TW4-AT202-900MWireless IP Camera

Project No.: 0803C021 Page 2 of 16 Neutron Engineering Inc. TX Sample:AT202-900 0803C021 0803C021 13 Project No.: 0803C021 Page 3 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 4 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 5 of 16 Neutron Engineering Inc. 0803C021 0803C021 3 Project No.: 0803C021 Page 6 of 16 Neutron Engineering Inc. 0803C021 3 Project No.: 0803C021 Page 2 of 16 Neutron Engineering Inc. TX Sample:AT202-900 0803C021 0803C021 13 Project No.: 0803C021 Page 3 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 4 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 5 of 16 Neutron Engineering Inc. 0803C021 0803C021 3

Project No.: 0803C021 Page 7 of 16 Neutron Engineering Inc. 0803C021 0803C021 3 Project No.: 0803C021 Page 8 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 9 of 16 Neutron Engineering Inc. 0803C021 3 0803C021 Project No.: 0803C021 Page 10 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 11 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 12 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 13 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 14 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 15 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 16 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 7 of 16 Neutron Engineering Inc. 0803C021 0803C021 3 Project No.: 0803C021 Page 8 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 9 of 16 Neutron Engineering Inc. 0803C021 3 0803C021 Project No.: 0803C021 Page 10 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 11 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 12 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 13 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 14 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 15 of 16 Neutron Engineering Inc. 0803C021 0803C021 Project No.: 0803C021 Page 16 of 16 Neutron Engineering Inc. 0803C021 0803C021

Report No.: NEI-FCCP-1-0803C021 Page 2 of 38 Neutron Engineering Inc. Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: NEI-FCCP-1-0803C021 Page 3 of 38 Neutron Engineering Inc. Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 9 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.5 DESCRIPTION OF SUPPORT UNITS 11 4 . EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 MEASUREMENT INSTRUMENTS LIST 12 4.1.3 TEST PROCEDURE 13 4.1.4 DEVIATION FROM TEST STANDARD 13 4.1.5 TEST SETUP 13 4.1.7 TEST RESULTS 14 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 MEASUREMENT INSTRUMENTS LIST 17 4.2.3 TEST PROCEDURE 18 4.2.4 DEVIATION FROM TEST STANDARD 18 4.2.5 TEST SETUP 19 4.2.6 EUT OPERATING CONDITIONS 19 4.2.7 TEST RESULTS (Between 30 – 1000 MHz) 20 4.2.8 TEST RESULTS (Above 1000 MHz include fundamental frequency) 22 4.2.9 TEST RESULTS (Restricted Bands Requirements) 30 5 . BANDWIDTH TEST 34 5.1 APPLIED PROCEDURES / LIMIT 34 5.1.1 MEASUREMENT INSTRUMENTS LIST 34 5.1.2 TEST PROCEDURE 34 5.1.3 DEVIATION FROM STANDARD 34 5.1.4 TEST SETUP 34 5.1.5 EUT OPERATION CONDITIONS 34 5.1.6 TEST RESULTS 35 Report No.: NEI-FCCP-1-0803C021 Page 4 of 38 Neutron Engineering Inc. Table of Contents Page 6 . EUT TEST PHOTO 37 Report No.: NEI-FCCP-1-0803C021 Page 5 of 38 Neutron Engineering Inc. 1. CERTIFICATION E q u i p m e n t : WIRELESS IP CAMERA Trade Name : AEE Model Name : AT202-900 A p p l i c a n t : SHENZHEN AEE WIRELESS TECHNOLOGY CO.,LTD Date of Test : Mar. 06, 2008 ~ Mar. 18, 2008 Te s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANCI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-0803C021) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: NEI-FCCP-1-0803C021 Page 6 of 38 Neutron Engineering Inc. 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.249 Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Report No.: NEI-FCCP-1-0803C021 Page 7 of 38 Neutron Engineering Inc. 2.1 TEST FACILITY The test facilities used to collect the test data in this report is C01/OS02 at the location of No.132-1, Lane 329, Sec. 2, Palain Road, Shijr City, Taipei, Taiwan. Neurtron's test firm number is: 95335. 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 A. Conducted Measurement : Test Site Method Measurement Frequency Range U，(dB) NOTE C01 ANSI150 KHz ~ 30MHz 1.94 B. Radiated Measurement : Test Site Method Measurement Frequency Range Ant. H / V U，(dB) NOTE OS-01 ANSI30MHz ~ 200MHz V 3.82 30MHz ~ 200MHz H 3.60 200MHz ~ 1,000MHz V 3.86 200MHz ~ 1,000MHz H 3.94 OS-02 ANSI30MHz ~ 200MHz V 2.48 30MHz ~ 200MHz H 2.16 200MHz ~ 1,000MHz V 2.50 200MHz ~ 1,000MHz H 2.66 Report No.: NEI-FCCP-1-0803C021 Page 8 of 38 Neutron Engineering Inc. 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Equipment WIRELESS IP CAMERA Trade Name AEE Model Name AT202-900 OEM Brand/Model No. N/A Model Difference N/A Product Description The EUT is a WIRELESS IP CAMERA. Operation Frequency: 902~928 MHz Product Class: Class 1 Receiver Class: Class 3 Modulation Type: FM Number Of Channel 2 CH, Please see Note 2. Antenna Designation: Antenna Gain(Peak) Please see Note 3. Output Power: -22.28dBm Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Channel List Please refer to the Note 2. Power Source DC Voltage supplied from AC/DC adapter Brand name:IE Model name:ILD35-08-0300S Power Rating #AC/DC A…

Text truncated - open the document above for the full version.

Report No.: NEI-FCCP-1-0803C021 Page 37 of 38 Neutron Engineering Inc. 6. EUT TEST PHOTO Conducted Measurement Photos Report No.: NEI-FCCP-1-0803C021 Page 38 of 38 Neutron Engineering Inc. Radiated Measurement Photos Report No.: NEI-FCCP-1-0803C021 Page 37 of 38 Neutron Engineering Inc. 6. EUT TEST PHOTO Conducted Measurement Photos Report No.: NEI-FCCP-1-0803C021 Page 38 of 38 Neutron Engineering Inc. Radiated Measurement Photos