1.6 Test standards Technical standard : FCC RULES PART 15 / SUBPART B §15.109 / SUBPART C § 15.203, §15.231 2 Technical test 2.1 Summary of test results No deviations from the technical specification(s) were ascertained in the course : of the tests performed. or The deviations as specified in 2.5 were ascertained in the course of the tests … performed. 2.2 Test environment Temperature : 23 ° C Relative humidity content : 20 ... 75 % Air pressure : 86 ... 103 kPa Details of power supply : 4.5 V DC (battery) (3 x 1.5 V DC) ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 6 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 2.3 Test equipment utilized No. Test equipment Type Manufacturer ETS 0001 ESD Gun SESD 30000 Schlöder ETS 0002 Test receiver ESVP Rohde & Schwarz ETS 0003 Diode power sensor NRV-Z2 Rohde & Schwarz ETS 0004 Spectrum and network analyzer FSMS 26 Rohde & Schwarz ETS 0005 Test receiver SMV 11 MEB ETS 0006 Test receiver system SME 12 MEB ETS 0007 Horn antenna AT 4004 ar ETS 0008 Antenna Loop antenna Siemens ETS 0009 Antenna ARA 2 MEB ETS 0010 Antenna Loop antenna MEB ETS 0011 Antenna van Veen/ Frame Rohde & Schwarz ETS 0012 Antenna HK 116 Rohde & Schwarz ETS 0013 Antenna HL 223 Rohde & Schwarz ETS 0014 Antenna HL 025 Rohde & Schwarz ETS 0015 Antenna HL 025 Rohde & Schwarz ETS 0016 Precision antenna kit VHAP Schwarzbeck ETS 0017 Precision antenna kit UHAP Schwarzbeck ETS 0018 Horn antenna BBHA 9120 D Schwarzbeck ETS 0019 Horn antenna BBHA 9120 D Schwarzbeck ETS 0020 Antenna DP 21 MEB ETS 0021 Antenna DP 3 MEB ETS 0022 Antenna SAS-200/ 521 A.H. Systeme+D65 ETS 0023 Antenna DP 1 MEB ETS 0024 Antenna mast AF 2 MEB ETS 0025 Antenna mast AF 2 MEB ETS 0026 Tripod Heinrich Deisel ETS 0027 Tripod Heinrich Deisel ETS 0028 Tripod STA 2 C. Lorenz AG ETS 0…

Text truncated - open the document above for the full version.

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 11 of 12 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0316-C-1 Page 12 of 12

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0315-C-1 Page 12 of 14 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0315-C-1 Page 13 of 14 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20603-0315-C-1 Page 14 of 14