U4A-SCYPROX5Microprocessor Controlled Networked Lock

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 FCC Rule Part: 15.209, 15.249 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0305 Manufacturer: Assa Abloy Model: C2-PA/PK Manual A8122B 8/12 Copyright 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. These installation instructions include Microsoft® Tags that you can scan to view videos of certain installation steps. The Microsoft Tag mobile app is required to scan the Tags. Download the free mobile app at http://gettag.mobi with Aperio ™ Technology Mortise Lock Installation Instructions IN100 Preliminary 1-800-810-WIRE • www.sargentlock.com • A8122B Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. 8/05/12 1 2 3 4 5 6 7 Table of Contents Warning ...................................................................................2 General Description .................................................................3 Specifications ..........................................................................3 System Overview .....................................................................3 Parts Breakdown .....................................................................4 Lock Installation ......................................................................6 Maintenance .........................................................................15 Operational Check ................................................................16 Lock LED Indications ............................................................17 Changes or modifications to this device not expressly approved by ASSA ABLOY could void the user’s authority to operate the equipment. Warning 1 FCC: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Industry Canada: This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée. “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.” Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and SARGENT Manufacturing makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. 8 9 ! Preliminary 8/05/12 1-800-810-WIRE • www.sargentlock.com • A8122B 3 Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. IN100 Mortise Lock Warning: SARGENT Mfg. Co. IN100 …

Text truncated - open the document above for the full version.

Americas Division 110 Sargent Drive New Haven, CT 06511 USA Phone: +1 203 821-5714 Fax: +1 203 603-5981 Email: [email protected] Steven Pfalzgraf Applications Engineer July 30, 2012 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: I hereby appoint Sam Wismer at Advanced Compliance Solutions, Inc. to act as our agent in the preparation of an application for equipment authorization of FCC ID:U4A-SCYPROX5 to the FCC Rules and Regulations. I certify that all exhibits contained within this filing properly describe the device or system for which authorization is sought. I further certify that appropriate arrangements have been made to assure that production units of this equipment bearing the name and FCC ID:U4A-SCYPROX5 listed in this application will continue to comply with the Commission's requirements. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Sincerely, Steven Pfalzgraf Applications Engineer

Americas Division 110 Sargent Drive New Haven, CT 06511 USA Phone: +1 203 821-5714 Fax: +1 203 603-5981 Email: [email protected] Steven Pfalzgraf Applications Engineer July 30, 2012 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 RE: CONFIDENTIALITY REQUEST Gentlemen: ASSA ABLOY Inc. respectfully requests confidentiality of certain materials provided with the submission of the C2-PA/PK under FCC ID: U4A-SCYPROX5 in accordance with FCC Regulations 0.459. The confidentiality request applies to any and all schematics, engineering drawings and operational instructions contained in this filing and included in the following files. ASSA ABLOY Documents: 12-0305 – Schematics.pdf 12-0305 – System Block Diagram.pdf 12-0305 – Theory of Operation.pdf The C2-PA/PK has been developed at considerable effort and expense by ASSA ABLOY Inc. / Sargent Manufacturing. These items are considered as Trade Secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company's business advantage. Sincerely, Name:Steven PfalzgrafSignature: Title:Applications EngineerDate: July 30, 2012

5015 B. U. Bowman Dr. Buford, GA 30518 August 10, 2012 ACS TCB 5015 B.U. Bowman Drive Buford, GA 30518 Re: FCC ID: U4A-SCYPROX5 To Whom It May Concern: The following application is submitted on behalf of our client, Assa Abloy, for evaluation of their model C2- PA/PK for certification under FCC Parts 15.209 and 15.249. The C2-PA/PK is a microprocessor controlled networked lock. It uses local wireless communication between the lock and a hub to connect to an access control system. The C2-PA/PK includes a 125kHz proximity reader and a 2.4GHz IEEE 802.15.4 radio. The C2-PA/PK was tested in full to the requirements of the aforementioned rules and was found to be in compliance. Sincerely, Sam Wismer Vice President, Technology Advanced Compliance Solutions, Inc.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 FCC Rule Part: 15.209, 15.249 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0305 Manufacturer: Assa Abloy Model: C2-PA/PK External Photos Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 2 Figure 1: External Photo – Front Figure 2: External Photo – Back Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 3 Figure 3: External Photo – Side Figure 4: External Photo – Side Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 4 Figure 5: External Photo – Top

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 FCC Rule Part: 15.209, 15.249 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0305 Manufacturer: Assa Abloy Model: C2-PA/PK Label Information Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 2 Figure 1: Sample Label and Placement

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 FCC Rule Part: 15.209, 15.249 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0305 Manufacturer: Assa Abloy Model: C2-PA/PK Internal Photos Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 2 Figure 1: Internal Photo Figure 2: Internal Photo Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 3 Figure 3: Internal Photo – Boards Installed Figure 4: Internal Photo – Boards Installed Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 4 Figure 5: Internal Photo Figure 6: Internal Photo Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 5 Figure 7: Internal Photo

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Test Report FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 FCC Rule Part: 15.249 IC Radio Standards Specification: RSS-210 ACS Report Number: 12-0305.W06.2A Manufacturer: Assa Abloy Model: C2-PA/PK Test Begin Date: July 25, 2012 Test End Date: July 26, 2012 Report Issue Date: August 10, 2012 FOR THE SCOPE OF ACCREDITATION UNDER LAB Code 200612-0 This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Reviewed by: Kirby Munroe Director, Wireless Certifications ACS, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 14 pages 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 TABLE OF CONTENTS 1 GENERAL ............................................................................................................................................ 3 1.1 PURPOSE .......................................................................................................................................... 3 1.2 PRODUCT DESCRIPTION ................................................................................................................... 3 1.3 TEST METHODOLOGY AND CONSIDERATIONS ................................................................................. 3 2 TEST FACILITIES .............................................................................................................................. 4 2.1 LOCATION ....................................................................................................................................... 4 2.2 LABORATORY ACCREDITATIONS/RECOGNITIONS/CERTIFICATIONS ................................................ 4 2.3 RADIATED EMISSIONS TEST SITE DESCRIPTION .............................................................................. 5 2.3.1 Semi-Anechoic Chamber Test Site .......................................................................................... 5 2.3.2 Open Area Tests Site (OATS) ................................................................................................. 6 2.4 CONDUCTED EMISSIONS TEST SITE DESCRIPTION ........................................................................... 7 3 APPLICABLE STANDARD REFERENCES .................................................................................... 7 4 LIST OF TEST EQUIPMENT ............................................................................................................ 8 5 SUPPORT EQUIPMENT .................................................................................................................... 9 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM ........................................................... 9 7 SUMMARY OF TESTS ......................................................................................................................10 7.1 ANTENNA REQUIREMENT – FCC: SECTION 15.203 ........................................................................10 7.2 POWER LINE CONDUCTED EMISSIONS – FCC: SECTION 15.207 IC: RSS-GEN 7.2.4 .......................10 7.2.1 Measurement Procedure ........................................................................................................10 7.3 20DB / 99% BANDWIDTH – FCC: SECTION 15.215, IC: RSS-GEN 4.6.1 .........................................10 7.3.1 Measurement Procedure ........................................................................................................10 7.3.2 Measurement Results .............................................................................................................10 7.4 FUNDAMENTAL FIELD STRENGTH – FCC: SECTION 15.249(A) IC: RSS-210 A2.9(A) ....................12 7.4.1 Measurement Procedure ........................................................................................................12 7.4.2 Measurement Results .............................................................................................................12 7.5 RADIATED SPURIOUS EMISSIONS - FCC: SECTION 15.249(A)(D)(E); IC:RSS-210 A2.9(A)(B) ........13 7.5.1 Measurement Procedure ........................................................................................................13 7.5.2 Measurement Results .............................................................................................................13 7.5.3 Sample Calculation: ..............................................................................................................14 8 CONCLUSION ....................................................................................................................................14 Model: C2-PA/PK FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 ACS Report: 12-0305.W06.2A Advanced Compliance Solutions Page 3 1 GENERAL 1.1 Purpose The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations and Industry Canada’s Radio Standards Specification RSS-210. 1.2 Product description The C2-PA/PK is a microprocessor controlled networked lock. It uses local wireless communication between the lock and a hub to connect to an access control system. The C2- PA/PK includes a 125kHz proximity reader and a 2.4GHz IEEE 802.15.4 radio. The report applies to the 2.4GHz IEEE 802.15.4 radio only. A separate test report covers the 125kHz proximity radio operation. Technical Information: Band of Operation: 2405 – 2480 MHz Number of Channels: 16 Modulation Format: O-QPSK Antenna Type/Gain: Chip Antenna, 0.5dBi Gain Operating Voltage: 9 VDC (Battery) Manufacturer Information: Assa Abloy Inc. 110 Sargent Dr. New Haven, CT 06511 Test Sample Serial Number(s): ACS#2 Test Sample Condition: The test samples were pr…

Text truncated - open the document above for the full version.

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Certification Exhibit FCC ID: U4A-SCYPROX5 IC: 6982A-SCYPROX5 FCC Rule Part: 15.209, 15.249 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0305 Manufacturer: Assa Abloy Model: C2-PA/PK Test Setup Photos Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 2 Figure 1: Radiated Emissions Figure 2: Radiated Emissions – Zigbee Model: C2-PA/PKFCC ID: U4A-SCYPROX5IC: 6982A-SCYPROX5 ACS Project: 12-0305Advanced Compliance SolutionsPage 3 Figure 3: Radiated Emissions – 125kHz Prox