U4A-YRHCPZW0Yale Real Living Electronic Zwave Lock

Yale Real Living™ Touchscreen Deadbolt Installation and Programming Instructions For Technical Assistance call Yale at 1-800-810-WIRE (9473) NOTE TO INSTALLER FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT AND VOID THE FACTORY WARRANTY An ASSA ABLOY Group brand P/N AYRD220-INST-FUL Rev B This document is available on our website in printed Spanish and French. Go to www.yalerealliving.com. Click “Product Information & Documentation” and then “Installation Instructions”. Este documento está disponible en español en nuestra página de internet. Vaya a www.yalerealliving.com. Presione “Información del Producto y Documentación” y luego “Instrucciones de Instalación”. Ce document est disponible sur notre site Web dans le français imprimé. Allez à www.yalerealliving.com. Cliquez sur le “ ; Information sur le produit et Documentation” et puis “Installation Instructions”. 2 An ASSA ABLOY Group brand P/N AYRD220-INST-FUL Rev B Warnings .....................................................................................................................2-3 Introduction .....................................................................................................................3 Installation Components and Tools .............................................................................................4 Prepare Lock for Installation .....................................................................................5 Install Lock ............................................................................................................6-7 Programming Programming Features-Menu Keys-Definitions ...................................................8-9 Operation ..........................................................................................................10-12 Miscellaneous Information Return Lock to Programming Defaults ...................................................................13 Hardware Troubleshooting ......................................................................................13 Programming Troubleshooting ...............................................................................14 Replace/Install Cylinder ..........................................................................................15 Sample Pin Code Management Sheets ...........................................................16-17 TABLE OF CONTENTS WARNINGS FCC: FCC ID: U4A-YRHCPZW0 (Z-Wave); U4A-YRHCPZB0 (Zigbee) Model(s): YRDZW, YRDZB This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IMPORTANT: The accuracy of the door preparation is critical for the proper functioning and security of this product. Misalignment can cause performance degradation and a lessening of security. Finish Care: This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting finish. When cleaning is required use a soft, damp cloth. Using lacquer thinner, caustic soaps, abrasive cleaners or polishes could damage the coating and result in tarnishing. Warning: Changes or modifications to this device not expressly approved by Yale Security, Inc. could void the user's authority to operate the equipment. 3 An ASSA ABLOY Group brand P/N AYRD220-INST-FUL Rev B INTRODUCTION The Yale Real Living™ Stand-alone Touchscreen Deadbolt Lock combines a robust lockset with a contemporary electronic aesthetic. Users benefit from an interactive touchscreen that makes day-to-day access effortless, as well as offering voice-guided programming for simple updates to user information in the event of staffing changes or security breaches. Yale Real Living™ is engineered for quick and easy installation and fits in place of a standard deadbolt lock door prep (ANSI/BHMA A156.115). If this is an RF-enabled network lock, it needs to be located within 50 - 100 feet of another network controller. That distance is influenced by objects between the lock and the controller and may be expanded depending on proximity to other RF network devices. Also, if the lock is connected to a network controller, it is recommended that it is programmed through the centralized user interface (PC or hand-held device) to ensure communication between the lock and the controller unit. Industry Canada: Canadian ID: 6982A-YRHCPZW0 (Z-Wave); 6982A-YRHCPZB0 (Zigbee) Model(s): YRDZW, YRDZB This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (…

Text truncated - open the document above for the full version.

Americas Division 110 Sargent Drive New Haven, CT 06511 USA Phone: +1 203 821-5714 Fax: +1 203 603-5981 Email: [email protected] Steven Pfalzgraf Applications Engineer Authority to Act as Agent Date: 4/17/2011 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Thomas T. Smith, Ken Boston and Ryan Urness of LS Research, LLC is authorized to act on our behalf regarding product with FCC ID U4A-YRHCPZW0, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 4/1/2012 By: Steven Pfalzgraf Title: Applications Engineer On behalf of: ASSA ABLOY

Americas Division 110 Sargent Drive New Haven, CT 06511 USA Phone: +1 203 821-5714 Fax: +1 203 603-5981 Email: [email protected] Steven Pfalzgraf Applications Engineer April 15, 2011 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality request for FCC ID: U4A-YRHCPZW0 equipment authorization application documentation. To Whom It May Concern, Pursuant to FCC regulations 0.459, ASSA ABLOY Inc. is respectfully requesting permanent confidential treatment of the following information accompanying this application: Block Diagrams Schematics Bill of Materials Theory Of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Steven Pfalsgraf Applications Engineer ASSA ABLOY, Inc. 110 Sargent Drive New Haven, CT 06511

EXTERNAL PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 1 of 3 Keypad (black area) and physical key shown EXTERNAL PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 2 of 3 Latch side of lock shown representing interior face of the lock system EXTERNAL PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 3 of 3 Battery cover removed from latch side, demonstrating where battery compartment is and location of the radio board and antenna. Battery cover is retained by a screw in the cover

YRDZW Label material is white art p a p er sticker pp Batter cover is retained by screw on product Model YRDZWModel YRDZW

INTERNAL PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 1 of 3 Meandering copper trace PCB antenna shown. The antenna is directly attached to the radio board. Circuit board and antenna assembly shown INTERNAL PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 2 of 3 With respect to placement in the lock, the top of board is shown With respect to placement in the lock, the top of board is shown. “RX” labeled on board is a notation for the test engineer that the unit is programmed for receive mode. Another identical sample was programmed for transmit mode. 8‐pin connector which mates the board to the door lock unit. Only physical connection between the pieces of the system INTERNAL PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 3 of 3 Alternate view of the back side of the board.

W66 N220 Commerce Court ● Cedarburg, WI 53012 ● USA Phone: 262.375.4400 ● Fax: 262.375.4248 www.lsr.com TEST REPORT # 310380 LSR Job #: C-1179 Compliance Testing of: Yale Real Living Deadbolt Test Date(s): Feb 24, 28, April 18, 19, 2011 Prepared For: Assa Abloy Attn: Mark Caterino 100 Sargent Drive New Haven, CT 06511 In accordance with: Federal Communications Commission (FCC) Part 15, Subpart C, Section 15.249 Industry Canada (IC) RSS 210 Annex 2 Transmitters Operating in the Frequency Band 902 MHz – 928 MHz This Test Report is issued under the Authority of: Thomas T. Smith Signature: Date:5.11.11 Test Report Reviewed by: Thomas T. Smith Signature: Date: 5.11.11 Tested by: Peter Feilen, EMC Engineer Signature: Date: 05.11.11 This Test Report may not be reproduced, except in full, without written approval of LS Research, LLC. Prepared For: Assa Abloy EUT: Yale Real Living Deadbolt LS Research, LLC Report # 310380 Model #: YRDZW Template: 15.249 8-11-2010 LSR Job #: C-1179 Serial #: N/A Page 2 of 25 Prepared For: Assa Abloy EUT: Yale Real Living Deadbolt LS Research, LLC Report # 310380 Model #: YRDZW Template: 15.249 8-11-2010 LSR Job #: C-1179 Serial #: N/A Page 3 of 25 TABLE OF CONTENTS EXHIBIT 1: INTRODUCTION 1.1 Scope 3 1.2 Normative References 3 1.3 LS Research, LLC Test Facility 4 1.4 Location of Testing 4 1.5 Test Equipment Utilized 4 EXHIBIT 2: PERFORMANCE ASSESSMENT 2.1 Client Information 5 2.2 Equipment Under Test (EUT) Information 5 2.3 Associated Antenna Description 5 2.4 EUT’s Technical Specifications 6 2.5 Product Description 7 EXHIBIT 3: EUT OPERATING CONDITIONS & CONFIGURATIONS DURING TESTS 3.1 Climate Test Conditions 7 3.2 Applicability & Summary of EMC Emission Test Results 7 3.3 Modifications Incorporated in the EUT for Compliance Purposes 7 3.4 Deviations & Exclusions from Test Specifications 7 EXHIBIT 4: DECLARATION OF CONFORMITY 8 EXHIBIT 5: RADIATED EMISSIONS TESTING 5.1 Test Setup 9 5.2 Test Procedure 9 5.3 Test Equipment Utilized 10 5.4 Test Results 10 5.5 Calculation of Radiated Emissions Limits 11 5.6 Radiated Emissions Test Data Chart 13 5.7 Screen Captures – Radiated Emissions Test 15 EXHIBIT 6: OCCUPIED BANDWIDTH 6.1 Limits 19 6.2 Method of Measurements 19 6.3 Test Data 19 6.4 Screen Capture – Occupied Bandwidth 19 EXHIBIT 7: BAND-EDGE MEASUREMENTS 7.1 Method of Measurements 20 7.2 Screen Captures 20 APPENDICES APPENDIX A: TEST EQUIPMENT LIST 22 APPENDIX B: TEST STANDARDS – RADIO 23 APPENDIX C: UNCERTAINTY STATEMENT 24 Prepared For: Assa Abloy EUT: Yale Real Living Deadbolt LS Research, LLC Report # 310380 Model #: YRDZW Template: 15.249 8-11-2010 LSR Job #: C-1179 Serial #: N/A Page 4 of 25 EXHIBIT 1. INTRODUCTION 1.1 SCOPE References: FCC Part 15, Subpart C, Section 15.249 and 15.209 FCC Part 2, Section 2.1043 paragraph (b)1. RSS GEN and RSS 210 Annex 2 Title: FCC : Telecommunication – Code of Federal Regulations, CFR 47, Part 15. IC : Low-power License-exempt Radio-communication Devices (All Frequency Bands): Category I Equipment Purpose of Test: To gain FCC and IC Certification Authorization for Low- Power License-Exempt Transmitters. Test Procedures: Both conducted and radiated emissions measurements were conducted in accordance with American National Standards Institute ANSI C63.4 – American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. Environmental Classification:  Commercial, Industrial or Business  Residential 1.2 NORMATIVE REFERENCES Publication Title 47 CFR, Parts 0-15 (FCC) Code of Federal Regulations - Telecommunications RSS 210 Low-power License-exempt Radio-communication Devices (All Frequency Bands): Category I Equipment ANSI C63.4 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. CISPR 16-1-1 Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1: Measuring Apparatus. CISPR 16-2-1 Specification for radio disturbance and immunity measuring apparatus and methods. Part 201: Conducted disturbance measurement. Prepared For: Assa Abloy EUT: Yale Real Living Deadbolt LS Research, LLC Report # 310380 Model #: YRDZW Template: 15.249 8-11-2010 LSR Job #: C-1179 Serial #: N/A Page 5 of 25 1.3 LS Research, LLC TEST FACILITY LS Research, LLC is accredited by A2LA (American Association for Laboratory Accreditation) to conform to ISO/IEC 17025, 2005 “General Requirements for the Competence of Calibration and Testing Laboratories”. LS Research, LLC’s scope of accreditation includes all test methods listed herein, unless otherwise noted. A copy of the accreditation may be accessed on our web site: www.lsr.com. Accreditation status can be verified at A2LA’s web site: www.a2la2.net. 1.4 LOCATION OF TESTING All testing was performed at LS Research, LLC, W66 N220 Commerce Court, Cedarburg, Wisconsin, 53012 USA, utilizing the facilities listed below, unless otherwise noted. List of Facilities Located at LS Research, LLC:  Compact Chamber  Semi-Anechoic Chamber  Open Area Test Site (OATS) 1.5 TEST EQUIPMENT UTILIZED A complete list of equipment utilized in testing is provided in Appendix A of this test report. Calibration dates are indicated in Appendix A. All test equipment is calibrated in accordance with A2LA standards. Prepared For: Assa Abloy EUT: Yale Real Living Deadbolt LS Research, LLC Report # 310380 Model #: YRDZW Template: 15.249 8-11-2010 LSR Job #: C-1179 Serial #: N/A Page 6 of 25 EXHIBIT 2. PERFORMANCE ASSESSMENT 2.1 CLIENT INFORMATION 2.2 EQUIPMENT UNDER TEST (EUT) INFORMATION The following information has been supplied by the applicant. Product Name: Yale Real Living Deadbolt Model Number: YRDZW Serial Number: N/A 2.3 ASSOCIATED ANTENNA DESCRIPTION Meandering trace PCB antenna. Manufacturer Name: Assa Abloy Address: 110 Sargent Drive, New Haven, CT 06511 Contact Name: Mark Caterino Pr…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 1 of 3 3m measurement setup TEST SETUP PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 2 of 3 TEST SETUP PHOTOS Company Name Assa Abloy Model # YRDZW FCC ID # U4A‐YRHCPZW0 IC # 6982A‐YRHCPZW0 Page 3 of 3 1m measurement setup