RXZ-WPE71RLWireless PCI Express Adapter

    IEEE802.11n WirelessPCIExpressAdapter            User’sManual                February2010 WPE71RL 1 FCCWarning    FCCCaution:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser’sauthoritytooperatethisequipment. ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptany interferencereceived,includinginterferencethatmaycauseundesiredoperation.  IMPORTANTNOTE: FCCRadiationExposureStatement: ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environment.Thisequipmentshouldbeinstalledandoperatedwithaminimumdistanceofabout eightinches(20cm)betweentheradiatorandyourbody. ThistransmittermustnotbecoͲlocatedoroperatedinconjunctionwithanyotherantennaor transmitter.     This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 2   RevisionHistory RevisionHistory V1.1strelease     Allbrandandproductnamesmentionedinthismanualaretrademarksand/orregisteredtrademarks oftheirrespectiveholders. ! Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC), Low-voltage Directive (2006/95/EC), the procedures given in European Council Directive 99/5/EC and 2004/104/EC. The equipment was passed. The test was performed according to the following European standards: zEN 300 328 V.1.7.1 zEN 301 489-1 V.1.8.1 / EN 301 489-17 V.2.1.1 zEN 62311 zEN 60950-1 Regulatory statement (R&TTE) zEuropean standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz; zIn France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use. Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied. D=0.030m is the minimum safety distance between the EUT and human body when the E-Field strength is 61V/m. D=0.020m 0984 E=9.67977 V/m is the maximum E-Field strength when safety distance between the EUT and human body is maintained at least 20cm, which is below 61V/m as required in Annex III table 2 of EC Council Recommendation (1999/519/EC). This proves that the unit complies with the EN 62311 for RF exposure requirement. 3 Contents 1.Introduction........................................................................... 4 1.1Features..........................................................................................4 1.2LEDIndicator ..................................................................................4 1.3PackageContents ...........................................................................5 1.4Beforeyoustart..............................................................................5 1.5HardwareInstallation .....................................................................5 2. InstallationProcedure............................................................... 7 3.WirelessNetworkConfigurationUtility........................................ 12 3.2UseWZCtoconfigurewirelessadapter.........................................13 3.3WirelessUtilityͲRaUI...................................................................18 3.3.1Profile................................................................................24 3.3.2Network ............................................................................28 3.3.3Advanced...........................................................................30 3.3.4Statistics ............................................................................31 3.3.5WMM ................................................................................32 3.3.6WPS...................................................................................38 3.3.7SSO....................................................................................41 3.3.8CCX....................................................................................42 3.3.9About ................................................................................42 3.3.10LinkStatus .......................................................................43 3.3.11EnableAPModeFeatureinWindows2000OS.................44 3.3.12SoftAP(OnlyWindows7Support)....................................48  4 1. Introduction ThisisawirelessPCIExpressa…

Text truncated - open the document above for the full version.

PRO-NETS TECHNOLOGY CORPORATION 7F, No.95, Li-De St., Chung Ho City 235, Taipei, Taiwan R.O.C. Date:March 9, 2010 Federal Communications Commission Authorization and Evaluation Division FCC IDRXZ-WPE71RL Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1. Schematics 2. Operational Description 3. Block diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application

PRO-NETS TECHNOLOGY CORPORATION 7F, No.95, Li-De St., Chung Ho City 235, Taipei, Taiwan R.O.C. Date:March 9, 2010 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Compliance Certification Services Inc. Address: No. 11, Wugong 6 th Rd., Wugu Towership, Taipei County 24891, Taiwan Mr. Steven Wang Job Title: Section Manager Email: [email protected] I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: PRO-NETS / Speed Com+ / Jet Com Wireless PCI Express Adapter

Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 1 Rev. 00 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 2 Rev. 00 Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 3 Rev. 00 Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 4 Rev. 00

FCC ID: RXZ-WPE71RL WPE71RL 0984 0984 FCC ID: RXZ-WPE71RL WPE71RL 2032200000 ࢤխ WPE71RL ڜ๵၀౐ SIEZ:26x11mm,ٱ႕ࢍػᎭठ౐ PRO-NETS / Speed Com+ / Jet Com PRO-NETS / Speed Com+ / Jet Com

Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 1 Rev. 00 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 2 Rev. 00 Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 3 Rev. 00 Compliance Certification Services Inc. Report No.: T100129201 Date of Issue: March 8, 2010 Page 4 Rev. 00

RFA-02-C2M2-08 Specifications Frequency range 2400 MHz – 2500 MHz Antenna gain 2 dBi VSWR 2.0 : 1 Max. Polarization Linear, vertical Impedance 50 Ө Temperature - 10к to +55к Connector R SMA PLUG ່՛ץᇘၦ 10PCS অࡐཚၴ 24ִଡ ໢ૹ 10g ၦʻʸׂܶᇢʼᇢׂܶၦʻʸʼ ˦˴̀̃˿˸ʳ˶̂́̇˸́̇̆˦˴̀̃˿˸ʳ˶̂́̇˸́̇̆ ˲˲˲˲˲˲˲˲˲˲ ˃ˁˆʾ ˃ˁ˄ ˥ ̆ˠ ̇˸ʾ˦́ˏ˄ˁ˅ ˄ˁˋˀˆˁˊ ˥ ̆ˠ ˃ˁˆʾ ˃ˁ˄ ˆˁˆʾ ˃ˁ˄ ˲˲˲˲˲˲˲˲˲˲ ˲˲˲˲˲˲˲˲˲˲ ˲˲˲˲˲˲˲˲˲˲ ʻ˥˸̀˴̅˾̆ʼ ։࣫୉ ʻ˔́˴˿̌̍˸ʳ˴ʳ̀˸̀˵˸̅ʼ ጥ׌ ʻ˦̈̃˸̅̉˼̆̂̅ʼ Ꭽʻ˖̈ʼ ᔫ ˲˲˲˲˲˲˲˲˲˲ ˲˲˲˲˲˲˲˲˲˲ ˲˲˲˲˲˲˲˲˲˲ ᔱʻ˔˿ʼ˲˲˲˲˲˲˲˲˲˲˲˲˲˲˲˲˲˲˲˲ ˲˲˲˲˲˲˲˲˲˲ ˈˊˁ˃ˀˉ˄ˁ˃ ˈˋˁˋʾ˃ˁ˄ˏ˃ˁˈ ̆˿˸̀˸́̇ʳ́˴̀˸ ˦̇˴́˷˴̅˷ʳ˶̂́̇˸́̇̆ʳ ̆˿˸̀˸́̇ʳ́˴̀˸ ˦̇˴́˷˴̅˷ʳ˶̂́̇˸́̇̆ʳ ցైټጠ ᑑᄷܶၦʻʸʼցైټጠ ᑑᄷܶၦʻʸʼ ց壁८᥆ՠᄐैٝڶૻֆ׹ YUANG-HSIAN METAL INDUSTRIAL CORP. ኦ֏ ؑ 5 0 0 4 2ሁֽኦ 1 7 5ᇆ 175,CHANG SHOEI ROAD,CHANG HUA TAIWAN R.O.C ࠎᚨ೸ټጠ vendor name ૊᠆壄യՠᄐैٝڶૻֆ׹ ˠ˴̊˹̂́˺ʳˣ̅˸˶˼̆˼̂́ʳ ̃́˷̈̆̇̅˼˴˿ʳ˖̂ˁʿʳ˟̇˷ˁ TEL:(04)7524626-8 FAX:886-4-7611717 ʳʳʳʳʳʳˌˈڣ˃ˈִ˃ˋֲ ʳʳʳʳʳʳ˅˃˃ˉˁ˃ˈˁ˃ˋ ᇢʳʳ᧭ʳʳ໴ʳʳܫʳʳ। T E S T R E P O R T ٽ८ᒳᇆ ˔˿˿̂̌̆ʳˡ̂ˁ ˖ˆˉ˃ˇ˕˗ ཚˍֲ ˗˔˧ ̆ ࠌشᏚᕴټጠ ̃́̆̇̅̈̀˸́̇˴̇˼̂́ʳ́˴̀˸ ˫٠ሽᆰ։࣫Ꮪʻ˩˔˖˨˨ˠʳ˫ʳ˥˔ˬʳ˦ˣ ̆˖˧˥ˢ ̊˥˔ˣ ̨ʼ ʳʳʳʳʳʳʳʳʳ˖̂̃̃˸̅ʳ˔˿˿̂̌ ̆ ᇢʳ᧭ʳֱʳऄ ̆̋̃˸̅˼̀˸́̇˴˿ʳ˖̂̈˷˼̇˼̂́ ʳʳʳʳʳʳ֏ʳʳᖂʳʳᇢʳʳ᧭ʳʳʳʻ˖˻˸̀˼˶˴˿ʳ˧˸̆̇˼́˺ʼ ˫ԫᒵ٠ᢜ։࣫ऄʻ˫ʳ̂́˸ʳ˿˼́˸ʳ̆̃˸˶̇̅˴ʳ˴́˴˿̌̆˼̆ʳ̀˸̇˻̂˷ʳʼ ᇢޗᒳᇆ ˠ˴̇˸̅˼˴˿ʳˡ̂ˁ ᇢޗټጠ ˠ˴̇˸̅˼˴˿ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳᎭٽ८ ᙔ ሩ ᠛ ʻ˭́ʼ ʻ˦́ʼ ʻˣ˵ʼ ʻˡ˼ʼ ᥳ श ᙐ ᔬ ʻ ̇˸ʼ ʻ˦˼ʼ ʻˠ́ʼ ʻ˦˵ʼ ˲˲˲˲˲˲˲˲˲˲ᛷʻˣʼ ˲˲˲˲˲˲˲˲˲˲ ˲˲˲˲˲˲˲˲˲˲ ໂ ု הࠡ ʻˢ̇˻˸̅̆ʼ ˲˲˲˲˲˲˲˲˲˲ ˗˟˔ˁˈˁˈ̀̀ ᓐᜣᎮ്ഏ௏ ׷፦᛾ܴ.໳ል ޗᔆᢞࣔ.ᛷॹᎭ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳޗᔆᢞࣔˀ ̨˗ˣ ̆ SPECIFICATION FOR APPROVAL ˗ˢ˖˨ˠ ̆ˡ˧ˍ A30178B001 ˦˧ˬ˟ ̆Κʳ 200к 30V RG-178B/U SIZE: ʳʳʳ 7/0.102 SCCS RECOGNIZED: ΓWONDERFUL WIRE CABLE CO.,LTDʳ OFFICEΚ72WU KONG 6TH ROAD, WU KU IND. DISTRICT TAIPEI HSIEN,TAIWAN TELΚ(02)22988033 FAXΚ(02)22988031-2 FACTORYΚ17 PEI YUAN ROAD, CHUNG-LI IND. PARK TAIWAN, R.O.C. TELΚ(03)4527777 FAXΚ(03)4517214 Γ WONDERFUL WIRE CABLE CO., LTD SPECIFICATION STYLE 200к 30V COAXIAL DOCUMENT NO : A30178B001 SIZERG-178B/U ESTABLISHED DATE: 2000/06/29 STANDARD : MIL-C-17 SizeAWG30 Material---- Silver-Coated Copper Clad Steel Conductors No.----7 Conductors Sizemm0.102 Conductor O.D.mm0.30 Average Thicknessmm0.28 Diametermm0.86 Material----FEP Insulation Color----Clear Material----Silver-Coated Copper Constructionmm16/3/0.10 Braid Coverage%95 Average Thicknessmm0.25 Diameter mm 1.80̈́0.05 Material----FEP Jacket Color----Brown Marking M17/93-RG178B/U WONDERFUL Drawing AK001/210X297/1.0 PAGE : 1 EDITION:1.0 REVISEDDATE: MAKER: CONFIRM: APPROVAL: ΓWONDERFUL WIRE CABLE CO., LTD SPECIFICATION Electrical & Physical Properties ItemRG-178B/U Rating Temp Voltage 200к 30V Conductor Resistance 838.0 OHM/KM/20к MAX. Insulation Resistance 100 MEGA OHM/KM MIN. Dielectric Strength AC 1.0 KV/Minute Spark Test 0.5 KV Tensile Strength 2500 PSI MIN.( 1.76 Kg / Ӄф) Unaged Elongation200% MIN. Tensile StrengthUNAGED MIN.75%(168HRS×232к) Insulation Aged Elongation UNAGED MIN.75%(168HRS×232к) Tensile Strength 2500 PSI MIN.( 1.76 Kg / Ӄф) Unaged Elongation200% MIN. Tensile StrengthUNAGED MIN.75%(168HRS×232к) Jacket Aged Elongation UNAGED MIN.75%(168HRS×232к) Nom. Impedance 50 Ohms VSWRMAX. 1.3 at 0.4G~3GHz Nom. Vel. of Prop. 69.5% Flame Test VW-1 OK 50MHz 100MHz 400MHz 900MHz 1.8GHz3GHz Attenuation (dB/100m) 34.445.991.8139.4207.5308.2 AK001/210X297/1.0 PAGE : 2 EDITION : 1.0 REVISED DATE : MAKER : CONFIRM : APPROVAL : RoHS REPORT INDEX NAME ࠎ ᚨ ೸ RoHS report 1 CON 1-1 BRASS ૻֆ׹ڶ८᥆ՠᄐैٝܓࠋټ CE/2008/B0420 1-2 ጤ՗ ૻֆ׹ڶ८᥆ՠᄐैٝܓࠋټ CE/2008/B0424 1-3 ߤػ ؀᨜ፋٽ֏ᖂ঴ैٝڶૻֆ׹ CE/2008/C1561 2 CABLE-RG178 2-1 ؆๯ WONDERFUL HI-TECH CO., LTD. CE/2009/11501C ʳ 2-2 FEP WONDERFUL HI-TECH CO., LTD. CE/2008/C7175 ʳ 2-3 Silver-plated steel copper WONDERFUL HI-TECH CO., LTD. CE/2008/C4566 ʳ 3 HINGE/BASE-PA757 CHI MEI CORPORATION KA/2008/C1958

Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 90 Rev. 00 APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. EUT Specification EUT Wireless PCI Express Adapter Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power IEEE 802.11b mode: 12.70 dBm (18.62 mW) IEEE 802.11g mode: 13.58dBm (22.80 mW) draft 802.11n Standard-20 MHz Channel mode: 13.74 dBm (23.65 mW) draft 802.11n Wide-40 MHz Channel mode: 13.57 dBm (22.75 mW) Antenna gain (Max) 2 dBi (Numeric gain: 1.58) Evaluation applied MPE Evaluation* SAR Evaluation N/A Remark: 1. The maximum output power is 13.58dBm (22.80 mW) at 2437MHz (with 1.58 numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 91 Rev. 00 Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 92 Rev. 00 IEEE 802.11b mode: EUT output power = 18.62mW Numeric Antenna gain = 1.58 Æ Power density = 0.0058 mW / cm 2 IEEE 802.11g mode: EUT output power = 22.80 mW Numeric Antenna gain = 1.58 Æ Power density = 0.0071 mW / cm2 draft 802.11n Standard-20 MHz Channel mode: EUT output power = 23.65 mW Numeric Antenna gain = 1.58 Æ Power density = 0.0074mW / cm2 draft 802.11n Wide-40 MHz Channel mode: EUT output power = 22.7 mW Numeric Antenna gain = 1.58 Æ Power density = 0.0071 mW / cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.)

Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 95 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Wireless PCI Express Adapter Model: WPE71RL Trade Name: PRO-NETS / Speed Com+ / Jet Com Issued to PRO-NETS TECHNOLOGY CORPORATION 7F, No.95, Li-De St., Chung Ho City 235, Taipei, Taiwan R.O.C. Issued by Compliance Certification Services Inc. No. 11, Wu-Gong 6 th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 2 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION....................................................................................................3 2. EUT DESCRIPTION ...........................................................................................................................4 3. TEST METHODOLOGY ....................................................................................................................5 3.1 EUT CONFIGURATION........................................................................................................................5 3.2 EUT EXERCISE....................................................................................................................................5 3.3 GENERAL TEST PROCEDURES.............................................................................................................5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ........................................................6 3.5 DESCRIPTION OF TEST MODES...........................................................................................................7 4. INSTRUMENT CALIBRATION........................................................................................................8 4.1 MEASURING INSTRUMENT CALIBRATION......................................................................................8 4.2 MEASUREMENT EQUIPMENT USED .........................................................................................9 4.3 MEASUREMENT UNCERTAINTY .............................................................................................10 5. FACILITIES AND ACCREDITATIONS ........................................................................................11 5.1 FACILITIES .......................................................................................................................................11 5.2 EQUIPMENT......................................................................................................................................11 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.....................................................................................12 6. SETUP OF EQUIPMENT UNDER TEST .......................................................................................13 6.1 SETUP CONFIGURATION OF EUT.......................................................................................................13 6.2 SUPPORT EQUIPMENT ...............................................................................................................13 7. FCC PART 15.247 REQUIREMENTS.............................................................................................14 7.1 6DB BANDWIDTH.............................................................................................................................14 7.2 PEAK POWER....................................................................................................................................22 7.3 AVERAGE POWER............................................................................................................................30 7.4 BAND EDGES MEASUREMENT ................................................................................................38 7.5 PEAK POWER SPECTRAL DENSITY....................................................................................................55 7.6 SPURIOUS EMISSIONS.................................................................................................................63 7.7 RADIATED EMISSIONS ..............................................................................................................70 7.8 POWERLINE CONDUCTED EMISSIONS...............................................................................................87 APPENDIX I RADIO FREQUENCY EXPOSURE ...............................................................................90 APPENDIX II PHOTOGRAPHS OF TEST SETUP .............................................................................93 Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 3 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: PRO-NETS TECHNOLOGY CORPORATION 7F, No.95, Li-De St., Chung Ho City 235, Taipei, Taiwan R.O.C. Equipment Under Test: Wireless PCI Express Adapter Trade Name: PRO-NETS / Speed Com+ / Jet Com Model: WPE71RL Date of Test: February 9 ~ March 2, 2010 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT id…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 92 Rev. 00 APPENDIX II PHOTOGRAPHS OF TEST SETUP Conducted Emissions Setup Photos Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 93 Rev. 00 Radiated Emissions Setup Photos Compliance Certification Services Inc. Report No.: T100129204-RP1 FCC ID: RXZ-WPE71RL Date of Issue: March 8, 2010 Page 94 Rev. 00 Powerline Conducted Emissions Setup Photos