U4A-SCYICLS0S-Series iClass Lock

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model: S1-IA/IK, S2-IA/IK Manual Model S1-IA/IK A7764B 10/10 Copyright 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Installation Instructions Profile Series v.S1 PoE Mortise Lock 1-800-810-WIRE • www.sargentlock.com • A7764B Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. 10/15/10 1 2 3 4 5 6 7 Table of Contents Warning ...................................................................................2 General Description .................................................................3 Hardware Specifications .........................................................3 Electronic Specifications .........................................................3 Installation Wiring Overview ...................................................3 Installation Wiring ...................................................................4 Parts Breakdown .....................................................................8 Lock Installation ....................................................................10 Operational Check ................................................................17 8 9 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1 Warning Warning SARGENT Mfg. Co. v.S Series locksets utilizing a door position switch (DPS) are not rated for, or intended for use in life safety applications. ! FCC: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Industry Canada: Statement: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifi- cations were met. This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée. 10/15/10 1-800-810-WIRE • www.sargentlock.com • A7764B 3 Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. Profile Series v.S1 PoE Mortise Lock General Description The SARGENT Profile Series v.S1 Mortise Lock is available with either an HID® 125 kHz prox or 13.56 MHz iCLASS® technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet) technology as a proven alternative to traditional access control installations.The v.S1 is a self-contained microprocessor-controlled access control product with non-volatile memory. It uses the existing network cable to communicate with access control systems. The v.S1 lock holds a total of 2400 different user codes. • Using PoE technology coupled with third party software, this v.S1 online lock offers a complete, integrated access control system. • The Profile Series v.S1 Mortise lock may be used for both indoor and outdoor applications. A weather-protective gasket is recommended for outdoor applications. HID and iCLASS are registered trademarks of HID Global Corporation. Electronic Specifications Hardware Specifications 3 4 2 Installation Wiring Overview 5 Supplied by Others A. PoE Frame harness assembly B. PoE data hinge from McKinney (patent pending) C. PoE Door harness* from McKinney D. Profile Series S1 PoE Lock * Door width determines length Network Cable Network Switch (802.3af) • 2,400 users per lock; 10,000 event audit trail • Multiple time zone and holiday access scheduling • Centralized lock management • Real time door status monitoring • Complete lockset with on-board memory • Available without keypad (Prox/iCLASS only) • ADA compliant • Latch: One-piece stainless steel, 3⁄4"projection • Deadbolt: One-piece hardened stainless steel • Guardbolt: Stainless steel, non-handed • Case - 12 gauge, heavy duty, wrought steel • Inside leve…

Text truncated - open the document above for the full version.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model: S1-IA/IK, S2-IA/IK Manual Model S2-IA/IK A7786E 10/10 Copyright 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Installation Instructions Profile Series v.S2 WiFi Mortise Lock 1-800-810-WIRE • www.sargentlock.com • A7786E Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. 10/15/10 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning 1 1 2 3 4 5 6 7 Table of Contents Warning ...................................................................................2 General Description .................................................................3 Hardware Specifications .........................................................3 Electronic Specifications .........................................................3 Installation Wiring Overview ...................................................3 Lock Wiring ..............................................................................4 Parts Breakdown .....................................................................5 Installation Instructions ..........................................................7 Operational Check ................................................................15 8 9 FCC: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Industry Canada: Statement: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifi- cations were met. This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée. To comply with “Fire Listed” doors, the batteries must be replaced with alkaline batteries only. SARGENT Mfg. Co. v.S Series locksets utilizing a door position switch (DPS) are not rated for, or intended for use in life safety applications. ! 10/15/10 1-800-810-WIRE • www.sargentlock.com • A7786E 3 Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. Profile Series v.S2 WiFi Mortise Lock Hardware Specifications General Description The SARGENT Profile Series v.S2 mortise lock is available with either a Prox 125 kHz or an HID iCLASS® 13.56 MHz technology reader. It is designed for applications requiring wireless access control. The v.S2 is a self-contained microprocessor-controlled access control product with non-volatile memory. It is able to utilize the existing wireless LAN (802.11b/g) in order to communicate with the access control system. The v.S2 lock holds a total of 2000 different user codes. This product is operated by six (6) “AA” alkaline batteries or a SARGENT 3267 9VDC power supply. SARGENT mortise locks are designed with quality components to provide high security, performance and durability. The Profile Series v.S2 mortise lock may be used for both indoor and outdoor applications. A weather- protective gasket is recommended for outdoor applications (Provided with unit). HID® and iCLASS® are registered trademarks of HID Global Corporation. Electronic Specifications • Wireless (WiFi 802.11 b/g) online, battery-operated • 2000 Users per lock (more possible with software) • 10,000 Event audit trail • Centralized lock management • Door Status Monitoring* • Easy installation (no need to hardwire) 3 4 2 • Latch: One-piece stainless steel, 3⁄4" projection • Deadbolt: One-piece hardened stainless steel • Guardbolt: Stainless steel, non-handed • Handed: Easily field reversible without opening case • Case: 12-gauge, heavy duty wrought steel • UL Listed (3 hours) • Input Power: DC 9V, 1.5A (6 AA alkaline batteries or optional hard-powered) • Lockdown ca…

Text truncated - open the document above for the full version.

Steven Pfalzgraf Applications Engineer September 30, 2010 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: I hereby appoint Sam Wismer at Advanced Compliance Solutions, Inc. to act as our agent in the preparation of an application for equipment authorization of FCC ID:U4A-SCYICLS0 to the FCC Rules and Regulations. I certify that all exhibits contained within this filing properly describe the device or system for which authorization is sought. I further certify that appropriate arrangements have been made to assure that production units of this equipment bearing the name and FCC ID:U4A-SCYICLS0 listed in this application will continue to comply with the Commission's requirements. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Sincerely, Steven Pfalzgraf Applications Engineer Americas Division 110 Sargent Drive New Haven, CT 06511 USA Phone: +1 203 821-5714 Fax: +1 203 603-5981 Email: [email protected]

Advanced Compliance Solutions – 5015 B.U. Bowman Drive, Buford, GA 30518 October 11, 2010 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: Assa Abloy, Inc. respectfully requests confidentiality of certain materials provided with the submission of the S1-IA/IK, S2-IA/IK under FCC ID: U4A-SCYICLS0 in accordance with FCC Regulations 0.459. The confidentiality request applies to the following exhibits: 10-0199 – Schematics.pdf 10-0199 – System Block Diagram.pdf 10-0199 – Theory of Operation.pdf The S1-IA/IK, S2-IA/IK has been developed at considerable effort and expense by Assa Abloy, Inc.. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company’s business advantage. I appreciate your assistance in this matter. Sincerely, Sam Wismer Vice President, Technology Agent Phone: (770) 831-8048 Fax: (770) 831-8598

5015 B. U. Bowman Dr. Buford, GA 30518 September 27, 2010 ACS TCB 5015 B.U. Bowman Drive Buford, GA 30518 Re: FCC ID: U4A-SCYICLS0 To Whom It May Concern: The following application is submitted on behalf of our client, Assa Abloy, Inc., for evaluation of their models S1-IA/IK, S2-IA/IK for certification under FCC Part 15.225. The S1-IA/IK, S2-IA/IK models were tested to the full requirements of Part 15.225 with compliant results. The models listed above differ only in the peripheral options such as power and keypad. With the exception of peripheral options, all models are electrically identical in construction and design. FCC ID: U4A-SCYICLS0 can also be collocated with 802.11b/g module, FCC ID: F4AWLNG1. Collocation of both transmitters was evaluated and found to be in compliance. Sincerely, Sam Wismer Vice President, Technology Advanced Compliance Solutions, Inc.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model(s): S1-IA/IK, S2-IA/IK External Photos Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 Figure 1: Front View ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 2 Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 Figure 2: Back View ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 3 Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 Figure 3: Top View ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 4 Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 Figure 4: Side View ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 5 Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 Figure 5: Side View ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 6

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model: S1-IA/IK, S2-IA/IK Label Information 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 1: Model S1-IA/IK Sample Label 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 2: Model S1-IA/IK Sample Label – Warning Statement Figure 3: Model S1-IA/IK Label Location 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 4: Model S2-IA/IK Sample Label 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Figure 5: Model S2-IA/IK Sample Label – Warning Statement Figure 6: Model S2-IA/IK Label Location

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model(s): S1-IA/IK, S2-IA/IK Internal Photos Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 2 Figure 1: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 3 Figure 2: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 4 Figure 3: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 5 Figure 4: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 6 Figure 5: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 7 Figure 6: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 8 Figure 7: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 9 Figure 8: S1 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 10 Figure 9: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 11 Figure 10: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 12 Figure 11: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 13 Figure 12: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 14 Figure 13: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 15 Figure 14: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 16 Figure 15: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 17 Figure 16: S2 Series Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 18 Figure 17: S2 Series

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Test Report FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model(s): S1-IA/IK, S2-IA/IK Test Begin Date: June 22, 2010 Test End Date: July 19, 2010 Report Issue Date: September 27, 2010 FOR THE SCOPE OF ACCREDITATION UNDER LAB Code 200612-0 This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Reviewed by: Kirby Munroe Director, Wireless Certifications ACS, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 20 pages TABLE OF CONTENTS 1 GENERAL ............................................................................................................................................ 3 1.1 PURPOSE ........................................................................................................................................ 3 1.2 PRODUCT DESCRIPTION ................................................................................................................. 3 1.3 TEST METHODOLOGY AND CONSIDERATIONS ................................................................................ 3 2 TEST FACILITIES .............................................................................................................................. 4 2.1 LOCATION ...................................................................................................................................... 4 2.2 LABORATORY ACCREDITATIONS/RECOGNITIONS/CERTIFICATIONS ............................................... 4 2.3 RADIATED EMISSIONS TEST SITE DESCRIPTION ............................................................................. 5 2.3.1 Semi-Anechoic Chamber Test Site ............................................................................................ 5 2.3.2 Open Area Tests Site (OATS) ................................................................................................... 6 2.4 CONDUCTED EMISSIONS TEST SITE DESCRIPTION ......................................................................... 7 3 APPLICABLE STANDARD REFERENCES .................................................................................... 7 4 LIST OF TEST EQUIPMENT ............................................................................................................ 8 5 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM ........................................................... 9 6 SUMMARY OF TESTS ..................................................................................................................... 11 6.1 ANTENNA REQUIREMENT ............................................................................................................ 11 6.2 POWER LINE CONDUCTED EMISSIONS – FCC PART 15.207 / IC RSS-GEN 7.2.2 .......................... 11 6.2.1 Test Methodology ................................................................................................................... 11 6.2.2 Test Results ............................................................................................................................. 11 6.3 RADIATED EMISSIONS – INTENTIONAL RADIATION ..................................................................... 13 6.3.1 In-Band Emissions Limitations – FCC Part 15.225(a),(b),(c) / IC RSS-210 A2.6 ................. 13 6.3.1.1 Test Methodology .......................................................................................................... 13 6.3.1.2 Test Results .................................................................................................................... 13 6.3.2 Out-of-Band Emissions – FCC Part 15.225(d), 15.209, 15.109 / IC RSS-210 2.6 ................. 15 6.3.2.1 Test Methodology .......................................................................................................... 15 6.3.2.2 Distance Correction for Measurements Below 30 MHz – Part 15.31 ............................ 16 6.3.2.3 Test Results .................................................................................................................... 16 6.3.2.4 Sample Calculation: ....................................................................................................... 17 6.4 OCCUPIED BANDWIDTH – FCC PART 15.215(C) / IC RSS-GEN 4.6.1 .......................................... 18 6.4.1 Measurement Procedure ......................................................................................................... 18 6.4.2 Measurement Results .............................................................................................................. 18 6.5 FREQUENCY STABILITY – FCC PART 15.225(E) / IC RSS-210 A2.6 ............................................ 19 6.5.1 Test Methodology ................................................................................................................... 19 6.5.2 Test Results ............................................................................................................................. 20 7 CONCLUSION ................................................................................................................................... 20 Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 3 1 GENERAL 1.1 Purpose The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations and Industry Canada’s Radio Standards Specification RSS-210. 1.2 Product Description The models listed are electronic door locks. These door locks contain an ICLASS 13.56MHz RFID reader and may be co…

Text truncated - open the document above for the full version.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYICLS0 IC: 6982A-SCYICLS0 FCC Rule Part: 15.225 IC Specification: RSS-210 ACS Report Number: 10-0199.W06.11.A Manufacturer: Assa Abloy, Inc. Model(s): S1-IA/IK, S2-IA/IK Test Setup Photos Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 2 Figure 1: S1 Series – Radiated Emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 3 Figure 2: S1 Series – Radiated Emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 4 Figure 3: S1 Series – Radiated Emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 5 Figure 4: S2 Series – Radiated emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 6 Figure 5: S2 Series – Radiated emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 7 Figure 6: S2 Series – Radiated emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 8 Figure 7: S2 Series – Radiated emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 9 Figure 8: S2 Series – Radiated emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 10 Figure 9: S2 Series – Radiated emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 11 Figure 10: S2 Series – AC Power Line Conducted emissions Model(s): S1-IA/IK, S2-IA/IK FCC ID: U4A-SCYICLS0 IC: 6982A- SCYICLS0 ACS Report: 10-0199.W06.11.A Advanced Compliance Solutions Page 12 Figure 11: S2 Series – AC Power Line Conducted emissions