U4A-AHGUHF00AH13 Communication Hub

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 Manual Aperio Hub Installation & Integration Instructions WFMN5A 11MAR 2011 Copyright © 2011, ASSA ABLOY All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY is prohibited. EMEA Form: AAWL-260 01/31/11 Copyright © 2011, ASSA ABLOY All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY is prohibited. WFMN5A • PAGE 2 CHAPTER 1: TECHNICAL SPECIFICATIONS ...............................................................................................................................3 CHAPTER 2: SYSTEM OVERVIEW .................................................................................................................................................3 Introduction .............................................................................................................................................................................3 System Description ..................................................................................................................................................3 The Aperio Programming Application ..................................................................................................................3 CHAPTER 3: INSTALL THE COMMUNICATION HUB ..............................................................................................................4 Instructions ..............................................................................................................................................................................4 AH20 Integration(Wiegand) ..............................................................................................................................................5 AH20 DIP Switch Configuration ............................................................................................................................5 AH20 DIP Switch Configuration Table ..................................................................................................................6 Connections for AH20 (J100) .................................................................................................................................6 Connections for AH20 (J103) .................................................................................................................................7 Tamper Switch (AH20) ............................................................................................................................................7 AH13/AH30 Integration (RS485) ......................................................................................................................................7 AH13/AH30 DIP Switch Configuration .................................................................................................................8 AH13/AH30 DIP Switch Configuration Table .......................................................................................................8 Connections for AH13/AH30 ..................................................................................................................................9 Select EAC Address ................................................................................................................................................................9 RS485 Bus Connection ......................................................................................................................................................10 Physical Hub Installation ..................................................................................................................................................11 Communication Hub Adapter Plate Insatllation .............................................................................................11 Hub LED Indication .............................................................................................................................................................12 Table of Contents FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected. • Consult the dealer or an experienced radio/TV technician for help.” Industry Canada: This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne…

Text truncated - open the document above for the full version.

Americas Division 110 Sargent Drive New Haven, CT 06511 USA Phone: +1 203 821-5714 Fax: +1 203 603-5981 Email: [email protected] Steven Pfalzgraf Applications Engineer March 9, 2011 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: I hereby appoint Sam Wismer at Advanced Compliance Solutions, Inc. to act as our agent in the preparation of an application for equipment authorization of FCC ID:U4A-AHGUHF00 to the FCC Rules and Regulations. I certify that all exhibits contained within this filing properly describe the device or system for which authorization is sought. I further certify that appropriate arrangements have been made to assure that production units of this equipment bearing the name and FCC ID:U4A-AHGUHF00 listed in this application will continue to comply with the Commission's requirements. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Sincerely, Steven Pfalzgraf Applications Engineer

Advanced Compliance Solutions – 5015 B.U. Bowman Drive, Buford, GA 30518 Phone: (770) 831-8048 Fax: (770) 831-8598 March 30, 2011 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: Assa Abloy respectfully requests confidentiality of certain materials provided with the submission of the AH13 under FCC ID: U4A-AHGUHF00 in accordance with FCC Regulations 0.459. The confidentiality request applies to the following exhibits: 10-0344.W06.11.A – Schematics.pdf 10-0344.W06.11.A – System Block Diagram.pdf 10-0344.W06.11.A – Theory of Operation.pdf The AH13 has been developed at considerable effort and expense by Assa Abloy. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company’s business advantage. I appreciate your assistance in this matter. Sincerely, Sam Wismer Vice President, Technology Agent

5015 B. U. Bowman Dr. Buford, GA 30518 March 17, 2011 ACS TCB 5015 B.U. Bowman Drive Buford, GA 30518 Re: FCC ID: U4A-AHGUHF00 To Whom It May Concern: The following application is submitted on behalf of our client, Assa Abloy Inc, for evaluation of their model AH13 for certification under FCC Part 15.247. The AH13 operates in the 2.4GHz band and acts as a communication hub in an industrial lock system. The AH13 was tested in full to the requirements of the aforementioned rules and was found to be in compliance. Sincerely, Sam Wismer Vice President, Technology Advanced Compliance Solutions, Inc.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 External Photos Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 2 Figure 1: Top View Figure 2: Side View Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 3 Figure 3: Back View Figure 4: Back View

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 Label Information Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 2 Figure 1: Label Location REFERENCE .75 2.00 AH13 FCC LABEL LABEL TEXT: MODEL: AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. 52-1307 NOTES: PRINT: BLACK TYPE ON WHITE LABEL.1. MATERIAL: AVERY UL SPECIAL #39 PERMAGRIP OR EQUIVALENT. 2. FONT: ARIAL 6 PT.3. 0.125" RADII MAY BE ADDED TO CORNERS.4. REVISIONS ZONEREV.DESCRIPTIONDATEAPPROVED AORIGINAL RELEASE PER PCP DWG No. SH A 12 B REV 12 52-1307 A 1 1/64 1 .XXX .005 .XX .01 FRACTION ANGLE TOLERANCE 52-1307-00 6/9/09 6/8/09 3/7/11 JAF GL MB 3/7/11 PW CONFIDENTIAL CHECKED BY/DATE 1of 1 A TITLE: SIZE SCALE: INTERPRET DRAWING PER ANSI Y14.5M -1994 THIS DOCUMENT IS THE CONFIDENTIAL PROPERTY OF SARGENT MANUFACTURINGAND IS NOT TO BE REPRODUCED, USED OR DISCLOSED BY ANYONE WITHOUT THE EXPRESS WRITTEN PERMISSION OF THE SARGENT MANUFACTURING COMPANY. REV MAT'L ART. MFG ENG/DATE A PROD CTRL/FNL REL FNL APPROVAL/DATE DWG No. UNLESS OTHERWISE SPECIFIED ALL DIMENSION ARE IN INCHES. FNL APPROVAL/DATE SARGENT Manufacturing Company SHEET: DRAWN BY/DATE FCC LABEL, AH13 52-1307 1:1 APERIO PROFILE 100 Sargent Drive New Haven, CT 06511 - 6/11/09 - NAM Form Rev. 30Jan2006 SEE NOTES

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 Internal Photos Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 2 Figure 1: PCB Front Figure 2: PCB Front Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 3 Figure 3: PCB Back

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 RF Exposure Model: AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 2 General Information: Applicant: Assa Abloy ACS Project: 10-0344 Device Category: Mobile Environment: General Population/Uncontrolled Exposure Technical Information: Antenna Type: PCB Antenna Gain: 2dBi Maximum Transmitter Conducted Power: 1.91dBm, 1.55mW Maximum System EIRP: 3.91dBm, 2.46mW Exposure Conditions: Greater than 20 centimeters MPE Calculation The Power Density (mW/cm 2 ) is calculated as follows: S = 2 4R PG  Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) MPE Calculator for Mobile Equipment Limits for General Population/Uncontrolled Exposure* 24051.911.001.5521.585 200.0005 Power De nsity (mW/cm^2) Dista nce (cm) Transmit Frequency (MHz) Radio Power (dBm) Power Density Limit (mW/Cm2) Radio Power (mW) Ante nna Gain (dBi) Antenna Gain (mW eq.) Installation Guidelines The installation manual should contain text similar to the following advising how to install the equipment to maintain compliance with the FCC RF exposure requirements: RF Exposure In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 centimeters will be maintained. Conclusion This device complies with the MPE requirements by providing adequate separation between the device, any radiating structure and the general population.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Test Report FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 Test Begin Date: October 11, 2010 Test End Date: October 12, 2010 Report Issue Date: March 15, 2011 FOR THE SCOPE OF ACCREDITATION UNDER LAB Code 200612-0 This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Reviewed by: Kirby Munroe Director, Wireless Certifications ACS, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 21 pages 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 TABLE OF CONTENTS 1 GENERAL ............................................................................................................................................ 3 1.1 PURPOSE.......................................................................................................................................... 3 1.2 PRODUCT DESCRIPTION................................................................................................................... 3 1.3 TEST METHODOLOGY AND CONSIDERATIONS................................................................................. 3 2 TEST FACILITIES.............................................................................................................................. 4 2.1 LOCATION....................................................................................................................................... 4 2.2 LABORATORY ACCREDITATIONS/RECOGNITIONS/CERTIFICATIONS................................................ 4 2.3 RADIATED EMISSIONS TEST SITE DESCRIPTION.............................................................................. 5 2.3.1 Semi-Anechoic Chamber Test Site .......................................................................................... 5 2.3.2 Open Area Tests Site (OATS) ................................................................................................. 6 2.4 CONDUCTED EMISSIONS TEST SITE DESCRIPTION........................................................................... 7 3 APPLICABLE STANDARD REFERENCES.................................................................................... 7 4 LIST OF TEST EQUIPMENT............................................................................................................ 8 5 SUPPORT EQUIPMENT .................................................................................................................... 9 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM ........................................................... 9 7 SUMMARY OF TESTS ..................................................................................................................... 10 7.1 ANTENNA REQUIREMENT – FCC: SECTION 15.203 ....................................................................... 10 7.2 POWER LINE CONDUCTED EMISSIONS – FCC: SECTION 15.207 IC: RSS-GEN 7.2.4...................... 10 7.2.1 Measurement Procedure....................................................................................................... 10 7.2.2 Measurement Results ............................................................................................................ 10 7.3 6DB / 99% BANDWIDTH – FCC: SECTION 15.247(A)(2) IC: RSS-210 A8.2(A).............................. 12 7.3.1 Measurement Procedure....................................................................................................... 12 7.3.2 Measurement Results ............................................................................................................ 12 7.4 PEAK OUTPUT POWER REQUIREMENT - FCC SECTION 15.247(B)(3) IC: RSS-210 A8.4(4)........... 14 7.4.1 Measurement Procedure....................................................................................................... 14 7.4.2 Measurement Results ............................................................................................................ 14 7.5 BAND-EDGE COMPLIANCE AND SPURIOUS EMISSIONS-FCC 15.247D IC:RSS-210 2.6, A8.5 ....... 14 7.5.1 Band-Edge Compliance of RF Conducted Emissions........................................................... 15 7.5.1.1 Measurement Procedure ................................................................................................................... 15 7.5.1.2 Measurement Results ....................................................................................................................... 15 7.5.2 RF Conducted Spurious Emissions....................................................................................... 16 7.5.2.1 Measurement Procedure ................................................................................................................... 16 7.5.2.2 Measurement Results ....................................................................................................................... 16 7.5.3 Radiated Spurious Emissions (Restricted Bands) - FCC Sec. 15.205 IC: RSS-210 2.6........ 18 7.5.3.1 Measurement Procedure ................................................................................................................... 18 7.5.3.2 Duty Cycle Correction ..................................................................................................................... 18 7.5.3.3 Measurement Results ....................................................................................................................... 18 7.5.3.4 Sample Calculation: ................................................................................................…

Text truncated - open the document above for the full version.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0344.W06.11.A Manufacturer: Assa Abloy Model: AH13 Test Setup Photos Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 2 Figure 1: Radiated Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 3 Figure 2: Radiated Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 4 Figure 3: Radiated Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 5 Figure 4: Radiated Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 6 Figure 5: Radiated Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 7 Figure 6: Radiated Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 8 Figure 7: Conducted Emissions Model(s): AH13 FCC ID: U4A-AHGUHF00 IC: 6982A-AHGUHF00 ACS Report: 10-0344.W06.11.A Advanced Compliance Solutions Page 9 Figure 8: Conducted Emissions